Cannice Technology W6 Bluetooth headset User Manual

Shenzhen Cannice Technology Co., Ltd. Bluetooth headset Users Manual

user manual

Do not use   in thunderstorm weather, the   may not work properly in the condition, and increase the risk of being hitby lightning . earphone earphoneHard resetRING COLLARMUSIC WIRELESS HEADSETW754   INSTRUCTIONMusicMusic play / pausePress Multifunction button once to play / pause music. (Some phones may require you to start a media player first) .Track backward/forward Press and hold Volume '-' button for about 2 seconds to skiptrack backward.Press and hold Volume '+' button for about 2 seconds to skiptrack forward.Switch Music and Call When a call rings during a music playing, the music automatically pauses to allow you to answer or ignore the call. Once the call is ignored or ends, the music is resumed.(Need media player support).Clear paired listIf the earphone can't power on even when fully charged, reset earphoneas follows:1. Press down multifunction button and connect earphone to the USBport of a PC or an USB power adaptor.2. Continue to press and hold the multifunction button until earphonepower on. The earphone is now reset.1.When the earphone is connected to the phone, then disconnectedthe phone, at the same time the earphone will enter into pairing mode.  2.Press volume "+" and volume "-" button at the same time until LEDflashes blue, then LED flashes red and blue alternately, the paired listwas cleared, the earphone will enter pairing mode after power onnext time.Mute on/offPress the Volume "-" for about 2 seconds to mute on/off.Voice dial (Need phone support)In standby mode double press the multifunction button wait forphone prompt and then tell the phone to dial the name of a storedcontact.Switch between the earphone and phonePress the multifunction button for about 2 seconds during a call, the call will be switched to the mobile phone, redo this operation again, the call will be switched to the earphone. CallAnswer a callPress the Multifunction button or Volume "+" or Volume "-" once.Reject a callPress and hold the Multifunction button for about 2 seconds.Press the Multifunction button once.End a callReject the new call hold the current callDuring the call there is a new call, press and hold the multifunctionbutton for about 2 seconds to reject a new call, keeping the active call.End current call and answer new callWhen a new call rings during a call, press the Multifunction button once to answer new call and end current call simultaneously.On hold current call and answer new callWhen a new call rings during a call, Double the Multifunction button to hold current call and answer new call. Safety and careUsing   at high to moderate volumes for extended periods  of time will result in permanent hearing damage .It is advised youkeep volume levels moderate to low at all times for your safety. earphoneDo not use any corrosive cleaner/oil to clean the  .earphoneIf the   comes in contact with liquids, quickly wipe away .If submersed in water, do not turn the earphone on until  completely dried.Tips: liquid submersion voids the warranty.earphoneKeep the   and packaging out of reach of children .earphoneEnable voice prompts: enter pairing mode: Press the volume button for 3 seconds, the white LED lights flashes 3 times;"+" Disable voice prompts: enter pairing mode: Press the volume -  button for 3 seconds, the red LED lights flashes 3 times."" Do not use  while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.E  may not work properly under high temperature or high humidity conditions.arphoneBasic operationStatus indicatorInstructionPower onPower offStandbyIncoming callPairingLED statusWhite light flashes four timesRed light flashes four timesFlashes white quicklyFlashes red and white alternately      /Voice prompts Power onPower off//Battery lowBattery low Blink red Charging Stays on red while charging /Volume up/down Press the volume "+" to turn volume upPress the volume "-" to turn volume down Power onPower offPress and hold Multifunction button for about 1.5 seconds. The earphone says "power on"  and the LED flashes white four timesPress  and hold Multifunction button for about 5 seconds. Theearphone says "power off"  and the LED flashes red four times.Tips: effective range, earphone disconnects with phone. Earphone will power off automatically once no active for 15 minutes.When the distance between the earphone and phone is beyondStays on white after fully charged.Blink white once  every 5 seconds
Windows Phone 8a.On your phone, open the Settings menu.b.Select Bluetooth. If Bluetooth is off, turn it on.   The Phone will search for new devices automatically.Pair one phonePair one phone1. Make sure the earphone is turned off end within 1 meter of yourphone, presss and hold the Multifunction button until the earphonepower on, then release Multifunction button, the earphone reconnectthe device in the paired device list, if fail, the earphone auto enterpairing mode. 2.Activate Bluetooth on your phone (See below for more details).PairingiPhoneAndroid phonea.On your phone, open the Settings menu.b.Select Bluetooth. If Bluetooth is off, turn it on. The iPhone will search for new devices automatically.a.On your phone, open the Settings menu.b.Select Bluetooth (For old Android phone, Bluetooth is found in the Wireless & Networks). If Bluetooth is off, turn it on. Select Search for Devices if your phone does not automatically search for new devices.Note: When the earphone and phone have been paired once, they will automatically connect when the earphone is on and Bluetooth is activated on the phone.Following items are includedStart hereProduct overview1. Volume - / Track backward 2. Multifunction button3. Volume + / Track forward4. Talking mic 5. Charge jack6. Battery7. Status indicator3. Select " ". If your phone asks, enter 0000 (four zeros) forthe pass code or accept the connection. The LED indicator stops flashing red and white once successfully paired, you hear "Connection successful". Some phone list an option to "Play through earphone", select to use theearphones.LEOPHILE POP Pair another phoneMultipoint technology enables you to pair another phone and take a call from either.Calling switchWhen the first phone call rings, press the Multifunction buttononce to answer the call, if the seconds call rings at this moment,you can answer the second phone by double click Multifunction button, and on hold the first phone call.Charging  Your new   has enough power to pair and make a few calls. It takes 2 hours to fully charge the earphone; while charging, the battery indicator light is red, the indicator light flashes white  once charging is complete.  Note: The lifetime of the battery will be significantly reduced if your earphone is left uncharged for a long period. We recommend that you recharge your earphone at least once a month. earphoneBluetoothONSearchBluetoothONSearchBluetoothONConnectONConnectBluetooth126345USB cableEar cushionsuse guide7LEOPHILE POPLEOPHILE POPLEOPHILE POPTo paired first smart phone power off the earphone, then power on and paired the second phone and then power off and restart the earphone, it will reconnect to second paired phone automatically for the first pairedphone link, your shall manual operation from the 1st smart phone's bluetooth has paired list menu and select and click the “LEOPHILE POP"LEOPHILE POP
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

Navigation menu