Cannice Technology W6 Bluetooth headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3631618
Application ID	EKtGvTMuBiM9zINfMahNPg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.76kB (109476 bits)
Date Submitted	2017-11-08 00:00:00
Date Available	2017-11-08 00:00:00
Creation Date	2017-10-13 16:06:10
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2017-10-13 16:06:25
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	Zaihui

Safety and care
Enable voice prompts: enter pairing mode: Press the volume "+"
button for 3 seconds, the white LED lights flashes 3 times;
Disable voice prompts: enter pairing mode: Press the volume " - "
button for 3 seconds, the red LED lights flashes 3 times.
Clear paired list
1.When the earphone is connected to the phone, then disconnected
the phone, at the same time the earphone will enter into pairing mode.
2.Press volume "+" and volume "-" button at the same time until LED
flashes blue, then LED flashes red and blue alternately, the paired list
was cleared, the earphone will enter pairing mode after power on
next time.
Hard reset
If the earphone can't power on even when fully charged, reset earphone
as follows:
1. Press down multifunction button and connect earphone to the USB
port of a PC or an USB power adaptor.
2. Continue to press and hold the multifunction button until earphone
power on. The earphone is now reset.
Press the Multifunction button or Volume "+" or Volume "-"
once.
Reject a call
Press and hold the Multifunction button for about 2 seconds.
End a call
Press the Multifunction button once.
End current call and answer new call
When a new call rings during a call, press the Multifunction
button once to answer new call and end current call
simultaneously.
On hold current call and answer new call
When a new call rings during a call, Double the Multifunction
button to hold current call and answer new call.
Reject the new call hold the current call
During the call there is a new call, press and hold the multifunction
button for about 2 seconds to reject a new call, keeping the active call.
Do not use while driving a car, cycling, operating machinery, or
performing other activities that require hearing surrounding sounds.
Do not use earphone in thunderstorm weather, the earphone may
not work properly in the condition, and increase the risk of being hit
by lightning .
Mute on/off
Press the Volume "-" for about 2 seconds to mute on/off.
Switch between the earphone and phone
Press the multifunction button for about 2 seconds during a call,
the call will be switched to the mobile phone, redo this
operation again, the call will be switched to the earphone.
Voice dial (Need phone support)
In standby mode double press the multifunction button wait for
phone prompt and then tell the phone to dial the name of a stored
contact.
RING COLLAR
MUSIC WIRELESS HEADSET
Earphone may not work properly under high temperature or high
humidity conditions.
Do not use any corrosive cleaner/oil to clean the earphone.
If the earphone comes in contact with liquids, quickly wipe away .If
submersed in water, do not turn the earphone on until completely dried.
Tips: liquid submersion voids the warranty.
Keep the earphone and packaging out of reach of children .
W754 INSTRUCTION
Music
Call
Answer a call
Using earphone at high to moderate volumes for extended periods
of time will result in permanent hearing damage .It is advised you
keep volume levels moderate to low at all times for your safety.
(Need media player support).
Music play / pause
Press Multifunction button once to play / pause music. (Some
phones may require you to start a media player first) .
Track backward/forward
Press and hold Volume '-' button for about 2 seconds to skip
track backward.
Press and hold Volume '+' button for about 2 seconds to skip
track forward.
Switch Music and Call
When a call rings during a music playing, the music automatically
pauses to allow you to answer or ignore the call. Once the call is
ignored or ends, the music is resumed.
Basic operation
Status indicator
Instruction
LED status
Voice prompts
Power on
White light flashes four times
Power on
Power off
Red light flashes four times
Power off
Standby
Blink white once every 5 seconds
Pairing
Flashes red and white alternately
Incoming call
Flashes white quickly
Battery low
Blink red
Battery low
Charging
Stays on red while charging
Stays on white after fully charged.
Volume up/down Press the volume "+" to turn volume up
Power on
Press the volume "-" to turn volume down
Press and hold Multifunction button for about 1.5 seconds. The
earphone says "power on" and the LED flashes white four times
Power off
Press and hold Multifunction button for about 5 seconds. The
earphone says "power off" and the LED flashes red four times.
Tips: When the distance between the earphone and phone is beyond
effective range, earphone disconnects with phone. Earphone will
power off automatically once no active for 15 minutes.
3. Select "LEOPHILE POP". If your phone asks, enter 0000 (four zeros) for
the pass code or accept the connection. The LED indicator stops flashing
red and white once successfully paired, you hear "Connection successful".
Some phone list an option to "Play through earphone", select to use the
earphones.
Windows Phone 8
a.On your phone, open the Settings menu.
b.Select Bluetooth. If Bluetooth is off, turn it on.
The Phone will search for new devices automatically.
Bluetooth
Bluetooth
ON
LEOPHILE POP
ON
LEOPHILE POP
Pair another phone
Multipoint technology enables you to pair another phone and take a
call from either.
To paired first smart phone power off the earphone, then power on and
paired the second phone and then power off and restart the earphone,
it will reconnect to second paired phone automatically for the first paired
phone link, your shall manual operation from the 1st smart phone's
bluetooth has paired list menu and select and click the “LEOPHILE POP"
Calling switch
When the first phone call rings, press the Multifunction button
once to answer the call, if the seconds call rings at this moment,
you can answer the second phone by double click Multifunction
button, and on hold the first phone call.
Bluetooth
ON
Bluetooth
ON
LEOPHILE POP
LEOPHILE POP
Search
Search
Connect
Connect
Pairing
Start here
Following items are included
Product overview
Charging
Your new earphone has enough power to pair and make a few
calls. It takes 2 hours to fully charge the earphone; while charging,
the battery indicator light is red, the indicator light flashes white
once charging is complete.
1. Volume - / Track backward
2. Multifunction button
3. Volume + / Track forward
Note: The lifetime of the battery will be significantly reduced if
your earphone is left uncharged for a long period. We recommend
that you recharge your earphone at least once a month.
4. Talking mic
5. Charge jack
6. Battery
7. Status indicator
use guide
Ear cushions
Pair one phone
Note: When the earphone and phone have been paired once,
they will automatically connect when the earphone is on and
Bluetooth is activated on the phone.
Pair one phone
1. Make sure the earphone is turned off end within 1 meter of your
phone, presss and hold the Multifunction button until the earphone
power on, then release Multifunction button, the earphone reconnect
the device in the paired device list, if fail, the earphone auto enter
pairing mode.
2.Activate Bluetooth on your phone (See below for more details).
iPhone
USB cable
a.On your phone, open the Settings menu.
b.Select Bluetooth. If Bluetooth is off, turn it on.
The iPhone will search for new devices automatically.
Android phone
a.On your phone, open the Settings menu.
b.Select Bluetooth (For old Android phone, Bluetooth is found in the
Wireless & Networks). If Bluetooth is off, turn it on. Select Search for
Devices if your phone does not automatically search for new devices.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2017:10:13 16:06:10+08:00
Modify Date                     : 2017:10:13 16:06:25+08:00
Metadata Date                   : 2017:10:13 16:06:25+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:64F92A5DEDAFE711B238949B2162D326
Instance ID                     : uuid:ada6e137-1b46-4365-9d78-dcab93a41b75
Derived From Instance ID        : uuid:39d360c8-1f40-462b-8b72-7bf9beb6eb70
Derived From Document ID        : uuid:919d66f9-f96d-42fa-bed1-7ad3c520cc94
Format                          : application/pdf
Creator                         : Zaihui
Title                           : W754鑻辨枃璇存槑涔v1
Page Count                      : 3
Author                          : Zaihui

EXIF Metadata provided by EXIF.tools