Canon Color Imageclass Mf8080Cw Quick Start Guide Starter

2014-07-05

: Canon Canon-Color-Imageclass-Mf8080Cw-Quick-Start-Guide canon-color-imageclass-mf8080cw-quick-start-guide canon pdf

Open the PDF directly: View PDF .
Page Count: 39

Preface

2Installing the Machine

P. 6

3Configuring and

Connecting the Fax

P. 16

Appendix

P. A-1

Connecting to a Computer

and Installing the Drivers

P. 20

Read this guide first.

Please read this guide before operating this

product.

The remarks for important safety

instructions are described in “Basic

Operation Guide.” Read the guide also.

After you finish reading this guide, store it in

a safe place for future reference.

Starter Guide

Setting Up the Machine to Suit Your Needs

Copy

Media Print Fax Settings from

a Computer

Scan

PC Fax

Scan

PC Fax

Registering the Sender Information P. 16

Fax Settings

Settings are now complete.

Selecting the Receive Mode P. 17

Connecting a Telephone Line P. 18

Preparing to Use the Toner Cartridges P. 8

Connecting the Power Cord P. 12

Specify settings related to the Copy, Print, Fax, PC Fax, Scan, Remote UI and Media Printing functions. Follow the steps in the

flowchart below.

Start settings.

Carrying the Machine to the Installation Site and Removing the Packing Materials P. 6

Loading Paper P. 10

Settings for paper sizes and paper types are required after turning the power ON.

P. 15

Remote

Network

Connection

USB

Connection

: available

Copy Print Fax

(PC Fax) Scan Remote UI ADF Wireless LAN

MF8080Cw

Available Features

Required Operations

Turning ON the Machine and

Specifying the Initial Settings

Country and Region Settings

P. 12

The machine offers the following features.

Language Settings Time Zone Settings

Current Time Settings Color Correction

For Windows

For Macintosh

Checking the IP Address P. A-3

Installing the Software P. 27

Installing the Software P. 22

Connecting a USB Cable P. 28

Connecting a USB Cable P. 25

Connecting to Wired LAN/Wireless LAN

Settings in a Computer

Checking the Supplied Accessories

1. Confirm that all the supplied

accessories are contained in the box.

If an item is missing or damaged, please contact our Canon

Authorized Service Facilities or the Canon Customer Care

Center.

The machine unit

The following parts are

already installed.

• Paper cassette

• Toner cartridges

Power cord

User Software CD-ROM

Legal dust cover

Limited Warranty Notice

Telephone cable

Shortcut key label

Starter Guide (This manual)

Wireless LAN Setting Guide Basic Operation Guide

Supplied Toner Cartridges

The average yield of the toner cartridge that comes with the machine is as follows.

Canon Cartridge 116 Black Starter Average yield of K (Black) toner cartridge*1: 800 sheets

Canon Cartridge 116 Yellow Starter

Canon Cartridge 116 Magenta Starter

Canon Cartridge 116 Cyan Starter

Average yield of Composite Y (Yellow), M (Magenta), and C (Cyan)

toner cartridges*1: 800 sheets

*1 The average yield is on the basis of “ISO/IEC 19798”*2 when printing A4 size paper with the default print density setting.

*2 “ISO/IEC 19798” is the global standard related to “Method for the determination of toner cartridge yield for color printers and multi-function devices

that contain printer components” issued by ISO (International Organization for Standardization).

The average yield of the replacement toner cartridge varies from that of the supplied toner cartridge.

To purchase replacement toner cartridges, see “About Replacement Toner Cartridges” in the e-Manual.

About the LAN cable

The machine does not come with a LAN cable,

router, or hub. Have them ready as needed.

• Use a Category 5 or higher twisted pair cable.

• If you want to connect the machine to a 100BASE-TX

Ethernet network, all the devices to be connected to the

LAN must support 100BASE-TX.

About the USB cable

The machine does not come with a USB cable.

Have cables ready as needed.

Registration Card

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

Preface

Installing the Machine

P. 6

Conguring and

Connecting the Fax

P. 16

Appendix

P. A-1

Connecting to a Computer

and Installing the Drivers

P. 20

Read this guide rst.

Please read this guide before operating this

product.

The remarks for important safety

instructions are described in “Basic

Operation Guide.” Read the guide also.

After you nish reading this guide, store it in

a safe place for future reference.

Starter Guide

Read this guide before setting up the wireless LAN

This guide describes problems and countermeasures for troubles

of the wireless LAN setup procedure and problems encountered

during the configuration.

After you finish reading this guide, store it in a safe place for

future reference.

Starter Guide

Troubleshooting

XXXXXX

XXXXXXXXX

？

P.2-1P.1-1

ireless LAN Setting Guide

For procedures other

than printer installation

and wireless LAN setup,

please refer to the

[Starter Guide].

Setting the

wireless LAN

Quic k V iew - Per for m U se ful Tas ks

Page

Befo re Us ing th e M ach in e

P.1-1

Docu men t and Pa per H and lin g

P.2-1

Copying

P.3-1

Printing from a Computer

P.4-1

Registering Destinations

in the Address Book

P.5-1

Usin g t he Fa x F unc tio ns

P.6-1

Usin g t he Sc an Fun ct ion s

P.7-1

Maintenance

P.8-1

Troubleshooting

P.9-1

Regis tering /

Setti ng the Va rio us Fun cti on s

-1

Appe ndi x

-1

Be sure to read the manual before using

the machine.

Keep the manual for future reference.

Network Setting Procedure

Security Functions

Searching the Installation and

Connection Procedure

See the Starter Guide.

See the e-Manual.

User Software CD-ROM

Searching in Detail

Basic Operation Guide

Toner cartridge

User Software CD-ROM

About the Drivers and Software

The drivers and software included in the CD-ROM supplied with this machine are as follows.

MF Drivers

Printer driver You can print from an application to the machine once you have the printer driver

installed on your computer.

Printer Drivers:

UFRII LT/UFRII LT (XPS) Printer Driver

• UFRII LT (XPS) is for Windows only.

Fax driver If you install the fax driver on your computer, you can select “Print” from an application,

select the Canon fax driver as a printer, and specify the output destination and options.

The fax driver converts the data into an image that conforms to standard fax protocols so

that the data can be printed or saved using the recipient’s fax machine.

Scanner driver You can use the machine as a scanner once you have the scanner driver installed on your

computer.

Network Scan Utility You need this utility software to use the machine as a network scanner. It is automatically

installed along with the scanner driver.

MF Toolbox

MF Toolbox* The MF Toolbox provides a group of commands for you to open a scanned image in an

application, send it as an e-mail attachment file, store it on the hard disk, etc.

Others

Presto! PageManager You can handle scanned images in many ways using this software.

: Supported

: Not supported

Windows 2000/XP Windows Vista/7 Windows Server

2003

Windows Server

2008

Mac OS X

(version 10.4.9 or later)

Printer driver (UFRII LT)

Printer driver (UFRII LT

(XPS))*2

Fax driver

Scanner driver

Network Scan Utility

MF Toolbox

Presto! PageManager

*1 Supported only over network connections.

*2 For 32-bit operating systems only. For Windows Vista/Server 2008, Service Pack 1 or later must be installed.

Supported Operating Systems

* Some features of the MF Toolbox for Macintosh may differ from those of the MF Toolbox for Windows. For details, see the Mac Scanner Driver Guide.

About the Supplied Manuals

Read this manual first.

This manual describes the settings for

setting up the machine and installing

the software. Be sure to read this

manual before using the machine.

Starter Guide

• Preface

• Installing the Machine

• Configuring and Connecting the Fax

• Connecting to a Computer and Installing the Drivers

• Appendix

e-Manual

Read the desired chapter

to suit your needs.

The e-Manual is categorized by subject to

find desired information easily.

For details about using the e-Manual, refer

to “Using the e-Manual“ in “Appendix.”

• Important Safety

Instructions

• Basic Operation

• Copy

• Fax*1

• Print*1

• Scan*1

• Network Settings

• Security

• Setting and Managing from

Computer

• Troubleshooting

• Maintenance

• Setting Menu List

• Specifications

* The e-Manual is included in the

User Software CD-ROM.

This manual

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

Preface

Installing the Machine

P. 6

Conguring and

Connecting the Fax

P. 16

Appendix

P. A-1

Connecting to a Computer

and Installing the Drivers

P. 20

Read this guide rst.

Please read this guide before operating this

product.

The remarks for important safety

instructions are described in “Basic

Operation Guide.” Read the guide also.

After you nish reading this guide, store it in

a safe place for future reference.

Starter Guide

• Setting the wireless LAN

• Troubleshooting

• Appendix

Basic Operation Guide

Read this manual next.

This manual describes the basic use of

the machine.

• Before Using the Machine

• Document and Paper Handling

• Copying

• Printing from a Computer

• Registering Destinations in the

Address Book

• Using the Fax Functions

• Using the Scan Functions

• Maintenance

• Troubleshooting

• Registering/Setting the

Various Functions

• Appendix

Qu ick Vi ew- Pe rf orm Us efu l T ask s

Page

Be for e U sin g t he Ma chi ne

P.1-1

Do cum ent an d P ap er Han dli ng

P.2-1

Copying

P.3-1

Printing from a Computer

P.4-1

Registering Destinations

in the Address Book

P.5-1

Us ing th e F ax Fu nct ion s

P.6-1

Us ing th e S can F unc tio ns

P.7-1

Maintenance

P.8-1

Troubleshooting

P.9-1

Reg ist eri ng/

Set tin g t he Var iou s F un cti ons

-1

Ap pe nd ix

-1

Be sure to read the manual before using

the machine.

Keep the manual for future reference.

Network Setting Procedure

Security Functions

Searching the Installation and

Connection Procedure

See the Starter Guide.

See the e-Manual.

User Software CD-ROM

Searching in Detail

Basic Operation Guide

Wireless LAN Setting Guide

Read this manual with the

Starter Guide.

This manual describes the wireless

LAN setup procedures and the causes

and solutions for troubles you might

face during setup. Be sure to read

this manual when connecting the

machine to a wireless LAN.

Read this guide before setting up the wireless LAN

This guide describes problems and countermeasures for troubles

of the wireless LAN setup procedure and problems encountered

during the configuration.

After you finish reading this guide, store it in a safe place for

future reference.

Starter Guide

Troubleshooting

XXXXXX

XXXXXXXXX

？

P.2-1P.1-1

ireless LAN Setting Guide

For procedures other

than printer installation

and wireless LAN setup,

please refer to the

[Starter Guide].

Setting the

wireless LAN

*1 If you are using Macintosh, see the following Driver Guides or Help for more details on these functions. You can

find the driver guides in the following locations on the User Software CD-ROM.

• Mac UFR II Printer Driver Installation Guide → [Documents] - [Print] - [Guide] - [index.html]

• Mac Fax Driver Installation Guide → [Documents] - [FAX] - [Guide] - [index.html]

• Mac Scanner Driver Guide → [Documents] - [Scan] - [Guide] - [index.html]

Determining the Installation Site

1. Take the machine out of the plastic bag, and then carry to the

installation site.

Hold the grips. Carry the machine with two or more people.

Carrying the Machine to the Installation Site

and Removing the Packing Materials

Paper

cassette

Feeder cover Feeder

Rear cover

in. (mm)

48 3/8 (1229)

(100)

26 1/2 (674)

31 1/2 (801)

• This product is designed for indoor use at a distance of 164’/50 m or less from an access point (the distance may vary depending on the communication

speed or environmental conditions). Keep it at an appropriate distance.

• Check whether or not anything is blocking communication. The signal may be degraded when passing through walls or floors. Install accordingly.

• Radio wave interference may occur if any radio wave emitting equipment (i.e. microwave oven) is located near the product and its radio waves are in

the same frequency band as the radio waves used by the wireless LAN. Keep the product as far as possible from sources of radio wave interference.

Notes on wireless LAN

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

2. Remove the packing materials. * The packing materials may be changed in form or placement, or may be

added or removed without notice.

Remove the packing materials. Remove the tape.

Remove the packing materials.

Remove the packing materials

with tape.

Close the rear cover. Open the feeder.

(A) * Remove these packing

materials later.

* Do not remove the

cap (A) on the USB

port at this stage.

Uncap when making a

USB connection.

Open the rear cover.

Close the feeder.

Make sure that the following packing materials are all removed from the machine.

Check!

Tape x 12

Packing materials with tape x5

1. Open the front cover and pull out the toner cartridge tray.

Press the lever.

Pull out the toner cartridge tray.

Open the front cover.

2. Pull out the sealing tapes on the four toner cartridges.

Make sure that the following packing materials

are all removed from the toner cartridges.

Check!

Sealing tape x4

Remove.

Hold down the toner cartridge. Pull the sealing tape completely out. The full length of

the sealing tape is approximately 20 in. (50 cm).

Preparing to Use the Toner Cartridges

3. Push the toner cartridge tray back in, and then close the front cover.

Push in the toner cartridge tray. Close the front cover.

The serial number is indicated on the label located inside the

front cover of the machine (a character string of 3 letters and a

5-digit number).

Write down the information here (on the

back cover of the Basic Operation Guide).

Write down the serial number and purchase date on the back cover of the Basic Operation Guide enclosed in the package.

You need this information when contacting your local authorized Canon dealer or Canon Customer Care Center.

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

Serial No.

Serial Number

FT5-XXXX (XXX) XXXXXXXXXX © CANON INC. 2011 PRINTED IN xxxxxx

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

CANON MARKETING JAPAN INC.

16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan

CANON U.S.A., INC.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

CANON EUROPA N.V.

Bovenkerkerweg, 59-61, 1185 XB Amstelveen, The Netherlands

CANON CHINA CO. LTD.

15F Jinbao Building No.89, Jinbao Street, Dongcheng District, Beijing 100005, PRC

CANON SINGAPORE PTE LTD

1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632

CANON AUSTRALIA PTY LTD

1 Thomas Holt Drive, North Ryde, Sydney NSW 2113, Australia

CANON GLOBAL WORLDWIDE SITES

http://www.canon.com/

Serial No.

Date of Purchase

2. Slide the paper guides, and load the paper.

1. Pull out the paper cassette.

Loading Paper

When loading Legal size paper

When changing the size of the paper to be loaded

Be sure to register the paper size.

At factory shipment, the machine’s default settings are configured for LTR paper size and Plain 2 paper type.

Proceed to “Setting the Paper Size and Type” on p. 15.

Hold the lock release lever.

Hold the paper cassette with both hands.

Slide the side paper guides.

Spread the paper guides a little

wider than the actual paper

width.

Hold the lock release lever and

slide the paper guide at the front

center.

Spread the paper guide a little

wider than the actual paper width.

Adjust the length of the paper cassette.

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

When loading Legal size paper

When the paper cassette is inserted with it extended,

the front side of the paper cassette is not flush with the

front surface of the machine as shown in the figure.

Set the Legal dust cover on the paper cassette.

Set the paper under the hooks.

Load limit mark.

Hooks

Make sure that the paper stack does not

go over the line of the load limit mark.

Check!

Up to here

3. Set the paper cassette.

Hold the lock release lever and slide the

paper guide at the front center.

Align the paper guide securely

against the edge of the paper.

When using envelopes

For details on how to load media,

see “Basic Operation Guide.”

Load the paper.

Load the paper that it aligns

with the rear side of the paper

cassette.

Slide the side paper guides.

Align the paper guides securely

against the edges of the paper.

Turning ON the Machine and Specifying the

Initial Settings

1. Turn ON the machine.

The machine enters the Sleep mode to conserve energy

when no operations are performed for a certain period

of time. To cancel the Sleep mode, press the [ ] (Energy

Saver) key on the operation panel.

Connecting the Power Cord

Do not connect the USB cable. Connect the USB cable when installing the software.

Make sure that the machine is switched OFF. Plug the power cord into the power socket.

Plug the power cord into an AC power outlet.

2. Specify initial settings.

Press [ ] or [ ] to select, and

then press [OK].

Read the messages, and then press [OK].

Open back cover; see

if orange packing

material is removed.

Check that tabs/tape

are removed from

toner cartridge.

Check that paper is

loaded in Drawer 1.

Next NextNext

Language

English

French

Spanish

Portuguese

Press [ ] or [ ] to select, and

then press [OK].

Select Country/Region

United States (US)

Canada (CA)

Brazil (BR)

Mexico (MX)

Enter the date and time, and then

press [OK].

Press [OK].

Press [ ] or [ ] to select, and

then press [OK].

• Move the cursor with [ ] or [ ].

• Press [ ] or [ ] to select the number

or switch to <AM> or <PM>.

Current Time Settings

01/01/2011 12:52 AM

Adjust image to

reproduce original

color?

Yes No

Time Zone Settings

GMT-5:00

GMT-4:00

GMT-3:30

GMT-3:00

• You can perform color correction by

selecting <Yes> to obtain optimum copy

results or printout results. For details

on the procedure, see the following

“Performing Color Correction.”

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

Copy: Press Start

100% LTR

Density: 0

Original Type: Text

...

Copy Ratio: 100% Di

...

The initial screen appears when

the initial setup is complete.

If <Open the back cover, remove the protective

sheet.> appears

The packing materials inside the back cover

have not been removed. For details on how to

remove them, refer to step 2 (p.7) in “Carrying

the Machine to the Installation Site and

Removing the Packing Materials.”

Performing Color Correction

Make sure that paper is

loaded, and then press [OK].

Confirm the procedure for the color correction, and

then press [OK].

Open the feeder.

Place the test chart on the platen glass with the

print side face down.

Place the paper so that the black stripe is at the back

side of the machine.

Close the feeder.

A test chart (adjustment image) is printed.

Press [ ] (Start).

Remove the test chart (adjustment image) placed

on the platen glass in Step .

Check the temperature of the installation site

If the room temperature is low, correction may not be performed properly.

If <Adjustment failed.> appears

• Is the paper loaded correctly?

→Load plain paper or recycled paper of A4/Letter size in the paper cassette.

• Is the test chart placed on the platen glass correctly?

→Place the test chart with the print side face down and the black stripe toward the

back of the machine.

• Has a paper jam occurred?

→Remove the jammed paper.

If you want to perform color correction again, press [ ] (Menu), and then

select the following settings in the following order.

→<Adjustment/Maintenance> → <Auto Gradation Adjustment> → <Copy Image

Adjustment>

Color correction takes approximately 255

seconds.

Supported Paper:

Size: A4, LTR, 16K

Type: Plain, Rec

Steps (Start:Press OK)

1. Print Adj. Image

2. Scan Adj. Image

Step 1

Printing adjustment

image...

Place adjustment

image on the glass

with black side

toward the back.

Press Color to start.

Copy Image Adjustment

Step 2

Scanning adjustment

image...

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

Press [ ]

(Select Paper/Settings).

Press [ ] or [ ] to select, and

then press [OK].

Press [ ] or [ ] to select, and

then press [OK].

Press [ ] or [ ] to select, and

then press [OK].

Press [ ] (Reset) to return to the

standby mode.

Press [ ] or [ ] to select, and

then press [OK].

Select Paper

MP Tray

LTR:Plain 2

Paper Settings

Multi-Purpose Tray

Drawer 1

Paper Size

LTR

LGL

STMT

EXEC

Paper Type

Plain 2 (20 lb Bond-

Recycled

Color

Heavy 1 (25 lb Bond...

Setting the Paper Size and Type

Specifying Initial Settings for the Fax Functions

and Connecting the Telephone Cable

1. Register the fax number and unit name.

Enter information (text, symbols, and numbers)

using the following keys.

# C

Numeric

keys

Entering text, symbols, and numbers

Enter using the numeric keys or [ ] (SYMBOLS).

Key Entry mode: <A> Entry mode: <a> Entry mode: <12>

@ . - _ / 1

ABC abc 2

DEF def 3

GHI ghi 4

JKL jkl 5

MNO mno 6

PQRS pqrs 7

TUV tuv 8

WXYZ wxyz 9

(Not available) 0

(space) @ . / - _ ! ? & $ % # ( ) [ ]{ } < > * + = " , ;

: ' ^ ` | \ ˜ (Not available)

Deleting text, symbols, or numbers

To delete text, numbers, or symbols, press [ ] (Clear).

To delete all text, numbers, or symbols, press and hold [ ] (Clear).

Press [ ]. Press [ ] or [ ] to select,

and then press [OK].

Display “Fax Setup Guide” with the following operations to

perform the settings or connections if selecting <Set up Later>.

[ ] (Menu) → <Fax Settings> → <Fax Setup Guide>.

Press [OK]. Enter.

Press [ ] or [ ] to

select <Apply>, and then

press [OK].

Press [OK]. Enter.

Press [ ] or [ ] to select

<Apply>, and then press [OK].

Entering Text

Changing the entry mode

Press [ ] to select <Entry Mode>, and then

press [OK]. You can also press [ ] (Tone) to

change the entry mode.

Entry mode Text that can be entered

<A> Alphabet (capital letters) and symbols

<a> Alphabet (small letters) and symbols

<12> Numbers

Moving the cursor (Entering a space)

Move the cursor by pressing [ ] or [ ]. To enter

a space, move the cursor to the end of the text,

and then press [ ].

Perform Fax Setup?

Set up Now

Set up Later

telephone number for

this machine.

*Next Screen: Press OK

031234567

<Apply>

(Sender name,

company name, etc.)

*Next Screen: Press OK

ABC

<Apply>

Entry Mode: A

What happens with the unit name

Once the information has been registered, it is printed at

the top of each page that you are sending.

Sending Date/Time

Fax/Telephone Number

(FAX No.)

Page Number

Sender Name

(Unit Name)

Telephone Number

Mark

01/01/2011 02:07 PM FAX 123XXXXXXX CANON P.0001

Operate the machine following the on-screen instructions and perform the following settings and connection.

• Registering the fax number and unit name

• Setting the fax receive mode

• Connecting a telephone line

If you are using pulse dialing, change the line type after specifying the settings.

2. Select the fax receive mode.

The receive mode is set to <Auto>.

→ Proceed to Step 3.

• Receive faxes automatically.

• Does not use the telephone.*

* When the telephone is connected in the auto receive mode, the

telephone rings when receiving a fax or telephone call. You can

answer the telephone while it is ringing. To turn off the telephone

ringer, see “Incoming Ring” in the e-Manual.

Do you want to use

this machine for fax

only (no telephone)?

Yes

Do you want to auto-

receive faxes and

answer phone manually?

Yes

Do you want to use

an answering machine

to answer the phone?

Yes

The receive mode is set to <Fax/Tel Auto Switch>.

→ Proceed to Step 3.

• Receive faxes automatically.*

• Responds to a telephone call by picking up

the handset.

* The telephone rings on incoming calls. To turn off the telephone

ringer, see “Incoming Ring” in the e-Manual.

The receive mode is set to <Answering Machine>.

→ Proceed to Step 3.

• Receive faxes automatically.

• Respond to telephone calls using the

built-in answer function.

• Ring on incoming calls or faxes.

The receive mode is set to <Manual>.

→ Proceed to Step 3.

• Respond to incoming calls or faxes

by picking up the handset.

• Ring on incoming calls or faxes.

You can specify how the machine should operate for a fax call or telephone call.

By answering the prompts that appear on the display, the machine will be set to one of the following four operation modes.

Yes

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

3. Connect the telephone line.

Press [OK].

Connect phone line.

Follow illustrations

on the next screen:

Connect line to A.

*Next : Press OK

Connect phone line.

Follow illustrations

on the next screen

to make connections:

1. Phone line to A

The screen that appears varies depending on the receive mode selected.

Connect the telephone line using the jack.

Press [ ] to select, and then press [OK].

Press [OK] after the

telephone line has been

connected.

Fax settings and connections have been completed.

End Fax Setup

Guide?

NoYes

Restart the machine for the settings to take effect.

Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.

Press [OK].

Turn the main power

OFF and ON to apply

settings.

To connect an external telephone that includes fax

functions

Make sure to disable its automatic fax reception

feature so it does not receive faxes automatically.

Telephone line

connector

Telephone

(B)

(A)

4. Change the line type.

By default, the telephone line type is set to tone dialing. Skip the following steps in the procedure below when you

choose to use tone dialing.

Follow the steps in the procedure below to select pulse dialing.

Contact your local telephone company when you are not sure of the line type that you are using.

Press [ ] (Menu).

Press [ ] or [ ] to select <Fax Settings>, and then press [OK].

Press [ ] or [ ] to select <Basic Settings>, and then press [OK].

Press [ ] or [ ] to select <Select Line Type>, and then press [OK].

Press [ ] or [ ] to select the line type that you are using, and then press [OK].

<Pulse>: Pulse dialing

<Tone>: Tone dialing (Default)

Press [ ] (Menu) to close the menu screen.

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

Select from the following three methods, depending on your environment and devices.

If you are not sure whether the router or access point you are using supports wireless LAN or wired LAN, see the

instruction manual provided with the network device you are using, or contact the manufacturer.

• LAN (Local Area Network)

It is a system that enables the sharing of information by connecting multiple devices such as computers that are within a

limited area, such as a single room or inside the same building, using cables or wireless communication (radio waves).

• Wireless LAN

It is a network that connects multiple devices using wireless communication (radio waves) without using cables. Generally,

it connects to the network using a relay device called a wireless LAN router or access point.

Explanation of Terminology

Connecting to Wireless LAN

Wireless LAN

Connect using wireless communication (radio frequency)

without using a cable.

Connecting to Wired LAN P. 21

Wired LAN

Connect them using a LAN cable.

Connecting via a USB Cable

Connect them using a USB cable.

* A wireless LAN or access point that supports IEEE802.11 (b/g or n) is required.

* Check to make sure that there is a free port for connecting the machine or the

computer you use to the router or hub.

* Use a Category 5 or higher twisted pair cable for the LAN.

Selecting a Method for Connecting to the Machine

USB cable

You need this

Wireless LAN router

access point

You need this

Router

hub

LAN cable

• Windows

Installing with USB Connection P. 24

• Macintosh

Installing the Software P. 27

Use the same procedure for both Windows and Macintosh.

For details, see the separate Wireless LAN Setting Guide.

Use the same procedure for both Windows and Macintosh.

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

The computer and router/hub need to be connected using LAN

cables and the network settings need to be complete.

• For more information, see the instruction manual for the network device you are

using, or contact the networking device manufacturer.

• If the network has not been set up properly, you will not be able to use the machine

on the wired LAN network even if you perform the procedure described below.

Before adding the machine to a wired LAN

• The configuration of your computer or networked device, as well as the router functions, setting methods and security settings, vary depending on your

environment.

• You can connect the machine to either a wireless LAN or wired LAN, but you cannot use both at the same time.

• If using the machine in your office, consult with your network administrator.

Precautions when connecting to a wired LAN

Internet

Router

hub

LAN cable

Connecting to Wired LAN

2. The machine sets the IP address automatically. Wait approximately

two minutes.

If you want to set the IP address manually, see the following.

e-Manual “Setting the IPv4 Address”

e-Manual “Setting the IPv6 Address”

1. Connect the LAN cable.

Connect the cable. Make sure that the

green indicator of

the LAN port is on.

If the indicator is not on

Check the following.

•Whether the machine and router/hub are

connected using a LAN cable

•Whether the power of the machine is turned

About the LAN cable

•The machine does not come with a LAN cable, router,

or hub. Have them ready as needed.

•Use a Category 5 or higher twisted pair cable for the

LAN.

Installing via Network Connection

• For Windows

Installing via Network Connection P. 22

• For Macintosh

Installing the Software P. 27

Installing via Network Connection (For Windows)

2. Turn on the computer, and then log on as a user with

administrative privileges.

3. Install the MF Drivers and MF Toolbox.

If you have already logged on, exit all applications which are running.

* When you are in an IPv6 environment, or when installing the UFRII LT (XPS) printer driver using network connection, you cannot use the

procedure below to install the software. Refer to “Installing the MF Drivers on the WSD Network” in the e-Manual to install the MF Drivers.

* You may not use the scan function in the IPv6 environment.

Insert the CD-ROM. Click.

Click.

Read the contents of the License

Agreement.

Click.

If the top screen does not appear

• Windows 2000, XP, and Server 2003

1. From the [Start] or [start] menu, select [Run].

2. Enter "D:\Minst.exe", and then click [OK].

• Windows Vista, 7, and Server 2008

1. Enter "D:\Minst.exe" in [Search programs and files] or [Start

Search] under the [Start] menu.

2. Press the [ENTER] key on the keyboard.

* The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM

drive name may differ depending on the computer you are using.

Click.

1. Check the following

points.

•The computer and machine are connected via the network.

•The power of the machine is turned ON.

•IP address is properly set up. Proceed to “Checking the IP Address” on p. A-3.

[Easy Installation] performs the installation of the

following software.

• Printer driver

• Fax driver

• Scanner driver

• MF Toolbox

To add the following software and manual to the

installation, select [Custom Installation].

• Presto! PageManager

• e-Manual

e-Manual “Installing the MF Drivers and MF Toolbox”

Click.

* In Windows Server 2003/Server 2008, the

[Select the Type of Connection] screen is not

displayed. Proceed to Step .

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

If no devices are displayed in [Device List]

Perform the following procedure.

1. Check the following.

• The computer and device are connected via the network.

• When the machine is connected to a wireless LAN, the

computer and the wireless LAN router or access point are

also connected.

• The device is turned on.

• The IP address is set correctly.

• The computer and device are on the same subnet.

• Security software has been exited.

2. Click [Update Device List].

If any devices are not displayed by performing the above

procedure, perform the following procedure.

1. Click [Search by IP Address].

2. Enter the IP address of the device to be installed.

Proceed to “Checking the IP Address” on p. A-3.

3. Click [OK].

If no devices are displayed by performing the above

procedure, click [Display Guide] for information on how to

solve the problem.

The installation starts.

Select.

Next, installation of the MF Toolbox starts.

* In Windows 2000 Server/Server 2003/Server 2008, the

MF Toolbox is not installed. Proceed to Step .

Select the check box.

Click.

Checking the Installation Results

P. 26

Click.

Ensure that [ ] is added.

Click.

The CD-ROM may be removed

once this screen appears.

Click.

If the following dialog box

appears

Click.

Installing with USB Connection (For Windows)

1. Turn on the computer, and then log on as a user with

administrative privileges.

2. Install the MF Drivers and MF Toolbox.

If you have already logged on, exit all applications which are running.

•Connect the USB cable after installing the software.

•Ensure that the power of the machine is turned on when connecting the USB cable.

Insert the CD-ROM.

Click.

If the top screen does not appear

• Windows 2000, XP, and Server 2003

1. From the [Start] or [start] menu, select [Run].

2. Enter "D:\Minst.exe", and then click [OK].

• Windows Vista, 7, and Server 2008

1. Enter "D:\Minst.exe" in [Start Search] or [Search programs

and files] under the [Start] menu.

2. Press the [ENTER] key on the keyboard.

* The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM

drive name may differ depending on the computer you are using.

Click.

Read the contents of the License

Agreement.

Click.

Click. [Easy Installation] performs the installation of the

following software.

• Printer driver

• Fax driver

• Scanner driver

• MF Toolbox

To add the following software and manual to the

installation, select [Custom Installation].

• Presto! PageManager

• e-Manual

e-Manual “Installing the MF Drivers and MF Toolbox”

To use the UFRII LT (XPS) printer driver through the USB connection

You need to change the machine setting beforehand. Follow the procedure below.

Press [ ] (Menu) → <System Settings> → <Select PDL (Plug-n-Play)> → <USB> → Select <UFRII LT (XPS)>

* The UFRII LT (XPS) printer driver can be used on operating systems that support XML Paper Specification (XPS).

“User Software CD-ROM” on p. 4.

* In Windows Server 2003/Server 2008, the

[Select the Type of Connection] screen is not

displayed. Proceed to Step .

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

Checking the Installation Results P. 26

3. Connect the USB cable.

When a dialog box is displayed

Follow the on-screen instructions and complete the installation.

Click.

Next, installation of the

MF Toolbox starts.

* In Windows 2000 Server/

Server 2003/Server 2008, the

MF Toolbox is not installed.

Proceed to Step .

Select the check box.

Click.

Ensure that [ ] is added.

Click.

The CD-ROM may be removed

once this screen appears.

Remove the cap.

Remove it by pulling the string.

Connect the cable.

• Flat end (A):

Connect to the USB port

on the computer.

• Square end (B):

Connect to the USB port

on the machine. (A)

(B)

If the following dialog box

appears

Click.

Ensure that the MF Drivers and MF Toolbox are installed correctly.

Ensure that the icons for the installed software are added as follows.

Refer to “User Software CD-ROM” (p. 4) for the functions of each software component.

Software Location Icon

Printer driver

Printer folder

•Windows 2000

From the [Start] menu, select [Settings] → [Printers].

•Windows XP Professional/Server 2003

From the [Start] or [start] menu, select [Printers and Faxes].

•Windows XP Home Edition

From the [start] menu, select [Control Panel], click [Printers and Other

Hardware] → [Printers and Faxes].

•Windows Vista

From the [Start] menu, select [Control Panel], and then click [Printers].

•Windows 7

From the [Start] menu, select [Devices and Printers].

•Windows Server 2008

From the [Start] menu, select [Control Panel], and then double-click [Printers].

Fax driver

Scanner driver

[Scanners and Cameras] or [Scanners and Cameras Properties] folder

•Windows 2000

From the [Start] menu, select [Settings] → [Control Panel] → double-click

[Scanners and Cameras].

•Windows XP

From the [start] menu, select [Control Panel], and then click [Printers and

Other Hardware] → [Scanners and Cameras].

•Windows Vista

From the [Start] menu, select [Control Panel], and then click [Hardware and

Sound] → [Scanners and Cameras].

•Windows 7

1. Enter “scanner” in [Search programs and files] under the [Start] menu.

2. Click [View scanners and cameras].

• For network connection

• For USB connection

MF Toolbox

Desktop

Network Scan Utility Taskbar

How to Use the Online Help

In the Online Help, all the functions of the driver software and information about options are included. If you want to

view descriptions of the functions and settings immediately when using the driver software, make use of the Online

Help.

How to display

the Help screen

(1) Select [File] → [Print] from the menu bar in the

application.

(2) Select the printer in [Select Printer] or [Name] in the

[Print] dialog box.

(3) Click [Preferences] or [Properties].

(4) Click [Help].

Checking the Installation Results (For Windows)

Installing the Software (For Macintosh)

• Connect the USB cable after installing the software.

• The installation screen varies depending on the version of MAC OS X.

Close all applications

that are running.

Double-click the CD-ROM icon.

Insert the CD-ROM.

Double-click.

Depending on the system environment, the

[Select a Destination] dialog box may not be

displayed. In this case, skip to Step .

Depending on the system environment, the

[Authenticate] dialog box may not be displayed.

In this case, skip to Step .

Read the contents of the License Agreement.

Click.

* You cannot change

the installation

location. Click

[Continue].

Click.

* [Change Install

Location] button

may appear, but you

cannot change the

installation location.

Enter.

Click.

* If you are using

Mac OS X 10.7.x,

click [Install

Software].

Click.

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

Remove the cap.

Remove it by pulling the string.

Connect the cable.

• Flat end (A): Connect to the USB port on the computer.

• Square end (B): Connect to the USB port on the machine.

Registering the Printer and Fax P. 29

Perform the following procedure only when connecting this machine to Macintosh with a USB cable.

(A)

(B)

Connecting a USB Cable (For Macintosh)

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

Registering the Printer and Fax (For Macintosh)

• When Using a TCP/IP Network

TCP/IP Connection P. 30

To print or send faxes from a Macintosh, you need to register this machine in the Macintosh.

The registration method varies depending on the connection type. Select a method according to your environment.

* To use the scanning function via a network connection, you need to register the scanner to the MF Toolbox. For details, see the Mac Scanner Driver Guide.

• When Connecting with a USB Cable

• When Using Auto IP (Bonjour)

USB Connection P. 31

Bonjour Connection P. 29

Open [System Preferences]. Click [Print & Fax]

or [Print & Scan].

Click the [+] icon.

If you are using Mac OS X 10.4.x, click [Print] in the [Print & Fax]

dialog box to display the [Print] panel, and then click the [+]

icon.

Select.

If you are using Mac OS X 10.4.x, select [Default Browser].

Check that this machine is added to the

[Print & Fax] or [Print & Scan] dialog box.

Click.

Checking the Installation Results P. 31

If the following screen appears, specify the optional

settings, and then click [Continue] or [OK].

Select.

Select a printer name for which

[Bonjour] is displayed in the [Kind]

or [Connection] column.

If you are using Mac

OS X 10.6.x or Mac OS

X 10.7.x, select the

corresponding driver

from the separate

dialog box, and then

click [OK].

If you are using Mac OS X 10.4.x,

select [Canon] from [Print Using].

Select.

Click.

Bonjour Connection (For Macintosh)

Open [System Preferences]. Click [Print & Fax]

or [Print & Scan].

Click the [+] icon.

If you are using Mac OS X 10.4.x, click [Print] in the [Print & Fax]

dialog box to display the [Print] panel, and then click the [+]

icon.

Enter the IP address of this machine.

Select.

If you are using Mac OS X 10.4.x,

select [Canon] from [Print Using].

Checking the Installation Results P. 31

* The fax driver cannot be used in an IPv6 environment.

If the following screen appears, specify the optional

settings, and then click [Continue] or [OK].

Check that this

machine is added

to the [Print & Fax]

or [Print & Scan]

dialog box.

Select.

If you are using Mac OS X 10.4.x, select [IP Printer].

* [IPP (Internet Printing Protocol)] is not supported.

Click.

If you are using Mac OS X

10.6.x or Mac OS X 10.7.x,

select the corresponding

driver from the separate

dialog box, and then click

[OK].

Select a driver that supports

this machine.

Click.

TCP/IP Connection (For Macintosh)

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

USB Connection (For Macintosh)

The computer is connected with the scanner.

With this section, check that the scanner driver is installed correctly.

• You do not need to check the installation results of the printer driver and fax driver. You can use the drivers when the registration of this machine is

complete.

Open the Image Capture application of your Mac OS X.

When [Canon MF8000C Series] appears in the following locations, the installation of the driver was successful.

Open [System Preferences]. Click [Print & Fax]

or [Print & Scan].

Click the [+] icon.

If you are using Mac OS X 10.4.x, click [Print] in the [Print & Fax]

dialog box to display the [Print] panel, and then click the [+]

icon.

Select.

Check that this machine is

added to the [Print & Fax] or

[Print & Scan] dialog box.

Click.

Checking the Installation Results P. 31

If the following screen appears, specify the optional

settings, and then click [Continue] or [OK].

• Mac OS X 10.4.x/10.5.x

The pull-down menu displayed by clicking [Devices] in the menu bar.

• Mac OS X 10.6.x/10.7.x

The left list in the window

Select.

Select a printer name for which [USB] is

displayed in the [Kind] or [Connection] column.

If you are using Mac OS X 10.4.x, select [Default Browser].

If you are using Mac

OS X 10.6.x or Mac

OS X 10.7.x, select

the corresponding

driver from the

separate dialog box,

and then click [OK].

Select.

If you are using Mac OS X 10.4.x,

select [Canon] from [Print Using].

Click.

Checking the Installation Results (For Macintosh)

A-1

Using the e-Manual

Page configuration of the e-Manual

When you start the e-Manual, the screen below is displayed.

Click a button for the

function which you want to

use or desired information.

Click when performing troubleshooting or maintenance of the machine.

Click to refer to the contents, glossary, and

how to use the e-Manual.

Enter a keyword which you want to

search, and then click the right button.

Click to view precautions

when using Macintosh.

Insert the User Software CD-ROM in your computer.

Click [Custom Installation].

If CD-ROM Setup does not appear, see “If the top

screen does not appear.”

Select only the [Manuals] check box.

Click [Install].

Installing the e-Manual on your computer

When the installation finished, click [Exit].

To display the e-Manual, double-click the short cut icon [MF8000C Series e-Manual] on the desktop.

* ActiveX may block pop-ups in the background. If the

e-Manual is not displayed properly, look for an information

bar at the top of the page and click the information bar.

Insert the User Software CD-ROM in your computer.

Click [Display Manuals].

Click [ ] for [e-Manual].

Displaying the e-Manual directly from the CD-ROM

* Depending on the operating system you are using, a security protection message is displayed.

Allow the contents to be displayed.

If the top screen does not appear

• Windows 2000, XP, and Server 2003

1. From the [Start] or [start] menu, select [Run].

2. Enter "D:\Minst.exe", and then click [OK].

• Windows Vista, 7, and Server 2008

1. Enter "D:\Minst.exe" in [Start Search] or [Search programs and files]

under the [Start] menu.

2. Press the [ENTER] key on the keyboard.

* The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive

name may differ depending on the computer you are using.

Click [Next].

Click [Yes].

Click [Next].

For Windows

A-1

A-2

Insert the User Software CD-ROM in your computer.

Drag and drop the [MF Guide] folder into a location where you want to save it.

Installing the e-Manual on your computer

Insert the User Software CD-ROM in your computer.

Open the [Documents] → [MF Guide] folders.

Double-click [index.html].

Displaying the e-Manual directly from the CD-ROM

When displaying the installed e-Manual, double-click [index.html] in the saved [MF Guide] folder.

For Macintosh

For more details on the fax, print, and scan functions

See the following Driver Guides or Help.

You can find the driver guides in the following locations on the User Software CD-ROM.

• Mac Fax Driver Installation Guide:

User Software CD-ROM → [Documents] → [FAX] → [Guide] → [index.html]

• Mac UFR II Printer Driver Installation Guide:

User Software CD-ROM → [Documents] → [Print] → [Guide] → [index.html]

• Mac Scanner Driver Guide:

User Software CD-ROM → [Documents] → [Scan] → [Guide] → [index.html]

Open the [Documents] folder.

A-2

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

A-3

Checking the IP Address

Check the network operation.

Press [ ] or [ ] to select,

and then press [OK].

Press [ ]

(Status Monitor/Cancel).

Press [ ] or [ ] to select,

and then press [OK].

Press [ ] or [ ] to select,

and then press [OK].

Check the IP address. Press [ ] (Status Monitor/

Cancel) to close the screen.

Enter “http://<IP address of the machine>/” in the address field, and then

press the [ENTER] key on your keyboard.

Start the web browser of a

computer which is connected

to a network.

Check that the screen of the Remote UI is displayed.

When the Remote UI is not displayed

Check the following.

• Whether the computer and hub are connected using a LAN cable

• Whether <Remote UI On/Off> is set to <On>

e-Manual “Configuring the Remote UI”

IP Address

192.168.0.225

The <IP address of the machine> is the

address checked in Step .

Input Example: http://192.168.0.215/

When the machine is connected to a switching hub

You may not be able to connect the machine to a network even

though your network settings are appropriate. Delaying the

machine's network startup time may solve the problem.

e-Manual “Specifying a Delay Before Establishing the Network

Connection”

Status Monitor/Cancel

TX Job

RX Job

Fax Forwarding Erro

...

Network Information

IPv4

IPv6

Wireless LAN Informa

...

IEEE802.1X Error Inf

...

IPv4

IP Address

Subnet Mask

Gateway Address

Host Name

If the IP address displayed on the screen is

between “169.254.1.0 and 169.254.254.255”

This IP address is the one assigned by the AutoIP function.

If an IP address other than link-local addresses is set for the

computer, set an IP address in the same subnet as the computer

(other than link-local addresses) also for this machine manually.

This enables the installer to search for this machine.

e-Manual “Setting the IPv4 Address”

A-3

A-4

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

If You Want to Uninstall the Installed Software

1. Confirm the following points.

2. Delete the software.

For the printer/fax/scanner driver

For the MF Toolbox

• You must have administrative privileges on the computer

• You should have the installation software (in case you want to re-install the drivers)

• You have closed all applications on your computer

If you do not need the printer driver, fax driver, scanner driver, or MF Toolbox, you can uninstall them with the following

procedure.

* If your machine is connected to a computer via the WSD network, you may not uninstall the drivers or software following the

procedures below. Refer to “Uninstalling the Software” in the e-Manual to uninstall the MF Drivers.

Click. Click.

From the [Start] menu, click

[(All) Programs] → [Canon] →

[MF Toolbox 4.9] →

[Toolbox Uninstall].

From the [Start] menu, click [(All) Programs] → [Canon] →

[MF8000C Series] → [Uninstall Drivers].

Click.

For Windows

A-5

For Macintosh

If the machine is connected to a computer with a USB cable, disconnect the USB cable.

Open [System Preferences], and then click

[Print & Fax] or [Print & Scan].

Select the machine, and then click the [-] icon.

If you are using OS X 10.4.x, click [Print] to display the [Print]

panel, and then click the [—] icon.

Delete all print queues

set from this driver.

Start the Mac OS X Finder.

Close all windows open.

From the menu bar, click [Go] → [Go to Folder].

Restart the computer.

Delete the files or folders below from the driver you want to uninstall.

Drag a file or folder to [Trash] icon on the Dock to delete.

If you want to delete the Scanner Driver or MF Toolbox, proceed to Step .

If [Authenticate] dialog box appears, enter the administrator’s name and password, and then click [OK].

Software Location of the folder to enter Name of the file or folder to delete

Printer Driver

/Library/Printers/Canon/ CUPSCMFP

/Library/LaunchAgents/ jp.co.canon.CUPSCMFP.BG.plist

• When using Mac OS X 10.4.x:

/Library/Printers/PPDs/Contents/Resources/en.lproj/ CNMCXXXZUS.ppd.gz

(XXX may differ depending on the model.)

• When using Mac OS X 10.5 or later:

/Library/Printers/PPDs/Contents/Resources/

Fax Driver

/Library/Printers/Canon/ CUPSFAX

/Library/LaunchAgents/ jp.co.canon.CUPSFAX.BG.plist

• When using Mac OS X 10.4.x:

/Library/Printers/PPDs/Contents/Resources/en.lproj/ CNMCXXXFUS.ppd.gz

(XXX may differ depending on the model.)

• When using Mac OS X 10.5 or later:

/Library/Printers/PPDs/Contents/Resources/

Scanner Driver /

MF Toolbox

/Applications/Canon MF Utilities/ MF Toolbox

/Library/Application Support/Canon/ ScanGear MF

/Library/Application Support/Canon/ WMCLibrary.framework

/Library/Application Support/Canon/ WMCReg.plist

/Library/Image Capture/Devices/* Canon MFScanner.app*

/Library/Image Capture/TWAIN Data Sources/

Canon XXX.ds

Canon XXX USB.ds

(XXX may differ depending on the model.)

* Mac OS X 10.6 or later.

A-5

Contacting the Service Center

When you have a problem with your machine and you cannot solve it even if you refer to the manuals or online help,

please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at 1-800-OK-CANON

between the hours of 8:00 A.M. to 8:00 P.M. EST for U.S.A. and 9:00 A.M. to 8:00 P.M. EST for Canada Monday through

Friday. Canadian customer support is available on-line at www.canon.ca or by calling 1-800-OK-CANON Monday

through Friday from 9:00 A.M. to 8:00 P.M. EST

Trademarks

Canon, the Canon logo, and Color imageCLASS are registered trademarks of Canon Inc. in the United States and may

also be trademarks or registered trademarks in other countries.

Apple, Mac OS, and Macintosh are trademarks or registered trademarks of Apple Inc. in the U.S. and/or other countries.

Microsoft, Windows and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the

United States and/or other countries.

All other product and brand names are registered trademarks, trademarks or service marks of their respective owners.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into

any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical,

manual, or otherwise, without the prior written permission of Canon Inc.

Disclaimers

The information in this document is subject to change without notice.

CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED,

EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY,

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT

BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES

RESULTING FROM THE USE OF THIS MATERIAL.

Preface

Installing the Machine

Configuring and Connecting the Fax

Connecting to a Computer and

Installing the Drivers

Appendix

A-6

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

CANON MARKETING JAPAN INC.

16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan

CANON U.S.A., INC.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

CANON EUROPA N.V.

Bovenkerkerweg, 59-61, 1185 XB Amstelveen, The Netherlands

CANON CHINA CO. LTD.

15F Jinbao Building No.89, Jinbao Street, Dongcheng District, Beijing 100005, PRC

CANON SINGAPORE PTE LTD

1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632

CANON AUSTRALIA PTY LTD

1 Thomas Holt Drive, North Ryde, Sydney NSW 2113, Australia

CANON GLOBAL WORLDWIDE SITES

http://www.canon.com/

Canon Color Imageclass Mf8080Cw Quick Start Guide Starter

Navigation menu

Versions of this User Manual:

Views

Navigation