Canon Imageclass Mf4450 Laser Multifunction Printer 4509B021Aa Users Manual Basic Operation Guide

4509B021AA to the manual ec511a2b-1b19-4376-a6e9-ebc7e69e082f

2015-01-23

: Canon Canon-Imageclass-Mf4450-Laser-Multifunction-Printer-4509B021Aa-Users-Manual-239908 canon-imageclass-mf4450-laser-multifunction-printer-4509b021aa-users-manual-239908 canon pdf

Open the PDF directly: View PDF .
Page Count: 164

Download
Open PDF In Browser	View PDF

Basic Operation Guide

Network Setting Procedure
Security Functions
Searching in Detail
See the e-Manual.
User Software CD-ROM

Searching the Installation and
Connection Procedure
See the Starter Guide.

Be sure to read the manual before using
the machine.
Keep the manual for future reference.

1
2
3
4
5
6
7
8
9
10
11

Quick View- Perform Useful Tasks

Before Using the Machine

P.1-1

Document and Paper Handling

P.2-1

Copying

P.3-1

Printing from a Computer

P.4-1

Registering Destinations
in the Address Book

P.5-1

Using the Fax Functions

P.6-1

Using the Scan Functions

P.7-1

Maintenance

P.8-1

Troubleshooting

P.9-1

Registering/
Setting the Various Functions

P.10-1

Appendix

P.11-1

Quick View- Perform Useful Tasks
Copy

Fax

Scan

Network Settings & Remote UI

There are a variety of copy functions that are explained in later pages of this manual as well as in the e-Manual. You
can enlarge or reduce copies as well as copy multiple documents onto one sheet. Additionally, you can adjust the
density and image quality before copying.
Below is a quick overview of highlighted copy features that you can utilize in your everyday use.

Adjusting the Image Quality According to the Document

For details, see "Copying" from p. 3-1.

Image Quality Adjustment

Density Adjustment

You can adjust the image quality according to the types of
documents.
A correct selection is necessary for the optimal
reproduction of the document.

You can adjust the density of copies according to the
document.

Sharpness Adjustment
You can emphasize the outline of the image in the
document or decrease the contrast.

Set ＜−＞

Set ＜＋＞

Various Copy Functions

For details, see "Copying" from p. 3-1.

Enlarged/Reduced Copies

Reduced Layout

You can enlarge or reduce standard size documents to copy
on standard size paper or specify the copy ratio in
percentage.

You can reduce multiple documents to copy them onto one
sheet.

2 on 1

2-Sided Copying (MF4570dn Only)
You can copy 1-sided documents on both sides of paper.

4 on 1

Collating
You can sort copies into sets arranged in page order.
Copying ID Card
1

2
1

3
2

2
3
1

1
2

2
3

You can make a copy of a 2-sided card onto one side of
paper.

Quick View- Perform Useful Tasks
Copy

Fax

Scan

Network Settings & Remote UI

There are a variety of print functions that are explained in later pages of this manual as well as in the e-Manual.
Enlarge or reduce documents and print multiple-page data onto one sheet. If you are using the MF4570dn, you can
also perform 2-sided printing.
Below is a quick overview of highlighted print features that you can utilize in your everyday use.

Various Printing Functions

For details, see "Printing from a Computer" from p. 4-1.

Enlarged/Reduced Printing

Reduced Layout

You can enlarge or reduce standard size documents to copy
on standard size paper or specify the copy ratio in
percentage.

You can reduce multiple documents to print them onto one
sheet.

2-Sided Printing (MF4570dn Only)
You can print on both sides of paper.

Miscellaneous Printing Functions

For details, see "Print" in the

e-Manual.

Booklet Printing (MF4570dn Only)

Watermark Printing

Booklet printing allows you to make a booklet by folding
printouts in half.

You can superimpose watermarks (such as [COPY] and
[DRAFT]) over the documents created by an application.

Displaying a Preview before Printing
You can check the printout result on a computer display.
Poster Printing
You can magnify and divide a single page image to print it out
on multiple sheets of paper. You can make one large poster
by joining these printouts together.

Selecting a "Profile"
Some printer driver settings are provided as "Profiles"
beforehand.
You can perform printing which suits your needs only by
selecting a "Profile."

Quick View- Perform Useful Tasks
Copy

Fax

Scan

Network Settings & Remote UI

There are a variety of fax functions that are explained in later pages of this manual as well as in the e-Manual. The
machine is equipped with a Super G3 fax, with high transmission speeds as well as the PC function which can send
a document from a computer directly, which reduces paper costs.
Below is a quick overview of highlighted fax features that you can utilize in your everyday use.

Sending a Document Directly from a Computer (PC Fax)
You can send a document or image created in an application
as a fax directly using the fax driver from a computer on a
network. Because you do not need to print the document, you
can reduce the paper cost as well as send a clear document
which has little dirt or blur.

For details, see "Fax" in the

e-Manual.

You can import the address book using the fax driver,
enabling you to send a fax to a destination easily without
mistakes.
You can also create a cover sheet for when sending a fax.

* You need to install the fax driver in a computer.
* If you are a Macintosh user, see the following.
࡮To install the Fax Driver
ĺStarter Guide or Fax Driver Guide
࡮To view how to use each function
ĺFax Driver's Help
To view how to display the Fax Driver Guide or Fax Driver's Help,
VHH)RU0DFLQWRVK8VHUVĺ3

Data is created
in a computer

Send
Fax driver screen

Forwarding the Received Fax (Manual Forwarding)
You can forward received faxes stored in the
memory to a specified destination.

Received Fax

Registering Destinations in the Address Book
By registering destinations for sending faxes
beforehand, you can save many steps to enter
the destinations when sending the documents.

For details, see "Using the Fax Functions" from p. 6-1.

Forward

For details, see "Registering Destinations in the Address Book" from p. 5-1.

One-touch keys
Coded dialing
Group dialing

Quick View- Perform Useful Tasks
Copy

Fax

Various Sending/Receiving Functions

Scan

Network Settings & Remote UI

For details, see "Using the Fax Functions" from p. 6-1.

Various Sending Functions

Various Methods for Specifying a Destination
You can register fax destinations in the address book. You can
specify the destinations using various methods, enabling you to
send documents quickly and easily.

Destination Group
You can combine multiple destinations and register them as a
group.
Up to 50 destinations can be combined.

Destination search
AAAAA
BBBBB
CCCCC

One-touch keys
By registering destinations in one-touch keys, you can specify
a destination in one step.
/" in the address field, and
then press the [ENTER] key on your
keyboard.

e-Manual.

H0DQXDOĺ6WDUWLQJWKH5HPRWH8,

3 Log on to the Remote UI.
(1) Select [System Manager Mode] or [End-User Mode].
(2) For [System Manager Mode], enter [System
Manager PIN].
For [End-User Mode], enter [User Name].
(3) Click [OK].

(1)
(1)

(2)
(3)

Contents
Contents
Manuals for the Machine

Available Features

How to Use This Manual

Important Safety Instructions

vii

Installation Requirements and Handling

Legal Notices

xiii

Laser Safety

xvii

1. Before Using the Machine
Names and Functions on Each Part of the Machine

1-1
1-2

Front Side

1-2

Back Side

1-3

Interior

1-3

Multi-purpose Tray

1-4

Placing Documents

2-4

Placing Documents on the Platen Glass

2-4

Loading Document in the Feeder

2-4

Paper Requirements

2-6

Paper Size

2-6

Paper Type

2-7

Printable Range

2-8

Loading Paper

2-9

In the Paper Cassette

2-9

In the Multi-Purpose Tray

2-11

Precautions when Loading Paper

2-12

Paper Loading Capacity

2-12

Paper Loading Orientation

2-13

When printing paper with a letterhead or logo
(previously printed paper)

2-13

Printing on Envelopes

2-13

Setting a Paper Size and Type

2-14

Setting a Custom Paper Size

2-14

Selecting Print Side (MF4570dn Only)

2-16

Paper Cassette

1-4

Operation Panel

1-5

When setting this item to

LCD (Standby Mode)

1-6

(the default setting)

2-16

Copy Mode

1-6

When setting this item to

2-16

Fax Mode

1-6

Scan Mode

1-6

Navigating the Menu

1-7

3. Copying

3-1

Entering the Menu Screen

1-7

Scrolling Through Menu Items

1-7

Selecting a Menu Item

1-7

Specifying values using the navigation keys

1-8

Canceling using the Stop Key

3-3

Returning to the Default Screen

1-8

Checking and Canceling using the Status Monitor/Cancel Key

3-3

Text Input Method
Entering Text Except for IP Address

1-9

Basic Copying Method
Checking and Canceling Copy Jobs

Copy Settings

3-2
3-3

3-4

1-9

Adjusting the Density

3-4

Changing the Entry Mode

1-9

Selecting Image Quality (Copy)

3-4

Entering Text, Symbols, and Numbers

1-9

2-Sided Copying (MF4570dn Only)

3-5

Moving the Cursor (Entering a Space)

1-9

Enlarging/Reducing Copies

3-6

Deleting text, symbols, or numbers

1-9

Multiple Documents onto One Sheet (N on 1)

3-6

Collating Copies

3-7

Emphasize the Outline of an Image (Sharpness)

3-7

Entering IP Address (MF4570dn Only)

1-10

Setting the Sleep Timer

1-11

Setting the Current Date and Time

1-12

2. Document and Paper
Handling

2-1

Document Requirements

2-2

Scanning Range

2-2

Copy

2-2

FAX

2-3

Scan

2-3

Copying an ID Card

3-8

Changing the Default Values

3-9

4. Printing from a Computer

4-1

Installing the Printer Driver

4-2

Printing from a Computer

4-3

Scaling Documents

4-3

Printing Multiple Pages on One Sheet

4-3

2-sided Printing (MF4570dn Only)

4-4

Checking and Canceling Print Jobs

4-5

5. Registering Destinations in the
Address Book
5-1

Changing the Default Values for Fax
Changing the Fax Settings (Items Specified Using the
[Menu] Button)

Address Book

6-18

6-19

5-2

Setting Procedure for Sending Faxes

6-19

One-touch Keys

5-2

Setting Items

6-19

Coded Dialing

5-2

6-20

Select Line Type

6-20

Public Line Connection

6-20

Group Dialing

Registering and Editing One-Touch Keys

5-3

Registering and Editing via the Operation Panel

5-3

Off-Hook Alarm

6-20

Sender ID

6-20

5-5

Change Defaults

6-20

5-6

ECM TX

6-20

Registering and Editing One-Touch Keys via the Remote UI
(MF4570dn Only)

Registering and Editing Coded Dial Codes
Registering and Editing via the Operation Panel

5-6

Registering and Editing a coded Dial Code via the Remote UI
5-8

Registering and Editing Recipients for Group Dialing

5-9

Registering and Editing a Destination Group via
the Operation Panel

5-9

Registering and Editing a Destination Group via the Remote UI
(MF4570dn Only)

6. Using the Fax Functions

Pause Time

6-21

Auto Redial

6-21

Check Dial Tone Before Sending

(MF4570dn Only)

6-20

5-12

6-1

6-21

Setting Procedure for Receiving Faxes

6-21

Setting Items for the Receive Settings

6-22

2-Sided Printing (MF4570dn Only)

6-22

Reduce RX Size

6-22

RX Page Footer

6-22

Continue Print. When Toner Is Nearly Out

6-22

ECM RX

6-22

Incoming Ring

6-23

Remote RX

6-23

Auto RX Switch

6-23

System Settings Procedure

6-23

Setting Items

6-24

Basic Method for Sending Faxes

6-2

Fax Settings

6-3

TX Start Speed

6-24

Image Quality Settings

6-3

RX Start Speed

6-24

Density Settings

6-3

Memory Lock Settings

6-24

6-3

Select Country/Region

6-24

Sharpness Settings

Specifying Destinations

6-4

Address Book PIN

6-25

Restrict New Destinations

6-25

Specifying Destinations by Entering a Fax Number

6-4

Allow Driver Faxing

6-25

Specifying Destinations with the One-Touch Keys

6-4

Restrict Sending From History

6-25

Specifying Destinations Using Coded Dialing

6-4

Fax No. Confirmation Re-Entry

6-25

Specifying Destinations Using Group Dialing

6-5

Restrict Sequential Broadcast

6-25

Specifying Destinations Using the Address Book

6-5

Redialing (Manual Redialing)

6-6

Useful Fax Sending Methods

6-7

Sending a Fax after Making a Phone Call (Manual Sending)

6-7

Push-button Telephone Service Using a Dial-line

6-7

Sending a Fax Abroad (Adding Pauses)

6-8

Sending to Multiple Destinations at a Time
(Sequential Broadcast)

6-9

Receiving Faxes

6-10

Receive Mode

6-10

Changing the Receive Mode
Detailed Settings for the Fax/Tel Auto Switch Mode

Canceling Fax Jobs

7. Using the Scan Functions
Basic Operation Methods for Scanning

8. Maintenance

6-26

7-1
7-2

8-1

Cleaning the Machine

8-2

6-12

Cleaning the Exterior

8-2

6-13

Cleaning the Interior

8-2

Cleaning the Fixing Unit

8-3

Cleaning the Platen Glass

8-4

Cleaning the Feeder

8-4

Forwarding Received Fax Documents in Memory to
Other Destinations (Manual Forwarding)

6-14

Checking and Managing Fax Documents in Memory

6-15

Precautions When Cleaning the Machine

8-4

6-15

Replacing Toner Cartridges

8-6

Printing Received Fax Documents

6-15

When a Message Appears

8-6

Checking and Deleting Received Fax Documents

6-16

When White Streaks Appear On the Printouts or

Checking the History of Received/Sent Fax Documents

6-17

Some Parts Are Faded

Checking and Canceling Fax Jobs

8-6

iii

About the Supplied Toner Cartridge

8-7

About Replacement Toner Cartridge

8-7

Handling Toner Cartridge

8-7

Checking the Toner Level

8-8

Using the Toner Saver Mode

8-8

Before Replacing the Toner Cartridge

8-9

Replacing the Toner Cartridge
Precautions when Replacing Toner Cartridge

Purchase Consumables

Recycling Used Cartridges

8-10

8-13
8-13

Packaging

8-13

Shipping

8-14

Precautions when Transporting the Machine

10-2

Printing a User Data List

10-2

Contents of the Setting Menu

10-2

11. Appendix

11-1

8-13

U.S.A. PROGRAM

Transporting the Machine

Setting Menu List

8-11

8-12

The Clean Earth Campaign

CANADA PROGRAM-CANADA PROGRAMME

10. Registering/Setting the Various
Functions
10-1

8-15

8-16
8-17

Main Specifications
Machine Specifications

Clearing Jams

9-1
9-2

Document Jams in the Feeder

9-3

Paper Jams Inside the Machine

9-3

Display Message

9-6

Error Codes

9-6

If Appears

9-8

Troubleshooting

9-9

Check the Following First

9-9

Is the power switched ON?

9-9

Has the power switch been just turned ON?

9-9

Is the machine in Sleep mode?

9-9

Are the settings proper?

9-9

Is the Error indicator on or blinking?

9-9

Does a message appear on the display?

9-10

Is the telephone line connected or configured properly?

9-10

If You Cannot Solve a Problem

9-10

If a Power Failure Occurs

9-11

If You Cannot Solve a Problem

9-12

Customer Support (U.S.A.)

9-12

Customer Support (Canada)

9-12

Print Result Is Not Good

9-13

Paper Curls

9-13

Paper Creases

9-14

Printing Is Uneven

9-14

White Specks Appear

9-15

The Toner Does Not Fix onto the Paper Well

9-16

The Printed Paper Has Vertical Streaks

9-16

Smudge Marks of Spattering Toner Appear around the Text
or Patterns

9-17

The Overall Print Result Is Dark

9-17

Copied Lines and Text Appear Faded

9-18

Printed Bar Codes Cannot Be Scanned

9-18

Paper Jams Occur Frequently When Performing
2-Sided Printing (MF4570dn Only)

9-18

11-2

Copy Specifications

11-2

Printer Specification

11-2

Scanner Specifications

11-3

Fax Specifications

11-3

Telephone Specifications

11-3

For Macintosh Users

9. Troubleshooting

11-2

11-4

Displaying Driver Guides (PDF Files)

11-4

Displaying a Driver’s Help System

11-4

Content of the e-Manual about Features that Are Unavailable
on the Macintosh

Index

11-4

11-5

Manuals for the Machine
Starter Guide
Read this manual first.
•
•
•
•
•

This manual describes the settings for
setting up the machine and installing
the software. Be sure to read this
manual before using the machine.

Preface
Installing the Machine
Configuring and Connecting the Fax
Connecting to a Computer and Installing the Drivers
Appendix

Basic Operation Guide
Read this manual next.

•
•
•
•
•
•
•

This manual describes the basic use of
the machine.

e-Manual
Read the desired chapter
to suit your needs.

Before Using the Machine
Document and Paper Handling
Copying
Printing from a Computer
Registering Destinations
in the Address Book
Using the Fax Functions

*1
*2

•
•
•
•
•
•

Using the Scan Functions
Maintenance
Troubleshooting
Registering/Setting
Functions
Appendix

* The e-Manual is included in the User Software CD-ROM.
•
•
•
•
•
•
•

The e-Manual is categorized by subject
to find desired information easily.

This manual

Basic Operation
Copy
Fax *2
Print *2
Scan *2
Network Settings *1
Security

• Setting and Managing
from Computer *1
• Troubleshooting
• Maintenance
• Setting Menu List
• Specifications

The network function is available only for MF4570dn.
If you are using Macintosh, see the following Driver Guides or Help for more details on
these functions.
You can find the driver guides in the following locations on the User Software CD-ROM.
• Fax: User Software CD-ROM → [Manuals] → [GUIDE-FAX-US.pdf ]
• Print: User Software CD-ROM → [Manuals] → [GUIDE-UFR II-US.pdf ]
• Scan: User Software CD-ROM → [Manuals] → [GUIDE-SCAN-US.pdf ]

Available Features
The following features are available for each model.
○ : available
— : not available

Copy

2-sided Printing

Fax (PC Fax)

Scan
(USB)

Scan
(Network)*

Remote UI ADF (1-sided)

ADF (2-sided)

MF4570dn

○

—

MF4450

○

—

○

—

○

—

* You may use network scan function only in the Windows environment.

How to Use This Manual
Symbols Used in This Manual
WARNING

Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To
use the machine safely, always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the
machine safely, always pay attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine
correctly, and avoid damage to the machine or property.
Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is
highly recommended.

NOTE

Indicates an operation that must not be performed. Read these items carefully, and make sure not to perform the
described operations.

Keys and Buttons Used in This Manual
The following symbols and key names are a few examples of how keys to be pressed are expressed in this manual.
• Operation panel keys: [Key icon] + (Key name)
Example: [

] (Stop)

• Display:
• Buttons and items on the computer display: [Preferences]

Illustrations Used in This Manual
Illustrations used in this manual
Illustrations of the model MF4570dn are used in this manual. When there is any difference
among the machines, it is clearly indicated in the text, e.g., “MF4450.”
For information on the standard features for each model, see the followings.
“Available Features” (→P.vi)

Displays used in this manual
The display used in this manual is the factory preset display for the MF4570dn. Depending on the system configuration and
product purchased, the appearance of the display may differ.

Important Safety Instructions
Please read these “Important Safety Instructions” thoroughly before operating the machine.
As these instructions are intended to prevent injury to the user and other persons or to prevent destruction of property, always pay
attention to these instructions and operational requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual.
• Do not install the machine in the following locations, as this
may result in a fire or electrical shock.

Installation

- A damp or dusty location

WARNING
• Do not install the machine in a location near alcohol, paint
thinner, or other flammable substances. If flammable
substances come into contact with electrical parts inside
the machine, this may result in a fire or electrical shock.
• Do not place the following items on the machine.

- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures

- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with
water or liquids
If these items come into contact with a high-voltage area
inside the machine, this may result in a fire or electrical
shock. If these items are dropped or spilled inside the
machine, immediately turn off the power switches of the
machine and computer (1) and disconnect the interface
cable if it is connected (2). Then, unplug the power plug
from the AC power outlet (3) and contact your local
authorized Canon dealer.
(1)
OFF

- A location exposed to smoke and steam, such as near a
cookery or humidifier

- A location near open flames
• When installing the machine, gently lower the machine to
the installation site so as not to catch your hands between
the machine and the floor or between the machine and
other equipment, as this may result in personal injury.
• When connecting the interface cable, connect it properly by
following the instructions in this manual. If not connected
properly, this may result in malfunction or electrical shock.
• When moving the machine, follow the instructions in this
manual to hold it correctly. Failure to do so may cause you
to drop the machine, resulting in personal injury.
“Transporting the Machine” (→P.8-16)

(3)

Power Supply

(2)
(1)

OFF

(3)

CAUTION
• Do not install the machine in unstable locations, such as on
unsteady platforms or inclined floors, or in locations subject
to excessive vibrations, as this may cause the machine to fall
or tip over, resulting in personal injury.
• The ventilation slots are provided for proper ventilation of
working parts inside the machine. Never place the machine
on a soft surface, such as a bed, sofa, or rug. Blocking the
slots can cause the machine to overheat, resulting in a fire.

WARNING
• Do not damage or modify the power cord. Also, do not
place heavy objects on the power cord or pull on or
excessively bend it. This can cause electrical damage,
resulting in fire or electrical shock.
• Keep the power cord away from all heat sources. Failure to
do so can cause the power cord insulation to melt, resulting
in a fire or electrical shock.
• The power cord should not be taut, as this may lead to a
loose connection and cause overheating, which could result
in a fire.
• The power cord may become damaged if it is stepped on,
fixed with staples, or if heavy objects are placed on it.
Continued use of a damaged power cord can lead to an
accident, such as a fire or electrical shock.
• Do not plug or unplug the power plug with wet hands, as
this can result in electrical shock.
• Do not plug the power cord into a multiplug power strip, as
this can result in a fire or electrical shock.
• Do not bundle up or tie up the power cord in a knot, as this
can result in a fire or electrical shock.
• Insert the power plug completely into the AC power outlet.
Failure to do so can result in a fire or electrical shock.
• If excessive stress is applied to the connection part of the
power cord, it may damage the power cord or the wires
inside the machine may disconnect. This could result in a
fire. Avoid the following situations:
- Connecting and disconnecting the power cord
frequently.
- Tripping over the power cord.

vii

- The power cord is bent near the connection part, and
continuous stress is being applied to the power outlet or
the connection part.
- Applying a shock to the power connector.
• Do not use power cords other than the one provided, as
this can result in a fire or electrical shock.
• As a general rule, do not use extension cords. Using an
extension cord may result in a fire or electrical shock.
• Remove the power plug from the AC power outlet
and refrain from using the machine during a thunder
storm. Lightening can result in a fire, electrical shock or
malfunction.

CAUTION
• Do not use a power supply voltage other than that listed
herein, as this may result in a fire or electrical shock.
• Always grasp the power plug when unplugging the power
plug. Do not pull on the power cord, as this may expose the
core wire of the power cord or damage the cord insulation,
causing electricity to leak, resulting in a fire or electrical
shock.
• Leave sufficient space around the power plug so that it can
be unplugged easily. If objects are placed around the power
plug, you may be unable to unplug it in an emergency.

Handling
WARNING
• Do not disassemble or modify the machine. There are
high-temperature and high-voltage components inside the
machine which may result in a fire or electrical shock.
• Electrical equipment can be hazardous if not used properly.
Do not allow children to touch the power cord, cables,
internal gears, or electrical parts.
• If the machine makes an unusual noise or emits smoke,
heat, or an unusual smell, immediately turn off the power
switches of the machine and computer and disconnect the
interface cable if it is connected. Then, unplug the power
plug from the AC power outlet and contact your local
authorized Canon dealer. Continued use can result in a fire
or electrical shock.
• Do not use flammable sprays near the machine. If
flammable substances come into contact with electrical
parts inside the machine, this may result in a fire or
electrical shock.
• Always turn off the power switches of the machine and
computer, and then unplug the power plug and interface
cables before moving the machine. Failure to do so can
damage the cables or cords, resulting in a fire or electrical
shock.
• Confirm that the power plug or power connector is inserted
completely after moving the machine. Failure to do so can
result in an overheating and fire.
• Do not drop paper clips, staples, or other metal objects
inside the machine. Also, do not spill water, liquids, or other
flammable substances (alcohol, benzene, paint thinner,
etc.) inside the machine. If these items come into contact
with a high-voltage area inside the machine, this may result
in a fire or electrical shock. If these items are dropped or
spilled inside the machine, immediately turn off the power
switches of the machine and computer and disconnect the
interface cable if it is connected. Then, unplug the power
plug from the AC power outlet and contact your local
authorized Canon dealer.
• When plugging or unplugging a USB cable when the power
plug is plugged into an AC power outlet, do not touch the
metal part of the connector, as this can result in electrical
shock.

viii

CAUTION
• Do not place heavy objects on the machine. The object or
the machine may fall, resulting in personal injury.
• Turn off the power switch when the machine will not be
used for a long period of time, such as overnight. Turn off
the machine and unplug the power plug if the machine
will not be used for an extended period of time, such as for
several days.
• Open or close covers and install or remove cassettes gently
and carefully. Be careful not to hurt your fingers.
• Keep your hands and clothing away from the roller in the
output area. Even if the machine is not printing, the roller
may suddenly rotate and catch your hands or clothing,
resulting in personal injury.
• The output slot is hot during and immediately after
printing. Do not touch the area surrounding the output slot,
as this may result in burns.
• Printed paper may be hot immediately after being output.
Be careful when removing the paper and aligning the
removed paper, especially after continuous printing. Failure
to do so may result in burns.
• When performing copy with a thick book placed on the
platen glass, do not press the feeder forcefully. This may
damage the platen glass and cause personal injury.
• Be careful not to drop a heavy object, such as a dictionary,
on the platen glass. This may damage the platen glass and
cause personal injury.
• Close the feeder gently so as not to catch your hand. This
may result in personal injury.
• The laser beam can be harmful to the human body. The
laser beam is confined in the laser scanner unit by a cover,
so there is no danger of the laser beam escaping during
normal machine operation. Read the following remarks and
instructions for safety.
- Never open covers other than those indicated in this
manual.
- Do not remove the caution label attached to the cover of
the laser scanner unit.

- If the laser beam should escape and enter your eyes,
exposure may cause damage to your eyes.
• If you operate this machine in manners other than the
control, adjustment, and operating procedures prescribed
in this manual, this may result in hazardous radiation
exposure.
• This machine is confirmed as the class 1 laser product in
IEC60825-1:2007.

Maintenance and Inspections
WARNING
• When cleaning the machine, turn off the machine and
computer, and unplug the interface cables and power plug.
Failure to do so can result in a fire or electrical shock.
• Unplug the power plug from the AC power outlet
periodically and clean the area around the base of the
power plug’s metal pins and the AC power outlet with a
dry cloth to remove all dust and grime. In damp, dusty,
or smoky locations, dust can build up around the power
plug and become damp, which can cause a short circuit,
resulting in a fire.
• Clean the machine with a well wrung out cloth dampened
with water or mild detergent diluted with water. Do not
use alcohol, benzene, paint thinner, or other flammable
substances. If flammable substances come into contact
with electrical parts inside the machine, this may result in a
fire or electrical shock.
• Some areas inside the machine are subject to high voltage.
When removing jammed paper or when inspecting inside
of the machine, be careful not to allow necklaces, bracelets,
or other metal objects to touch the inside of the machine,
as this can result in burns or electrical shock.
• Do not dispose of used toner cartridges in open flames.
This may cause the toner remaining inside the cartridges to
ignite, resulting in burns or fire.
• Confirm that the power plug or power connector is inserted
completely after cleaning the machine. Failure to do so can
result in an overheating and fire.
• Check the power cord and plug regularly. The following
conditions may result in fire, so please contact your local
authorized Canon dealer or the Canon help line.
- There are burn marks on the power plug.
- The blade on the power plug is deformed or broken.
- The power is turned OFF or ON when bending the power
cord.
- The coating of the power cord is damaged, cracked, or
dented.
- A part of the power cord becomes hot.
• Check regularly that the power cord and plug are not
handled in the following manner. Failure to do so can result
in a fire or electrical shock.
- The power connector is loosened.
- Stress is being applied to the power cord by a heavy
object or by fixing it with staples.
- The power plug is loosened.
- The power cord is tied in a bundle.
- A part of the power cord is put in an aisle.
- The power cord is put in front of the heating appliance.

CAUTION
• The fixing unit and its surroundings inside the machine
become hot during use. When removing jammed paper or
when inspecting the inside of the machine, do not touch
the fixing unit and its surroundings, as this may result in
burns.

• When removing jammed paper or when inspecting the
inside of the machine, do not expose yourself to the heat
emitted from the fixing unit and its surroundings for a
prolonged period of time. Doing so may result in low
temperature burns, even though you did not touch the
fixing unit and its surroundings directly, as this may result
in burns.
• If paper is jammed, remove the jammed paper so that
any pieces of paper do not remain inside the machine
according to the displayed message. Also, do not put your
hand in an area other than indicated areas, as this may
result in personal injuries or burns.
• When removing jammed paper or replacing a toner
cartridge, be careful not to get any toner on your hands or
clothing, as this will dirty your hands or clothing. If toner
gets on your hands or clothing, wash them immediately
with cold water. Washing with warm water sets the toner,
making it impossible to remove the toner stains.
• When removing jammed paper, be careful not to allow the
toner on the paper to scatter. The toner may get into your
eyes or mouth. If toner gets into your eyes or mouth, wash
them immediately with cold water and consult a physician.
• When loading paper or removing jammed documents or
paper, be careful not to cut your hands with the edges of
the paper.
• When removing a toner cartridge, remove the toner
cartridge carefully so as to prevent the toner from
scattering and getting into your eyes or mouth. If toner gets
into your eyes or mouth, wash them immediately with cold
water and consult a physician.
• Do not attempt to disassemble the toner cartridge. The
toner may scatter and get into your eyes or mouth. If toner
gets into your eyes or mouth, wash them immediately with
cold water and consult a physician.
• If toner leaks from the toner cartridge, be careful not to
inhale the toner or allow it to come into direct contact with
your skin. If the toner comes into contact with your skin,
wash with soap. If the skin becomes irritated or you inhale
the toner, consult a physician immediately.

Consumables
WARNING
• Do not dispose of used toner cartridges in open flames. This
may cause the toner to ignite, resulting in burns or fire.
• Do not store toner cartridges or paper in a location exposed
to open flames. This may cause the toner or paper to ignite,
resulting in burns or fire.
• When disposing of a toner cartridge, place the toner
cartridge into a bag to prevent the toner from scattering,
and then dispose of the toner cartridge according to local
regulations.

CAUTION
• Keep the toner cartridges and other consumables out of
the reach of small children. If the toner or other parts are
ingested, consult a physician immediately.
• Do not attempt to disassemble the toner cartridge. The
toner may scatter and get into your eyes or mouth. If toner
gets into your eyes or mouth, wash them immediately with
cold water and consult a physician.
• If toner leaks from the toner cartridge, be careful not to
inhale the toner or allow it to come into direct contact with
your skin. If the toner comes into contact with your skin,
wash with soap. If the skin becomes irritated or you inhale
the toner, consult a physician immediately.
• Do not pull out the sealing tape forcefully or stop at
midpoint, as this may cause toner to spill out. If toner gets
into your eyes or mouth, wash them immediately with cold
water and consult a physician.

Others
WARNING
• If you are using a cardiac pacemaker
This machine generates a low level magnetic field. If you
use a cardiac pacemaker and feel abnormalities, please
move away from this machine and consult your physician
immediately.

Telephone Equipment
When using telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
1. Do not use this machine near water (i.e., near a bathtub,
kitchen sink, or laundry tub), or in a wet basement or near a
swimming pool.
2. Avoid using the telephone during an electrical storm, as
there may be a remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity
of the leak.

Installation Requirements and Handling
In order to use this machine in a safe and trouble-free manner, install the machine in a place that fulfills the following conditions.
Also, read the remarks carefully.

Temperature and Humidity Conditions

Installation Requirements

• Temperature range: 50 to 86°F (10 to 30°C)
• Humidity range: 20 to 80 % RH (no condensation)

•
•
•
•

IMPORTANT
Protecting the machine from condensation
• To prevent condensation from forming inside the machine
in the following cases, let the machine adjust to the
ambient temperature and humidity for at least two hours
before use.
- When the room where the machine is installed is heated
rapidly
- When the machine is moved from a cool or dry location
to a hot or humid location
• If water droplets (condensation) form inside the machine,
this can result in paper jams or poor print quality.
When using an ultrasonic humidifier
When you are using an ultrasonic humidifier, it is therefore
recommended that you use purified water or other water that
is free of impurities.
If you use tap water or well water, impurities in the water will
be dispersed through the air. This can be trapped inside the
machine, causing degradation in print quality.

Power Supply Requirements

A location with sufficient space
A location with good ventilation
A location with a flat, even surface
A location able to fully support the weight of the machine

IMPORTANT
Do not install the machine in the following locations, as
this may result in damage to the machine.
• A location subject to dramatic changes in temperature or
humidity
• A location subject to condensation
• A poorly ventilated location
(If you use the machine for a long time or to perform a large
amount of printing in a poorly ventilated room, the ozone
or other odors generated by the machine may create an
uncomfortable working environment. In addition, chemical
particles are dispersed during printing; therefore, it is
important to provide adequate ventilation.)
• A location near equipment that generates magnetic or
electromagnetic waves
• A laboratory or location where chemical reactions occur
• A location exposed to salt air, corrosive gases, or toxic gases
• A location, such as on a carpet or mat, that may warp from
the weight of the machine or where the machine is liable
to sink.

120 to 127 V, 60 Hz

IMPORTANT
Precautions when connecting the power cord
• Do not connect this machine to an uninterruptible power
source.
• Use an AC power outlet exclusively for the machine. Do not
use the other sockets of the AC power outlet.
• Do not plug the power plug into the auxiliary outlet on a
computer.
Do not use the same AC power outlet for both the machine
and any of the following equipment.

Installation Space
Required installation space
MF4570dn
4" (100 mm)

31 5/8" (804 mm)

Feeder
cover

4" (100 mm)
4"
(100 mm)

4"
(100 mm)

Paper
cassette

29"
(735 mm)

24 1/4"
(617 mm)

4" (100 mm)

- Copy machine
- Air conditioner
- Shredder
- Equipment that consumes a large amount of electricity
- Equipment that generates electrical noise
• When unplugging the power cord, keep interval of 5
seconds or more before plugging it again.
Miscellaneous precautions
• The maximum power consumption of the machine is
1,090 W or less.
• Electrical noise or a dramatic drop in supplied voltage may
cause the machine or computer to operate incorrectly or
lose data.

MF4450
4" (100 mm)

30 7/8" (783.1 mm)

Feeder
cover

4" (100 mm)
4"
(100 mm)

4"
(100 mm)

Paper
cassette

24 1/4"
(616.2 mm)

29"
(734.7 mm)

4" (100 mm)

Maintenance and Inspections
IMPORTANT
• Follow the instructions in the caution label attached to this
machine.
• Avoid shaking or applying a shock to this machine.
• To prevent a paper jam, do not turn the power ON/OFF,
open/close the operation panel or rear cover, and load/
unload paper in the middle of printing operation.
• Be sure to remove the toner cartridge from the machine
when transporting the machine to a distance.
• To avoid exposing the toner cartridge to light, place it in the
protective bag included with this machine or wrap it in a
thick cloth.
• Clean this machine regularly. If this machine becomes
dusty, it may operate improperly.
• Use a modular cable of 3 m or shorter in length.
• Depending on your locale or your telephone connection,
you may be unable to perform data communication. In this
case, contact your local authorized Canon dealer or the
Canon help line.
• The repairing parts and toner cartridges for the machine
will be available for at least seven (7) years after production
of this machine model has been discontinued.

Customer Support
Customer Support (U.S.A.)
Your machine is designed with the latest technology to
provide trouble-free operation. If you encounter a problem
with the machine’s operation, try to solve it by using the
information in Chapter 9. If you cannot solve the problem
or if you think your machine needs servicing, contact Canon
Customer Care Center at 1-800-OK-CANON between the hours
of 8:00 A.M. to 8:00 P.M. EST Monday through Friday. On-line
support for 24 hours is also available at the website.
http://www.canontechsupport.com/
Customer Support (Canada)
Canon Canada Inc., offers a full range of customer technical
support options*:
• For step-by-step troubleshooting, e-mail technical support,
the latest driver or document downloads, and answers to
frequently asked questions, visit http://www.canon.ca/
• Free live technical support 9 A.M. to 8 P.M. EST Monday
through Friday (excluding holidays) for products still under
warranty 1-800-OK-CANON
• For the location of the authorized service facility nearest
you, visit http://www.canon.ca/ or 1-800-OK-CANON
• If the problem cannot be corrected by using one of the
above technical support options, repair options are
available at the time of your call to the live technical
support number above or via the website at
http://www.canon.ca/
* Support program specifics are subject to change without notice.

xii

Legal Notices
International ENERGY STAR Program
As an ENERGY STAR® Partner, Canon U.S.A., Inc. has
determined that this product meets the ENERGY
STAR Program for energy efficiency.
The International ENERGY STAR Office Equipment
Program is an international program that promotes
energy saving through the use of computers and
other office equipment.
The program backs the development and
dissemination of products with functions that
effectively reduce energy consumption. It is an
open system in which business proprietors can
participate voluntarily.
The targeted products are office equipment, such
as computers, displays, printers, facsimiles, and
copiers. The standards and logos are uniform
among participating nations.

IPv6 Ready Logo
The protocol stack included in this machine has
obtained the IPv6 Ready Logo Phase-1 established
by the IPv6 Forum.

(2) Rights holders of the SOFTWARE retain in all respects the
title, ownership and intellectual property rights in and to
the SOFTWARE. Except as expressly provided herein, no
license or right, expressed or implied, is hereby conveyed or
granted by rights holders of the SOFTWARE to you for any
intellectual property of rights holders of the SOFTWARE.
(3) You may use the SOFTWARE solely for use with the
PRODUCT.
(4) You may not assign, sublicense, market, distribute, or
transfer the SOFTWARE to any third party without prior
written consent of rights holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may transfer the
SOFTWARE only when (a) you assign to a transferee all of
your rights to the PRODUCT and all rights and obligations
under the conditions governing the SOFTWARE and
PRODUCT and (b) such transferee agrees in writing to be
bound by all these conditions.
(6) You may not decrypt, decompile, reverse engineer,
disassemble or otherwise reduce the code of the
SOFTWARE to human readable form.
(7) You may not modify, adapt, translate, rent, lease or loan
the SOFTWARE or create derivative works based on the
SOFTWARE.
(8) You are not entitled to remove or make separate copies of
the SOFTWARE from the PRODUCT.

Trademarks
Canon, the Canon logo, and imageCLASS are registered
trademarks of Canon Inc. in the United States and may also be
trademarks or registered trademarks in other countries.
Apple, Mac OS, and Macintosh are trademarks or registered
trademarks of Apple Inc. in the U.S. and/or other countries.
Microsoft, Windows and Windows Vista are either trademarks
or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
All other product and brand names are registered trademarks,
trademarks or service marks of their respective owners.

Copyright
© 2011 by Canon Inc. All rights reserved.
No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any
language or computer language in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise, without the prior written permission of Canon Inc.

Third Party Software
A. This Canon product (the “PRODUCT”) includes third-party
software modules. Use and distribution of these software
modules (the “SOFTWARE”) are subject to the conditions
below.

(9) The human-readable portion (the source code) of the
SOFTWARE is not licensed to you.
B. Notwithstanding A above, in case any other license
conditions accompany third-party software modules, these
software modules are subject to these other conditions, as
well.
ACCEPTANCE
THE TERMS OF THIS THIRD PARTY SOFTWARE STATED HERE
OR IN RELATED WARRANTY PROVISIONS SHALL BE DEEMED
ACCEPTED UPON YOUR USE OF THE PRODUCT FOR ONE OR
MORE OF ITS NORMAL PURPOSES, IF THERE HAS BEEN NO
OTHER PRIOR EXPRESS ACCEPTANCE.
THE TERMS OF THIS THIRD PARTY SOFTWARE GOVERN THE
THIRD PARTY SOFTWARE AS DELIVERED WITH THE PRODUCT
AND ALL UPDATED VERSIONS OF THE THIRD PARTY SOFTWARE
PROVIDED UNDER MAINTENANCE AGREEMENTS OR OTHER
SERVICE ARRANGEMENTS FOR THE PRODUCT WITH CANON
USA OR CANON CANADA OR THEIR RESPECTIVE AUTHORIZED
SERVICE ORGANIZATIONS.

The Software Subjected to Other Conditions
Please refer to eManual on a CD-ROM bundled with this
product, for more detail and corresponding license conditions.

(1) You agree that you will comply with any applicable export
control laws, restrictions or regulations of the countries
involved in the event that this product including the
SOFTWARE is shipped, transferred or exported into any
country.

xiii

Disclaimers
The information in this document is subject to change without
notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED,
EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT
LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE
LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES
RESULTING FROM THE USE OF THIS MATERIAL.

For CA, USA only
Included battery contains Perchlorate Material - special
handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for
details.

Legal Limitations on the Usage of Your Product and the Use of Images
Using your product to scan, print or otherwise reproduce
certain documents, and the use of such images as scanned,
printed or otherwise reproduced by your product, may be
prohibited by law and may result in criminal and/or civil
liability.
A non-exhaustive list of these documents is set forth below.
This list is intended to be a guide only. If you are uncertain
about the legality of using your product to scan, print or
otherwise reproduce any particular document, and/or of the
use of the images scanned, printed or otherwise reproduced,
you should consult in advance with your legal advisor for
guidance.
• Paper Money
• Money Orders
• Certificates of Deposit
• Postage Stamps (canceled or uncanceled)
• Identifying Badges or Insignias
• Selective Service or Draft Papers
• Checks or Drafts Issued by Governmental Agencies
• Motor Vehicle Licenses and Certificates of Title
• Travelers Checks
• Food Stamps
• Passports
• Immigration Papers
• Internal Revenue Stamps (canceled or uncanceled)
• Bonds or Other Certificates of Indebtedness
• Stock Certificates
• Copyrighted Works/Works of Art without Permission of
Copyright Owner

FCC (Federal Communications Commission)
imageCLASS MF4570dn: F159302
imageCLASS MF4450: F159502
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.

xiv

This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Use of shielded cable is required to comply with class B limits
in Subpart B of Part 15 of the FCC Rules. Do not make any
changes or modifications to the equipment unless otherwise
specified in this manual. If you make such changes or
modifications, you could be required to stop operation of the
equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. 1-800-OK-CANON

Users in the U.S.A.
Pre-Installation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine.
See Chapter 11, “Appendix,” for specific dimensions and
weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be
used.
2. Order an RJ11-C telephone wall jack (USOC), which
should be installed by the telephone company. If the
RJ11-C wall jack is not present, telephone/facsimile
operation is not possible.
3. Order a normal business line from your telephone
company’s business representative. The line should be
a regular voice grade line or an equivalent one. Use one
line per unit.
DDD (Direct Distance Dial) line
-orIDDD (International Direct Distance Dial) line if you
communicate overseas

C. Power Requirements
The machine should be connected to a standard 120 volt
AC, three-wire grounded outlet only.
Do not connect this machine to an outlet or power line
shared with other appliances that cause “electrical noise.” Air
conditioners, electric typewriters, copiers, and machines of
this sort generate electrical noise that often interferes with
communications equipment and the sending and receiving
of documents.
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the rear panel of this
equipment is a label that contains, among other information,
a product identifier in the format of US:AAAEQ##TXXXX. If
requested, this number must be provided to the telephone
company.
The REN (Ringer Equivalence Number) is used to determine the
number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices
not ringing in response to an incoming call. In most, but not all
areas, the sum of the RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected
to a line, as determined by the total RENs, contact the local
telephone company. The REN for this product is part of the
product identifier that has the format US: AAAEQ##TXXXX. The
digits represented by ## are the REN without a decimal point
(e.g., 10 is a REN of 1.0).
An FCC compliant telephone line cable and modular plug is
provided with this equipment. This equipment is designed
to be connected to the telephone network or premise wiring
using a compatible modular jack that is Part 68 compliant.
This equipment may not be used on coin service provided by
the telephone company. Connection to party lines is subjected
to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected
by the procedures described in this guide or the e-Manual,
disconnect the equipment from the telephone line cable and
disconnect the power cord.
The telephone line cable should not be reconnected or the
power switch turned ON until the problem is completely
resolved. Users should contact Canon Authorized Service
Facilities for servicing of equipment, Information regarding
Authorized Service Facility locations can be obtained by calling
Canon Customer Care Center (1-800-OK-CANON).
Rights of the Telephone Company
If this equipment (imageCLASS MF4570dn/MF4450) causes
harm to the telephone network, the telephone company may
temporarily disconnect service. The telephone company also
retains the right to make changes in facilities and services
that may affect the operation of this equipment. When such
changes are necessary, the telephone company is required to
give adequate prior notice to the user.
However, if advance notice is not possible, the telephone
company will notify the customer as soon as possible. Also,
the customer will be advised of his/her right to file a complaint
with the FCC if he/she believes it is necessary.

WARNING
The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device, including FAX machines, to send any message unless
such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification
of the business or other entity, or other individual sending the
message and the telephone number of the sending machine
or such business, other entity, or individual.
(The telephone number provided may not be a 900 number
or any other number for which charges exceed local or longdistance transmission charges.)

NOTE
In order to program this information into your machine, you
should complete the procedure for registering your name,
unit’s telephone number, time, and date in the Starter Guide.

Users in Canada
Pre-Installation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine.
See Chapter 11, “Appendix,” for specific dimensions and
weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be
used.
2. Order a CA11A modular jack, which should be installed
by the telephone company. If the CA11A jack is not
present, installation cannot occur.
3. Order a normal business line from your telephone
company’s business representative. The line should be
a regular voice grade line or an equivalent one. Use one
line per unit.
DDD (Direct Distance Dial) line
-orIDDD (International Direct Distance Dial) line if you
communicate overseas

NOTE
Canon recommends an individual line following industry
standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse dial)
telephones. A dedicated extension off a PBX (Private Branch
eXchange) unit without “Call Waiting” can be used with your
facsimile unit. Key telephone systems are not recommended
because they send nonstandard signals to individual
telephones for ringing and special codes, which may cause a
facsimile error.
C. Power Requirements
The power outlet should be a three-prong grounded
receptacle (Single or Duplex). It should be independent
from copiers, heaters, air conditioners, or any electric
equipment that is thermostatically controlled. The rated
value is 115 volts and 15 amperes. The CA11A modular jack
should be relatively close to the power outlet to facilitate
installation.

Notice
• This product meets the applicable Industry Canada
technical specifications.
• The Ringer Equivalence Number is an indication of the
maximum number of devices allowed to be connected to
a telephone interface. The termination of an interface may
consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices
does not exceed five.
• The REN of this product is 1.0.
• Before installing this equipment, users should ensure that
it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also
be installed using an acceptable method of connection. In
some cases, the company’s inside wiring associated with a
single line individual service may be extended by means of
a certified connector assembly (telephone extension cord).
The customer should be aware that compliance with the
above conditions may not prevent deterioration of service
in some situations.
• Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by
the supplier. Any repairs or alterations made by the user to
this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to
disconnect the equipment.
• Users should ensure for their own protection that the
electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if
present, are connected together. This precaution may be
particularly important in rural areas.

CAUTION
Users should not attempt to make such connections
themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.

NOTE
This equipment complies with the Canadian ICES-003 Class B
limits.

Utilisation au Canada
Conditions à Remplir Préalablement à L’installation d’un
Télécopieur Canon
A. Emplacement
Prévoir une table, un meuble, ou un bureau suffisamment
solide et de taille appropriée (voir le chapitre 11, Annexe
(Appendix), pour les indications de poids et dimensions).
B. Installation téléphonique
1. Une seule ligne téléphonique (tonalités ou impulsions)
doit être utilisée.
2. Il faut commander un jack modulaire CA11A qui sera
installé par la compagnie téléphonique. Sans ce jack, la
mise en place serait impossible.
3. Si vous vous abonnez à une nouvelle ligne, demandez
une ligne d’affaires normale de qualité téléphonique
courante ou équivalente. Prenez un abonnement d’une
ligne par appareil.
Ligne automatique interurbaine
ou
Ligne automatique internationale (si vous communiquez
avec les pays étrangers)

xvi

NOTE
Canon vous conseille d’utiliser une ligne individuelle conforme
aux normes industrielles, à savoir:
ligne téléphonique 2,500 (pour appareil à clavier) ou 500
(pour appareil à cadran/impulsions). Il est également possible
de raccorder ce télécopieur à un système téléphonique à
poussoirs car la plupart de ces systèmes émettent des signaux
d’appel non normalisés ou des codes spéciaux qui risquent de
perturber le fonctionnement du télécopieur.
C. Condition d’alimentation
Raccordez le télécopieur à une prise de courant plus terre
à trois branches, du type simple ou double, et qui ne sert
pas à alimenter un copieur, un appareil de chauffage, un
climatiseur ou tout autre appareil électrique à thermostat.
L’alimentation doit être de 115 volts et 15 ampères. Pour
faciliter l’installation, le jack CA11A doit être assez proche
de la prise de courant.
Remarques
• Le présent matériel est conforme aux spécifications
techniques applicables d’Industrie Canada.
• Avant d’installer cet appareil, l’utilisateur doit s’assurer qu’il
est permis de le connecter à l’équipement de la compagnie
de télécommunication locale et doit installer cet appareil
en utilisant une méthode de connexion autorisée. Il se
peut qu’il faille étendre la circuiterie intérieure de la ligne
individuelle d’abonné, qui a été installée par la compagnie,
au moyen d’un jeu de connecteurs homologués (rallonge
téléphonique).
• L’attention de l’utilisateur est attirée sur le fait que le respect
des conditions mentionnées ci-dessus ne constitue pas une
garantie contre les dégradations de qualité du service dans
certaines circonstances.
• L’indice d’équivalence de la sonnerie (IES) sert à indiquer le
nombre maximal de terminaux qui peuvent être raccordés
à une interface téléphonique. La terminaison d’une
interface peut consister en une combinaison quelconque
de dispositifs, à la seule condition que la somme d’indices
d’équivalence de la sonnerie de tous les dispositifs n’excède
pas 5.
• Le nombre d’équivalents sonnerie (REN) de ce produit est
1,0.
• Les réparations sur un appareil certifié doivent être
faites par une société d’entretien canadienne autorisée
par le Gouvernement canadien et désignée par le
fournisseur. Toute réparation ou modification que
pourrait faire I’utilisateur de cet appareil, ou tout
mauvais fonctionnement, donne à la compagnie de
télécommunication le droit de débrancher I’appareil.
• Pour sa propre protection, I’utilisateur doit s’assurer que
les prises de terre de I’appareil d’alimentation, les lignes
téléphoniques et les tuyaux métalliques internes, s’il y
en a, sont bien connectés entre eux. Cette précaution est
particulièrement importante dans les zones rurales

CAUTION
Au lieu d’essayer de faire ces branchements eux-mêmes, les
utilisateurs sont invités à faire appel à un service d’inspection
faisant autorité en matière d’électricité ou à un électricien,
selon le cas.

NOTE
Respecte les limites de la classe B de la NMB-003 du Canada.

Laser Safety
This machine complies with 21 CFR Chapter 1 Subchapter J as
a Class 1 laser product under the U.S. Department of Health
and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety
Act of 1968. This means that the machine does not produce
hazardous radiation.
Since radiation emitted inside the machine is completely
confined within protective housings and external covers, the
laser beam cannot escape from the machine during any phase
of user operation.

CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the
U.S. Food and Drug Administration implemented regulations
for laser products on August 2, 1976. These regulations
apply to laser products manufactured from August 1, 1976.
Compliance is mandatory for products marketed in the United
States.

CAUTION
Use of controls, adjustments, or performance of procedures
other than those specified in this manual may result in
hazardous radiation exposure.
The label is attached to the laser scanner machine inside the
machine and is not in a user access area.

xvii

xviii

Chapter

Before Using the Machine
This category describes the features of the machine and its useful functions.

Names and Functions on Each Part of the
Machine

1-2

Front Side

1-2

Back Side

1-3

Interior

1-3

Multi-purpose Tray

1-4

Paper Cassette

1-4

Operation Panel

1-5

LCD (Standby Mode)

1-6

Copy Mode

1-6

Fax Mode

1-6

Scan Mode

1-6

Navigating the Menu

1-7

Entering the Menu Screen

1-7

Scrolling Through Menu Items

1-7

Selecting a Menu Item

1-7

Specifying values using the navigation keys

1-8

Returning to the Default Screen

1-8

Text Input Method
Entering Text Except for IP Address

1-9
1-9

Changing the Entry Mode

1-9

Entering Text, Symbols, and Numbers

1-9

Moving the Cursor (Entering a Space)

1-9

Deleting text, symbols, or numbers

1-9

Entering IP Address (MF4570dn Only)

1-10

Setting the Sleep Timer

1-11

Setting the Current Date and Time

1-12

1-1

Names and Functions on Each Part of the Machine
This section describes the parts and functions of the machine.

Front Side
Before Using the Machine

(10)
(4)
(5)
(1)
(2)

(6)
(7)

(14)
(11)

(8)

(3)

(9)

(12)
(13)

(15)

(1)

Document guides
Adjust to the width of the document.

(2)

Feeder cover
Open this cover to clear paper jams.

(3)

Lift handles

(4)

Tray extension

Hold this handle to lift or transport the machine.

(5)

(11) Scanning area
Scans documents from the feeder.

(13) Paper stopper

Document return tray
Operation panel

Output tray
Copies, printed documents, and faxes are output here.

1-2

The feeder can automatically scan documents continuously.

Document feeder tray

Controls the machine using this panel.
“Operation Panel” (→P.1-5)

(8)

(10) Feeder

(12) Output tray extension

Documents are returned here.

(7)

Paper cassette
Load paper here.
“Paper Cassette” (→P.1-4)

Pull out the tray extension when the paper is hanging out of the
document feeder tray such as Legal size paper.
Place documents here.

(6)

(9)

Extends the tray for large paper sizes.
Prevents paper from falling from the output tray.

(14) Platen glass
Place a document here.

(15) Ventilation slots (MF4570dn only)
Allows inside of the machine to cool down.
Leave enough space around the machine to allow heat to
escape sufficiently.

Back Side
● MF4570dn

● MF4450

(3)

(1)
(2)

ND XT.
HAT E
SE

(5)
(6)

(1)

ND XT.
HAT E
SE
E
LIN

E
LIN
ND EX
HAT
SE

T.
ND EX
HAT
SE

E
LIN

(7)

(8)

(1)

(2)

Rating label

(5)

Power switch

The average values of the required voltage and current are
specified.

(6)

External device jack
Connect an external telephone.

(7)

Telephone line jack
Connect a telephone line.

USB port
Connect to a computer via a USB cable.

(4)

Turn the power ON or OFF.

Rear cover (MF4570dn only)
Open this cover to clear paper jams.

(3)

(8)

Before Using the Machine

(4)

(8)

Power socket
Connect the power cord.

LAN port (MF4570dn only)
Connect to a network via a LAN cable.

Interior

(1)
(3)

(2)

(1)

Scanning platform

(4)
(5)

(4)

Open this platform to replace the toner cartridge or clear paper
jams.

(2)

Toner cover
Open this cover to replace the toner cartridge or clear paper
jams.

(3)

Toner guides
When inserting the toner cartridge, fit the protrusions on the
toner cartridge into these guides.

(5)

Transfer roller
Transfers toner onto paper.

Paper exit guide
Open this guide to clear paper jams.

1-3

Multi-purpose Tray

Before Using the Machine

(1)

Paper guides
Adjust to the width of the paper.

Paper Cassette

(2)
(1)

(1)

Dust cover
Protects paper in the paper cassette from dirt and dust.

1-4

(2)

Paper guides
Adjust the paper guides to the paper.

Operation Panel
(4)

(1)
(2)

(6)

(3)

(1)

(2)

(3)

(4)

(5)

(6)

Mode switching keys

Press to switch the mode to copy, fax, or scan.

[One-touch Speed Dial] keys
([01]/[02]/[03]/[04] keys)

Press to specify recipients registered under one-touch keys.

[Address Book] key

Press to search recipients registered under one-touch keys or coded dial codes.

[Redial] key

When faxing, press to redial the last number.

[Pause] key

When entering a fax number, press to insert a pause.

[Hook] key

Press to dial a number without lifting the telephone handset.

[Menu] key

Press to specify or register various settings.

[Paper Settings] key

Press to specify paper size and type for the paper cassette or multi-purpose tray.

[Report] key

Press to manually print reports and lists. You can also specify whether to print a report
automatically.

[Status Monitor/Cancel] key

Press to view or cancel jobs. You can also check the status of the network* and machine.

LCD

During normal operation, displays messages and prompts. When adjusting the settings,
displays your selections, text, and numbers.

[Reset] key

Press to reset the settings. (Press to reset the copy/scan/fax mode to the standard mode.)

[Back] key

Press to return to the previous screen.

[

] key

Press to scroll up or to increase a value.

[

] key

Press to scroll down or to decrease a value.

[

] key

Press to return to the previous screen or move the cursor to the left. While fax
communication sound is ringing, press to decrease the volume.

[

] key

Press to proceed to the next screen or move the cursor to the right. While fax
communication sound is ringing, press to increase the volume.

[OK] key

Press to confirm an action or setting.

Numeric keys ([0]-[9] keys)

Enter letters and numbers.

[*] key

Press to switch the character entry mode. When sending a fax, press to switch between
pulse and tone dialing.

[#] key

Press to enter symbols.

[Clear] key

Deletes letters and numbers.

[Energy Saver] key

Press to manually set or cancel the Sleep mode. The Energy Saver light will be green when
in Sleep mode.

[Stop] key

Press to cancel jobs.

[Start] key

Press to start copying, scanning, or sending a fax.

[Processing/Data] indicator

The indicator blinks while sending or receiving faxes and remains lit when jobs are
waiting in memory.

[Error] indicator

The indicator blinks when an error occurs.

Before Using the Machine

(5)

* The function is only for MF4570dn.

1-5

Scan Mode

LCD (Standby Mode)

When using the scan function, press [
] to switch
to the standby display.
When the scan mode screen is displayed, you can select
items by pressing [ ] or [ ].
The currently selected item will be highlighted with a black
background, and pressing [OK] will advance to the next
screen.

This section describes the following screens.
• Copy Mode
• Fax Mode
• Scan Mode

NOTE

Select the scan type.

Before Using the Machine

Display of the standby mode
• You can change the standby display which appears when the
power switch is turned ON.
e-Manual → Basic Operation → Customizing Display
Settings → Setting the Default Screen
• When the machine is idle for 2 minutes, the display returns to
standby mode.
e-Manual → Basic Operation → Customizing Timer Settings
→ Specifying the Auto Reset Timer

Copy Mode
When using the copy function, press [
to the standby display.

] to switch

Copy: Press Start
100% 1
LTR
Density: +
-0
Original Type: Text...
2-Sided: Off

When the copy mode screen is displayed, you can select
items by pressing [ ] or [ ].
The currently selected item will be highlighted with a black
background, and pressing [OK] will advance to the next
screen.

Copy: Press Start
100% 1
LTR
Density: +
-0
Original Type: Text...
2-Sided: Off

Fax Mode
When using the fax function, press [
the standby display.

] to switch to

Specify destination.
01/01/2011 12:52AM
RX Mode: Auto
Resolution: 200 x 1...
When the fax mode screen is displayed, you can select
items by pressing [ ] or [ ].
The currently selected item will be highlighted with a black
background, and pressing [OK] will advance to the next
screen.

Specify destination.
01/01/2011 12:52AM
RX Mode: Auto
Resolution: 200 x 1...

1-6

Computer
Remote Scanner

Navigating the Menu
This section describes how to navigate the menu and specify
values on the menu screen.
Keys to be used for this operation

The scrollbar at the right side of the screen indicates that
more items are available.
To select an item that is not shown on the screen, press [ ]
or [ ] to scroll through menu items.
The currently selected item is highlighted with a black
background.

Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings

Entering the Menu Screen
Press [

] (Menu) to enter the menu screen.

Selecting a Menu Item
Press [OK] to select a highlighted menu.
If there are submenus available, you can also press [
select the item and proceed to the next screen.
You can return to the previous screen by pressing [
(Back) or [ ].

Before Using the Machine

Back

Scrolling Through Menu Items

] to
]

Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings
[OK] or [Ź]

[Back] or [Ż]

Timer Settings
Time & Date Settings
Sleep Timer
Auto Reset Timer
Screen After Auto R...

1-7

Specifying values using the navigation keys
Specifying values
Situation

Screen example

Procedure

Correct Density
When moving through the bars to
adjust levels such as density

Before Using the Machine

Press [

] or [

] to adjust the level.

Press [

] or [

] to specify the value.

NOTE

Numeric key icon

Available values

Auto Reset Timer
When selecting a value to set a
timer

You can specify any value shown in the parentheses at
the bottom of the screen.

minutes

When the numeric key icon is displayed on the
screen

(0=Off, 1-9)

When entering a series of numbers
or letters such as PIN

System Manager PIN
*******

1 2 3 4 5 6 7 8 9 0

Confirming the input
To confirm the input:
• Press [OK].
• When appears on the display, press [

] or [

You can also enter values with the numeric keys.
“Text Input Method” (→P.1-9)

Press [ ], [ ], [ ], or [ ] to select a number or
character, and then press [OK] to enter the number or
character.
To clear a number or character, select , and then press
[OK].

NOTE
You can also use the numeric keys
You can also enter values with the numeric keys.
“Text Input Method” (→P.1-9)

] to select , and then press [OK].

Returning to the Default Screen
From the menu screen, press [
] (Menu) to exit the
menu screen and return to the default screen.

NOTE
If you press [

] (Menu) before you press [OK]

The specified settings will not be saved.

1-8

Text Input Method
When entering the followings, see “Entering IP Address
(MF4570dn Only).”
• IP address
• Subnet mask
• Gateway address
• DNS server address

Moving the Cursor (Entering a Space)
Move the cursor by pressing [ ] or [ ].
To enter a space, move the cursor to the end of the text and
press [ ].

To delete text, numbers, or symbols, press [
] (Clear).
To delete all text, numbers, or symbols, press and hold
[
] (Clear).

Entering Text Except for IP Address
Enter information (text, symbols, and numbers) into the
machine using the following keys.
Keys to be used for this operation

Tone, Numeric keys,
SYMBOLS, Clear

Example: Enter .

1
2

Changing the Entry Mode

Entry Mode: A

Available text

Alphabet (capital letters) and symbols

Alphabet (small letters) and symbols

<12>

Numbers

Entry mode:

] (Symbols)

Entry mode:

@.-_/

Entry mode:
<12>
1

ABC

abc

DEF

def

GHI

ghi

] until the letter “A” appears on the

Press [
display.

] until the letter “N” appears on the

Press [
display.

] until the letter “O” appears on the

JKL

jkl

MNO

mno

PQRS

pqrs

TUV

tuv

wxyz

WXYZ

Press [
display.

Entry Mode: A

Entering Text, Symbols, and Numbers
Keys
used

] until the letter “C” appears on the

Entry Mode: A

Press [ ] to select , and then press [OK]. You
can also press [
] (Tone) to change the entry mode.

Enter with the numeric keys or [

Press [
display.

Entry Mode: A

Entry mode

Ensure that the input mode is .

Before Using the Machine

Deleting text, symbols, or numbers

(Not available)

- . * # ! ”, ; : ^ ` _ = / | ’?
$@%&+\()[]{}<>

(Not available)

Entry Mode: A

1-9

Press [
display.

] until the letter “N” appears on the

Entry Mode: A

Before Using the Machine

Press [ ] or [ ] to select , and then
press [OK].

Entering IP Address (MF4570dn Only)
Enter numbers using the following keys.
Keys to be used for this operation

Numeric keys, Clear

Use the numeric keys to enter numbers.
IP Address
192.168.000.080

1 2 3 4 5 6 7 8 9 0

* Enter numbers by three digits.
To specify “192.168.0.80,” enter “192.168.000.080.”
(If the number is less than three digits, add “0” before the
number.)

Deleting numbers
To delete a number, press [
] (Clear).
To delete all numbers, press and hold [

When you are finished entering, press [ ] or [ ]
to select , and then press [OK].
IP Address
192.168.000.080

1 2 3 4 5 6 7 8 9 0

1-10

] (Clear).

Setting the Sleep Timer
The entry is applied.The machine returns to sleep mode
automatically when it is idle for a specified length of time.

Keys to be used for this operation

Press [ ] or [ ] to specify the time, and then
press [OK].
You can also enter values using the numeric keys.
* We recommend that you use this option in the default setting.

minutes

(10-240)
OK

NOTE

1
2

Press [

You may specify the auto sleep timer between <10> minutes and
<240> minutes, in one minute interval. The default value for this
setting is <10> minutes.

Press [ ] or [ ] to select , and
then press [OK].
Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings

Specifying the auto sleep timer

] (Menu).

Press [
screen.

Before Using the Machine

Sleep Timer

] (Menu) to close the menu

NOTE
When entering sleep mode

Press [ ] or [ ] to select , and
then press [OK].
Timer Settings
Time & Date Settings
Sleep Timer
Auto Reset Timer
Screen After Auto R...

[

] (Energy Saver) will be lit green.

To enter sleep mode manually
Press [
] (Energy Saver).
* The machine does not enter the sleep mode, if you press
[
] (Energy Saver) in 10 seconds after the machine resumes
from the sleep mode.

The machine will not enter sleep mode when
• the machine is in operation
• the Processing/Data indicator is lit or blinking
• a message appears on the display and the Error indicator blinks
(except when is displayed)
• the machine is performing adjustment or cleaning
• there is a paper jam
• the handset of the external telephone is off the hook
• documents are set in the feeder

The machine will wake from sleep mode when
•
•
•
•
•
•

you press [
] (Energy Saver)
receiving a fax or phone call
the external telephone is off the hook
a print job from a computer begins
documents are set in the feeder
the machine is connected to a computer via a USB cable

1-11

Setting the Current Date and Time
Specify a display format for the date and time and set the
current date and time.
The specified date and time are used for some fax functions
and reports.
Keys to be used for this operation

Before Using the Machine

1
2

Press [

Overview

Operation

Specifies
the display
format for
dates.

Press [ ] or [ ] to select one of
following display formats, and then
press [OK].
You can select a display format from
the following three options.
• MM/DD/YYYY
• DD/MM YYYY
• YYYY MM/DD

<12/24
Hour
Clock>

Specifies
the display
format for
time.

Press [ ] or [ ] to select a display
format, and then press [OK].
You can select a display format from
the following two options.
• 12 Hour (AM/PM)
• 24 Hour
Use the numeric keys to enter the date
and time, and then press [OK].
You can also enter the date and time
by pressing [ ] or [ ] to move the
cursor, and then pressing [ ] or [ ] to
select a number.
Press [ ] or [ ] to switch between
and .

] (Menu).

Press [ ] or [ ] to select , and
then press [OK].
Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings

Settings

Current Time Settings

Press [ ] or [ ] to select ,
and then press [OK].

01/01 2011 12:52 AM

Specifies
the current
time and
date.

Timer Settings
Time & Date Settings
Sleep Timer
Auto Reset Timer
Screen After Auto R...

Press [ ] or [ ] to select a setting item, and then
press [OK].
Time & Date Settings
Date Display Type
12/24 Hour Clock
Current Time Settings
Daylight Savings

1-12

Press [
screen.

Specifies
the daylight
savings
time.

To use daylight savings time,
1. Press [ ] or [ ] to select ,
and then press [OK].
2. Specify the starting date of the
daylight savings time.
- Press [ ] or [ ] to select
, and then press [OK].
- Select the starting month, and
then press [OK].
- Press [ ] or [ ] to select ,
and then press [OK].
- Select the starting week, and then
press [OK].
- Select the starting day, and then
press [OK].
- Press [ ] or [ ] to select
, and then press [OK].
3. Repeat step 2 to specify the ending
date.

] (Menu) to close the menu

Chapter

Document and Paper Handling

Document Requirements

2-2

Scanning Range

2-2

Copy

2-2

FAX

2-3

Scan

2-3

Placing Documents

2-4

Placing Documents on the Platen Glass

2-4

Loading Document in the Feeder

2-4

Paper Requirements

2-6

Paper Size

2-6

Paper Type

2-7

Printable Range

2-8

Loading Paper

2-9

In the Paper Cassette

2-9

In the Multi-Purpose Tray

2-11

Precautions when Loading Paper

2-12

Paper Loading Capacity

2-12

Paper Loading Orientation

2-13

When printing paper with a letterhead or logo
(previously printed paper)

2-13

Printing on Envelopes

2-13

Setting a Paper Size and Type
Setting a Custom Paper Size

Selecting Print Side (MF4570dn Only)

2-14
2-14

2-16

When setting this item to
(the default setting)

2-16

When setting this item to

2-16

2-1

Document Requirements
Platen glass

Feeder

Document and Paper Handling

Document type

•
•
•
•
•
•

Size (W x L)

Maximum 8 1/2” x 11 3/4” (215.9 mm x 297 mm)

Maximum 8 1/2” x 14” (216 mm x 356 mm)
Minimum 5 7/8” x 4 1/8” (148 mm x 105 mm)

Weight

Maximum 4.4 lb (2 kg)

13.3 to 27.9 lb Bond (50 to 105 g/m2)

Paper Capacity

1 sheet

Maximum 35 sheets *2

Plain paper
Heavy paper
Photograph
Small documents (e.g., index cards)
Special types of paper (e.g., tracing paper, transparencies, etc.) *1
Booklet (Up to 3/4” (20 mm) thickness)

Plain paper
(Multi-page documents of the same size, thickness and
weight/onepage documents)

When copying transparent documents such as tracing paper or transparencies, use a piece of plain white paper to cover the document after
placing it face-down on the platen glass.
21 lb Bond (80 g/m2) paper

IMPORTANT
When placing document
Place the document after glue, ink or correction fluid on the document is completely dry.

To prevent paper jams in the feeder
Do not use any of the following.
• Wrinkled or creased paper
• Carbon paper or carbon-backed paper
• Curled or rolled paper
• Coated paper
• Torn paper
• Onion skin or thin paper
• Documents with staples or paper clips attached
• Paper printed with a thermal transfer printer
• Transparency

Scanning Range
Ensure your document’s text and graphics fall within the area specified in the following diagram.
* Note that the margin widths listed below are rough standards and there may be slight variations in actual use.
* The loading orientation of documents is as follows.
- Platen glass: With the document facing down
- Feeder: With the document loaded in the document feeder tray

Copy
Platen Glass

1/4 in.
(5 mm)

2-2

Feeder

1/4 in.
(5 mm)

FAX
Platen Glass

1/8 in.
(3 mm)

Feeder

1/8 in.
(3 mm)
3/64 in.
(1 mm)

1/8 in.
(3 mm)

1/8 in.
(3 mm)
3/64 in.
(1 mm)

3/64 in.
(1 mm)

Scan
Platen Glass

1/16 in.
(1.5 mm)

Feeder

1/16 in.
(1.5 mm)

Document and Paper Handling

3/64 in.
(1 mm)

2-3

Placing Documents
This section describes placing the documents on the platen
glass or loading them in the feeder.

When scanning is complete, remove the document from the
platen glass.

Placing Documents on the Platen Glass

Open the feeder.

CAUTION
Precautions when closing the feeder

Document and Paper Handling

• Be careful not to get your fingers caught. This may
cause personal injury.
• Do not press down the feeder forcefully. This may
damage the platen glass and cause personal injury.

Loading Document in the Feeder

1
2

Place a document face down.

Open the document feeder.

Spread the document guides a little wider than
the document width.

Align the document with the appropriate paper
size marks.
If your document does not match any of the paper size marks, align
the center of your document with the arrow mark.

3
A4

If loading large-sized documents, pull out the tray
extension.

Pull out the tray extension when the document is hanging out of
the document feeder tray.

Close the feeder gently.
The machine is ready to scan the document.

2-4

Fan the document stack and align the edges of
the pages.

IMPORTANT
Up to 35 documents can be loaded

Thoroughly fan in
small batches

Align the edges on a
flat surface a few times

If more than 35 documents are loaded, paper jams may occur, or
the documents may not be scanned.

While scanning a document
Do not add or remove documents.

When scanning documents is complete
Remove the documents from the document delivery tray to avoid
paper jams.

Avoid scanning the same document more than 30 times.
When scanned repeatedly, documents can become folded or torn,
which may cause paper jams.

Neatly place the documents face up.
• Load the document under the load limit guides (A).
• Ensure that the paper stack does not exceed the load limit marks
(B).

(A)

• If the document guides are too loose or too tight, this may result
in misfeeds or paper jams.
• Printouts may be askew depending on the printing environment.
Properly load paper to reduce the symptom.

Document and Paper Handling

Be sure to align the document guides with the width of
the paper

(B)

Align the document guides to fit the width of the
document.
The machine is ready to scan the document.

2-5

Paper Requirements
Paper Size
The available paper sizes are as follows.
○ : Available

: Not available
Paper source

Paper size

Document and Paper Handling

Paper cassette

Multi-purpose tray

A4 (8 1/4” x 11 3/4” (210 mm x 297 mm)) *1 *2

○

B5 (7 1/8” x 10 1/8” (182 mm x 257 mm))

○

A5 (5 7/8” x 8 1/4” (148 mm x 210 mm))

○

Letter (8 1/2” x 11” (216 mm x 279 mm)) *1 *2

○

Statement (5 1/2” x 8 1/2” (140 mm x 216 mm))

○

Executive (7 1/4” x 10 1/2” (184 mm x 267 mm))

○

Officio (8 1/2” x 12 1/2” (216 mm x 318 mm)) *1

○

Legal (8 1/2” x 14” (216 mm x 356 mm))

○

M-officio (8 1/2” x 13 3/8” (216 mm x 341 mm)) *1

○

Government - Letter (8” x 10 1/2” (203 mm x 267 mm))

○

Government - Legal (8” x 13” (203 mm x 330 mm))

○

Foolscap (8 1/2” x 13” (216 mm x 330 mm)) *1

○

A-foolscap (8 1/8” x 13 3/8” (206 mm x 338 mm))

○

Envelope COM10 (4 1/8” x 9 1/2” (104.7 mm x 241.3 mm)) *3

○

Envelope Monarch (3 7/8” x 7 1/2”(98.4 mm x 190.5 mm)) *3

—

○

Envelope C5 (6 3/8” x 9” (162 mm x 229 mm)) *3

○

Envelope B5 (6 7/8” x 9 7/8” (176 mm x 250 mm)) *3

○

B-officio (8 1/2” x 14” (216 mm x 355 mm))

Envelope DL (4 3/8” x 8 5/8” (110 mm x 220 mm))
Index Card (3” x 5” (76 mm x 127 mm))
Custom Paper Size
*1
*2
*3
*4

—

○

○ *4

○ *5

Only in MF 4570dn, auto 2-sided print is available.
Received documents, reports, or lists can be printed.
Use envelopes with the flap closed.
You can load paper of the following custom paper sizes.
* Width 3” to 8 1/2” (76.2 to 216 mm); Length 8 1/4” to 14” (210 to 356 mm)
You can load paper of the following custom paper sizes.
* Width 3” to 8 1/2” (76.2 to 216 mm); Length 5” to 14” (127 to 356 mm)

NOTE
Default paper size
The default paper size is Letter. If you use a different paper size, change the paper size settings.
“Setting a Paper Size and Type” (→P.2-14)

2-6

Paper Type
The available paper types are as follows.
Paper Source
Paper Type

Plain paper *1

16 to 21 lb Bond (60 to 80 g/m²)
21 to 24 lb Bond (80 to 90 g/m²)
24 to 28 lb Bond (90 to 105 g/m²)

Heavy paper

[Plain Paper]
[Plain Paper L]*2
[Heavy Paper 1]

Paper Capacity
(Paper Cassette)
250 sheets
170 sheets

Paper Capacity
(Multi-purpose Tray)
1 sheet

170 sheets

1 sheet

100 sheets

1 sheet

45 to 60 lb Cover (120 to 163 g/m²)

[Heavy Paper 2]

100 sheets

1 sheet

16 to 24 lb Bond (60 to 90 g/m²)

[Rough Paper 1]

100 sheets

1 sheet

24 to 32 lb Bond (90 to 120 g/m²)

[Rough Paper 2]

100 sheets

1 sheet

45 to 60 lb Bond (120 to 163 g/m²)

[Rough Paper 3]

100 sheets

1 sheet

Recycled paper *1

16 to 21 lb Bond (60 to 80 g/m²)

[Recycled Paper]

250 sheets

1 sheet

Color paper *1

16 to 21 lb Bond (60 to 80 g/m²)

[Color Paper]

250 sheets

1 sheet

Transparency *3

[Transparency]

50 sheets

1 sheet

Label

[Labels]

100 sheets

1 sheet

Index Card

[Index Card]

Not available

1 sheet

[Envelope]

20 envelopes

1 envelope

Envelope
*1
*2

*3
*4

Document and Paper Handling

Rough paper

28 to 32 lb Bond (105 to 120 g/m²)

Printer Driver Setting

Only in MF4570dn, auto 2-sided print is available.
If printed paper curls when [Plain Paper] is selected, set paper type to [Plain Paper L]. However, the toner fixation may be not as good when
[Plain Paper L] is set.
Use only the transparencies designed for laser printers.
You can set Envelope Monarch only in the multi-purpose tray.

To prevent paper jams, do not use the following types of paper.
• Wrinkled or creased paper

CAUTION

• Curled or rolled paper

If you print on damp paper

• Torn paper

The following problems may occur.
• Steam is emitted from the printer output
area.
• Water droplets form on the back side of
the operation panel and in the output
area.
Because moisture in the paper is evaporating
due to the heat generated when toner fixes,
this is not a malfunction. (This is likely to
occur when the room temperature is low.)
If you smell a burnt odor, however,
immediately turn OFF the machine, unplug
the power plug from the AC power outlet,
and then contact your local authorized
Canon dealer or the Canon help line.
Continued use can result in a fire or electrical
shock.

• Damp paper
• Very thin paper
• Paper printed with a thermal transfer printer (Do not copy on the reverse side.)

The following types of paper do not print well:
• Highly textured paper
• Very smooth paper
• Glossy paper

Make sure the paper is free from dust, lint, and oil stains.
Make sure to test paper before purchasing large quantities.
Store all paper wrapped and on a flat surface until ready
for use. Keep opened packs in their original packaging in a cool,
dry location.
Store paper at 64.4 to 75.2°F (18 to 24°C), 40 % to 60 % RH.

2-7

Printable Range
The shaded area indicates the approximate printable area of A4 paper. Note that the margin widths listed below are rough
standards and there may be slight variations in actual use.

1/4 in.
(5 mm)

Document and Paper Handling

2-8

1/4 in.
(5 mm)

Loading Paper
This section describes how to load paper in the paper cassette
and the multi-purpose tray.

NOTE
If you use paper of a different size or type

Gently load the paper into the paper cassette
with the print side face up, until the edge of the
paper stack meets the back of the paper cassette.
“Paper Loading Capacity” (→P.2-12)
“Paper Loading Orientation” (→P.2-13)
Ensure that the paper stack does not exceed the load limit guides
(A).

(A)

In the Paper Cassette
Before loading paper in the paper cassette, see “Precautions
when Loading Paper” (→P.2-12).

Lift the dust cover.

Document and Paper Handling

The default paper size/type is set to and in the setting menu. If you use a different paper
size or paper type, you need to change the paper settings.
“Setting a Paper Size and Type” (→P.2-14)

When loading envelopes
(1) Close the envelope flap.

Spread the paper guides a little wider than the
paper size.

(2) Place the stack of envelopes on a flat surface, flatten them to
release any remaining air, and ensure that the edges are pressed
tightly.

* If you want to change the size of the paper to be loaded, be
sure to register the paper size in “Setting a Paper Size and Type”
(→P.2-14).

2-9

(3) Loosen any stiff corners of the envelopes and flatten curls as
shown in the figure.

Close the dust cover.
When loading paper that is longer than the length of the
paper cassette
Lift the dust cover extension.

Document and Paper Handling

(4) Align the edges of the envelopes on a flat surface.

Pull out the output tray extension, and then lift
the paper stopper.

(2)
(5) Gently load the envelopes into the paper cassette with the print
side face up, until the edge of the envelope stack meets the
back of the paper cassette.

Adjust the paper guides to the width of the paper.

(1)

Specify the loaded paper size and type.
“Setting a Paper Size and Type” (→P.2-14)

2-10

Adjust the paper guide to the length of the paper.

In the Multi-Purpose Tray

Adjust the paper guides to the paper.

Before loading paper in the multi-purpose tray, see
“Precautions when Loading Paper” (→P.2-12).
Use the multi-purpose tray when you want to copy or print on
a paper that is different from what is in the paper cassette.
You can load a single sheet of paper in the multi-purpose tray.

Spread the paper guides a little wider than the
paper.
Pull out the output tray extension, and then lift
the paper stopper.

(2)

Gently insert the paper into the multi-purpose
tray with the print side face up.

(1)

Document and Paper Handling

“Paper Loading Capacity” (→P.2-12)
“Paper Loading Orientation” (→P.2-13)
Ensure that the paper stack does not exceed the load limit guides
(A).

Specify the loaded paper size and type.
“Setting a Paper Size and Type” (→P.2-14)

(A)

When loading envelopes
(1) Close the envelope flap.

(2) Loosen any stiff corners of the envelope and flatten curls as
shown in the figure.

(3) Gently insert the envelope into the multi-purpose tray with the
print side face up.

2-11

Precautions when Loading Paper

Paper Loading Capacity

CAUTION
Be careful when handling paper
Handle paper carefully not to cut your hands with the edges
of the paper.
Precautions when inserting the paper cassette
Be careful not to catch your fingers.

(A)
Document and Paper Handling

IMPORTANT
Be sure to align the paper guides with the width of the
paper.
• If the paper guides are too loose or too tight, this may result in
misfeeds or paper jams.
• Printouts may be askew depending on the printing environment.
Properly load paper to reduce the symptom.

When using paper that has been poorly cut
If you use paper that has been poorly cut, multiple sheets of paper
may be fed at once. In this case, fan the paper thoroughly, and then
align the edges of the stack properly on a hard, flat surface.

Do not exceed the load limit mark when loading paper.
Ensure that the paper stack does not exceed the line of the load
limit mark. If the paper stack exceeds the load limit mark lines, this
may result in misfeeds.

When printing on envelopes
Load envelopes with the front side (non-glued side) facing up. You
cannot print on the reverse side of envelopes.
Also, be sure to close the flap before loading envelopes.

NOTE
Detailed information about usable paper
“Paper Requirements” (→P.2-6)

Size abbreviation on the paper guides of the paper
cassette
Paper size

2-12

Paper guide

Legal

LGL

Letter

LTR

Executive

EXEC

(B)

Paper source
(A)
Multi-purpose
tray

(B)
Paper cassette

Plain paper (Ex. 21 lb
Bond (80 g/m²))

1 sheet

Approx. 250 sheets

Heavy paper (Ex. 25
lb Bond (91 g/m²))

1 sheet

Approx. 170 sheets

Heavy paper (Ex. 34
lb Bond (128 g/m²))

1 sheet

Approx. 100 sheets

Transparency

1 sheet

Approx. 50 sheets

Label

1 sheet

Approx. 100 sheets

1 envelope

Approx. 20
envelopes

Paper type

Envelope

Paper Loading Orientation

Printing on Envelopes

NOTE

Load envelopes with the front side (non-glued side) facing
up as follows.
(
: Feeding direction)

Paper loading orientation when loading in the multipurpose tray
Paper loading orientation for the multi-purpose tray is same as
which for the paper cassette.

When printing paper with a letterhead or logo
(previously printed paper)

Envelope, No.10, DL, ISO-C5
Load the envelopes so that the flap is toward the left of the
paper cassette when they are viewed from the front.

Close the flap and
load the envelope.

Portrait layout

Landscape layout

Envelope ISO-B5
Load the envelopes so that the flap is toward the back of
the paper cassette when they are viewed from the front.

1-sided
printing *1
(with the printed side
face up)

(with the printed side
face up)

(with the printed side
face down)

(with the front side
face down)

Document and Paper Handling

Load the paper as shown below.
(
: Feeding direction)

Close the flap and
load the envelope.

1-sided
printing *2

Automatic
2-sided
printing *3

When is set to
(the default setting)
“Selecting Print Side (MF4570dn Only)” (→P.2-16)
When is set to
“Selecting Print Side (MF4570dn Only)” (→P.2-16)
MF4570dn only

2-13

Setting a Paper Size and Type
Whenever you change the paper size and type loaded in the
cassette or tray, follow the procedure in this section to adjust
the paper size and type settings.

Setting a Custom Paper Size
To use custom paper, you must specify a paper size and type.

IMPORTANT
If the setting is different from the size of the loaded
paper

Keys to be used for this operation

Numeric keys

Paper Settings

An error message appears, or printing is not performed correctly.

Document and Paper Handling

Keys to be used for this operation

Paper Settings
OK

1
2

Press [

] (Paper Settings).

Press [ ] or [ ] to select a paper size, and then
press [OK].
“Paper Requirements” (→P.2-6)
* When registering the custom paper, see “Setting a Custom Paper
Size” (→P.2-14).

Paper Size
LTR
LGL
STMT
EXEC

Press [ ] or [ ] to select a paper type, and then
press [OK].
“Paper Requirements” (→P.2-6)

Paper Type
Plain (16 lb Bond-24
Plain L (16 lb Bond...
Recycled
Color

2-14

Press [
] (Paper Settings) to close
screen.

Press [

] (Paper Settings).

Press [ ] or [ ] to select or
, and then press [OK].
Paper Settings
MP Tray
1 Drawer 1

1
2

Press [ ] or [ ] to select , and
then press [OK].
Paper Size
A4
A5
B5
Custom Size

Specifies the size of direction and
direction.
(1) Press [

] or [

] to select the direction, and then press [OK].

Specify Size

X
X: 0"
Y Y: 0"
(2) Press [ ] or [ ] to specify the size, and then press [OK].
You can also enter values using the numeric keys.

(3-8_1/2)
(3) Press [

] or [

] to select , and then press [OK].

Specify Size

X
X: 3"
Y Y: 8_1/4"

Document and Paper Handling

Set Length for X

Press [ ] or [ ] to select a paper type, and then
press [OK].
Paper Type
Plain (16 lb Bond-24
Plain L (16 lb Bond...
Recycled
Color

Press [
] (Paper Settings) to close screen.

2-15

Selecting Print Side (MF4570dn Only)
You can specify whether to match the sides to be printed for
2-sided printing and 1-sided printing.
Depending on the setting for this item, the side to be printed
changes. When using previously printed paper, read “Paper
Loading Orientation” (→P.2-13) thoroughly to load the paper in
the proper orientation.

1
2

Document and Paper Handling

2-sided
printing

1
1

2
3

Specify the setting in the following cases.
• When not using previously printed paper
• When performing only 1-sided printing on previously
printed paper

Press [ ] or [ ] to select , and
then press [OK].

Press [ ] or [ ] to select , and then press [OK].
Preferences
Sound Volume Control
Display Settings
Toner Saver Mode
Paper Feed Method Swi

Front Back
1-sided
printing

] (Menu).

Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings

When setting this item to (the default setting)
Because the sides to be printed for 2-sided printing and
1-sided printing are different, the printing sides do not match.
* When using previously printed paper, you need to switch
the sides of loaded paper between 2-sided printing and
1-sided printing.

Press [

Press [ ] or [ ] to select a paper source, and
then press [OK].
Paper Feed Method
Multi-Purpose Tray
Drawer 1

When setting this item to
The sides to be printed for 2-sided printing and 1-sided
printing match.
* Even when using previously printed paper, you do not
need to switch the sides of loaded paper between 2-sided
printing and 1-sided printing.
Front Back
1-sided
printing

2-sided
printing

2
2

Specify the setting in the following case.
• When performing 2-sided printing and 1-sided printing on
previously printed paper
Keys to be used for this operation

2-16

Press [ ] or [ ] to select
or , and then press [OK].
Multi-Purpose Tray
Print Speed Priority
Print Side Priority

When specifying , load paper
as follows.
: Feeding direction)
(
* For details on the procedure for loading paper
when printing pages of the landscape layout, see
“Paper Loading Orientation” (→P.2-13).

When performing
1-sided printing

When performing
2-sided printing

Load paper with the
printed side face up.

Load paper with the
front side (first page)
face down.

Press [
screen.

The procedure for loading paper is the same
for 2-sided printing and 1-sided printing.
• When performing 1-sided printing, load
paper with the printed side face down.
• When performing 2-sided printing, load
paper with the front side (first page) face
down.

Document and Paper Handling

When specifying , load paper as
follows.
: Feeding direction)
(
* For details on the procedure for loading paper
when printing pages of the landscape layout, see
“Paper Loading Orientation” (→P.2-13).

] (Menu) to close the menu

2-17

Document and Paper Handling

2-18

Chapter

Copying
This category describes the copying features.

Basic Copying Method
Checking and Canceling Copy Jobs
Canceling using the Stop Key

3-2
3-3
3-3

Checking and Canceling using the Status
Monitor/Cancel Key

Copy Settings

3-3

3-4

Adjusting the Density

3-4

Selecting Image Quality (Copy)

3-4

2-Sided Copying (MF4570dn Only)

3-5

Enlarging/Reducing Copies

3-6

Multiple Documents onto One Sheet (N on 1)

3-6

Collating Copies

3-7

Emphasize the Outline of an Image (Sharpness)

3-7

Copying an ID Card

3-8

Changing the Default Values

3-9

3-1

Basic Copying Method
This section describes the basic procedure for copying.

Copying

Place documents.
“Placing Documents” (→P.2-4)
“Document Requirements ” (→P.2-2)
* A maximum of 35 pages can be loaded into the feeder.

Press [

* Press [

Specify the copy settings as needed.
You can specify up to 7 items.
(for details, see P.3-3 to P.3-6.)

Density
Image quality
2-Sided (MF4570dn only)
Enlarged/reduced

Reduced layout
Collating
Sharpness

The settings that are specified here apply only to
copy operation which you are currently performing.
To apply the valid settings for all copy operations, see
“Changing the Default Values” (→P.3-9).

3-2

Use numeric keys to enter the desired copy
quantity (1 to 99).
] (Clear) to delete a number.

Press [

] (Start).

Checking and Canceling Copy Jobs
You can check detailed information about copy jobs. Also, you
can cancel copy jobs while the jobs are in process.

● For canceling
(1) Press [ ] or [
[OK].

Copy Job Status

Job Number: 0001
Status: Copying
Time: 01/01 12:52 AM

NOTE
If the processing/Data indicator on the operation panel
is:
Turned on/blinking

A job is being processed.

Turned off

No jobs are in the memory.

] to select , and then press

(2)

Press [

] or [

] to select , and then press [OK].

The copy job is canceled.

Cancel?

Canceling using the Stop Key
Press [

Yes

] (Stop).

* If only one job is processing or waiting, you can stop the job by
pressing [
] (Stop) twice.

2
3

When multiple jobs are being processed, press
[ ] or [ ] to select a job to be canceled, and then
press [OK].

(3)

Press [
screen.

No
] (Status Monitor/Cancel) to close the

Copying

● For checking only
] (Status Monitor/Cancel) to close the screen.
Press [

When appears, press [ ] or [ ] to
select , and then press [OK].
You can cancel the print job also by pressing [
The copy job is canceled.

] (Stop).

Cancel?

Details
* To check the job before canceling, press [
, and then press [OK].

] or [

] to select

Checking and Canceling using the Status
Monitor/Cancel Key

1
2

Press [

] (Status Monitor/Cancel).

Press [ ] or [ ] to select , and
then press [OK].
Status Monitor/Cancel
Device Status
Copy Job Status
Fax Job Status/Hist...
Print Job Status
The detailed information is displayed.

Copy Job Status

Job Number: 0001
Status: Copying
Time: 01/01 12:52 AM

3-3

Copy Settings
Adjusting the Density
Copy mode screen

Setting screen

Copy: Press Start
100% 1
LTR
Density: +
-0
Original Type: Text...
2-Sided: Off

Press [ ] or [

] to select

Density
Auto Density
Manual Density
-

Press [ ] or [ ] to adjust the
density → [OK]

[

]

Makes the copy density lighter.

[

]

Makes the copy density darker.

Copying

* Select to copy with the density that is suitable for the
document. If other than is set as , will
be changed to when you select .
* You can adjust by pressing [ ] or [ ], when either of
or is selected.

Selecting Image Quality (Copy)
Copy mode screen

Setting screen

Copy: Press Start
100% 1
LTR
Density: +
-0
Original Type: Text/
2-Sided: Off

Press [
Type>

] or [

] to select

This setting is suitable for documents that contain text without photos or illustrations.

This setting is suitable for documents that contain text and photos. This setting scans the document at a low
resolution.
This setting scans the document at a low resolution.

This setting is suitable for documents that contain text and photos.

This setting is suitable for the documents that contain photos printed in a magazine.

* If is set to , will be changed to when you select ,
, .

3-4

Copy Settings
2-Sided Copying (MF4570dn Only)
Copy mode screen

Setting screen

2-Sided
Off
1 2-Sided
Format Settings

Copy: Press Start
100% 1
LTR
Density: +
-0
Original Type: Text...
2-Sided: Off

Press [ ] or [
<2-Sided>

] to select

Press [

] or [

] to select <1→2-Sided> → [OK]

(1)

Press [ ] or [
→ [OK]

] to select

(3)

2-Sided
Off
1 2-Sided
Format Settings

(2)

Press [ ] or [
→ [OK]

Press [ ] or [ ] to select the orientation of
the document → [OK]

Copying

If you want to specify 2-Sided copying format

Original Orientation
Portrait
Landscape

] to select <1 → 2-Sided>

(4)

Format Settings
1 2-Sided

Press [ ] or [ ] to select the finishing
format → [OK]

Finishing Format
Book Type
Calendar Type

If you place documents on the platen glass
(1)

Place the next document, and the press [
(Start).

]

(2)

Press [ ] or [ ] to select ,
and then press [OK].

* Repeat the procedure until all documents are scanned.

Scan Next: Press Start

SheetxCopy:001x01
Density: +
-0

To next page
3-5

Copy Settings
Enlarging/Reducing Copies
Copy mode screen

Copy: Press Start
100% 1
LTR
Original Type: Text...
2-Sided: Off
Copy Ratio: 100% Dir

Copy Ratio
Custom Ratio
100% Direct
400% Max
200%

Press [
Ratio>

] or [

For the preset zoom, you can select
from the following setting values.
• 100% Direct
• 50%
• 400% Max
• 25% Min
• 200%
• 129% STMT → LTR
• 78% LGL → LTR
• 64% LTR → STMT

Setting screen

] to select

(2)

Press [ ] or [ ] to specify the ratio → [OK]
You can also enter the copy ratio using the numeric keys.

Copy Ratio
Custom Ratio
100% Direct
400% Max
200%

Custom Ratio
100

(25-400)

Multiple Documents onto One Sheet (N on 1)
Copy mode screen

Setting screen

Copy: Press Start
100% 1
LTR
2-Sided: Off
Copy Ratio: 100% Di...
N on 1: Off

N on 1
Off
2 on 1
4 on 1
ID Card Copy

About margins among
documents
When you copy in an N
on 1 layout, margins are
created among the reduced
documents.

Press [

] or [

] to select

Press [ ] or [ ] to select
<2 on 1> or <4 on 1>

Scan Size
LTR
LGL
STMT
When specifying the layout
Press [ ] or [ ] to select the size of the
original document → [OK]
<2 on 1>

Reduce two-page documents to fit
on one sheet of paper.

<4 on 1>

Reduce four-page documents to fit
on one sheet of paper.

(1)

Press [

] or [

] select
Settings
(Bold: Default settings)
Off
On

NOTE

No alarm will sound.
Off-Hook Alarm Volume:
1 to 5

An alarm will sound at the
specified volume.

How to use a username
When you send a document, the sender information that you
registered is printed on the recipient’s paper.
Fax/Telephone Number
(FAX No.) Sender Name
Sending Date/Time
01/01/2011 02:07 PM FAX

123XXXXXXX

(Unit Name)

Page Number

CANON

P.0001

Telephone Number
Mark

Sender ID
You can specify whether the sender ID is added to a
document to be sent.
The sender ID is printed on the top of the sent document.
Information such as your fax number and name is printed,
enabling the recipient to know who sent the document.
How to display the settings
[
] (Menu) → → →
Settings
(Bold: Default settings)

Using the Fax Functions

How to display the settings
[
] (Menu) → →
→

Off

No sender ID is added.
Print Location:
Select the location where the
On Image, Above Image sender ID is printed.
Mark No. as TEL/FAX:
FAX, TEL

Select a character to be added
in front of a telephone number.

Settings
You can enter numbers with the numeric keys (up to 20
characters).

Change Defaults

Select Line Type

You can change the settings for when turning the power
ON or pressing [
] (Reset).

If you cannot send a fax, change this setting.
If you are not sure about your telephone line type, contact
your local telephone company.

How to display the settings
[
] (Menu) → → →

How to display the settings
[
] (Menu) → →
→
Settings
(Bold: Default settings)
UnitedStates (US), Canada (CA),
Brazil (BR), Mexico (MX), Other

Address Book PIN

Fax No. Confirmation Re-Entry

Specify a PIN to protect the address book. The PIN will be
required to register, edit, or delete destinations.

Specify whether or not to require a confirmation before
sending a fax. If you activate this feature, you must re-enter
the fax number before the fax will be sent.

How to display the settings
[
] (Menu) → →
→
Settings
Enter a 7-digit number.
To cancel the PIN option, clear any numbers entered and
press [OK].

Restrict New Destinations
Restrict the destinations that can be specified to preregistered one-touch keys or coded dial codes.
Restricting destinations will prevent the following
operations.
• Specifying a destination with the numeric keys
• Registering new destinations to the address book, onetouch keys, coded dial codes
• Changing destinations that are registered to the address
book, one-touch keys, coded dial codes
How to display the settings
[
] (Menu) → →
→
Settings
(Bold: Default settings)
No restriction.

Performs restriction. Specifies destinations registered
under the one-touch keys and coded dial codes.

Allow Driver Faxing
Specify whether or not to allow faxes to be sent via a
computer’s fax driver.
How to display the settings
[
] (Menu) → →
→

Settings
(Bold: Default settings)
Off

Does not require confirmation.

Requires you to re-enter the fax number for confirmation.

Restrict Sequential Broadcast
Specify whether or not to restrict faxes to multiple
recipients.
How to display the settings
[
] (Menu) →
→ →
Settings
(Bold: Default settings)
Off

Allows you to send a fax to multiple
recipients.

Confirm
Sequential
Broadcast

Displays a confirmation screen when you
send a fax to multiple recipients.

Reject Sequential
Broadcast

Does not allow you to send a fax to multiple
recipients.

Using the Fax Functions

Off

How to display the settings
[
] (Menu) → →
→

Settings
(Bold: Default settings)
Off

Faxes cannot be sent by a computer’s fax driver.

Faxes can be sent from a computer’s fax driver.

Restrict Sending From History
Specify whether or not to restrict sending faxes from
history.
How to display the settings
[
] (Menu) →
→ →
Settings
(Bold: Default settings)
Off

Sending from a history is permitted.

Sending from a history is not permitted.

6-25

Canceling Fax Jobs
You can cancel fax jobs that are sending or receiving, or
waiting to be sent or received.

1
2

Press [

] (Stop).

* If only one job is processing or waiting to be sent or received,
you can stop the job by pressing [
] (Stop) twice.

When appears, Press [ ] or [
select , and then press [OK].
* You can also press [
] (Stop) to cancel the job.
Transmission or reception is canceled.

Using the Fax Functions

6-26

] to

Chapter

Using the Scan Functions
The documents scanned by the machine can be stored in a computer.
* If you are a Macintosh user, see the Scanner Driver Guide.
To view how to display the Scanner Driver Guide, see “For Macintosh Users” (→P.11-4).

Basic Operation Methods for Scanning

7-2

7-1

Basic Operation Methods for Scanning
You can scan a document using the keys on the operation
panel.

Press [ ] or [ ] to specify a destination, and then
press [OK].
• When multiple computers are connected
The computer connected by a USB cable is listed on the top.
• When a computer is connected by a USB cable
This screen is not displayed.
• If eleven or more computers are connected via a network
The eleventh and subsequent computers are not displayed (you
cannot scan). Reduce the number of computers connected to
this machine via a network.
e-Manual → Scan → Registering the Scanner in MF Network
Scan Utility (MF4570dn Only)

NOTE
To scan documents by operating a computer
See “Scan” in the e-Manual.

Keys to be used for this operation

SCAN

* You can change the names for the displayed computers.
e-Manual → Scan → Using the MF Toolbox

Specify destination.
EXAMPLE1
EXAMPLE2

Place documents.
“Placing Documents” (→P.2-4)
“Document Requirements ” (→P.2-2)

NOTE

Press [ ] or [ ] to specify the scanner settings
and then press [OK].

When scanning using the operation panel

The scanner settings are specified by default as follows.

You cannot scan multiple documents from the platen glass.

Using the Scan Functions

2
3

Press [

Press [ ] or [ ] to select , and then
press [OK].

Scan
Mode

Resolution

File
Type

Color Scan

Color

300 dpi

PDF

Searchable/
High

B&W Scan

Black and
White

300 dpi

TIFF

Custom 1

Color

300 dpi

JPEG/
Exif

Custom 2

Color

300 dpi

PDF

Searchable/
Standard

Select the scan type.
Computer
Remote Scanner

PDF
Settings

Select Scan Type
Scan: Press OK
Color Scan
B&W Scan
Custom 1
Scanning operation starts, and the scan mode screen reappears
after saving the data.

7-2

If you cannot scan
You cannot scan when the setting screen of the MF Toolbox is
displayed.
Click [ ] to close the setting screen before scanning.

Note
To change the scanner settings
You can change the settings for the location to save, the file format,
or the resolution from a computer.
e-Manual → Scan → Using the MF Toolbox

Using the Scan Functions

The location to save the scanned images
The folder where the images are saved opens automatically
after scanning.
By default, the folder for the date when you scanned the
data is created in the [Pictures] folder. (For Windows 2000/
XP, the folder is created in the [My Pictures] folder in [My
Documents].)

7-3

Using the Scan Functions

7-4

Chapter

Maintenance
This section describes the maintenance of this machine, replacement of the toner cartridges, and so on.

Cleaning the Machine

8-2

Cleaning the Exterior

8-2

Cleaning the Interior

8-2

Cleaning the Fixing Unit

8-3

Cleaning the Platen Glass

8-4

Cleaning the Feeder

8-4

Precautions When Cleaning the Machine

8-4

Replacing Toner Cartridges

8-6

When a Message Appears

8-6

When White Streaks Appear On the Printouts or Some Parts Are
Faded

8-6

About the Supplied Toner Cartridge

8-7

About Replacement Toner Cartridge

8-7

Handling Toner Cartridge

8-7

Checking the Toner Level

8-8

Using the Toner Saver Mode

8-8

Before Replacing the Toner Cartridge
Replacing the Toner Cartridge
Precautions when Replacing Toner Cartridge

Purchase Consumables

Recycling Used Cartridges

8-9
8-10
8-11

8-12

8-13

The Clean Earth Campaign

8-13

U.S.A. PROGRAM

8-13

Packaging
Shipping

CANADA PROGRAM-CANADA PROGRAMME

Transporting the Machine
Precautions when Transporting the Machine

8-13
8-14

8-15

8-16
8-17

8-1

Cleaning the Machine
Cleaning the Exterior

Lift the scanning platform.

Clean the exterior of the machine and ventilation slots.

1
2

Turn OFF the power switch and disconnect the
power cord.
Clean the exterior of the machine with a soft, well
wrung out cloth dampened with water or mild
detergent diluted with water.

If you cannot lift the scanning platform

Ensure that the feeder is completely closed.
Do not try to forcefully lift the scanning platform, as this may
damage the machine.
* If you set thick documents such as a book, the feeder may not
be completely closed. Remove the documents.

Wait for the printer to dry completely before
reconnecting the power cord, and then turn ON
the power.

Cleaning the Interior

Hold the grip on the left front side of the toner
cover.

Clean the machine’s print area periodically to prevent toner
powder and paper dust from accumulating inside.

Maintenance

1
2

Turn OFF the power switch and disconnect the
power cord.
Hold the operation panel.

8-2

Open the toner cover.

Remove the toner cartridge.

Cleaning the Fixing Unit
In the following cases, the fixing unit may be dirty. Clean the
fixing unit.
• When black streaks appear on the printed paper
• When a toner cartridge is replaced
Keys to be used for this operation

7
8

Remove any toner or paper debris from interior of
the machine, with a clean, soft, dry, and lint-free
cloth.

1
2

Press [

] (Menu).

Press [ ] or [ ] to select , and then press [OK].

Insert the toner cartridge.
Menu
Copy Settings
Fax TX Settings
Fax RX Settings
Adjustment/Maintenan

Fit the protrusions (A) on each side of the toner cartridge into the
guides located on each side of the machine, and then slide the
toner cartridge into the machine until the toner cartridge meets
the back of the machine.
(A)
(A)

Press [ ] or [ ] to select ,
and then press [OK].

4
9

Close the toner cover.

Maintenance

Adjustment/Maintenance
Special Processing
Clean Fixing Unit

Load Letter size plain paper in the multi-purpose
tray, and then press [OK].
The cleaning process will start. Cleaning takes approximately 90
seconds.

If you cannot close the toner cover

Clean Fixing Unit
Load paper larger than
A4/LTR in MP Tray.
Start

Ensure that the toner cartridge is properly set in the machine.
Do not try to forcefully close the toner cover, as this may damage
the machine.

10 Lower the scanning platform.
11 Connect the power cord and turn ON the power

* It is recommended that you use plain paper to clean the fixing
unit.

switch.
If cleaning does not begin
When there are jobs stored in memory, this function is not
available.

Press [
screen.

] (Menu) to close the menu

8-3

Cleaning the Platen Glass
Follow this procedure to clean the platen glass and under
surface of the feeder.

1
2

Turn OFF the power switch and disconnect the
power cord.
Open the feeder.

Clean the platen glass and the under surface of
the feeder.
(1) Clean the areas with a cloth dampened with water.
(2) Wipe the areas with a soft, dry cloth.

Cleaning the Feeder
If your documents have black streaks or appear dirty after
scanning using the feeder, the roller inside the feeder may be
dirty. Clean the feeder scanning area and roller.

1
2

Turn OFF the power switch and disconnect the
power cord.
Open the feeder cover.

Clean the rollers (A) inside the feeder with a well
wrung out cloth dampened with water, and then
wipe the area with a soft, dry cloth.

(A)

Maintenance

4
5

Close the feeder.
Connect the power cord and turn ON the power
switch.

4
5

Close the feeder cover.
Connect the power cord and turn ON the power
switch.
Precautions When Cleaning the Machine
Before cleaning the machine, check the following.
• Ensure no jobs are stored in memory, then turn OFF the
power switch and disconnect the power cord.
• Use a soft cloth to avoid scratching the components.
• Do not use tissue paper, paper towels, or similar materials
for cleaning. They can stick to the components or
generate static charges.

8-4

CAUTION
Precautions when cleaning the feeder
Do not dampen the cloth too much, as this may tear the
document or damage the machine.
Precautions when closing the feeder
Be careful not to get your fingers caught.
Do not touch the fixing unit (A).
Touching the fixing unit (A) may cause burns as it becomes
very hot during use.

(A)

Precautions if you get toner on your hands or clothing
If toner gets on your hands or clothing, wash them
immediately with cold water.
Washing with warm water sets the toner, making it
impossible to remove the toner stains.

IMPORTANT
Do not touch the transfer roller (A).
Touching the transfer roller (A) may damage the machine.

Maintenance

(A)

NOTE
Sending or receiving faxes
When the power plug is unplugged, the machine cannot send or
receive faxes.

If there is data waiting to be printed
The data is deleted when you turn OFF the power switch.

Data received in memory, reserved sending data, etc.
They can be kept for approximately 5 minutes after the power plug
is unplugged. To view jobs stored in memory, see the following.
“Checking and Managing Fax Documents in Memory” (→P.6-15)

8-5

Replacing Toner Cartridges
Toner cartridges are consumable products. When the toner has
almost or completely run out in the middle of operating this
machine, a message appears in the display, or the symptoms
described below appears. Follow a proper resolution
depending on the message or symptom.
● A message appears in the display
“When a Message Appears” (→P.8-6)
● White streaks appear on the printouts or some parts
are faded
“When White Streaks Appear On the Printouts or Some
Parts Are Faded” (→P.8-6)

IMPORTANT
White streaks appear or some parts are faded
If white streaks appear on the printouts or some parts are faded,
the toner cartridge has almost reached the end of its life, even if no
messages appear on the screen. If print quality declines, refer to the
following to resolve the problem.
“When White Streaks Appear On the Printouts or Some Parts Are
Faded” (→P.8-6)

When White Streaks Appear On the
Printouts or Some Parts Are Faded

IMPORTANT
About toner cartridges
For details on the toner cartridge yields and the procedures for
handling toner cartridges and checking the toner level, see the
following.
About the Supplied Toner Cartridge (→P.8-7 )
About Replacement Toner Cartridge (→P.8-7 )
Handling Toner Cartridge (→P.8-7 )
Checking the Toner Level (→P.8-8 )
Using the Toner Saver Mode (→P.8-8 )
Purchase Consumables (→P.8-12 )
* The yields of the toner cartridges included in this machine differ
from those of replacement toner cartridges.

Maintenance

When a Message Appears

* No message appears on the display even if the toner almost runs
out. Replace the toner cartridge when white streaks appear on
the printouts or some parts of the printout are faded.

If the above symptoms appear

When the toner becomes nearly out in the middle of operating
this machine, a message appears in the display.
Message

When It Is
Displayed

When
a toner
cartridge
soon needs
to be
replaced.

Redistribute the toner.
“Before Replacing the Toner Cartridge“
(→P.8-9)
It is recommended that you replace the
toner cartridge before printing a large
amount of data.
“Replacing the Toner Cartridge“
(→P.8-10)

When
a toner
cartridge
has reached
the end of
its life.

Redistribute the toner.
“Before Replacing the Toner Cartridge“
(→P.8-9)
If this message does not disappear, replace
the toner cartridge.
“Replacing the Toner Cartridge“
(→P.8-10)
If this message is displayed, the incoming
fax will be stored in the memory without
being printed. Also, reports may not be
printed, even if they are set to be printed
automatically.
If
in is set to ,
however, printing will be continued, but
white streaks or smudges may appear on
printouts.
e-Manual → Basic Operation → Setting
the Report to Print Automatically
“Continue Print. When Toner Is Nearly
Out“ (→P.6-22)

8-6

If the toner almost runs out, white streaks appear on the
printouts or some parts are faded.

Description and Solutions

Follow the procedure in the section below before replacing
the toner cartridge. You may print for some
time, until the toner completely runs out.
“Before Replacing the Toner Cartridge“ (→P.8-9)
If print result is not improved

If white streaks or faded parts continue to appear after
following the procedure in the section above, replace the
toner cartridge.
“Replacing the Toner Cartridge“ (→P.8-10)

About the Supplied Toner Cartridge
CAUTION
The average yield of the included toner cartridge is as follows.
Canon Cartridge
128 Starter
*1

Average yield*1: 1,000 sheets

The average yield is on the basis of “ISO/IEC 19752”*2 when printing
A4 size paper with the default print density setting.
“ISO/IEC 19752” is the global standard related to “Method for
the determination of toner cartridge yield for monochromatic
electrophotographic printers and multi-function devices that
contain printer components” issued by ISO (International
Organization for Standardization).

The average yield of the replacement toner cartridge is
different from which of the supplied toner cartridge.

About Replacement Toner Cartridge
Purchase the toner cartridge at your local authorized Canon
dealer.
Replace the toner cartridge according to the description in the
following charts. However, you may need to replace the toner
cartridge earlier than the described life time depending on
installation environment of the machine, the printing paper
size, or the document type.
Toner cartridge
Canon Cartridge 128
*1

Average yield*1 : 2,100 sheets

The average yield is on the basis of “ISO/IEC 19752” when printing
A4 size paper with the default print density setting.
“ISO/IEC 19752” is the global standard related to “Method for
the determination of toner cartridge yield for monochromatic
electrophotographic printers and multi-function devices that
contain printer components” issued by ISO (International
Organization for Standardization).

When removing a toner cartridge
Ensure to remove it carefully. If not removed with care, the
toner powder may scatter and come in contact with your
eyes and mouth. If toner gets into your eyes or mouth, wash
them immediately with cold water and consult a physician.
Keep the toner cartridge away from small children.
If the toner or other parts are ingested, consult a physician
immediately.
Do not disassemble the toner cartridge.
The toner may scatter and get into your eyes or mouth. If
toner gets into your eyes or mouth, wash them immediately
with cold water and consult a physician.

For optimum print quality, replacing the toner cartridge with
Canon genuine ones is recommended.

Supported Canon genuine toner cartridge
Canon Cartridge 128

Handling Toner Cartridge
Note the following when handling the toner cartridge.

Maintenance

IMPORTANT
About Replacement Toner Cartridge

Model name

If toner leaks from the toner cartridge
Be careful not to inhale the toner or allow it to come into
direct contact with your skin. If the toner comes into contact
with your skin, wash with soap. If the skin becomes irritated
or you inhale the toner, consult a physician immediately.

Target for replacing toner cartridge
*2

MF4570dn
MF4450

Do not place the toner cartridge in fire.
This may cause toner remaining inside the cartridge to ignite
and result in burns.

Be careful of counterfeit toner cartridges.
Please be aware that there are counterfeit Canon toner cartridges
in the marketplace.
Use of counterfeit toner cartridges may result in poor print quality
or machine performance.
Canon is not responsible for any malfunction, accident or damage
caused by the use of counterfeit toner cartridge.
For more information, see http://www.canon.com/counterfeit.

8-7

Checking the Toner Level

Using the Toner Saver Mode
Set whether or not to conserve toner when copying or faxing.

Keys to be used for this operation

Status Monitor/Cancel

NOTE
If you want to conserve toner when printing
Set to use [Toner Save] on the [Quality] tab of the printer driver.
e-Manual → Print → Printing Functions → [Quality] Sheet

1
2

Press [

] (Status Monitor/Cancel).

Press [ ] or [ ] to select , and
then press[OK].
Status Monitor/Cancel
Device Status
Copy Job Status
Fax Job Status/Hist...
Print Job Status

Keys to be used for this operation

1
2

Press [ ] or [ ] to select , and
then press[OK].
Device
Paper
Toner
Check

] (Menu).

Press [ ] or [ ] to select , and
then press [OK].
Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings

Status
Information
Gauge
Counter

Maintenance

The toner level is displayed.

Press [

Toner Gauge
OK

Press [ ] or [ ] to select ,
and then press [OK].
Preferences
Sound Volume Control
Display Settings
Toner Saver Mode
Paper Feed Method Sw...

NOTE
Displaying the toner level
The toner level is displayed in three stages.
•
•
The message appears in the display.
•
The message appears in the display.
For details on solution, see the following.
e-Manual → Troubleshooting → Display Messages

Press [
] (Status Monitor/Cancel) to close
screen.

Press [ ] or [ ] to apply the toner saver mode to
an operation, and then press [OK].
Toner Saver Mode
Copy
Fax

Press [ ] or [ ] to select or , and
then press [OK].
Copy
Off
On

8-8

Do not use the toner saver mode.

Use the toner saver mode.

Hold the grip on the left front side of the toner
cover.

NOTE
When the is set to
You may conserve toner, however, the output may be less clear and
thin lines or light colors may be printed unclearly.

Press [
mode.

] (Menu) to return to standby

Before Replacing the Toner Cartridge
Before replacing the toner cartridge, see “Replacing the Toner
Cartridge” (→P.8-10)

Open the toner cover.

Remove the toner cartridge.

If the toner almost runs out, follow the procedure below
before replacing the toner cartridge. You may print for some
time, until the toner is completely run out.

Maintenance

Hold the operation panel.

Lift the scanning platform.

Gently shake the toner cartridge five or six times
to evenly distribute the toner.

If you cannot lift the scanning platform
Ensure that the feeder is completely closed.
Do not try to forcefully lift the scanning platform, as this may
damage the machine.
* If you set thick documents such as a book, the feeder may not be
completely closed. Remove the documents.

8-9

Insert the toner cartridge.

Lift the scanning platform.

If you cannot lift the scanning platform

Close the toner cover.

If you cannot close the toner cover
Ensure that the toner cartridge is properly set in the machine.
Do not try to forcefully close the toner cover, as this may damage
the machine.

Hold the grip on the left front side of the toner
cover.

Lower the scanning platform.

Replacing the Toner Cartridge
Maintenance

Before replacing toner cartridges, see “Precautions when
Replacing Toner Cartridge” (→P.8-11)

NOTE
Checking the toner cartridge status
You can check the level of remain toner on the operation panel.
“Checking the Toner Level” (→P.8-8)

8-10

Hold the operation panel.

Open the toner cover.

Remove the toner cartridge.

Insert the toner cartridge.
Fit the protrusions (A) on each side of the toner cartridge into the
guides located on each side of the machine,and then slide the
toner cartridge into the machine until the toner cartridge meets
the back of the machine.
(A)
(A)

Take out the new toner cartridge from the
protective bag.
You can open the protective bag with your hands from the notch.

10 Close the toner cover.
If you cannot close the toner cover
Ensure that the toner cartridge is properly set in the machine.
Do not try to forcefully close the toner cover, as this may damage
the machine.

Gently shake the toner cartridge five or six times
to evenly distribute the toner.

11 Lower the scanning platform.
Precautions when Replacing Toner Cartridge
See “Maintenance and Inspections” (→P.ix) in “Important
Safety Instructions” as well.

Do not dispose of a used toner cartridge in open
flames

Place the toner cartridge on a flat surface, lift the
tab, and gently pull the sealing tape completely
out.

Maintenance

WARNING

This may cause the toner remaining inside the cartridges
to ignite, resulting in burns or fire.

The full length of the sealing tape is approximately 20” (50 cm).

CAUTION
Precautions if you get toner on your hands or
clothing
If toner gets on your hands or clothing, wash them
immediately with cold water.
Washing with warm water sets the toner, making it
impossible to remove the toner stains.
(2)

(1)

Be careful not to allow the toner to scatter
Do not pull out the sealing tape forcefully or stop at
midpoint, as this may cause toner to spill out.
If toner gets into your eyes or mouth, wash them
immediately with cold water and consult a physician.
Precautions when lowering the scanning platform
Be careful not to catch your fingers.

8-11

When pulling out the sealing tape

IMPORTANT
About replacement toner cartridge

• Do not pull the sealing tape diagonally or sideways. If the tape
breaks, this may become difficult to pull out completely.

For optimum print quality, replacement is recommended using
genuine Canon toner cartridge.

Model name
MF4570dn
MF4450

Supported Canon genuine toner
cartridge
Canon Cartridge 128

Shake the toner cartridge before setting
If toner is not distributed evenly, this may result in a deterioration in
print quality.

Hold the toner cartridge properly
When handling the toner cartridge, hold them properly as shown
in the figure. Do not place them vertically or upside-down.

• Even if the sealing tape stops at midpoint, pull it out of the toner
cartridge completely.
• If any tape remains in the toner cartridge, this may result in poor
print quality.

Disposing of the removed sealing tape
Dispose of the sealing tape according to local regulations.

Keep the protective bag
Keep the protective bag for the toner cartridge. You will need them
when you remove the toner cartridge for machine maintenance or
other purposes.

Do not touch the high-voltage contacts (A)
This may result in damage to the machine.

Do not touch the toner cartridge memory (A) or the
electrical contacts (B)
This may result in damage to the cartridge.

(A)

Maintenance

Do not leave the toner cover open for a long time with
the toner cartridge installed.
This may result in a deterioration in print quality.
(A)
(B)

NOTE
About the packing materials

Do not open the drum protective shutter (A).
Print quality may deteriorate if you touch or damage the drum
inside of the drum protective shutter (A). Do not touch or open the
drum protective shutter (A).

The packing materials may be changed in form or placement, or
may be added or removed without notice.

When the message appears when
receiving a fax
Printing of the fax is interrupted and the received data will be
stored in the memory.

If is set to

(A)

You can keep printing fax documents or reports without replacing
a toner cartridge. However, the printed documents may be light
or blurred because of lack of toner. The data is erased when
the documents are printed out, so you cannot print the same
documents again.
“Continue Print. When Toner Is Nearly Out” (→P.6-22)

Collecting used toner cartridges
“Recycling Used Cartridges” (→P.8-13)

Purchase Consumables
Purchase at your local authorized Canon dealer.
If you are not sure, contact the Canon help line.

8-12

Recycling Used Cartridges
Canon has instituted a worldwide recycling program for cartridges called “The Clean Earth Campaign”.
This program preserves precious natural resources by utilizing a variety of materials found in the used
cartridges
that are of no further use, to remanufacture new cartridges which, at the same time, keeps the
environment cleaner by reducing landfill waste.
Complete details concerning this program are enclosed in each Cartridge box.

The Clean Earth Campaign
● THE Canon CARTRIDGE RECYCLING PROGRAM
The Canon Cartridge Recycling Program fulfills the first initiative of Canon’s Clean Earth Campaign, which
supports four critical environmental areas:
• Recycling in the Workplace
• Conserving Environmental Resources
• Scientific Research and Education
• Encouraging Outdoors Appreciation
The remaining “Clean Earth” initiatives are supported in the U.S. through sponsorships of the National Park Foundation, the National
Wildlife Federation, and The Nature Conservancy and in Canada through donations to the World Wildlife Fund Canada and The
Nature Conservancy of Canada.

Maintenance

Since its inception, The Canon Cartridge Recycling Program has collected huge amount of cartridges that otherwise would have
been discarded into landfills or similar facilities.
Instead, this rapidly growing program returns used cartridges to the manufacturing process, thus conserving an array of resources.
Becoming a part of this worthwhile program is easy. When your cartridge is of no further use, simply follow the instructions
detailed for U.S. or Canadian residents.
We appreciate your support of The Canon Cartridge Recycling Program.
Working together we can make a significant contribution to a cleaner planet.
• Cartridges collected through this program are not refilled.
• You are not entitled to a tax deduction or rebate for the return of empty cartridges.
• This program may be modified or discontinued without notice.

U.S.A. PROGRAM
Packaging
● Option A-1: Single Box Return
• Repackage the empty cartridge utilizing the wrapper and pulp mould end-blocks from the new cartridge’s box.
• Place the empty cartridge in the box of your new cartridge. Seal the box.

8-13

● Option B: Volume Box Return
We encourage you to use this option as a more efficient way to ship cartridges.
• Place as many cartridges as possible into one box.
Carefully seal the box with tape;
or
• Call 1-800-OK-Canon to receive your free eight cartridge collection box.

● Option A-2: Multiple Box Return
We encourage you to use this option as a more efficient way to ship cartridges.
• Complete Option A-1.
• Bundle multiple cartridge boxes together securely with tape.

Please be sure that the shipment does not exceed UPS specifications.
Maximum weight = 70 lb. (31.8 kg)
Maximum length = 108” (2,743 mm)
Maximum girth (length + 2 x width + 2 x height) = 130” (3,302 mm)
If your shipment exceeds the above limits, please call 1-800-OK-Canon for special shipping information.

Maintenance

Please Note:
Do not send defective cartridges for replacement.
Defective cartridges under warranty should be exchanged by an authorized dealer or service facility as provided in the
warranty.

Shipping
Apply the UPS authorized returning label provided in this guide.
Residents of Alaska and Hawaii: Do not use the UPS authorized returning label. For Alaska and Hawaii Canon set up alternative
mail service with the U.S. Postal Service.
Please call 1-800-OK-Canon to receive U.S. Postal Service merchandise returning label.
• Give the shipment to your UPS driver when you receive your next regular delivery; (UPS may charge a fee for customers who
call UPS to pick up a cartridge shipment if they do not already have a delivery scheduled.)
or
• Take the shipment to your local UPS receiving point.

8-14

CANADA PROGRAM-CANADA PROGRAMME
● Option A: Single Box Return
• Repackage the empty cartridge utilizing the wrapper and pulp mould end-blocks from the new cartridge’s box.
• Place the empty cartridge in the box of your new cartridge. Seal the box.
• Apply the Canon Canada Inc./Canada Post label provided in this brochure. Canon’s labels are specially marked so that Canon
pays the postage.
• Deposit your empty cartridge in any full size street mailbox or take it to your local Canada Post outlet or franchise.

● Option B: Volume Box Return (eight or more cartridges)
We encourage you to use this option as a more efficient way to ship cartridges.
• Call 1-800-667-2666 to receive your free Canon collection box kit.
• The collection box can accommodate eight individual cartridge boxes.
• Place your eight individually packaged boxes of empty cartridges into the Canon collection box. Seal the box.
• Apply the Canon Canada Inc./Canada Post label provided in this brochure.
• Canon’s labels are specially marked so that Canon pays the postage.
• Deliver to any local Canada Post outlet or franchise. Customers who hold a Commercial pick-up agreement with Canada Post
may have their collection box picked up.

Maintenance

Working to preserve endangered species is a long-standing Canon interest.
To this end, for every cartridge collected, Canon Canada donates $1, shared equally between World Wildlife Fund Canada and the
Nature Conservancy of Canada. This donation is utilized in Canada.
• For further information about The Clean Earth Campaign in Canada, please call or write to Canon.
1-800-667-2666
Canon Canada Inc.
Corporate Customer Relations
6390 Dixie Road
Mississauga, ON L5T 1P7

8-15

Transporting the Machine
Before transporting the machine, see “Precautions when
Transporting the Machine” (→P.8-17)
When changing the location of the machine or moving the
machine for maintenance, be sure to perform the following
procedure.

Turn OFF the machine and any connected
computer.

NOTE
If documents are set in the document feeder tray
Remove all documents from the document feeder tray.

Fold the paper stopper, and then push the output
tray extension into the machine.

(1)
(1)

OFF

(2)
(2)

Disconnect all cables and the power cord from the
machine.

NOTE
If paper is in the output tray
Remove the paper from the output tray.

(3)

(1)

Lift the dust cover.

(2)

Maintenance

(4)

(5)

How to remove the cables and cord
USB cable*

(1) Remove it from the machine.

LAN cable*

(2) Remove it from the machine.

Power cord

(3) Unplug the power plug from the AC
power outlet.
(4) Remove it from the machine.

Telephone
cables*

(5) Remove it from the machine.

* Whether the cable is connected or not varies depending on
your environment.

8-16

Close the document feeder tray.

NOTE
If paper is set in the multi-purpose tray
Remove the paper from the multi-purpose tray.

Remove any paper from the paper cassette.

10 Carefully set the machine down on the new
installation site.
NOTE
When reinstalling the machine
Refer to the supplied Starter Guide.

When transporting the machine long distance

NOTE
If the paper guide at the front projects from the paper
cassette

To prevent damage to the machine during transportation,
refer to the following.
• Remove the toner cartridge.
• Securely pack the printer in its original box with the
original packing materials.
* If the original box and packing materials are not available,
find an appropriate box along with packing materials and
pack the machine and the parts appropriately.

Push the paper guide into the paper cassette.

7
8

Lower the dust cover.
Close the paper cassette.

Precautions when Transporting the
Machine
WARNING
When transporting the machine
Be sure to turn off the power switches of the machine
and your computer, and then unplug the power plug and
interface cables.
Failure to do so can damage the cables or cords, resulting in
a fire or electrical shock.

Move the machine.
Ensure that all covers and trays are closed, and hold the lift handles
with the front side of the machine facing you.
Check the weight of the machine to carry it safely.
“Main Specifications” (→P.11-2)

CAUTION
Set the machine down slowly and carefully.
Be careful not to hurt your hands or fingers.

Maintenance

IMPORTANT
Do not carry the machine with covers or trays open.
Make sure that the scanning platform and paper cassette are closed
before carrying the machine.

8-17

Maintenance

8-18

Chapter

Troubleshooting
This section describes solutions for cases such as paper jam and when problems are not
solved.

Clearing Jams

9-2

Print Result Is Not Good

9-13

Document Jams in the Feeder

9-3

Paper Curls

Paper Jams Inside the Machine

9-3

Paper Creases

9-14

Printing Is Uneven

9-14

White Specks Appear

9-15

The Toner Does Not Fix onto the Paper Well

9-16

The Printed Paper Has Vertical Streaks

9-16

Display Message

9-6

Error Codes

9-6

If Appears

9-8

Troubleshooting

9-9

Check the Following First
Is the power switched ON?

9-9
9-9

Has the power switch been just turned ON?

9-9

Is the machine in Sleep mode?

9-9

Are the settings proper?

9-9

Is the Error indicator on or blinking?

9-9

Does a message appear on the display?

9-10

Is the telephone line connected or configured properly?

9-10

If You Cannot Solve a Problem

9-10

If a Power Failure Occurs

9-11

If You Cannot Solve a Problem

9-12

Customer Support (U.S.A.)

9-12

Customer Support (Canada)

9-12

9-13

Smudge Marks of Spattering Toner Appear around the Text or
Patterns

9-17

The Overall Print Result Is Dark

9-17

Copied Lines and Text Appear Faded

9-18

Printed Bar Codes Cannot Be Scanned

9-18

Paper Jams Occur Frequently When Performing
2-Sided Printing (MF4570dn Only)

9-18

9-1

Clearing Jams
Keys to be used for this operation

IMPORTANT
If the jammed paper is torn
Remove all torn pieces to avoid further jams.

If repeated paper jams occur
Check the following.
• Ensure that the following packing material is completely
removed.

When appears on the display, a paper jam has
occurred in the feeder or inside the machine. To remove the
jammed document or paper, follow the instructions on the
display. Press [ ] to view the next step.

Paper jam.
Press [ ] to
display steps.

This part (a plastic part
attached to the end of
paper) is also a packing
material. Be sure to
remove it.

“Document Jams in the Feeder” (→P.9-3)
“Paper Jams Inside the Machine” (→P.9-3)

WARNING
When removing the jammed document or paper
Use caution to avoid cutting your hands.
When removing jammed paper or when inspecting the
inside of the machine
Do not allow necklaces, bracelets, or other metal objects to
touch the inside of the machine, as this may result in burns
or electrical shock.

• Fan the paper stack and tap the edge on a flat surface to align
the paper before loading it into the machine.
• Ensure that the paper you are using meets the requirements for
use.
“Paper Requirements” (→P.2-6)
• Ensure that you have removed all scraps of paper from the inside
of the machine.

Do not touch the transfer roller (A).
Touching the transfer roller (A) may damage the machine.

Troubleshooting

CAUTION
If loose toner comes into contact with your skin or
clothing
Wash with cold water. Avoid warm water, as this will set the
toner and cause it to stain your skin or clothing.
When removing the jammed document or paper
If paper is jammed, remove the jammed paper so that any
pieces of paper do not remain inside the machine according
to the displayed message. Also, do not put your hand in an
area other than indicated areas, as this may result in personal
injuries or burns.
Do not touch the fixing unit (A).
Touching the fixing unit (A) may cause burns as it becomes
very hot during use.

(A)

NOTE
Do not force the jammed document or paper out of the
machine
Contact your local authorized Canon dealer or the Canon help line
for assistance, if needed.

(A)

9-2

Document Jams in the Feeder
Referring to the procedure on the display, follow the steps
below to remove jammed documents.

1
2

Paper Jams Inside the Machine
Referring to the procedure on the display, follow the steps
below to remove jammed paper.

Hold the operation panel.

Lift the scanning platform.

Remove any document loaded in the feeder.
Open the feeder cover.

Remove any jammed document by pulling it
gently.

If you cannot lift the scanning platform

Close the feeder cover.

Hold the grip on the left front side of the toner
cover.

Troubleshooting

Place documents in the feeder.

9-3

Open the toner cover.

Remove any jammed paper by pulling it gently.

If you do not see the leading edge of the jammed paper
Do not force to pull the paper, and proceed to step 9.

Lift the paper exit guide, and then firmly close it.
Ensure that each end of the paper exit guide is closed.

Remove the toner cartridge.

(1)

Remove any jammed paper by pulling it gently.

(2)

10 Remove any jammed paper by pulling it gently.
(1) Gently pull any jammed paper downward from between the
fixing unit (A) and transfer roller (B) until the leading edge
emerges from the machine.

Troubleshooting

(A)
(B)

If you do not see the leading edge of the jammed paper
Do not force to pull the paper, and proceed to step 7.

Push up the green colored part (A), and then pull
the paper exit guide to open.

(A)
(1)
(2)

(3)

9-4

(2) When the leading edge emerges, hold both sides of the
jammed paper and carefully pull it out.

11 Remove any jammed paper by pulling it gently.

16 Open the rear cover.

12 Lift the dust cover.

17 Remove any jammed paper by pulling it gently.

13 Remove any paper loaded in the paper cassette.

18 Close the rear cover.
19 Insert the toner cartridge.
Fit the protrusions (A) on each side of the toner cartridge into the
guides located on each side of the machine,and then slide the
toner cartridge into the machine until the toner cartridge meets
the back of the machine.
(A)
(A)

Troubleshooting

14 Remove any jammed paper by pulling it gently.

20 Close the toner cover.
If you cannot close the toner cover

15 Reload paper into the paper cassette and lower
the dust cover.

Ensure that the toner cartridge properly set in the machine. Do
not try to forcefully close the toner cover, as this may damage the
machine.

For MF4570dn
Next, proceed to step 16.
For MF4450

21 Lower the scanning platform.
The machine is ready to print.

Proceed to step 19.

9-5

Display Message
If messages appear, see the following and solve the problem.
e-Manual → Troubleshooting → Display Messages

Error Codes
An error code is a 3-digit code recorded as an error log when an error occurs.
You can view the code in the following locations.
Error codes for fax jobs

• Error send report
• Error receive report
• Job history in the system status screen
01/01/2011 02:07 PM FAX

123XXXXXXX

CANON

P.0001

＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
＊＊＊ Error Report (Send) ＊＊＊
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
Send job resulted in error.

0123
0123456789
name
01/01 02:07 AM
01'15
1
NG
#018
Busy/No Signal

Job No.
Address
Name
Start Time
Call Length
Sheets
Result

Error code

For details on the reports, refer to the following.
e-Manual → Basic Operation → Setting the Report to Print Automatically
For details on the error code, see the following.

Troubleshooting

#001

#003

#005

#012

#018

9-6

Cause

A document may be jammed.

Action

Remove the jammed document.

Cause

A high volume of data is causing the transmission to take a very long time.

Action 1

Reduce the scanning resolution, and then try to send the document again.

Action 2

Reduce the scanning resolution or ask the sender to divide the document before sending it again.

Cause 1

A fax recipient did not respond within 35 seconds.

Action

Repeat the procedure from the first step. Additionally, ask the recipient to check the fax machine. If you are making an
overseas call, add a pause to the fax number.

Cause 2

The recipient may not be using a G3 fax machine.

Action

Ask the recipient what type of fax machine is being used, and then send the document to the recipient’s G3 fax
machine. If the recipient does not have a G3 fax machine, send the document again using a communication mode
compatible with the recipient’s fax machine.

Cause

The recipient’s machine has run out of paper.

Action

Ask the recipient to ensure that paper is loaded in their machine.

Cause 1

Redialing was not able to obtain any response. The line may be in use or disconnected.

Action

Wait a moment, and then try again. If you are still unable to send the document, ask the recipient to verify that the fax
machine is turned ON. If the line is busy, wait a few moments, and try to send the document again.

Cause 2

You were not able to send the document because the line is busy or disconnected.

Action

Verify that the recipient can communicate with you, and then try again.

Cause 3

The settings on the recipient’s machine are incompatible with yours.

Action

Verify that the recipient can communicate with you, and then try again.

Cause 4

No pause was added to the fax number when attempting an international fax transmission.

Action

Add a pause after the country code or the recipient’s fax number, and then redial the number. If you want to send the
document to a recipient that is registered under a onetouch key, change the settings for international sending in the
detailed setting screen.

#022

#037

#054

#099

#995

Cause

Sending faxes from a computer is restricted.

Action

The restriction needs to be canceled. Contact your administrator for more details.
e-Manual → Security → Restricting Destination Operations/Sending Functions → Restricting Fax Sending from a
Computer

Cause 1

The machine’s memory is full.

Action 1

Print, send, or delete any documents stored in the memory.

Action 2

For a copy job, divide the document into two or set to before copying.
e-Manual → Copy → Selecting Image Quality (Copy)

Cause 2

The data size exceeds the machine’s available memory.

Action

Reduce the data resolution or change the file format to reduce the data volume.

Cause 1

A user abbreviation or a user fax number is not registered when sending a fax from a computer.

Action

Cause 2

The recipient’s fax number exceeds 40 digits when sending a fax from a computer or importing a destination from the
address book.

Action

Reduce the recipient’s fax number under 40 digits.

Cause

You unintentionally canceled a job.

Action

Try to resend the job.

Cause

The job waiting to be sent or received has canceled by a user.

Action

Retry to send or receive the job as needed.

Troubleshooting

9-7

If Appears
The message appears when the paper size specified in , or in the menu is different from
the size of the paper loaded in the paper cassette or multi-purpose tray. If the message appears, perform the following operations.

NOTE
When printing using the printer driver
To ignore the message and proceed to print on paper that is currently set, press [ ] or [
images may be printed improperly, for example, part of images may not be printed.

] to select , and then press [OK]. However,

Change the menu according to the size of the loaded paper
Cancel the job, see “Setting a Paper Size and Type” (→P.2-14), and then change .

IMPORTANT
When printing using the printer driver
Check that the paper size setting on the computer is also correct.

Loading paper of the size specified in the menu
(1) See “Loading Paper” (→P.2-9) and reload the paper specified in the menu.
(2) Press [ ] or [ ] to select , and then press [OK].

Troubleshooting

9-8

Troubleshooting
If one of the following problems occurs during use, try the actions suggested here before contacting technical support.

Check the Following First
Is the power switched ON?
Ensure that the power cord is securely plugged into the machine and into the wall outlet.

Ensure that electricity is supplied from the power cord. Use another power cord or verify that cord is broken using a voltmeter.

Turn ON the power switch.
If there is no problem

Has the power switch been just turned ON?
Wait a moment for the machine starts and warm up.
If there is no problem

Is the machine in Sleep mode?
Press [

] (Energy Saver) on the operation panel to exit the Sleep mode.
If there is no problem

If the machine emits the entry error tone and does not start operating when you press [
settings may be invalid. Recheck the settings.

] (Start), your combination of

Troubleshooting

Are the settings proper?

If there is no problem

Is the Error indicator on or blinking?
Ensure that paper is loaded properly in the paper cassette or multi-purpose tray.
“Loading Paper” (→P.2-9)
Check if paper is jammed.
“Clearing Jams” (→P.9-2)
Turn OFF the power switch of the machine, wait for more than 10 seconds, and then turn it ON. If the problem is solved, the
Error indicator will turn off and the display will return to standby mode. If the Error indicator keeps blinking, unplug the power
cord and contact your local authorized Canon dealer or the Canon help line.
If there is no problem

9-9

Does a message appear on the display?
If an error message appears on the display, refer to the following section to locate the appropriate corrective action.
“Display Message” (→P.9-6)
Print the transmission management report to see if any errors are listed.
e-Manual → Basic Operation → Printing a List → Printing a Communication Management Report
If there is no problem

Is the telephone line connected or configured properly?
Ensure that the telephone cable is properly connected. Check if the cables for the telephone line port and external device
port on the back of the machine are connected inversely.
“Configuring and Connecting the Fax” (→ Starter Guide)
Ensure that the line type setting (dial or push) corresponds to the type of telephone line that is connected to the machine.
“Select Line Type” (→P.6-20)
Ensure that the telephone line is not receiving interference from nearby devices such as a microwave oven. This may affect
status of the telephone line.
If there is no problem

If You Cannot Solve a Problem

See “Troubleshooting” in the e-Manual, then solve the problem.

Troubleshooting

9-10

If a Power Failure Occurs
The machine cannot be used while power supply is cut off.
The fax function during a power failure
• Documents cannot be sent or received.
• You may not be able to make a call using the external telephone depending on your telephone.
• You may be able to get a call using the external telephone depending on your telephone.

IMPORTANT
Data storage for when power supply is cut off
Even if power is lost due to a power failure or accidental unplugging, any sent or received documents stored in the memory are backed up for
approximately 5 minutes.

NOTE
Charging the built-in battery
It takes approximately 24 hours to fully charge the built-in battery after the machine is turned ON.
If the built-in battery has not been charged fully charged, documents stored in the memory may not be properly backed up.

Troubleshooting

9-11

If You Cannot Solve a Problem
Customer Support (U.S.A.)
If you cannot solve the problem after having referred to the
information in this chapter, contact Canon Customer Care
Center at 1-800-OK-CANON Monday through Friday between
the hours of 8:00 A.M. to 8:00 P.M. EST. On-line support is also
available 24 hours a day at the website
http://www.canontechsupport.com.
Please have the following information ready when you
contact Canon:
• Product name (imageCLASS MF4570dn/MF4450)
• Serial number (a character string which consists of three
alphabets and a 5-digit number and is indicated on the
rating label located on the rear side of the machine)
● MF4570dn

● MF4450

Customer Support (Canada)
Canon Canada Inc., offers a full range of customer technical
support options*:
* Support program specifics are subject to change without notice.

• For step-by-step troubleshooting, e-mail technical support,
the latest driver or document downloads, and answers to
frequently asked questions, visit http://www.canon.ca/
• Free live technical support 9 A.M. to 8 P.M. EST Monday
through Friday (excluding holidays) for products still under
warranty 1-800-OK-CANON
• For the location of the authorized service facility nearest
you, visit http://www.canon.ca/ or 1-800-OK-CANON
• If the problem cannot be corrected by using one of the
above technical support options, repair options are
available at the time of your call to the live technical
support number above or via the website at
http://www.canon.ca/
* Support program specifics are subject to change without notice.

Please have the following information ready when you
contact Canon:
• Product name (imageCLASS MF4570dn/MF4450)
• Serial number (a character string which consists of three
alphabets and a 5-digit number and is indicated on the
rating label located on the rear side of the machine)
Rating label

Rating label

● MF4570dn

● MF4450

• Place of purchase
• Nature of problem
• Steps you have taken to solve the problem and the results

WARNING
Troubleshooting

If the machine makes strange noises or emits smoke or
odd odor
Turn OFF the power switch immediately, disconnect the
power cord, and contact Canon Customer Care Center.
Do not attempt to disassemble or repair the machine
yourself.

Rating label

• Place of purchase
• Nature of problem
• Steps you have taken to solve the problem and the results

IMPORTANT
If you attempt to repair the machine by yourself
It may void the limited warranty.

WARNING
If the machine makes strange noises or emits smoke or
odd odor
Turn OFF the power switch immediately, disconnect the
power cord, and contact Canon Customer Care Center.
Do not attempt to disassemble or repair the machine
yourself.

IMPORTANT
If you attempt to repair the machine by yourself
It may void the limited warranty.

9-12

Print Result Is Not Good
NOTE
Contacting your local authorized Canon dealer
If a problem that is not indicated in the e-Manual occurs, if none of the suggested measures solve the problem, or if you cannot determine the
problem, contact your local authorized Canon dealer.

Paper Curls

Perform one of the following solutions according to the cause.
Damp paper is used.
Solution 1

Replace the paper with new paper in an unopened package.
“Paper Requirements” (→P.2-6)

Solution 2

Perform the following procedure in the printer driver when you are using plainpaper (60 to 90 g/m2).
1. Display the [Page Setup] tab.
2. Set [Paper Type] to [Plain Paper L].
Change the settings from the operation panel.
e-Manual → Maintenance → Special Mode
The level of improvement according to the setting option is as following.

Solution 3

* Change of paper type or environment may reduce the curl or wrinkle problem, even without changing the setting.
* This setting is available when
• the is set to , , , or
• the is set to , , ,
, , or
* As you select an option that has higer effect, printing speed becomes slower.

Troubleshooting

→ → →
(low)
(high)

Appropriate paper is not being used.
Solution

Replace the paper with which can be used with this printer.
“Paper Requirements” (→P.2-6)

9-13

Paper Creases

Perform one of the following solutions according to the cause.
The paper is not loaded properly.
Solution

Load the paper properly.
“Loading Paper” (→P.2-9)

Damp paper is used.
Solution

Replace the paper with new paper in an unopened package.
“Paper Requirements” (→P.2-6)

Appropriate paper is not being used.
Solution

Replace the paper with which can be used with this printer.
“Paper Requirements” (→P.2-6)

There is a foreign object inside the printer.
Solution

Remove the foreign object inside the printer.

Depending on the paper type or the operating environment, the paper may be creased.
Change the settings from the operation panel.
e-Manual → Maintenance → Special Mode
The level of improvement according to the setting option is as following.

Troubleshooting

→ → →
(low)
(high)

Solution

Printing Is Uneven

Perform one of the following solutions according to the cause.

9-14

Paper is too moist or Too dry.
Solution

Replace the paper with new paper in an unopened package.
“Paper Requirements” (→P.2-6)

Toner is nearly out.
Solution

To view the solution, refer to the following.
“Replacing the Toner Cartridge” (→P.8-10)

The drum in the toner cartridge is deteriorated.
Solution

Replace the toner cartridge with a new one.
“Replacing the Toner Cartridge” (→P.8-10)

Unevenness may appear when thin lines are printed.

Solution

Change the setting to from the operation panel.
e-Manual → Maintenance → Special Mode
* If you use this mode, the following problems may occur.
• The output is less fine.
• Toner smears even on unnecessary parts.
• Toner consumption increases.

White Specks Appear

Perform one of the following solutions according to the cause.
Appropriate paper is not being used.
Replace the paper with which can be used with this printer.
“Paper Requirements” (→P.2-6)

Damp paper is used.
Solution

Replace the paper with new paper in an unopened package.
“Paper Requirements” (→P.2-6)

Troubleshooting

Solution

The drum in the toner cartridge is deteriorated.
Solution

Replace the toner cartridge with a new one.
“Replacing the Toner Cartridge” (→P.8-10)

When you print a document of highly contrasting density, white specks may appear on the outlines of the text or
images.

Solution

Change the [Special Print Mode] setting to [Special Settings 2] from the printer driver.
e-Manual → Maintenance → Special Mode
* When [Special Settings 2] is selected, printing density is lower than when [Off ] or [Special Settings 1] is selected.
Also, text or lines may be less clear.

9-15

The Toner Does Not Fix onto the Paper Well

Perform one of the following solutions according to the cause.
Paper type setting is not specified properly.

Solution

Properly specify the paper type setting.
* If you are using coarse paper, select one of the followings.
•
•
•
“Setting a Paper Size and Type” (→P.2-14)

Appropriate paper is not being used.
Solution

Replace the paper with which can be used with this printer.
“Paper Requirements” (→P.2-6)

Depending on the environment (in low temperature environments), toner may not be fixed sufficiently, and
output may be less clear.

Solution

Change the setting to from the operation panel.
e-Manual → Maintenance → Special Mode
* Change of environment may improve the toner fixation, even without changing the setting.
* If you use this mode, printing speed becomes slow.

The Printed Paper Has Vertical Streaks
Troubleshooting
Perform one of the following solutions according to the cause.
Depending on the paper type or the operating environment, vertical streaks may appear on the printed paper.
Solution 1

Replace the paper with new paper in an unopened package.
“Paper Requirements” (→P.2-6)
When copying or printing received faxes
Change the setting from the operation panel.
When printing from a computer
Change the [Special Print Adjustment] setting from the print driver.
e-Manual → Maintenance → Special Mode
The level of improvement according to the setting option is as following.

Solution 2

→ → → →
(low)
(high)
* Change of paper type or environment may reduce the streaks, even without changing the setting.
* As you select an option that has higher effect, printing density becomes lower. Outlines of printed text or images
may be less clear, or images may be slightly jagged.

9-16

Solution 3

When printing received faxes
Change the setting to from the operation panel.
When printing from a computer
Change the setting to from the print driver.
e-Manual → Maintenance → Special Mode
* Change of paper type or environment may reduce the streaks, even without changing the setting.
* This mode is more effective than , however, printing speed becomes slow.
* This mode has higher priority than .

The toner cartridge was replaced, or the printer was not printed for a long period of time.
Change the setting from the operation panel.
e-Manual → Maintenance → Special Mode
The level of improvement according to the setting option is as following.

Solution

→ → →
(low)
(high)
* Change of paper type or environment may reduce the streaks, even without changing the setting.
* As you select an option that has higher effect, printing speed becomes slower.

Smudge Marks of Spattering Toner Appear around the Text or Patterns

Perform one of the following solutions according to the cause.
Appropriate paper is not being used.
Solution

Replace the paper with which can be used with this printer.
“Paper Requirements” (→P.2-6)

Solution

Change the settings to from the operation panel.
e-Manual → Maintenance → Special Mode
* Maintain this setting in normal conditions. Change the setting only when the problems mentioned above
occur.
* If you use this mode, printing quality may become lower depending on the paper type (especially for thin paper) or
environment (especially in wet environments)

Troubleshooting

Depending on the paper type (especially for heavy paper) or the operating environment (especially in dry
environments), smudge marks of spattering toner may appear.

The Overall Print Result Is Dark

Perform one of the following solutions according to the cause.

9-17

The copy density is not properly set.
Solution

Adjust the or lower from the operation panel.
“Adjusting the Density” (→P.3-4)
e-Manual → Copy → Adjusting the Density → Finely Adjusting the Density

The machine is exposed to direct sunlight or strong light.
Solution

Move the machine.
e-Manual → Maintenance → Transporting the Machine

Copied Lines and Text Appear Faded

A
B
C
Perform the following procedure.
is set to (default).
Solution

Set to , and then try to copy again.
“Selecting Image Quality (Copy)” (→P.3-4)

Printed Bar Codes Cannot Be Scanned

Troubleshooting

Perform the following procedure.
When printing a bar code with the default printing preferences, the bar code may not be able to
be scanned.

Solution

Change the [Special Print Mode] setting to [Special Settings 1] from the print driver.
e-Manual → Maintenance → Special Mode
* When [Special Settings 1] is selected, printing density is lower than when [Off ] is selected. Also, text or lines may be
less clear.

Paper Jams Occur Frequently When Performing 2-Sided Printing (MF4570dn Only)
Perform the following procedure.
Depending on the paper type (especially for thin paper or curled paper), paper jams occur frequently when
performing 2-sided printing.

Solution

9-18

Change the settings from the operation panel.
e-Manual → Maintenance → Special Mode
* Maintain this setting in normal conditions. Change the setting only when the problems mentioned above
occur.
* If you use this mode when you are not using thin paper, images may become white.

Chapter

Registering/Setting the Various Functions
You can set or change machine functions from the setting menu according to your purpose.

Setting Menu List

10-2

Printing a User Data List

10-2

Contents of the Setting Menu

10-2

10-1

Setting Menu List
Printing a User Data List
To see the contents of current settings, print out user’s data list.

Keys to be used for this operation

Ensure that the paper is loaded, and then press
[OK].
Load the paper indicated in the display.

Report

Supported paper:
Size: A4, LTR
OK
OK

1
2

Press [

Printing starts.

] (Report).

Print user data
list?

Press [ ] or [ ] to select ,
and then press [OK].
Reports
Reports Settings
Print Report Lists

Press [ ] to select , and then press [OK].

Yes

Press [
Lists> screen.

] (Report) to close , and
then press [OK].
Print Report Lists
Address Book List
User Data List
Communication Manage...

Contents of the Setting Menu
[Address Book] key

[Paper Settings] key

Registering/Setting the Various Functions

[Menu] key

[Report] key

Configure the machine settings.
You can perform adjustment and
cleaning.

Viewing the Route Map

Menu Operations
Returns to the previous hierarchy.

This area represents the first hierarchy in the menu.

Proceeds to the next hierarchy.

Timer Settings
Time&Date Settings
Date Display Type

P.1-11

YYYY MM/DD
MM/DD/YYYY
DD/MM YYYY

Selects an upper item/setting value.

This area represents
hierarchies for "setting values."
The setting values with the
gray background or of the
boldface represents the default
settings.

These represents reference areas in this manual.
For the items with the
icon, see the e-Manual.

Selects a lower item/setting value.
Proceeds to the next hierarchy. Also, a setting
value is determined, and an operation is performed.
* When appears in the screen, you need to select
and press [OK] after specifying the setting.
Back

This area represents hierarchies for "setting item."
Reset

- Settings or values with "*" mark appear only in MF4570dn.

10-2

You can specify the settings for
various report output conditions and
output a report.

Returns to the previous hierarchy.
Cancels the setting and returns to the initial screen.

Address Book

1 Press [FAX].

1 Press [Menu].

2 Press [Address Book].

2 The setting menu is displayed.

3 The address book is displayed.
4 Press [ ] to select [

Keys to be used for this operation

], and then press [OK].

Keys to be used for this operation

3
4

Preferences
Coded Dial

P.5-6

Sound Volume Control

Fax

CD-ROM

Off

Fax Tone
Max 16 characters

Name

On
- Fax Volume: 1 to 5

Max 40

Destination

Off

Ring Tone

Settings

On
- Ring Tone Volume: 1 to 5

Off

ECM TX

On
33600 bps

Speed

Off

TX Done Tone

On
- TX Done Volume: 1 to 5

14400 bps
9600 bps

Sound Only When Error Occurs
- TX Done Volume: 1 to 5

7200 bps
4800 bps

Off

RX Done Tone

2400 bps

On
- RX Done Volume: 1 to 5

Domestic

Long Distance

Sound Only When Error Occurs
- RX Done Volume: 1 to 5

International (1)
International (2)
International (3)

Off

Scanning Done Tone

On
- Scanning Done Volume:
1 to 5

Coded Dial:Registration No.
Group
Max 16 characters

Name

One-Touch Dial

Sound Only When Error Occurs
- Scanning Done Volume:
1 to 5

Select Coded Dial/One-Touch Dial

Destination
P.5-3

Off

Entry Tone

Fax

On
- Entry Tone Volume:
1 to 5

Enter Registration No.
Max 16 characters

Name

Max 40

Destination

Off

Entry Error Tone

On
- Entry Err. Tone Volume:
1 to 5

Settings
Off

ECM TX

Off

Warning Tone

On
- Warning Tone Volume:
1 to 5

33600 bps

Speed

14400 bps
9600 bps

Off

Job Done Tone

On
- Job Done Tone Volume:
1 to 5

4800 bps
2400 bps
Domestic

Long Distance

International (1)
International (2)

Display Settings

CD-ROM

Select Default Screen

Copy
Fax

International (3)

Scan

One-Touch Dial:Registration No.

Status Monitor/Cancel

Group
Status Monitor/Cancel Device Priority

Enter Registration No.

Select Coded Dial/One-Touch Dial

Destination

Off
On

Max 16 characters

Name

Language

English
French

One-Touch Dial: Registration No.

Portuguese
Spanish

Paper Settings

Remote UI Language *

English
French

Press [Paper Settings].

Portuguese
Keys to be used for this operation

Spanish
Contrast

Registering/Setting the Various Functions

7200 bps

-2 to 0 to +2

Invert Screen Colors

Off

mm/Inch Entry Switch

Inch

"Setting a Paper Size and Type" (P. 2-16)

Continues to the next page

10-3

Continues from the previous page

Continues from the lower left

Gram/Pound Switch

Gram

TX Function Settings

Pound

Change Defaults

P.6-18

ECM TX

P.6-20

1 to 2 to 5 (seconds)

Message Display Time

Slow

Scrolling Speed

Normal
Fast

Pause Time

P.6-21

Auto Redial

P.6-21

Auto

Cursor Movement

Manual
Toner Saver Mode

P.8-8

Off

Off
On

Paper Feed Method Switch

CD-ROM

2 to 99 (minutes)
Off

Redial When Error Occurs

On
Check Dial Tone Before Sending

Print Speed Priority

Drawer 1

Print Speed Priority

P.6-21

Off
On

Fax Setup Guide

Multi-Purpose Tray

Off

1 to 2 to 15 (seconds)

Redial Times

On
Fax

1 to 2 to 15 (seconds)

Redial Interval

Copy

Off
On

CD-ROM

Print Side Priority

Fax RX Settings
RX Function Settings
2-Sided Printing

P.6-22

Reduce RX Size

P.6-22

Timer Settings
Time & Date Settings

P.1-11

DD/MM YYYY
YYYY MM/DD
12 Hour (AM/PM)

12/24 Hour Clock

P.6-22

Off

Continue Print. When Toner Is Nearly Out P.6-22

Off

RX Page Footer

24 Hour
Current Time Settings

Off

Daylight Savings

On
- Start (M/W/D)
- End (M/W/D)

Off
On
- Ratio: Auto, 97, 95, 90, 75(%)
- Direction: Vertical/Horizontal,
Vertical Only

MM/DD/YYYY

Date Display Type

Off

Fax Settings
ECM RX

P.6-22

Off
On

Sleep Timer

P.1-10

Auto Reset Timer

CD-ROM

Screen After Auto Reset

CD-ROM

10 to 240 (minutes)

Incoming Ring

P.6-23

1 to 2 to 9 (minutes)
Default Screen

Remote RX

P.6-23

CD-ROM

0=Off
1 to 5 to 60 (minutes)

Auto RX Switch

P.6-23

Registering/Setting the Various Functions

Correct Density

P.3-9

CD-ROM

Adjustment/Maintenance
-4 to 0 to +4

Fax TX Settings

P.6-20

Select Line Type

P.6-20

Off

Special Mode V

Off
Mode 2
Mode 3

Dial 10 PPS

Direct

Special Mode Z
Copy

Mode 2

Adapter 2
P.6-20

Sender ID

Print Location

P.6-20

Mode 4
Fax

Off
Mode 1

off

Mode 2

Mode 3
Mode 4

On Image
Above Image

Mark No. as: Tel/FAX

Mode 3

Off
On
- Offhook Alarm Volume:
1 to 5

Off
Mode 1

Adapter 1

Off-Hook Alarm

CD-ROM

Special Mode U

Mode 1

Tone
Public Line Connection

Special Processing

Basic Settings
Register Unit Name

Off
On
- Incoming Ring Time: 1 to
15 to 99 (seconds)

Copy Settings
Change Defaults

Off
On
- Remote RX ID: 00 to 25
to 99

Selected Screen
Auto Offline Time

Off
On
- Ring Times: 1 to 2 to 99
(times)

0=Off

Special Mode B

Off
Mode 1

FAX

Mode 2

TEL

Mode 3
Special Mode C

Off
On

Continues to the upper right

10-4

Continues to the next page

Continues from the lower left

Continues from the previous page

DNS Settings

Special Mode D
Off

Copy

DNS Host Name/Domain Name Settings

Use IPv4 Host/Domain

Off

Special Mode I

DNS Dynamic Update Settings

On
Special Mode J

Off

Special Mode K

Off

Off
On
- Register Manual Add.:
Off, On
- Register Stateful Add.:
Off,On
- Register Stateless Add.:
Off, On

On
Clean Fixing Unit

Off
- Host Name
- Domain Name

P.8-3

mDNS Settings

Off
On

System Management Settings
System Manager Information Settings

DNS Host Name/Domain Name Settings

LPD Settings

System Manager PIN: Up to seven digits

Off
On

System Manager Name: Up to 32 characters
Device Information Settings

Off (mDNS Name)
On

CD-ROM

RAW Settings

Off

CD-ROM

Device Name: Up to 32 characters
WSD Settings

Location: Up to 32 characters

Use WSD Print
Network Settings *
TCP/IP Settings

Use WSD Browsing

IPv4 Settings
Use Multicast Discovery

Auto Obtain
Off

Use HTTP

Off
On

BOOTP

Port Number Settings

RARP

LPD: 0 to 515 to 65535

Off

RAW: 0 to 9100 to 65535

HTTP: 0 to 80 to 65535

Manual Obtain

SNMP: 0 to 161 to 65535

IP Address

0.0.0.0

Subnet Mask

0.0.0.0

Gateway Address

0.0.0.0

IP Address Range Settings
IPv4 Address Range Settings

Off
Only Allowed Addresses On

View Settings

Only Denied Addresses On

Auto Obtain

Allowed/Denied Addresses On

IP Address

IPv6 Address Range Settings

Subnet Mask

Off
Only Allowed Addresses On

Gateway Address
PING Command

Off
On

DHCP

Auto IP

Off
On

IP Address Settings

Select Protocol

Off
On

CD-ROM

Only Denied Addresses On
0.0.0.0

Allowed/Denied Addresses On

DNS Settings

Allowed RX MAC Address Settings

Off

Primary DNS Server

0.0.0.0

Secondary DNS Server

0.0.0.0

SNMP Settings

Off
On

DNS Host Name/Domain Name Settings

Community Name 1

Public

Host Name

Community Name 2

Domain Name

Writable SNMP 1

Off

Writable SNMP 2

Off

DNS Dynamic Update Settings
Off

On
Dedicated Community Settings

mDNS Settings
Off
On

Read-Only (RO)
mDNS Name

Printer Management Information From Host

IPv6 Settings
Use IPv6

Dedicated Port Settings

Off
On

View Settings

Startup Settings

0 to 300 (seconds)

Off
Ethernet Driver Settings

Auto Detect

View Settings
Use DHCPv6

Off
On

Stateless Address Settings

Off
Read-Write (RW)

Registering/Setting the Various Functions

DNS Server Settings

Off
On
View Settings

Off
- Communication Mode :
Half Duplex, Full Duplex
- Ethernet Type:
10 Base-T, 100 Base-TX
On

MAC Address
Continues to the upper right

Continues to the next page

10-5

Continues from the previous page

Continues from the lower left

Communication Management Settings

Initialize Menu

Fax Settings
TX Start Speed

P.6-24

RX Start Speed

P.6-24

Preferences

CD-ROM

Timer Settings

CD-ROM

33600 bps
14400 bps
9600 bps

Copy Settings

CD-ROM

Fax TX Settings

CD-ROM

Fax RX Settings

CD-ROM

Special Processing

CD-ROM

Initialize All

CD-ROM

7200 bps
4800 bps
2400 bps
Memory Lock Settings

P.6-25

Off
On

Memory Lock PIN
Report Print

Off

Memory Lock Time

Off

On
- Memory Lock Start Time
- Memory Lock End Time
Select Country/Region

P.6-25

United States (US)

Reports

1 Press [Report].
2 The report output menu is displayed.
Keys to be used for this operation

Canada (CA)
Brazil (BR)
Mexico (MX)

Other
Remote UI On/Off *

CD-ROM

Off
On

Restrict TX Function
Address Book PIN

P.6-25

Restrict New Destinations

P.6-25

Allow Driver Faxing

P.6-25

Off
On
Off
On

Restrict Sending From History P.6-25

Reports Settings

CD-ROM

Off

TX Result Report

Off

Only When Error Occurs

On
Fax No. Confirmation Re-Entry

P.6-25

Off

Report With TX Image

On
Restrict Sequential Broadcast P.6-25

Off
Confirm Sequential Broadcast

Communication Management Report
Auto Print After 40 Transmissions

Display Job History

CD-ROM

Off
On

USB Device On/Off

CD-ROM

Off
On

Reject Sequential Broadcast

Off

Separate TX/RX

On
Off

RX Result Report

Off

Only When Error Occurs
Print Reports Lists

Update Firmware

CD-ROM

Address Book List

Coded Dial
One-Touch

Registering/Setting the Various Functions

Initialize Address Book

CD-ROM

Initialize System Settings

CD-ROM

Communication Management Report
System Manager Information Settings
Device Information Settings
Network Settings *
Communication Management Settings
Select Country/Region
Remote UI On/Off *
Restrict TX Function
Display Job History
USB Device On/Off
Initialize All

Continues to the upper right

10-6

User Data List

Group

Chapter

Appendix
This section describes the specifications of the machine and information for Macintosh users.

Main Specifications

11-2

Machine Specifications

11-2

Copy Specifications

11-2

Printer Specification

11-2

Scanner Specifications

11-3

Fax Specifications

11-3

Telephone Specifications

11-3

For Macintosh Users

11-4

Displaying Driver Guides (PDF Files)

11-4

Displaying a Driver’s Help System

11-4

Content of the e-Manual about Features that Are Unavailable
on the Macintosh

Index

11-4

11-5

11-1

Main Specifications
Machine Specifications

Copy Specifications

Machine Specifications
Type
Power Supply

120 to 127 V, 60 Hz (Power requirements
differ depending on the country in which
you purchased the product.)

Power Consumption

• Maximum: 1,090 W or less
Average consumption during standby
mode: Approx. 10 W
Average consumption during sleep mode:
Approx. 3 W

Warm-up Time

• 12 seconds or less*
(Temperature: 68 °F (20 °C), humidity: 65%
RH ;
from when the machine is turned on with
the power switch to when the standby
display appears)
* Warm-up time may vary depending on
the condition and environment around
the machine.

Weight

• MF4570dn
Main unit (including toner cartridge):
Approx. 27.1 lb (12.3 kg)
• MF4450
Main unit (including toner cartridge):
Approx. 25.8 lb (11.7 kg)

Dimensions
(W x L x H)

15 3/8” x 16 5/8” x 14 1/2”
(390 mm x 421 mm x 370 mm)

Installation Space
(W x L x H)

• MF4570dn
24 1/4” x 31 5/8” x 29”
(617 mm x 804 mm x 735 mm)
• MF4450
24 1/4” x 30 7/8” x 29”
(617 mm x 784 mm x 735 mm)

Environmental
Conditions

Copy Specifications

Personal Desktop

Temperature: 50 to 86°F (10 to 30°C)
Humidity: 20% to 80% RH (no condensation)

Acceptable
Documents

“Document Requirements ” (→P.2-2)

Acceptable Paper
Stock

“Paper Requirements” (→P.2-6)

Printable Range

“Printable Range” (→P.2-8)

Scanning Range

“Scanning Range” (→P.2-2)

Scanning Resolution

• Text/Photo (High Speed): 300 dpi x 300
dpi
• Text/Photo, Photo, Text: 600 dpi x 600 dpi

Output Resolution

600 dpi x 600 dpi

Copy Ratio

•
•
•
•

Copy Speed (Letter
Plain Direct)*

• MF4570dn
26 cpm
• MF4450
24 cpm

Successive Copying
Capacity

Maximum 99 copies

First Copy Time
(Letter)

• Platen glass
8.7 seconds or less
• Feeder
12 seconds or less

* Speed when using Letter size Plain paper and copying the same
data continuously. Depending on the type, size, or feeding
direction of the paper, such as when using small size paper, copy
speed may become slower. Also, operation may pause or become
slow to readjust the temperature or print quality of the machine,
when copying continuously.

Printer Specification
Printer Specification

Appendix

Printing Method

Indirect electrostatic system (On-demand
fixing)

Paper Capacity

Multi-purpose tray: 1 sheet
Paper cassette: Approx. 250 sheets (16 to 21
lb Bond (60 to 80 g/m2))

Output Tray Capacity
(Letter size paper
which has been just
opened)

Approx. 100 sheets
(16 to 21 lb Bond (60 to 80 g/m²))*1

Print Speed (Letter
Plain Direct)*2

• MF4570dn
26 cpm
• MF4450
24 cpm

Output Resolution

600 dpi x 600 dpi

Gradation

256 gradations

Toner Cartridge

“Replacing Toner Cartridges“ (→P.8-6)

11-2

Direct 1:1 ± 1.0 %
Enlargement 1:4.00, 1:2.00, 1:1.29
Reduction 1:0.78, 1:0.64, 1:0.50, 1:0.25
Zoom 0.25 to 4.00, 1% increments

Actual paper capacity varies depending on the installation
environment and paper type to be used.
Speed when using Letter size Plain paper and printing the same
data continuously. Depending on the type, size, or feeding
direction of the paper, such as when using small size paper, print
speed may become slower. Also, operation may pause or become
slow to readjust the temperature or print quality of the machine,
when printing continuously.

Scanner Specifications
Scanner Specifications
Type

Color scanner

Maximum Scanning
Size

• Platen glass: 8 1/2” x 11 5/8”
(215.9 mm x 297 mm)
• Feeder: 8 1/2” x 14”
(215.9 mm x 355.6 mm)

Scanning Resolution

• Optical resolution
Platen glass: 600 x 600 dpi
Feeder: 300 x 300 dpi
• Software interpolation resolution
• 9600 dpi x 9600 dpi

Scanning Speed
(Letter, 300 x 300
dpi)*

• Platen glass
Grayscale: 3 seconds/sheet
Color: 15 seconds/sheet
• Feeder
Grayscale: 3 seconds/sheet
Color: 15 seconds/sheet

Host Interface

•
•
•
•

Operating System

• Windows 2000/XP/Vista/7
• Mac OS 10.4.9 or later (excluding Classic
environment)

Driver

•
•
•
•

100 Base-TX (Windows only)
10 Base-T (Windows only)
Hi-Speed USB
USB

Dialing System

•
•
•
•
•
•
•
•

Receiving System

• Automatic reception
• Remote reception by telephone (Default
ID: 25)

Report Output

• Send Results
• Transmission management report (Auto
output every 40 destinations)
• Receive Results

One-touch keys (4 destinations)
Coded dialing (100 destinations)
Group dialing (50 destinations)
Address book dialing
Regular dialing (with numeric keys)
Automatic redialing
Manual redialing
Sequential broadcast (114 destinations)

The Public Switched Telephone Network (PSTN) currently supports
28.8 Kbps modem speed or lower. However, this depends on the
telephone line condition.
Based on ITU-T Standard Chart No. 1, MMR standard mode.

Telephone Specifications
Telephone Specifications
Available Telephone

External telephone/External telephone with
built-in answering machine/Data modem

TWAIN
WIA 1.0 (Windows XP/Vista/7)
WIA 2.0 (Windows Vista/7)
ICA (Mac OS X 10.6.x)

* The communication time is not included.

Fax Specifications
Fax Specifications
Public Switched Telephone Network
(PSTN)*1

Communication
Mode

G3, Super G3

Data Compression
Type

MH, MR, MMR

Modem Speed

33.6 Kbps
Automatic Fallback

Transmission Speed

Approx. 3 seconds per page*2
(ECM-MMR, transmitting from the memory
at 33.6 Kbps)

Sending/Receiving
Memory

Maximum approx. 256 pages*2
(Total pages of transmission/reception)

Fax Resolution

•
•
•
•

(Normal): 200 dpi x 100 dpi
(Fine): 200 dpi x 200 dpi
(Photo): 200 dpi x 200 dpi
(Superfine): 200 dpi x 400 dpi

Appendix

Applicable Line

11-3

For Macintosh Users
In this manual, methods to operate in the Windows environment are explained as examples. To view how to use printer drivers or
utilities for Macintosh, see the following driver guides (PDF files) or driver help systems.
Function

Print function

Fax function

Scan function

Object
Installing the Printer Driver

• Starter Guide
• Printer Driver Guide

Printing

• Printer Driver Guide

Using each feature

• Printer Driver’s Help

Installing the Fax Driver

• Starter Guide
• Fax Driver Guide

Sending a fax

• Fax Driver Guide

Using each feature

• Fax Driver’s Help

Installing the Scanner Driver

• Starter Guide
• Scanner Driver Guide

Scanning (Setting the MF Toolbox or ScanGear MF)

• Scanner Driver Guide

● Accessory software
• Presto! PageManager

Displaying Driver Guides (PDF Files)
Double-click the following PDF files from the [Manuals] folder
on the provided CD-ROM.
● Printer Driver Guide
→ [GUIDE-UFR II-US.pdf ]

Reference in the e- Manual

● Scanner Driver Guide
→ [GUIDE-SCAN-US.pdf ]

Displaying a Driver’s Help System
You can use drivers’ help systems after you install each driver.
● Printer Driver’s Help
From the below panels in the [Print] dialog, click [
• [Basic] panel
• [Advanced] panel

Appendix

● Fax Driver’s Help
From the below panels in the [Print] dialog, click [
• [General Settings] panel
• [Special Features] panel
• [Cover Sheet] panel

Content of the e-Manual about Features
that Are Unavailable on the Macintosh
Among the features explained in the e-Manual, the followings
are unavailable on the Macintosh.
● Installing or uninstalling the e-Manual
Reference in the e- Manual

Reference in the e- Manual

“Installing the e-Manual”
“Uninstalling the e-Manual”

“User Software CD-ROM”

● Using WSD network

● Fax Driver Guide
→ [GUIDE-FAX-US.pdf ]

11-4

Reference

“Installing the MF Drivers Via the WSD
Network “

● Some print features

• Operating in the print server environment
• Watermark printing
• PageComposer (Combining and printing multiple files)
• Changing the halftone
• Adjusting the gamma value
For information on the features that are available on the
Macintosh, see the Printer Driver’s help system.
Reference in the e- Manual

“Print”

● Some scan features

• Scanning with a network connection
• Creating a “Searchable PDF”
For information on the features that are available on the
Macintosh, see the Scanner Driver Guide.
Reference in the e- Manual

“Scan”

E
Error Code ................................................................ 9-6

G
Group Dialing ......................................................... 5-2
Editing............................................................................... 5-9
Storing .............................................................................. 5-9

Appendix

H
Handling ................................................................... viii

11-5

L
LAN port ................................................................... 1-3

Appendix

O
One-Touch Keys ..................................................... 5-2
Editing............................................................................... 5-3
Storing .............................................................................. 5-3
Operation Panel ............................................ 1-2, 1-5
Output tray .............................................................. 1-2

11-6

S
Scan Functions ....................................................... 7-1
Scan Mode ............................................................... 1-6
Scanning area ......................................................... 1-2
Scanning Range ..................................................... 2-2
Selecting Print Side............................................ 2-16
Sequential Broadcast ........................................... 6-9

Sharpness
Copy ................................................................................... 3-7
Fax ....................................................................................... 6-3
Sleep Timer ........................................................... 1-10
Specifying Destinations ...................................... 6-4

U
USB port .................................................................... 1-3

11-7

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

CANON MARKETING JAPAN INC.

16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan

CANON U.S.A., INC.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

CANON EUROPA N.V.

Bovenkerkerweg, 59-61, 1185 XB Amstelveen, The Netherlands

CANON CHINA CO. LTD.

15F Jinbao Building No.89, Jinbao Street, Dongcheng District, Beijing 100005, PRC

CANON SINGAPORE PTE LTD

1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632

CANON AUSTRALIA PTY LTD

1 Thomas Holt Drive, North Ryde, Sydney NSW 2113, Australia

CANON GLOBAL WORLDWIDE SITES
http://www.canon.com/

FT5-3366 (010)

XXXXXXXXXX

PRINTED IN KOREA

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Author                          : CANON INC.
Create Date                     : 2011:03:23 14:23:17+09:00
Keywords                        : English
Modify Date                     : 2011:03:23 15:39:42+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2011:03:23 15:39:42+09:00
Creator Tool                    : Adobe InDesign CS4 (6.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 12364 bytes, use -b option to extract)
Instance ID                     : uuid:6ba50d74-1e17-44a7-9061-7d502f3bae90
Document ID                     : xmp.did:294DB5215754E011A21FE0B27678ABBC
Original Document ID            : xmp.did:EE8863ED7898DF11A54DD95242606E72
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:EE8863ED7898DF11A54DD95242606E72, xmp.iid:EF8863ED7898DF11A54DD95242606E72, xmp.iid:F08863ED7898DF11A54DD95242606E72, xmp.iid:3AAC62E88A98DF119883C09788575573, xmp.iid:8050EA968B98DF119883C09788575573, xmp.iid:0EBBF398AB98DF119F01937C2C2000D9, xmp.iid:3C8070ACC598DF119F01937C2C2000D9, xmp.iid:98C87252129BDF11B655B928234E0C6B, xmp.iid:FBCF7D53129BDF11B655B928234E0C6B, xmp.iid:FEA37FDAE09DDF11A4749FDD18921823, xmp.iid:FFA37FDAE09DDF11A4749FDD18921823, xmp.iid:00A47FDAE09DDF11A4749FDD18921823, xmp.iid:AA8DE506E29DDF11A4749FDD18921823, xmp.iid:43A7C9A40F9EDF11AA74CFBFA3F803D6, xmp.iid:25447677CF9EDF11BF48FE6FE9FD9A53, xmp.iid:7640C3DB88ABDF11953687A5A4C89D9C, xmp.iid:7840C3DB88ABDF11953687A5A4C89D9C, xmp.iid:FA5908E1DDBEDF118A079A7909A29C39, xmp.iid:FC5908E1DDBEDF118A079A7909A29C39, xmp.iid:4EB5F3DF79CFDF119C6ACC5B5A477C08, xmp.iid:2C87BC7296CFDF11B1BE8C6EA125FAF5, xmp.iid:2E87BC7296CFDF11B1BE8C6EA125FAF5, xmp.iid:D4E7339498CFDF11B1BE8C6EA125FAF5, xmp.iid:BF34079698CFDF11B1BE8C6EA125FAF5, xmp.iid:BAD6737D99CFDF11B1BE8C6EA125FAF5, xmp.iid:166A0F3233D1DF118005C8CF7533FBEB, xmp.iid:3D70B550D0D1DF118D18A1F6920C6318, xmp.iid:F018617ED4D1DF118D18A1F6920C6318, xmp.iid:01675B5C7753E011B068F415838E3CED, xmp.iid:5D71CACF8D53E011B068F415838E3CED, xmp.iid:DBEB6CE29653E011B068F415838E3CED, xmp.iid:284DB5215754E011A21FE0B27678ABBC, xmp.iid:294DB5215754E011A21FE0B27678ABBC, xmp.iid:2A4DB5215754E011A21FE0B27678ABBC, xmp.iid:BD8E0BEE6354E01198C9C1C66A3D3A82
History When                    : 2010:07:26 14:53:12+09:00, 2010:07:26 14:53:56+09:00, 2010:07:26 14:53:56+09:00, 2010:07:26 16:54:36+09:00, 2010:07:26 17:03:14+09:00, 2010:07:26 20:48:17+09:00, 2010:07:26 23:54:21+09:00, 2010:07:29 22:08:03+09:00, 2010:07:29 22:09:06+09:00, 2010:08:02 11:51:33+09:00, 2010:08:02 11:51:51+09:00, 2010:08:02 11:52:09+09:00, 2010:08:02 13:31:33+09:00, 2010:08:02 17:30:20+09:00, 2010:08:03 16:22:29+09:00, 2010:08:19 20:56:53+09:00, 2010:08:19 20:59:26+09:00, 2010:09:13 11:23:23+09:00, 2010:09:13 11:31:57+09:00, 2010:10:04 14:42:55+09:00, 2010:10:04 18:05:25+09:00, 2010:10:04 18:07:37+09:00, 2010:10:04 18:20:07+09:00, 2010:10:04 18:26:37+09:00, 2010:10:04 18:33:48+09:00, 2010:10:06 19:20:24+09:00, 2010:10:07 14:16:48+09:00, 2010:10:07 14:34:55+09:00, 2011:03:21 16:22:10+09:00, 2011:03:21 17:04:04+09:00, 2011:03:21 17:40:33+09:00, 2011:03:22 16:36:57+09:00, 2011:03:22 16:36:57+09:00, 2011:03:22 16:48:57+09:00, 2011:03:22 20:02:59+09:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /
Derived From Instance ID        : xmp.iid:284DB5215754E011A21FE0B27678ABBC
Derived From Document ID        : xmp.did:EE8863ED7898DF11A54DD95242606E72
Derived From Original Document ID: xmp.did:EE8863ED7898DF11A54DD95242606E72
Derived From Rendition Class    : default
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:3655260b-ede2-44d1-958a-1f152c5a1599, uuid:2966b966-2207-4170-8e3e-f17fc8eee7d8, uuid:2966b966-2207-4170-8e3e-f17fc8eee7d8, uuid:526bbb46-1ecb-452b-9d6c-116c99f13247, uuid:526bbb46-1ecb-452b-9d6c-116c99f13247, uuid:84453708-2eaf-41f6-8b8c-c9450b75503f, uuid:84453708-2eaf-41f6-8b8c-c9450b75503f, uuid:af0ab411-fb95-4a20-947c-d656dcf521a8, uuid:0e99e294-0085-401a-9a67-643dc5b8dc6b, uuid:fb38194c-d302-4bc7-8e15-638c085f4023, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:08fdbcd7-4cf4-44fa-93a7-0e54240fb7f4, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:4e5e67ce-be08-47d3-be06-a21938d6f816, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:6587ee65-a175-4509-a4eb-d8420345d99e, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:f45be3eb-9cba-4ad4-993d-e6b217c30c81, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:234e1630-31e3-4f75-bf66-f1431e748bea, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:5fedb43a-19b7-4610-ba86-dfdd03b4121f, uuid:7e12649d-15e1-4f05-bdb6-fd674558db88, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:d85e94bc-6a5d-4611-910a-3e65956ddaac, uuid:56af9378-0ea4-45c0-8342-763e01ea00a7, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:f25f05c9-fb23-4ba6-8f82-187a1b646ac1, uuid:b9e6c82f-04ef-42ad-8934-9af69192c9f2, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:2669f6b7-0849-4eab-86e6-2cc51f8f431d, uuid:ef1e7ad4-4e15-4a99-8cb3-63623405eb0a, uuid:fea217a7-9bf4-4566-b7c0-a9ee7aa38395, uuid:731f78a9-7ea5-418d-8bdb-ee2e81eae063, uuid:d4df0de3-7de8-4462-823e-3c590b740eef, uuid:ef746ce1-bbab-429f-83f7-0e8d063b066b, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:ad889637-b876-4874-8681-91fa8b3638f1, uuid:ad889637-b876-4874-8681-91fa8b3638f1, uuid:fd204dc1-5602-431e-97a2-a21ed6410932, uuid:3bb98084-8f5c-461b-b378-ea2008f46100, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:294585fe-66d6-4997-acd9-4fc170db103f, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:f9063f61-c868-41e5-bf0d-e48abf3a2764, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:95ffde9d-58f5-4abf-ad91-54c8bb3a29cc, uuid:51cc3797-23e9-4855-9864-1ab89d559789, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:9f067287-89e8-4348-8195-e07f0a7fb5be, uuid:f3b546ee-65a2-4ee9-be16-f3931b3fd622, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:6a785f11-f7cf-4679-bc0b-a7abef823232, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:2d74e157-997b-4c71-b03b-deb4d533bae4, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:219febc6-fefb-4f16-a5e0-4556c15b20b2, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:8db1a464-1552-4de5-94d3-9d50f1517fb5, uuid:d86ed45a-a98e-483a-9a86-243f079d321c, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:11b00f68-7849-4143-bc10-b3a21ae433f3, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:ab7ea157-4c6c-4ec7-b8a4-c8e76a1766b6, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:6a785f11-f7cf-4679-bc0b-a7abef823232, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:c3ae0227-f43f-430b-a87f-e17e8c2f50e9, uuid:3ca6dcd7-66f0-4bbe-828c-70056ea9362c, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:91992d78-3e67-48d9-a58d-d0ea98eeacb1, uuid:64aaff39-7fe3-46cf-9a24-fa284488800c, uuid:d61a89a9-4e4b-4382-9b2b-b10a43739181, uuid:62baceec-8dc3-4920-82f6-a63ead696287, uuid:3bb4bc0d-ebf3-46cb-8124-b6db5999b09f, uuid:60c59dbe-525c-463c-b20d-f4f7dbf501c7, uuid:127c31cc-d4d8-4e03-b54c-3cddbc8b14a0, uuid:6256aa42-651f-46f0-af78-b611f9d5f67d, uuid:668f7d1c-465f-4ea6-a6a0-620f09fb7979, uuid:38ec4852-ef8a-4792-9085-0706b75e952f, uuid:5c0398f7-301d-42b1-904c-3dbc8e45bfb4, uuid:7dcacf48-bc82-4a46-86ce-a9d3c195ee27, uuid:64aaff39-7fe3-46cf-9a24-fa284488800c, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:62baceec-8dc3-4920-82f6-a63ead696287, uuid:688d5884-8075-4152-aeb4-b877ef329229, uuid:62baceec-8dc3-4920-82f6-a63ead696287, uuid:243c0195-031f-49f9-9e69-5f63d426d259, uuid:6256aa42-651f-46f0-af78-b611f9d5f67d, uuid:747ba3c2-5a3e-42be-977b-e09b61110c01, uuid:6256aa42-651f-46f0-af78-b611f9d5f67d, uuid:96ef85a5-d14d-480e-b45e-d31418fa776c, uuid:6256aa42-651f-46f0-af78-b611f9d5f67d, uuid:da68130f-cfb8-4539-ab1a-899cb55a7899, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:9fbefa23-e268-4f64-a1ab-b8a276619437, uuid:3aea4af6-d634-43e3-a5c7-260ada6f1372, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1fffd9ec-3d7d-4fff-9007-07a9afef2013, uuid:219d3a43-36ca-4deb-924f-63419b647371, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:2d74e157-997b-4c71-b03b-deb4d533bae4, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:41bf5058-2441-45bf-824b-786af843bf98, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:71c54418-e041-4665-8bbb-e6d6001e0509, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:bd09903c-b87c-4236-b9c3-a06b50890a26, uuid:bd09903c-b87c-4236-b9c3-a06b50890a26, uuid:bd09903c-b87c-4236-b9c3-a06b50890a26, uuid:bd09903c-b87c-4236-b9c3-a06b50890a26, uuid:f7a814f4-5424-4d3f-8d3c-6a65425f0ec9, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:2d74e157-997b-4c71-b03b-deb4d533bae4, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:6e0ac9f6-c5b5-4bb3-b71f-773b318f1a7a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:2ca2ddb6-a7b9-4e36-b31c-129de5652e06, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:4d15b85b-755e-495e-8f5a-06f2c6b91acc, uuid:8c73910d-0482-490b-9e35-d3539824a567, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:0d6da110-0729-4e93-8162-f37fe66608a1, uuid:0d6da110-0729-4e93-8162-f37fe66608a1, uuid:e6bb467f-1986-4ae3-ba75-7897b96b49ac, uuid:e6bb467f-1986-4ae3-ba75-7897b96b49ac, uuid:8cb6cbb1-32b5-4471-968c-1a36a6a28474, uuid:47c8cd57-d2f2-4e6a-8814-a81f27a636ac, uuid:816f2378-6e17-40ff-9d71-ea8166690952, uuid:7368ca82-6c3e-4f5f-9c1d-b10931ade87f, uuid:4a7806b1-7cd8-430b-8288-59352b71e3e7, uuid:e3fdc399-98c6-475b-9c35-06cfa03e2f32, uuid:f9b9da82-5dc0-48aa-bb47-e548b70dd608, uuid:9a8989b3-b3be-4829-a336-803439b64bb4, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:eb110672-4220-4351-816c-832fcb407027, uuid:66305dc8-a502-4986-aa8d-54a0f8d10a09, uuid:e72a6ec7-e536-4295-833e-7be61e8c7478, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:019c6d15-b764-4f0a-828f-04bcf232eaf0, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:48fed323-94e2-45e1-904a-c169a2b284f6, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:a88af091-3dff-4328-8e0d-ad71fb66ac43, uuid:af2a121c-c09f-4bb2-b5c7-29225bed82e3, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:778e9b58-f7b8-4832-adfa-3abe3e2d42d8, uuid:57549786-a98b-4b5b-9a96-38703837ed3c, uuid:82177d6b-8312-45b4-9bfe-d28c745e8339, uuid:23cd1fb9-2d3d-4d98-ae13-4446d39993ce, uuid:ae34e591-60f3-4eff-ad29-24d99ebc682e, uuid:b163377d-3484-4ad7-9345-bfabb17b5e12, uuid:29f683fd-d5d7-4998-bc61-5e39da7828ff, uuid:3d356ffe-df24-40bd-9be4-e8bb8a15b4d8, uuid:894ca175-f76a-41a4-836c-fb29c027caef, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:dc66f4f6-b635-427e-b591-999814cf5479, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:24abe389-7000-4f1d-8c4a-1432b5827633, uuid:57549786-a98b-4b5b-9a96-38703837ed3c, uuid:82f97537-861b-4faf-9da2-9dfaf54ed649, uuid:2be8c6cd-629c-47ae-b80c-b8996de1b2aa, uuid:7336728b-c73c-4324-a6f9-67731857ab0b, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:fe9e01bb-1db0-4b4b-8af0-5f584cccfbe5, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:746954cd-defc-465b-9b50-bf47c6700500, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:941e8fc8-5c51-4076-9e70-85c4757fb476, uuid:85c89186-798b-4548-ac01-066355d5ec9a, uuid:0eb71d12-821e-4cd0-b206-015f459043a7, uuid:726b72d3-96e1-416b-b1de-c360e6f3ddf7, uuid:457683f3-3032-4961-8dc7-a476dc8bce93, uuid:726b72d3-96e1-416b-b1de-c360e6f3ddf7, uuid:457683f3-3032-4961-8dc7-a476dc8bce93, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:941e8fc8-5c51-4076-9e70-85c4757fb476, uuid:db2948df-4bef-403d-a7b3-054c1c6e8311, uuid:49e4edd0-7e81-4d1f-a365-6ae946b67e7b, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:7c632119-d065-488d-9bbd-a9c74b6c2faf, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:31b53c0d-ffe9-4f2b-8e15-409f756f3785, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:dd2926d6-5759-4041-ab6b-a9fb9b2172e6, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:4bbb6d64-56b6-44a3-accc-dc1eff331f11, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:f5b92fe4-2cd2-4b27-a562-a76a51de6b24, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:31b53c0d-ffe9-4f2b-8e15-409f756f3785, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:7adafbcd-57ba-4901-a816-6bf6f77ae024, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:65fb452f-6958-4cfb-ae98-78e2bc0ea492, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:85b509d1-3b3c-4108-aa0d-87a74c721c0a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:43ddabe6-ff1b-4f2c-91b5-b974f972d4e7, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:4bbb6d64-56b6-44a3-accc-dc1eff331f11, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:ea6c9f19-76b1-49fe-998f-9c1a72bd0289, uuid:e78a7d47-2c95-4f33-9717-9ce7013f445c, uuid:219d3a43-36ca-4deb-924f-63419b647371, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:28a76db3-6fa7-43fd-8304-e1e8a4e978b3, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:59345623-ab0a-4561-938e-c35e696b8d0f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:d19bc04e-c573-4e45-89ec-9c1bcbeeb216, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:0c0d7ce0-be8f-4e98-a87e-737ff69b8626, uuid:941e8fc8-5c51-4076-9e70-85c4757fb476, uuid:85c89186-798b-4548-ac01-066355d5ec9a, uuid:726b72d3-96e1-416b-b1de-c360e6f3ddf7, uuid:941e8fc8-5c51-4076-9e70-85c4757fb476, uuid:726b72d3-96e1-416b-b1de-c360e6f3ddf7, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:fd204dc1-5602-431e-97a2-a21ed6410932, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:fbe9802b-f022-4f63-8ddc-dc74f6ef939e, uuid:637c37e2-ae44-493b-981c-74f1ff9d1e1a, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:08fdbcd7-4cf4-44fa-93a7-0e54240fb7f4, uuid:08fdbcd7-4cf4-44fa-93a7-0e54240fb7f4, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:08fdbcd7-4cf4-44fa-93a7-0e54240fb7f4, uuid:15eac412-04cf-4104-bd81-05be1d18849a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:f29032a5-383b-4483-84c3-da4dcb1d8f57, uuid:704a51e9-d201-4386-b13e-56842130765a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:704a51e9-d201-4386-b13e-56842130765a, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:cabadfcf-53bd-4323-b1fc-8765465804a7, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:924e1a6c-4218-4ea3-a4e3-6d12f90175d3, uuid:74d30dbb-5179-4607-9bd9-d89e4b6148ef, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:a513e24b-e37f-4a60-bd18-6ba0b2ccdcd3, uuid:99d8ba32-0eaa-41eb-8709-728f0de77ae3, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:84152c70-b7c9-43ca-854f-0cab793fc894, uuid:60077342-8f47-472d-8425-b459254c400b, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:2ba378eb-71fa-4009-b7f1-e1097acecca0, uuid:cedd16a8-0ae5-45dc-a256-9781f18714b1, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c50681d1-753e-47de-b13f-373eb121b2e1, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:0927cc7a-bbcd-416f-91d2-ab177bf4d3ce, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:12c0ecad-bedb-421d-9e7b-6d639e66494a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:08077cd0-98c0-4e97-9aa9-da0f9da07f89, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:f1f6946a-295b-4444-86b7-ac858f69f8db, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:295baafa-848e-4dfd-b690-c65222300bce, uuid:112374c9-f04b-474e-b8dc-a3cf2a730f9b, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:30519b27-1286-46e2-86bb-25c2bcb5095f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:4e018527-4cfb-46dd-b733-7fe6d08c9e0d, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:828027f7-13c1-44e1-a5d8-7333665d9b04, uuid:b3860ee4-3dd5-490d-8eb5-427bd727b4c7, uuid:7afcefc7-f450-49d9-b310-53be22650afb, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1ce544aa-bac0-4967-8a3e-543943d6da85, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:4be26661-4fd2-46f1-a045-56e69bd282dc, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:fb620165-078e-492c-b377-34728305478d, uuid:28a13e7c-8826-4202-8a3a-d41194b2a4b1, uuid:76588957-0c0c-49cc-845e-f0ed128b5cf8, uuid:fe0498a7-d7dc-4edc-b8a7-2e585974f3af, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:cf3978c4-eaea-49f9-89b3-c5315fe6c552, uuid:5d4698ad-c0db-41a1-8dd6-e4787ec6aa66, uuid:a513e24b-e37f-4a60-bd18-6ba0b2ccdcd3, uuid:99d8ba32-0eaa-41eb-8709-728f0de77ae3, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:50f523f0-b7d8-47be-a75a-be123739e4a9, uuid:b3c798e5-a83f-40f4-8ed5-c998c7d7da5a, uuid:a5be86dd-d48d-4801-b1d0-bd8e90cb0e4d, uuid:cd925055-55f4-4706-bdce-a731babdffd6, uuid:9f6962ca-620b-4b5d-9c99-e5f6dccb5dff, uuid:fd204dc1-5602-431e-97a2-a21ed6410932, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:828027f7-13c1-44e1-a5d8-7333665d9b04, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:838484eb-0c3c-44f6-ae69-f81f61e27416, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:b3c798e5-a83f-40f4-8ed5-c998c7d7da5a, uuid:5248e1d5-6d06-4970-a17c-68f433a7b600, uuid:cd925055-55f4-4706-bdce-a731babdffd6, uuid:d4e4d1ea-025f-477b-859d-3188d524d8e8, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:fe2db499-d976-428a-826f-9cafb1113d83, uuid:219d3a43-36ca-4deb-924f-63419b647371, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:16776456-8a32-4d8b-bcec-6385369471f6, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:eab1496b-e99e-4892-9524-8fa3c1599f8c, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c38765da-0d4a-4c45-b5e2-8ab37fe70d39, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:08e4d33e-d1d5-49a4-a3cd-6376b9d6f281, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:ad889637-b876-4874-8681-91fa8b3638f1, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:ad889637-b876-4874-8681-91fa8b3638f1, uuid:ad889637-b876-4874-8681-91fa8b3638f1, uuid:fc9f493f-2edb-47af-a98d-a162386c527e, uuid:d08a051a-b103-497e-980d-a3948ef63af8, uuid:15785d72-7974-478e-ba5a-ad3b919a8d18, uuid:aaf74e4f-ca20-4b54-bba3-2847e8eca32e, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:dfc71ebc-5b01-4a26-9af0-65304959f161, uuid:aa3ed491-83aa-419a-a084-ce3ef7ef64ea, uuid:f8d5452b-74c3-426f-accd-4206f7b6caba, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:656493ba-0252-4f03-b30f-958b75da4422, uuid:f5439999-4780-4743-baf1-be490a29b8f6, uuid:a3b086d3-f681-419b-8401-21a1b10e1329, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:211aefed-3e41-4fc4-ad20-91be442fd41d, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:58ae14fe-2497-4028-a515-492ba79fe36e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:7397ff99-9341-47da-96f0-49281f44d155, uuid:192db5b2-5ab1-4590-8277-a4732c315e34, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:192db5b2-5ab1-4590-8277-a4732c315e34, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:cabadfcf-53bd-4323-b1fc-8765465804a7, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:08fdbcd7-4cf4-44fa-93a7-0e54240fb7f4, uuid:08fdbcd7-4cf4-44fa-93a7-0e54240fb7f4, uuid:08fdbcd7-4cf4-44fa-93a7-0e54240fb7f4, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:ad889637-b876-4874-8681-91fa8b3638f1, uuid:ad889637-b876-4874-8681-91fa8b3638f1, uuid:9690536e-dadb-47ec-90c8-1bcab76d22ec, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:e2a2c5fe-a547-471f-8213-196f192d6508, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:50c9afa9-7adf-45fa-a35b-9ea48936befd, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:0007930a-4bfb-4c19-80ec-26a651dc383c, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:8ea1fe18-666d-4b8c-a9de-2afa414145af, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:f6fc5447-ad75-4f0d-81b4-23cafa440b38, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:d8b41cad-0a99-4f1e-baaf-8c89c992fa39, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:11cfd5dc-34b5-46cb-84f6-1347d3851c5a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:8fbe7c22-6223-458a-bbdf-ee72d1eec2cc, uuid:23925c69-9f06-4bd8-a17e-e90888f6d55d, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:871c1351-1374-42bd-8673-77b8d06b36ac, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:b9c77af3-1fe1-4f12-9f0e-15749471f843, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:d85b7c90-1a02-4c4c-b0c1-4f38b420407d, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c7f63e68-3f61-4cb9-9f6b-b701b0bce405, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:0a8f98e0-402e-45a2-a986-705c5ab1ef20, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:624bf656-90a6-4c55-bd16-471b77a1ed66, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:361516ad-8409-4f09-ac1c-6262eea8a765, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:d85b7c90-1a02-4c4c-b0c1-4f38b420407d, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:11197360-b517-4ce4-8612-a52aebc4c4ab, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:0a8f98e0-402e-45a2-a986-705c5ab1ef20, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:e9d9b96e-353e-4478-b58f-e5c6ad1a3c30, uuid:219febc6-fefb-4f16-a5e0-4556c15b20b2, uuid:7d1d8c0a-2d32-4802-be2a-ad95ae55be8d, uuid:18f6bd7c-b68e-4691-91d3-1059049d01bb, uuid:b3be366e-6b6d-466b-bce2-c959b3f494f0, uuid:575fe213-d539-4ab4-8d83-cb599849f239, uuid:189814cc-960b-4d5a-9a5a-25399328bcef, uuid:023832ac-e089-4965-9876-ab56b272733b, uuid:9690536e-dadb-47ec-90c8-1bcab76d22ec, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:905ee105-b5e6-4f42-acb0-866964dfe301, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:89d99eb2-33c0-4cc3-a8cc-3577b196da17, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:0007930a-4bfb-4c19-80ec-26a651dc383c, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:2d8d393e-a79a-4a90-9201-5b98884897db, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:d8b41cad-0a99-4f1e-baaf-8c89c992fa39, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:11cfd5dc-34b5-46cb-84f6-1347d3851c5a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:0030171d-b83d-452e-bc95-a4cb768a7bd8, uuid:23925c69-9f06-4bd8-a17e-e90888f6d55d, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:871c1351-1374-42bd-8673-77b8d06b36ac, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:a6fd4ade-a006-4f58-afa6-c1d6b05e3422, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:9e572f5c-adac-451f-b8ce-cfb2faf3ae1c, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:860c006f-09e5-45c7-84fe-29524a4af3a5, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:048a13a9-bd5d-4f1b-b8f3-73bdb8d445ef, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c7f63e68-3f61-4cb9-9f6b-b701b0bce405, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:2635b81c-5082-424f-bca5-b1f5e4633b65, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:cb7e8816-c4cc-4177-aa8c-c20bc6b96da7, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:b5be977b-1431-4f25-a7b6-85c6100e72ac, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:048a13a9-bd5d-4f1b-b8f3-73bdb8d445ef, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:11197360-b517-4ce4-8612-a52aebc4c4ab, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:2635b81c-5082-424f-bca5-b1f5e4633b65, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:e9d9b96e-353e-4478-b58f-e5c6ad1a3c30, uuid:219febc6-fefb-4f16-a5e0-4556c15b20b2, uuid:7d1d8c0a-2d32-4802-be2a-ad95ae55be8d, uuid:18f6bd7c-b68e-4691-91d3-1059049d01bb, uuid:850a78dd-bb60-4e46-a4e4-a6fe0e7b8e87, uuid:96355292-5f05-49c6-9a5f-654f5fab64bc, uuid:9cd35acb-426e-4eb3-920b-d5d2cd30595c, uuid:38c9a97e-b4cb-4699-a055-54f318b7e3e3, uuid:50456bc9-3380-4237-9b80-80fdf92fe703, uuid:9690536e-dadb-47ec-90c8-1bcab76d22ec, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:fc8af265-a86e-4036-83ac-8a426a0081ac, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:8ec3d97e-b12f-4ac6-bffa-c27f5b8352b4, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:50c9afa9-7adf-45fa-a35b-9ea48936befd, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:ddd4d5f9-88c0-4ca7-87fd-32f31a383877, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:445bfa86-44c8-4fc9-afdf-af58a016ce4a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:6b0c8150-a30f-4a17-8461-24bc7669fb29, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:a3caa0c3-1380-4b08-9ec9-8b92246cd010, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:6f4834d1-f41d-4fb0-8caf-3c309adaf863, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:cf61204d-6716-478c-8270-7373fa26146c, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:4d5da13f-58a8-4370-95db-65782fb0878a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:5c558244-9fb7-4261-8fd1-ddfa3641a515, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:ffd68661-5f6d-4aa1-9aec-8e5f1deaa058, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:87b19ced-6579-4402-b202-879ed756827d, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c7f63e68-3f61-4cb9-9f6b-b701b0bce405, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:796c020c-1290-4177-a005-b93a86a2b3a9, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:dd178b47-4c45-43de-847e-af8c3966c031, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:038075b9-0378-4276-b966-3bedd3bc170a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:dce3969a-089a-46ad-a79e-830aea417704, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:295e976e-2e4b-49b1-bc41-e904c49a1514, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:fe3fe3d0-f9b0-46a1-b482-497e3e57d9f7, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c7f63e68-3f61-4cb9-9f6b-b701b0bce405, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:b052fa00-3612-4af1-8802-29ff2606e84a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:d23b68a5-475c-42f1-8bc4-274a43a44cd5, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:17482e44-b6e6-4a6c-869a-bd9bb6e0b376, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:e4a43160-2932-42b0-8e1a-7093bd9b5f97, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:e6dfbee0-214a-4c7a-9cbe-230e7bcce3a3, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:ffd68661-5f6d-4aa1-9aec-8e5f1deaa058, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:37dfb2cb-3be7-4731-b1b7-0c81d34b9ff6, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:c7f63e68-3f61-4cb9-9f6b-b701b0bce405, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:796c020c-1290-4177-a005-b93a86a2b3a9, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:50cc138b-7651-4956-b3fb-4ce5359b8ac3, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:f9f62209-b697-4aaf-8f7a-5afe111de329, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:f13fc7bf-c9aa-45f1-9db2-364916e58380, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1fc41ca7-1abf-4123-8809-8f61ff68639b, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:11197360-b517-4ce4-8612-a52aebc4c4ab, uuid:bd2a7c3d-1d4f-48ce-848f-033cdaf302d2, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:b052fa00-3612-4af1-8802-29ff2606e84a, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:e9d9b96e-353e-4478-b58f-e5c6ad1a3c30, uuid:219febc6-fefb-4f16-a5e0-4556c15b20b2, uuid:7d1d8c0a-2d32-4802-be2a-ad95ae55be8d, uuid:18f6bd7c-b68e-4691-91d3-1059049d01bb, uuid:b3be366e-6b6d-466b-bce2-c959b3f494f0, uuid:575fe213-d539-4ab4-8d83-cb599849f239, uuid:5bff0e1e-6957-4c9b-a578-87e83cb35679, uuid:a606f66c-6690-4358-8ad3-01a1abe6fd82, uuid:3461dbae-e015-42a4-95a3-ded1dae6104c, uuid:bea5410b-652e-43cf-ab4c-cd3539fc5355, uuid:6d226194-b3e9-49bc-8a3c-54ed74e13667, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:637c37e2-ae44-493b-981c-74f1ff9d1e1a, uuid:45bd23f9-8dee-429a-8af0-0d87f0efe460, uuid:3def4a40-e21a-4abb-893a-8810e702281a, uuid:83abd4f5-7abd-46d5-939b-13909c88146d, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:a513e24b-e37f-4a60-bd18-6ba0b2ccdcd3, uuid:99d8ba32-0eaa-41eb-8709-728f0de77ae3, uuid:a513e24b-e37f-4a60-bd18-6ba0b2ccdcd3, uuid:99d8ba32-0eaa-41eb-8709-728f0de77ae3, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:537b3e9f-a8e9-44e6-896a-2dad1a47bfa2, uuid:96c275c8-a6b4-4c25-af80-3c8072aa23bc, uuid:91992d78-3e67-48d9-a58d-d0ea98eeacb1, uuid:64aaff39-7fe3-46cf-9a24-fa284488800c, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:74f5e770-dfc2-47aa-9c9e-f4dacf0d925a, uuid:c9fa5f76-722c-4e9f-a299-82e8b3bc6cc7, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:7db54ba1-ff49-42a4-aa05-2a6967ef9204, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:fe2db499-d976-428a-826f-9cafb1113d83, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:fe2db499-d976-428a-826f-9cafb1113d83, uuid:8c73910d-0482-490b-9e35-d3539824a567, uuid:74f5e770-dfc2-47aa-9c9e-f4dacf0d925a, uuid:c9fa5f76-722c-4e9f-a299-82e8b3bc6cc7, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:7db54ba1-ff49-42a4-aa05-2a6967ef9204, uuid:8c73910d-0482-490b-9e35-d3539824a567, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:1a2b9587-0b18-429d-8230-2a14eea5f8ce, uuid:9cde0147-d6a2-477f-aed7-36aca59743f9, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:fe2db499-d976-428a-826f-9cafb1113d83, uuid:96c275c8-a6b4-4c25-af80-3c8072aa23bc, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:72bcddac-0106-4f1c-866d-b30995ee7bab, uuid:102ed084-0b7e-4c24-bc03-20bb546bb2b2, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:5999c71c-2b69-4e91-ad40-89d50a91134f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:3d3feca1-c99a-40ea-8919-25f9d98b4e83, uuid:b569fe21-628d-48e3-957a-8c7ea56ff014, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:6384e939-2e17-4a1d-9709-17228e25408c, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:c22a05eb-1e4c-42cf-9923-a096465f1f1d, uuid:ad889637-b876-4874-8681-91fa8b3638f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:6d288fdc-92b5-4522-9268-4e6ca0fb117b, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:ed8d89a9-3f98-4503-bba2-57c3177c846f, uuid:91992d78-3e67-48d9-a58d-d0ea98eeacb1, uuid:6a1702cf-431e-4bc9-85b1-0fba823273ee, uuid:148a3b6d-0423-48d3-a281-3b18bf3e5e1c, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:5d004ef6-5d99-41c7-84bd-5edecca49911, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:5382a3db-e579-44e8-a046-5368a089efa2, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:6de38062-e9e2-4379-bc63-cbae1b249c79, uuid:17c5651d-e658-4ba7-bfd8-16b4346caa9f, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:cf2e59ca-23a6-40d1-9c9a-176a9e3db3bf, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:fa1ee15e-c243-4455-8e60-fd7f4f1f9541, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:74f5e770-dfc2-47aa-9c9e-f4dacf0d925a, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:d7330684-31e9-4c0a-b902-33d79d0f40f8, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:0befdb8d-a716-4c19-936b-d9876ea3fe83, uuid:a7545383-372e-42f4-a8e6-87b64e513acb, uuid:1374bdb0-d815-47cc-a017-5a592394d83b, uuid:763eff79-db60-4f7e-a760-6051d0e76915, uuid:5e5c3b44-b3aa-4856-b3eb-c636d0418e72, uuid:e43cd7e7-cebe-42e5-a333-5e103feacec7, uuid:d301c06a-fd3c-4cb6-9afe-ed92c27cfc22, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:95ffde9d-58f5-4abf-ad91-54c8bb3a29cc, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:f9568356-e02c-4144-abc4-827ca2a4aa8e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6, uuid:d301c06a-fd3c-4cb6-9afe-ed92c27cfc22, uuid:e010ce69-2a73-4757-80c4-e7c515a1d96f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:95ffde9d-58f5-4abf-ad91-54c8bb3a29cc, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:f9568356-e02c-4144-abc4-827ca2a4aa8e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:112e8e6e-6b76-4dc2-a210-14a1820b642e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:85fdaa08-934d-4c5d-aab9-43ef3f5f2e85, uuid:a8c8e1ad-3b9f-4d7a-8014-2d4407c2a551, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:3e02b7fe-a1e1-4b56-b507-b624aacc6b3d, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:14a948a0-10e0-4810-adc9-e939fcd1e009, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:50b9728f-430c-45b1-b011-ee2389044c97, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:da35fb3c-e2fd-4800-a8cb-746198e1cdfe, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:eca78760-3fb3-4204-beeb-e47bc8ca68f1, uuid:5999c71c-2b69-4e91-ad40-89d50a91134f, uuid:10ca05be-2b4e-49e5-aa10-deb54c8227b3, uuid:211aefed-3e41-4fc4-ad20-91be442fd41d, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:3e02b7fe-a1e1-4b56-b507-b624aacc6b3d, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:8ff0eed2-dfa9-4ec6-a189-43c100234a3e, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:1d122582-256e-4c95-a0eb-af7dfff4023a, uuid:0904dfc5-0a04-49dc-b28c-d5768905dbfd, uuid:09329876-8a17-4f26-aafa-176e2f28d80a, uuid:a6c9f670-352a-4dd1-b7ee-0af32d08a891, uuid:bed25260-105f-4b88-bb76-e701c02b695f, uuid:4678ce4f-e88a-4e4f-9570-702a821c8e6e, uuid:cabadfcf-53bd-4323-b1fc-8765465804a7, uuid:c2c5d324-fbaa-4267-ae2d-7b0ee047a15f, uuid:fe041bf3-5c31-4d52-95e8-d4eab701f5f6
Manifest Reference Document ID  : xmp.did:2506D9ED53CFDF119971FEA7143982DB, xmp.did:2706D9ED53CFDF119971FEA7143982DB, xmp.did:2706D9ED53CFDF119971FEA7143982DB, xmp.did:5F02E7837AABDF11A75FD89E03D9D76B, xmp.did:5F02E7837AABDF11A75FD89E03D9D76B, xmp.did:2806D9ED53CFDF119971FEA7143982DB, xmp.did:2806D9ED53CFDF119971FEA7143982DB, xmp.did:E96A32E1DBD1DF1187AC8BFA527A8322, xmp.did:CB4ACCA7B4D1DF11BF3BDE6DA457EA44, xmp.did:CC4ACCA7B4D1DF11BF3BDE6DA457EA44, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:959F8EF8929BDF11B5AFA8DA859ACE3D, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:2ACA9847B201DF11929EADD0693DAE72, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:0DFBB7F3A101DF11929EADD0693DAE72, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:D50158CE8669DF119B09DB68B666E3CB, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:CCA9A8143F15DF11B312DD1E915B2093, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:E0D3A48F2793DF11879DAB5EDAE6F5F8, xmp.did:12FBB7F3A101DF11929EADD0693DAE72, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, uuid:2397774AD228DB11B97F9DE4CC6C2CF3, xmp.did:419A527F81FEDE11B2FAEB3BB64023F6, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:9D8891094880DF1182A4C9564CAB6D58, xmp.did:F52DBA5BA601DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:F82DBA5BA601DF11929EADD0693DAE72, xmp.did:F92DBA5BA601DF11929EADD0693DAE72, xmp.did:FC2DBA5BA601DF11929EADD0693DAE72, xmp.did:62770380A701DF11929EADD0693DAE72, xmp.did:63770380A701DF11929EADD0693DAE72, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:6BEB8B77C5B3DE11BFA9F52E6A90A153, uuid:6BEB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:67770380A701DF11929EADD0693DAE72, xmp.did:1FD5968F9059DF11ABEDECE9E8BFAF83, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B2E46123D467DF11B3C6C278CE996141, xmp.did:68770380A701DF11929EADD0693DAE72, xmp.did:665DA65B1E57DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B4E46123D467DF11B3C6C278CE996141, xmp.did:69770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:66CC57717A43DF11AB6AE6B383566660, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:9A9459118205DF119037D3337A64BF2A, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:8B78FC21A243DF119072897C9DE0DEFE, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:6A770380A701DF11929EADD0693DAE72, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:9B02B37C7EBADF11ACC3924B81BEA6D6, xmp.did:E805CA9BCC43DF119072897C9DE0DEFE, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:F975133F8605DF11BB34BE6268896BF8, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:ECD48359D49DDF119E62BA504485CF98, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:9A9459118205DF119037D3337A64BF2A, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:B4E122D67C43DF11AB6AE6B383566660, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:81E89993A801DF11929EADD0693DAE72, xmp.did:F6274B06A901DF11929EADD0693DAE72, xmp.did:78E89993A801DF11929EADD0693DAE72, xmp.did:79E89993A801DF11929EADD0693DAE72, xmp.did:7AE89993A801DF11929EADD0693DAE72, xmp.did:7BE89993A801DF11929EADD0693DAE72, xmp.did:7CE89993A801DF11929EADD0693DAE72, xmp.did:7DE89993A801DF11929EADD0693DAE72, xmp.did:7EE89993A801DF11929EADD0693DAE72, xmp.did:7FE89993A801DF11929EADD0693DAE72, xmp.did:80E89993A801DF11929EADD0693DAE72, xmp.did:82E89993A801DF11929EADD0693DAE72, xmp.did:F6274B06A901DF11929EADD0693DAE72, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:79E89993A801DF11929EADD0693DAE72, xmp.did:5AEBDA7E2057DF118250BB5292FA0F8F, xmp.did:79E89993A801DF11929EADD0693DAE72, xmp.did:5BEBDA7E2057DF118250BB5292FA0F8F, xmp.did:7DE89993A801DF11929EADD0693DAE72, xmp.did:5DEBDA7E2057DF118250BB5292FA0F8F, xmp.did:7DE89993A801DF11929EADD0693DAE72, xmp.did:5CEBDA7E2057DF118250BB5292FA0F8F, xmp.did:7DE89993A801DF11929EADD0693DAE72, xmp.did:5EEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B43204DF6653E0118DA9DE698F7F86A8, xmp.did:031DB5C8853EE011A31BEB27364B6607, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:021DB5C8853EE011A31BEB27364B6607, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:8B78FC21A243DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:4AE7B192B367DF119E30F23D5EFFFDBA, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:877094AA6745DF1186B7B1E9349DF702, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:66770380A701DF11929EADD0693DAE72, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:F8274B06A901DF11929EADD0693DAE72, xmp.did:F8274B06A901DF11929EADD0693DAE72, xmp.did:F8274B06A901DF11929EADD0693DAE72, xmp.did:F8274B06A901DF11929EADD0693DAE72, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:8B78FC21A243DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:8C78FC21A243DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:887094AA6745DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:4C5357C67043DF11AB6AE6B383566660, xmp.did:2DCA9847B201DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:66770380A701DF11929EADD0693DAE72, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:52ABF92B9285DF1183B9F64532075DB9, xmp.did:52ABF92B9285DF1183B9F64532075DB9, xmp.did:382365397FFEDE11B2FAEB3BB64023F6, xmp.did:382365397FFEDE11B2FAEB3BB64023F6, xmp.did:0500929D3678DF118EC1A61AB9482403, xmp.did:3A2365397FFEDE11B2FAEB3BB64023F6, xmp.did:FC274B06A901DF11929EADD0693DAE72, xmp.did:A9271C83A110DF11B2B7B5ADD0841C51, xmp.did:FE274B06A901DF11929EADD0693DAE72, xmp.did:FF274B06A901DF11929EADD0693DAE72, xmp.did:00284B06A901DF11929EADD0693DAE72, xmp.did:2AD8DE58AC01DF11929EADD0693DAE72, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:2BD8DE58AC01DF11929EADD0693DAE72, xmp.did:2CD8DE58AC01DF11929EADD0693DAE72, xmp.did:2DD8DE58AC01DF11929EADD0693DAE72, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:D8E692F281FEDE11B2FAEB3BB64023F6, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:372365397FFEDE11B2FAEB3BB64023F6, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:33D8DE58AC01DF11929EADD0693DAE72, xmp.did:34D8DE58AC01DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:485E48FEAC01DF11929EADD0693DAE72, xmp.did:445E48FEAC01DF11929EADD0693DAE72, xmp.did:455E48FEAC01DF11929EADD0693DAE72, xmp.did:465E48FEAC01DF11929EADD0693DAE72, xmp.did:495E48FEAC01DF11929EADD0693DAE72, xmp.did:4A5E48FEAC01DF11929EADD0693DAE72, xmp.did:4B5E48FEAC01DF11929EADD0693DAE72, xmp.did:4C5E48FEAC01DF11929EADD0693DAE72, xmp.did:4E5E48FEAC01DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:7CABE4431D3EDF119328BCEFFADB3302, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:7DABE4431D3EDF119328BCEFFADB3302, xmp.did:445E48FEAC01DF11929EADD0693DAE72, xmp.did:C3DCF2D4F33DDF119328BCEFFADB3302, xmp.did:7EABE4431D3EDF119328BCEFFADB3302, xmp.did:C4DCF2D4F33DDF119328BCEFFADB3302, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:63EB8B77C5B3DE11BFA9F52E6A90A153, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:B133E192DC15DF11B344F484F2ACA068, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:D9E692F281FEDE11B2FAEB3BB64023F6, xmp.did:52E29A1DAE01DF11929EADD0693DAE72, xmp.did:56E29A1DAE01DF11929EADD0693DAE72, xmp.did:53E29A1DAE01DF11929EADD0693DAE72, xmp.did:57E29A1DAE01DF11929EADD0693DAE72, xmp.did:53E29A1DAE01DF11929EADD0693DAE72, xmp.did:57E29A1DAE01DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:D9E692F281FEDE11B2FAEB3BB64023F6, xmp.did:5AE29A1DAE01DF11929EADD0693DAE72, xmp.did:5CE29A1DAE01DF11929EADD0693DAE72, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D84B72A55D5ADF11B8FBF11FE8E7C802, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:B6C0E0109E43DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:B7C0E0109E43DF119072897C9DE0DEFE, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D84B72A55D5ADF11B8FBF11FE8E7C802, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:114249F0D445DF118445917F08B0470D, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B9C0E0109E43DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:BAC0E0109E43DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:49E7B192B367DF119E30F23D5EFFFDBA, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B7C0E0109E43DF119072897C9DE0DEFE, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:7250EB5B7FFEDE11B2FAEB3BB64023F6, xmp.did:7350EB5B7FFEDE11B2FAEB3BB64023F6, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:872B57699843DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:20728354A943DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:21728354A943DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:FB5C387B6845DF1186B7B1E9349DF702, xmp.did:D9E692F281FEDE11B2FAEB3BB64023F6, xmp.did:52E29A1DAE01DF11929EADD0693DAE72, xmp.did:53E29A1DAE01DF11929EADD0693DAE72, xmp.did:D9E692F281FEDE11B2FAEB3BB64023F6, xmp.did:53E29A1DAE01DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:67770380A701DF11929EADD0693DAE72, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:31CA9847B201DF11929EADD0693DAE72, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:959F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:959F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:959F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:0664D37BFD48DF11A7BAB96648C71030, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:13DA8828B643DF119072897C9DE0DEFE, xmp.did:15DA8828B643DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:15DA8828B643DF119072897C9DE0DEFE, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED1414D16B44DF11AC92DFD421552117, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:B8E46123D467DF11B3C6C278CE996141, xmp.did:19DA8828B643DF119072897C9DE0DEFE, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:F55EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:EC5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:137879216468DF11BCE894F21D3794EE, xmp.did:EA05CA9BCC43DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:147879216468DF11BCE894F21D3794EE, xmp.did:C40546947FFEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:A271863CAB58DF11887DC8D8D25D6E2F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:EC05CA9BCC43DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:EE05CA9BCC43DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:EF05CA9BCC43DF119072897C9DE0DEFE, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:B86F0369FF85DF118223A9433538EC69, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:799C21BA836DDF11BA21EF387E3A897F, xmp.did:059F541AD143DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:18D5968F9059DF11ABEDECE9E8BFAF83, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:035D387B6845DF1186B7B1E9349DF702, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:789C21BA836DDF11BA21EF387E3A897F, xmp.did:089F541AD143DF119072897C9DE0DEFE, xmp.did:4AFB4E2A6945DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:099F541AD143DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:0A9F541AD143DF119072897C9DE0DEFE, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:779C21BA836DDF11BA21EF387E3A897F, xmp.did:49FB4E2A6945DF1186B7B1E9349DF702, xmp.did:E733FAD64016DF11ACB4AACCA543F788, xmp.did:E833FAD64016DF11ACB4AACCA543F788, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:114D88B7C867DF119E30F23D5EFFFDBA, xmp.did:03A12DABD443DF119072897C9DE0DEFE, xmp.did:F55EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:EC5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:ADB443B382FEDE11B2FAEB3BB64023F6, xmp.did:B233E192DC15DF11B344F484F2ACA068, xmp.did:ACB443B382FEDE11B2FAEB3BB64023F6, xmp.did:5AAB1FE5E515DF11B344F484F2ACA068, xmp.did:67770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:789C21BA836DDF11BA21EF387E3A897F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:00A12DABD443DF119072897C9DE0DEFE, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:ADB443B382FEDE11B2FAEB3BB64023F6, xmp.did:5AAB1FE5E515DF11B344F484F2ACA068, xmp.did:ACB443B382FEDE11B2FAEB3BB64023F6, xmp.did:5AAB1FE5E515DF11B344F484F2ACA068, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:939F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:1ADA8828B643DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:04A12DABD443DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:1BD5968F9059DF11ABEDECE9E8BFAF83, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:1AD5968F9059DF11ABEDECE9E8BFAF83, xmp.did:66770380A701DF11929EADD0693DAE72, uuid:6BEB8B77C5B3DE11BFA9F52E6A90A153, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:6BEB8B77C5B3DE11BFA9F52E6A90A153, uuid:6BEB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:F06E59A7926FDF11AA6FA386B35D34CA, xmp.did:894FA90D8485DF1183B9F64532075DB9, xmp.did:8A4FA90D8485DF1183B9F64532075DB9, xmp.did:8B4FA90D8485DF1183B9F64532075DB9, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:5D144C65C970DF11A9D19C2C001729A8, xmp.did:8C4FA90D8485DF1183B9F64532075DB9, xmp.did:F877CEA78585DF1183B9F64532075DB9, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:F977CEA78585DF1183B9F64532075DB9, xmp.did:F76E59A7926FDF11AA6FA386B35D34CA, xmp.did:F86E59A7926FDF11AA6FA386B35D34CA, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:6E4B1E099B59DF11ABEDECE9E8BFAF83, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:62C19B7C7344DF11AC92DFD421552117, xmp.did:63C19B7C7344DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:63C19B7C7344DF11AC92DFD421552117, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED1414D16B44DF11AC92DFD421552117, xmp.did:66770380A701DF11929EADD0693DAE72, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:959F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:959F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:959F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:66770380A701DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, uuid:6BEB8B77C5B3DE11BFA9F52E6A90A153, uuid:6BEB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:68770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B6E122D67C43DF11AB6AE6B383566660, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B7E122D67C43DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DFF5C3926545DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:BDE122D67C43DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DDF5C3926545DF1186B7B1E9349DF702, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:60EBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:61EBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D7F5C3926545DF1186B7B1E9349DF702, xmp.did:62EBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:63EBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DCF5C3926545DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBF5C3926545DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:BAE122D67C43DF11AB6AE6B383566660, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DAF5C3926545DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D9F5C3926545DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:C81989016645DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBF5C3926545DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:C874CB299043DF11AB6AE6B383566660, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DAF5C3926545DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:6F4B1E099B59DF11ABEDECE9E8BFAF83, xmp.did:6A770380A701DF11929EADD0693DAE72, xmp.did:90EB58676B6FDF11AA6FA386B35D34CA, xmp.did:72040B51A06FDF11AA6FA386B35D34CA, xmp.did:C8B50815736FDF11AA6FA386B35D34CA, xmp.did:B2DDC006766FDF11AA6FA386B35D34CA, xmp.did:B3DDC006766FDF11AA6FA386B35D34CA, xmp.did:B4DDC006766FDF11AA6FA386B35D34CA, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:68770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:897EDA549B70DF119246CF1D091F2859, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:BCE122D67C43DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DFF5C3926545DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DF611C0A834EDF11926CBD094A994A8F, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:60EBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:61EBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CF1989016645DF1186B7B1E9349DF702, xmp.did:62EBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:63EBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CE1989016645DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:BEE122D67C43DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CD1989016645DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:CC1989016645DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:BAE122D67C43DF11AB6AE6B383566660, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CB1989016645DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CA1989016645DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:C91989016645DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:CC1989016645DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:C874CB299043DF11AB6AE6B383566660, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CB1989016645DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:6F4B1E099B59DF11ABEDECE9E8BFAF83, xmp.did:6A770380A701DF11929EADD0693DAE72, xmp.did:90EB58676B6FDF11AA6FA386B35D34CA, xmp.did:72040B51A06FDF11AA6FA386B35D34CA, xmp.did:B5DDC006766FDF11AA6FA386B35D34CA, xmp.did:B6DDC006766FDF11AA6FA386B35D34CA, xmp.did:B7DDC006766FDF11AA6FA386B35D34CA, xmp.did:B8DDC006766FDF11AA6FA386B35D34CA, uuid:65EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:68770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:047189516745DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:040D33FA80FEDE11B2FAEB3BB64023F6, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B7E122D67C43DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:037189516745DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:C974CB299043DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:027189516745DF1186B7B1E9349DF702, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:CA74CB299043DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CB74CB299043DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:017189516745DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:007189516745DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:FF7089516745DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:FE7089516745DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:FD7089516745DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:BAE122D67C43DF11AB6AE6B383566660, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CE74CB299043DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D21989016645DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D11989016645DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B6E46123D467DF11B3C6C278CE996141, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CD74CB299043DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D01989016645DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:BAE122D67C43DF11AB6AE6B383566660, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B7E46123D467DF11B3C6C278CE996141, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:867094AA6745DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D074CB299043DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:857094AA6745DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:714B1E099B59DF11ABEDECE9E8BFAF83, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:FE7089516745DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:077189516745DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:BAE122D67C43DF11AB6AE6B383566660, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:CE74CB299043DF11AB6AE6B383566660, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:067189516745DF1186B7B1E9349DF702, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:0B4E9E099589DF11861B8FD6A3F27371, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:0C4E9E099589DF11861B8FD6A3F27371, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:057189516745DF1186B7B1E9349DF702, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:C874CB299043DF11AB6AE6B383566660, xmp.did:5FEBDA7E2057DF118250BB5292FA0F8F, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B7E46123D467DF11B3C6C278CE996141, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:6F4B1E099B59DF11ABEDECE9E8BFAF83, xmp.did:6A770380A701DF11929EADD0693DAE72, xmp.did:90EB58676B6FDF11AA6FA386B35D34CA, xmp.did:72040B51A06FDF11AA6FA386B35D34CA, xmp.did:C8B50815736FDF11AA6FA386B35D34CA, xmp.did:B2DDC006766FDF11AA6FA386B35D34CA, xmp.did:B9DDC006766FDF11AA6FA386B35D34CA, xmp.did:BADDC006766FDF11AA6FA386B35D34CA, xmp.did:BBDDC006766FDF11AA6FA386B35D34CA, xmp.did:8A7EDA549B70DF119246CF1D091F2859, xmp.did:64770380A701DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:68770380A701DF11929EADD0693DAE72, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:31CA9847B201DF11929EADD0693DAE72, xmp.did:2D8B3D778582DF11A741DEBB3CB77CAD, xmp.did:9767ED858582DF119FECFF42225D4DEC, xmp.did:9867ED858582DF119FECFF42225D4DEC, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:F55EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:EC5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:F55EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:EC5EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:92815D7EFA15DF11A924A3FCDE2F927C, xmp.did:91815D7EFA15DF11A924A3FCDE2F927C, xmp.did:81E89993A801DF11929EADD0693DAE72, xmp.did:F6274B06A901DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:734B1E099B59DF11ABEDECE9E8BFAF83, xmp.did:07A12DABD443DF119072897C9DE0DEFE, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:08A12DABD443DF119072897C9DE0DEFE, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:939F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:939F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:2DCA9847B201DF11929EADD0693DAE72, xmp.did:734B1E099B59DF11ABEDECE9E8BFAF83, xmp.did:07A12DABD443DF119072897C9DE0DEFE, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:08A12DABD443DF119072897C9DE0DEFE, xmp.did:2DCA9847B201DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:E5FA43759A9BDF1196BECD284F8C108F, xmp.did:F7274B06A901DF11929EADD0693DAE72, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:939F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:91815D7EFA15DF11A924A3FCDE2F927C, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED5EA85F81FEDE11B2FAEB3BB64023F6, uuid:cd5e9098-8eb8-46f2-bcfe-93ad909a9a36, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:51FB4E2A6945DF1186B7B1E9349DF702, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:50FB4E2A6945DF1186B7B1E9349DF702, xmp.did:64770380A701DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:68770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:4FFB4E2A6945DF1186B7B1E9349DF702, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:66770380A701DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:64770380A701DF11929EADD0693DAE72, uuid:6BEB8B77C5B3DE11BFA9F52E6A90A153, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:68770380A701DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:68770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:4EFB4E2A6945DF1186B7B1E9349DF702, xmp.did:81E89993A801DF11929EADD0693DAE72, xmp.did:4DFB4E2A6945DF1186B7B1E9349DF702, xmp.did:4CFB4E2A6945DF1186B7B1E9349DF702, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:64770380A701DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:68770380A701DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:F7BB2205DB43DF119072897C9DE0DEFE, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:F8BB2205DB43DF119072897C9DE0DEFE, xmp.did:F9BB2205DB43DF119072897C9DE0DEFE, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:FABB2205DB43DF119072897C9DE0DEFE, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:64770380A701DF11929EADD0693DAE72, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:734B1E099B59DF11ABEDECE9E8BFAF83, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:FBBB2205DB43DF119072897C9DE0DEFE, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:759C21BA836DDF11BA21EF387E3A897F, xmp.did:CEB385AC02BFDF11A93ADCD1D2ADB97B, xmp.did:CFB385AC02BFDF11A93ADCD1D2ADB97B, xmp.did:D0B385AC02BFDF11A93ADCD1D2ADB97B, xmp.did:CDB385AC02BFDF11A93ADCD1D2ADB97B, xmp.did:78F8067B7685DF11ADD0F4515757C315, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:68770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B4E46123D467DF11B3C6C278CE996141, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D2B235BD6844DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:68770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:B4E46123D467DF11B3C6C278CE996141, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D2B235BD6844DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D3B235BD6844DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D4B235BD6844DF11AC92DFD421552117, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D5B235BD6844DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D6B235BD6844DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:EA1414D16B44DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:E71414D16B44DF11AC92DFD421552117, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, uuid:62781462-359d-4d29-905c-63dbae03de94, xmp.did:51FB4E2A6945DF1186B7B1E9349DF702, xmp.did:949F8EF8929BDF11B5AFA8DA859ACE3D, xmp.did:64770380A701DF11929EADD0693DAE72, xmp.did:66770380A701DF11929EADD0693DAE72, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:D5B235BD6844DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:E81414D16B44DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:E91414D16B44DF11AC92DFD421552117, xmp.did:EB1414D16B44DF11AC92DFD421552117, xmp.did:DBE692F281FEDE11B2FAEB3BB64023F6, xmp.did:FBE3116A81FEDE11B2FAEB3BB64023F6, xmp.did:EC1414D16B44DF11AC92DFD421552117, xmp.did:F65EA85F81FEDE11B2FAEB3BB64023F6, xmp.did:ED1414D16B44DF11AC92DFD421552117, xmp.did:66770380A701DF11929EADD0693DAE72, uuid:67EB8B77C5B3DE11BFA9F52E6A90A153
Warning                         : [Minor] Extracted only 1000 xmpMM:Manifest items. Ignore minor errors to extract all
Doc Change Count                : 1
Format                          : application/pdf
Title                           : Basic Operation Guide
Description                     : MF4500 Series/MF4400 Series
Creator                         : CANON INC.
Subject                         : English
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 164

EXIF Metadata provided by EXIF.tools

Canon Imageclass Mf4450 Laser Multifunction Printer 4509B021Aa Users Manual Basic Operation Guide

4509B021AA to the manual ec511a2b-1b19-4376-a6e9-ebc7e69e082f

Navigation menu

Versions of this User Manual:

Views

Navigation