Canon Imageclass Mf8050Cn Multifunction Printer 3556B001Aa Users Manual Basic Operation Guide
Canon-Color-Imageclass-Mf8050Cn-Operation-Guide-588350 canon-color-imageclass-mf8050cn-operation-guide-588350
3555B001AA to the manual 12727e10-ff99-4d81-8edd-de767b94789b
2015-01-23
: Canon Canon-Imageclass-Mf8050Cn-Multifunction-Printer-3556B001Aa-Users-Manual-239930 canon-imageclass-mf8050cn-multifunction-printer-3556b001aa-users-manual-239930 canon pdf
Open the PDF directly: View PDF 
.
Page Count: 159
Basic Operation Guide
Network Setting Procedure
Security Functions
Searching in Detail
See the e-Manual.
User Software CD-ROM
Searching the Installation and
Connection Procedure
See the Starter Guide.
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe
place for future reference.
1
2
3
4
5
6
7
8
9
10
11
Quick View- Perform Useful Tasks
Next
Page
Before Using the Machine
P.1-1
Document and Paper Handling
P.2-1
Copying
P.3-1
Printing from a Computer
P.4-1
Registering Destinations
in the Address Book
P.5-1
Using the Fax Functions
P.6-1
Using the Scan Functions
P.7-1
Maintenance
P.8-1
Troubleshooting
P.9-1
Registering/
Setting the Various Functions
P.10-1
Appendix
P.11-1
Quick View- Perform Useful Tasks
Copy
Print
Fax
Scan
Network Settings & Remote UI
There are a variety of copy functions that are explained in later pages of this manual as well as in the e-Manual. You
can enlarge or reduce copies as well as copy multiple documents onto one sheet. Additionally, you can erase the
background of documents or adjust the density and image quality before copying.
Below is a quick overview of highlighted copy features that you can utilize in your everyday use.
Adjusting the Image Quality According to the Document
For details, see "Copying" from p. 3-1.
Image Quality Adjustment
Background Adjustment
You can adjust the image quality according to the types of
documents.
A correct selection is necessary for the optimal reproduction
of the document.
You can copy with the background color of the document
erased.
You can also adjust the background for each color.
Color Adjustment
You can adjust the density for each color.
Density Adjustment
You can adjust the density of copies according to the
document.
Various Copy Functions
For details, see "Copying" from p. 3-1.
Enlarged/Reduced Copies
Reduced Layout
You can enlarge or reduce standard size documents to copy
on standard size paper or specify the copy ratio in
percentage.
You can reduce multiple documents to copy them onto one
sheet.
2 on 1
2-Sided Copying (MF8350Cdn Only)
You can copy 1-sided documents on both sides of paper.
4 on 1
Collating
You can sort copies into sets arranged in page order.
Copying ID Card
1
2
1
3
2
1
1
3
2
3
2
3
1
1
2
1
2
3
2
3
3
You can make a copy of a 2-sided card onto one side of
paper.
Quick View- Perform Useful Tasks
Copy
Print
Fax
Scan
Network Settings & Remote UI
There are a variety of print functions that are explained in later pages of this manual as well as in the e-Manual.
Enlarge or reduce documents and print multiple-page data onto one sheet. If you are using the MF8350Cdn, you can
also perform 2-sided printing.
Below is a quick overview of highlighted print features that you can utilize in your everyday use.
Various Printing Functions
For details, see "Printing from a Computer" from p. 4-1.
Enlarged/Reduced Printing
Reduced Layout
You can enlarge or reduce standard size documents to copy
on standard size paper or specify the copy ratio in
percentage.
You can reduce multiple documents to print them onto one
sheet.
2-Sided Printing (MF8350Cdn Only)
You can print on both sides of paper.
Miscellaneous Printing Functions
For details, see "Print" in the
e-Manual.
Booklet Printing (MF8350Cdn Only)
Watermark Printing
Booklet printing allows you to make a booklet by folding
printouts in half.
You can superimpose watermarks (such as [COPY] and
[DRAFT]) over the documents created by an application.
Switching between Color and B&W Printing
You can print color documents in black and white.
Poster Printing
You can magnify and divide a single page image to print it out
on multiple sheets of paper. You can make one large poster
by joining these printouts together.
Displaying a Preview before Printing
You can check the printout result on a computer display.
Selecting a "Profile"
Some printer driver settings are provided as "Profiles"
beforehand.
You can perform printing which suits your needs only by
selecting a "Profile."
Quick View- Perform Useful Tasks
Copy
Print
Fax
Scan
Network Settings & Remote UI
There are a variety of fax functions that are explained in later pages of this manual as well as in the e-Manual. The
machine is equipped with a Super G3 fax, with high transmission speeds as well as the PC function which can send
a document from a computer directly, which reduces paper costs.
Below is a quick overview of highlighted fax features that you can utilize in your everyday use.
Sending a Document Directly from a Computer (PC Fax)
You can send a document or image created in an application
as a fax directly using the fax driver from a computer on a
network. Because you do not need to print the document, you
can reduce the paper cost as well as send a clear document
which has little dirt or blur.
For details, see "Fax" in the
e-Manual.
You can import the address book using the fax driver,
enabling you to send a fax to a destination easily without
mistakes.
You can also create a cover sheet for when sending a fax.
* You need to install the fax driver in a computer.
* If you are a Macintosh user, see the Fax Driver Guide.
Data is created
in a computer.
Send
Fax driver screen
Forwarding the Received Fax
You can forward received faxes automatically to a destination
specified beforehand.
By specifying the forwarding settings, you can forward all of
the received documents.
Registering Destinations in the Address Book
By registering destinations for sending faxes beforehand, you
can save many steps to enter the destinations when sending
the documents.
For details, see "Using the Fax Functions" from p. 6-1.
Received fax
Forward
For details, see "Registering Destinations in the Address Book" from p. 5-1.
One-touch keys
Coded dialing
Group dialing
Quick View- Perform Useful Tasks
Copy
Print
Fax
Various Sending/Receiving Functions
Scan
Network Settings & Remote UI
For details, see "Using the Fax Functions" from p. 6-1.
Various Sending Functions
Various Methods for Specifying a Destination
You can register fax destinations in the address book. You can
specify the destinations using various methods, enabling you to
send documents quickly and easily.
Destination search
Destination Group
You can combine multiple destinations and register them as a
group.
Up to 199 destinations can be combined.
AAAA
BBBB
CCCC
Specifying from the sending history
One-touch keys
By registering destinations in one-touch keys, you can specify
a destination in one step.
You can register up to 19 destinations in one-touch keys.
The previous setting
The second previous setting
The third previous setting
AAAA
Sequential broadcast
Coded dialing
Because you can register up to 181 destinations under coded
dial codes, you can register destinations which cannot be
registered under one-touch keys.
If you forget the coded dial codes, you can specify the
destination by searching it in the address book.
By scanning a document once, you can send the same
document to multiple destinations.
AAA
CCC
MMM
SSS
BBBB
###
Coded Dial
Number
Various Receiving Functions
Receiving in the Memory
Remote Receiving
Received documents are normally printed immediately.
However, you can store the documents temporarily in the
memory without printing.
You can print the stored documents at any time. If you do not
need them, you can delete them, saving paper to be used.
If an external telephone is connected, you can switch to the
fax receiving mode immediately by dialing the ID number for
fax receiving using the dial buttons of the telephone during a
phone call.
Quick View- Perform Useful Tasks
Copy
Print
Fax
Scan
Network Settings & Remote UI
There are a variety of scan functions that are explained in later pages of this manual as well as in the e-Manual. You
can easily send scanned documents to your computer as well as save scanned images or documents to a USB
memory directly from the machine.
Below is a quick overview of highlighted scan features that you can utilize in your everyday use.
Saving in a Computer
For details, see "Using the Scan Functions" from p. 7-1.
There are two methods for saving scanned documents in a computer.
Saving the Documents Using the Operation Panel of the Machine
You can easily save scanned documents
in a computer only by operating the
operation panel of the machine.
Various scanning settings have been
prepared for your purposes. Therefore,
you can create a "Searchable PDF" file,
which can be used for text retrieval or as
text data, without specifying special
settings.
1
Documents
2
3
Data
Saving the Documents Using Operations from a Computer
Documents
Scanning with the MF Toolbox
1
Scanning is performed by operating the
software supplied with the machine.
For details, see "Scan" in the
e-Manual.
Data
3
2
Scanning from an Application
Scanning with the WIA Driver (Windows XP/Vista/7 Only)
Scanning is performed using your application.
This allows you to open the scanned data as
is in your application.
Scanning is performed using the driver system supplied with
Windows operating systems.
There are various scanning methods.
࣭Scanning from the [Scanner and Camera Wizard] dialog box
࣭Scanning from the [Windows Fax and Scan] dialog box
࣭Scanning from Windows Photo Gallery
࣭Scanning from an Application
For details, see "Scan" in the
e-Manual.
For details, see "Scan" in the
Saving in a USB Memory
For details, see "Using the Scan Functions" from p. 7-1.
You can save scanned documents in a USB memory connected to the machine.
Documents
e-Manual.
Data
Quick View- Perform Useful Tasks
Copy
Print
Fax
Scan
Network Settings & Remote UI
There are a variety of network settings that are explained in the e-Manual. Since the machine has a built-in network
board, you can print, fax, and scan from a computer via a network. You can also perform efficient management by
configuring the machine using the Remote UI.
Below is a quick overview of highlighted network settings that you can utilize in your everyday use.
Various Network Settings
For details, see "Network Settings" in the
Configuration for communicating
with a computer
Basic Network Settings
Setting the IP address (IPv4)
Configuring the machine
- IP address
- Subnet mask
- Gateway address
- LPD, RAW, WSD
Miscellaneous Settings
Communication mode/
Communication speed
Waiting time for connection
As needed
DNS
Configuring a computer
As needed
WINS server
- Port settings
- Sharing settings for the printer
Setting the IP address (IPv6)
Security Settings
e-Manual.
For details, see "Security" in the
Administration Settings
Restricting Network Connection
e-Manual.
Restricting Destination Operations/
Sending Functions
System administrator settings
SNMP settings
Address book PIN
- Manager ID/PIN
Allowing the HTTP communication
Restricting new destinations
Device information
Setting a port number
Restricting the PC fax
- Device name/Installation site
Restricting sending from history
Dept. ID management
Fax number confirmation re-entry
- Department ID/PIN/
Function restriction
- Unknown ID job management
Restricting sequential broadcast
Restricting displaying the job history
Restricting memory media
Remote UI On/Off
Restricting USB connection
Configuring Using the Remote UI
Remote UI Functions
Checking the status and information
of the machine
For details, see "Setting and Managing from Computer" in the
How to start the Remote UI
1 Start the web browser.
Job Management
System settings
Forwarding settings
Department ID management
2 Enter "http:///" in the address field, and
then press the [ENTER] key on your
keyboard.
e-Manual.
e-Manual → Starting the Remote UI
3 Log on to the Remote UI.
(1) Select [System Manager Mode] or [End-User
Mode].
(2) For [System Manager Mode], enter [System
Manager ID] and [System Manager PIN].
For [End-User Mode], enter [User Name].
(3) Click [OK].
Address book management
Device settings
(1)
(1)
(2)
(3)
Contents
Paper Type
ii
Manuals for the Machine
v
Printable Range
2-8
Available Features
vi
Loading Paper
2-9
How to Use This Manual
vi
Important Safety Instructions
vii
In the Manual Feed Slot (for MF8050Cn)
2-12
xi
Precautions when Loading Paper
2-13
Paper Loading Capacity
2-13
Paper Loading Orientation
2-14
Installation Requirements and Handling
Legal Notices
xiii
Laser Safety
xvii
1. Before Using the Machine
1-1
In the Paper Cassette
In the Multi-Purpose Tray (for MF8350Cdn)
2-9
2-11
When printing paper with a letterhead or logo
(previously printed paper)
2-14
Printing on Envelopes
2-15
Setting a Paper Size and Type
For the Paper Cassette
Names and Functions on Each Part of the Machine
2-16
2-16
1-2
Registering the Default Paper Settings for the Multi-purpose Tray
Front Side
1-2
(Manual Feed Slot)
2-16
Back Side
1-3
Registering a Custom Paper Size
2-17
Interior
1-4
Multi-purpose Tray (Manual Feed Slot)
1-5
Paper Cassette
1-6
Operation Panel
1-7
Main Operation Panel
1-7
Fax Operation Panel
1-8
LCD (Standby Mode)
1-9
Copy Mode
1-9
Fax Mode
1-9
Scan Mode
1-9
Text Input Method
1-10
Changing Entry Mode
1-10
Entering Letters and Symbols
1-10
Moving the Cursor (Entering a Space)
1-10
Deleting Characters
1-10
Setting the Sleep Timer
1-11
Setting the Current Date and Time
1-12
Selecting Print Side (MF8350Cdn Only)
2-19
When setting this item to
(the default setting)
2-19
When setting this item to
2-19
3. Copying
3-1
Basic Copying Method
3-2
Canceling Copy Jobs
3-2
Copy Settings
Selecting Copy Papers
3-3
3-3
Adjusting the Density
3-3
Selecting Image Quality (Copy)
3-4
2-Sided Copying (MF8350Cdn Only)
3-4
Enlarging/Reducing Copies
3-5
Multiple Documents onto One Sheet (N on 1)
3-5
2. Document and Paper Handling 2-1
Collating Copies
3-6
Erase Dark Borders and Frame Lines (Frame Erase)
3-6
Documents Requirements
2-2
Emphasize the Outline of an Image (Sharpness)
3-6
Scanning Range
2-2
Copy
2-2
FAX
2-3
Scan (Saving in a Computer)
2-3
Scan (Saving in a USB Memory)
2-3
Placing Documents
Copying the ID Card
3-7
Changing the Default Values
3-8
4. Printing from a Computer
4-1
2-4
Installing the Printer Driver
4-2
Placing Documents on the Platen Glass
2-4
Printing from a Computer
4-3
Loading Document in the Feeder
2-4
Paper Requirements
Paper Size
ii
2-7
Contents
Scaling Print Output
4-3
2-6
Printing Multiple Pages on One Sheet
4-3
2-6
2-sided Printing (MF8350Cdn Only)
4-4
Checking/Deleting Print Jobs
4-4
Re-forwarding/Printing/Deleting the Documents in which a
Checking Print Status in the Middle of Printing or Waiting
4-5
Forwarding Error Occurs
Deleting Print Job in the Middle of Printing or Waiting
4-5
5. Registering Destinations in the
Address Book
5-1
Address Book
5-2
Checking/Handling Fax Documents in Memory
6-17
Checking/Canceling Fax Transmission Documents
6-17
Printing Received Fax Documents
6-17
Checking/Deleting Received Fax Documents
6-18
Checking the History of Received/Sent Fax Documents
6-19
One-touch Keys
5-2
Changing the Default Values for Fax
Coded Dialing
5-2
Changing the Fax Settings
Group Dialing
5-2
(Items Specified Using the [Menu] Button)
Storing/Editing One-Touch Keys
6-15
6-20
6-21
5-3
Setting procedure for Sending
6-21
Storing/Editing from the Operation Panel
5-3
Setting Items for the Send Settings
6-21
Storing/Editing from the Remote UI
5-4
Storing/Editing Coded Dial Codes
Storing/Editing from the Operation Panel
Storing/Editing from the Remote UI
Storing/Editing Recipients for Group Dialing
Storing/Editing from the Operation Panel
Storing/Editing from the Remote UI
6. Using the Fax Functions
Basic Method for Sending Faxes
Canceling Sending of Fax Documents
Fax Settings
Register Username
6-22
Change Defaults
6-22
5-6
Sender ID
6-22
5-6
Fax No.
6-22
Select Line Type
6-22
5-8
5-9
5-9
5-12
6-1
Offhook Alarm
6-22
ECM Sending
6-22
Pause Time
6-23
Auto Redial
6-23
Check Dial Tone Before Sending
6-23
Setting Procedure for Receiving
6-23
Setting Items for the Receive Settings
6-24
2-Sided Printing (MF8350Cdn Only)
6-24
Receive Data Reduction
6-24
6-2
Received Page Footer
6-24
6-2
Continue Printing When Toner Is Low
6-24
ECM Receiving
6-24
6-3
Incoming Ring
6-25
Image Quality Settings
6-3
Remote Receiving
6-25
Density Settings
6-3
Sharpness Settings
6-3
Specifying Destinations
Specifying Destinations by Entering a Fax Number
Manual/Auto Switch
6-25
System settings procedure
6-25
Setting Items for the System Settings
6-26
6-4
Send Start Speed
6-4
Receive Start Speed
6-26
Select Country/Region
6-26
6-26
Specifying Destinations Using the One-Touch Keys
6-4
Memory Lock Settings
6-26
Specifying Destinations Using Coded Dial
6-4
Address Book PIN
6-27
Specifying Destinations Using Group Dialing
6-5
Restrict New Destinations
6-27
Specifying Destinations Using the Address Book
Redialing (Manual Redialing)
Useful Fax Sending Methods
6-5
6-6
Allow Driver Faxing
6-27
Restrict Sending from History
6-27
Fax No. Confirmation Re-Entry
6-27
Restrict Sequential Broadcast
6-27
6-7
Sending a Fax after Making a Phone Call (Manual Sending)
6-7
Push-button Telephone Service Using a Dial-line
6-7
Sending a Fax Abroad (Adding Pauses)
6-8
Sending to Multiple Destinations at a Time (Sequential Broadcast)
6-9
7. Using the Scan Functions
Basic Operation Methods for Scanning
7-1
7-2
Scanning Documents and Saving Them in a Computer
Receiving Faxes
6-10
(USB & Network Connection)
7-2
Receive Mode
6-10
Saving Scanned Documents in a USB Memory
7-3
Changing the Receive Mode
6-12
Detailed Settings for the Fax/Tel Mode
6-13
Forwarding Fax Documents
Registering Forwarding Destinations (Automatic Forwarding)
6-14
Forwarding Received Fax Documents in Memory to Other
Destinations (Manual Forwarding)
8. Maintenance
8-1
6-14
6-14
Cleaning the Machine
8-2
Cleaning the Exterior
8-2
Cleaning the Fixing Unit
8-2
Cleaning the ITB
8-3
iii
Cleaning the Platen Glass
8-3
Cleaning the Feeder Automatically
8-4
Replacing Toner Cartridges
10. Registering/Setting the Various
Functions
10-1
8-5
Setting Menu List
8-5
About Replacement Toner Cartridges
8-5
Printing a User Data List
10-2
Handling Toner Cartridges
8-6
Contents of the Setting Menu
10-2
Checking the Toner Level
8-6
When a Message Appears
8-7
Replacing Toner Cartridges
8-7
Precautions when Replacing Toner Cartridges
Purchase Consumables
8-8
11. Appendix
Main Specifications
11-1
11-2
8-9
Machine Specifications
11-2
Recycling Used Cartridges
8-10
Copy Specifications
11-2
The Clean Earth Campaign
8-10
Printer Specification
11-2
U.S.A. PROGRAM
8-10
Scanner Specifications
11-3
Packaging
8-10
Fax Specifications
11-3
Shipping
8-11
Telephone Specifications
11-3
Cassette Feeding Unit-V1 (optional) (MF8350Cdn Only)
11-3
CANADA PROGRAM-CANADA PROGRAMME
Transporting the Machine
Precautions when Transporting the Machine
9. Troubleshooting
Clearing Jams
8-12
8-13
8-14
9-1
9-2
Document Jams in the Feeder
9-2
Paper Jams in the Paper Cassette (Cassette 1 or 2)
9-3
Paper Jams in the Multi-purpose Tray (MF8350Cdn Only)
9-4
Paper Jams in the Manual Feed Slot (MF8050Cn Only)
9-5
Paper Jams in the Rear Cover or Duplex Unit (MF8350Cdn Only) 9-6
Paper Jams in the Output Area (MF8350Cdn Only)
9-7
Paper Jams in the Output Area and Rear Cover (MF8050Cn Only) 9-8
Display Messages
9-9
Error Code
9-9
If Appears
9-11
Troubleshooting
9-12
Check the Following First
Is the power switch turned ON?
9-12
9-12
Has the power switch been just turned ON?
9-12
Is the machine in Sleep mode?
9-12
Is the Error indicator on or blinking?
9-12
Is a message displayed on the display?
9-13
Is the telephone line connected or configured properly?
If You Cannot Solve a Problem
iv
10-2
About the Supplied Toner Cartridge
9-13
9-13
If a Power Failure Occurs
9-14
If You Cannot Solve a Problem
9-15
Customer Support (U.S.A.)
9-15
Customer Support (Canada)
9-16
Index
11-4
Manuals for the Machine
Read this manual first.
Starter Guide
•
•
•
•
•
This manual describes the settings for
the machine and software installation.
Be sure to read this manual before using
the machine.
Preface
Installing the Machine
Configuring and Connecting the Fax
Connecting to a Computer and Installing the Drivers
Appendix
Basic Operation Guide
Read this manual next.
•
•
•
•
•
Before Using the Machine
Document and Paper Handling
Copying
Printing from a Computer
Registering Destinations
in the Address Book
• Using the Fax Functions
This manual describes the basic
machine operations.
e-Manual
Read the desired chapter
to suit your needs.
The e-Manual is categorized by subject to
find desired information easily.
This manual
•
•
•
•
Using the Scan Functions
Maintenance
Troubleshooting
Registering/Setting the Various
Functions
• Appendix
* The e-Manual is included in the User Software CD-ROM.
•
•
•
•
•
•
•
Basic Operation
Copy
Fax
Print
Scan
Network Settings
Security
• Setting and Managing from
Computer
• Troubleshooting
• Maintenance
• Setting Menu List
• Specifications
v
Available Features
The available features are introduced for each model.
{: available
-: not available
Copy
Print
2-sided Printing
Fax (PC Fax)
USB Scan
Network Scan
Remote UI
ADF (1-sided)
MF8350Cdn
{
{
{
{
{
{
{
{
ADF (2-sided)
-
MF8050Cn
{
{
-
{
{
{
{
{
-
How to Use This Manual
Symbols Used in This Manual
WARNING
Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To
use the machine safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the
machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine
correctly, and avoid damage to the machine or property.
NOTE
Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is
highly recommended.
Keys and Buttons Used in This Manual
The following symbols and key names are a few examples of how keys to be pressed are expressed in this manual.
• Operation panel keys: [Key icon] + (Key name)
] (Stop)
Example: [
• Display:
• Buttons and items on the computer display: [Preferences]
Illustrations Used in This Manual
Illustrations used in this manual
Illustrations of the model MF8350Cdn are used in this manual. When there is any difference among the machines,
it is clearly indicated in the text, e.g., "For MF8050Cn."
For information on the standard features for each model, see the followings.
"Available Features" (→P.vi)
The display used in this manual
The display used in this manual is the factory preset display for the MF8350Cdn. Depending on the system configuration and product purchased,
the appearance of the display may differ.
vi
Important Safety Instructions
Please read these "Important Safety Instructions" thoroughly before operating the machine.
As these instructions are intended to prevent injury to the user and other persons or to prevent destruction of property, always pay
attention to these instructions and operational requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual.
Installation
- A location exposed to smoke and steam, such as near a
cookery or humidifier
- A location exposed to rain or snow
WARNING
• Do not install the machine in a location near alcohol, paint
thinner, or other flammable substances. If flammable substances come into contact with electrical parts inside the
machine, this may result in a fire or electrical shock.
• Do not place the following items on the machine.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with
water or liquids
If these items come into contact with a high-voltage area inside the machine, this may result in a fire or electrical shock.
If these items are dropped or spilled inside the machine,
immediately turn off the power switches of the machine and
computer (1) and disconnect the interface cable if it is connected (2). Then, unplug the power plug from the AC power
outlet (3) and contact your local authorized Canon dealer.
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
• When installing the machine, gently lower the machine to
the installation site so as not to catch your hands between
the machine and the floor or between the machine and
other equipment, as this may result in personal injury.
• When connecting the interface cable, connect it properly by
following the instructions in this manual. If not connected
properly, this may result in malfunction or electrical shock.
• When moving the machine, follow the instructions in this
manual to hold it correctly. Failure to do so may cause you to
drop the machine, resulting in personal injury.
“Transporting the Machine” (→P.8-13)
(2)
Power Supply
(2)
(1)
WARNING
(3)
(1)
• Keep the power cord away from all heat sources. Failure to
do so can cause the power cord insulation to melt, resulting
in a fire or electrical shock.
(2)
(2)
• The power cord should not be taut, as this may lead to a
loose connection and cause overheating, which could result
in a fire.
(1)
(3)
(1)
• When installing and removing the optional accessories, be
sure to turn the machine off, unplug the power plug, and
then disconnect all the interface cables and power cord from
the machine. Otherwise, the power cord or interface cables
may be damaged, resulting in a fire or electrical shock.
CAUTION
• Do not install the machine in unstable locations, such as on
unsteady platforms or inclined floors, or in locations subject
to excessive vibrations, as this may cause the machine to fall
or tip over, resulting in personal injury.
• The ventilation slots are provided for proper ventilation of
working parts inside the machine. Never place the machine
on a soft surface, such as a bed, sofa, or rug. Blocking the
slots can cause the machine to overheat, resulting in a fire.
• Do not install the machine in the following locations, as this
may result in a fire or electrical shock.
- A damp or dusty location
• Do not damage or modify the power cord. Also, do not place
heavy objects on the power cord or pull on or excessively
bend it. This can cause electrical damage, resulting in fire or
electrical shock.
• The power cord may become damaged if it is stepped
on, fixed with staples, or if heavy objects are placed on it.
Continued use of a damaged power cord can lead to an accident, such as a fire or electrical shock.
• Do not plug or unplug the power plug with wet hands, as
this can result in electrical shock.
• Do not plug the power cord into a multiplug power strip, as
this can result in a fire or electrical shock.
• Do not bundle up or tie up the power cord in a knot, as this
can result in a fire or electrical shock.
• Insert the power plug completely into the AC power outlet.
Failure to do so can result in a fire or electrical shock.
• If excessive stress is applied to the connection part of the
power cord, it may damage the power cord or the wires inside the machine may disconnect. This could result in a fire.
Avoid the following situations:
- Connecting and disconnecting the power cord frequently.
- Tripping over the power cord.
- The power cord is bent near the connection part, and
continuous stress is being applied to the power outlet or
the connection part.
- Applying a shock to the power connector.
vii
• Do not use power cords other than the one provided, as this
can result in a fire or electrical shock.
• As a general rule, do not use extension cords. Using an extension cord may result in a fire or electrical shock.
• Remove the power plug from the AC power outlet and
refrain from using the machine while it thunders. Lightening
can result in a fire, electrical shock or malfunction.
CAUTION
• Do not use a power supply voltage other than that listed
herein, as this may result in a fire or electrical shock.
• Always grasp the power plug when unplugging the power
plug. Do not pull on the power cord, as this may expose the
core wire of the power cord or damage the cord insulation,
causing electricity to leak, resulting in a fire or electrical
shock.
• Leave sufficient space around the power plug so that it can
be unplugged easily. If objects are placed around the power
plug, you may be unable to unplug it in an emergency.
Handling
WARNING
CAUTION
• Do not place heavy objects on the machine. The object or
the machine may fall, resulting in personal injury.
• Turn off the power switch when the machine will not be
used for a long period of time, such as overnight. Turn off
the machine and unplug the power plug if the machine
will not be used for an extended period of time, such as for
several days.
• Open or close covers and install or remove cassettes gently
and carefully. Be careful not to hurt your fingers.
• Keep your hands and clothing away from the roller in the
output area. Even if the machine is not printing, the roller
may suddenly rotate and catch your hands or clothing,
resulting in personal injury.
• The output slot is hot during and immediately after printing.
Do not touch the area surrounding the output slot, as this
may result in burns.
• Printed paper may be hot immediately after being output.
Be careful when removing the paper and aligning the removed paper, especially after continuous printing. Failure to
do so may result in burns.
• When performing copy with a thick book placed on the
platen glass, do not press the feeder forcefully. This may
damage the platen glass and cause personal injury.
• Do not disassemble or modify the machine. There are
high-temperature and high-voltage components inside the
machine which may result in a fire or electrical shock.
• Be careful not to drop a heavy object, such as a dictionary,
on the platen glass. This may damage the platen glass and
cause personal injury.
• Electrical equipment can be hazardous if not used properly.
Do not allow children to touch the power cord, cables, internal gears, or electrical parts.
• Close the feeder gently so as not to catch your hand. This
may result in personal injury.
• If the machine makes an unusual noise or emits smoke,
heat, or an unusual smell, immediately turn off the power
switches of the machine and computer and disconnect the
interface cable if it is connected. Then, unplug the power
plug from the AC power outlet and contact your local authorized Canon dealer. Continued use can result in a fire or
electrical shock.
• Do not use flammable sprays near the machine. If flammable
substances come into contact with electrical parts inside the
machine, this may result in a fire or electrical shock.
• The laser beam can be harmful to human bodies. The laser
beam is confined in the laser scanner unit by a cover, so
there is no danger of the laser beam escaping during normal
machine operation. Read the following remarks and instructions for safety.
- Never open covers other than those indicated in this
manual.
- Do not remove the caution label attached to the cover of
the laser scanner unit.
• Always turn off the power switches of the machine and computer, and then unplug the power plug and interface cables
before moving the machine. Failure to do so can damage
the cables or cords, resulting in a fire or electrical shock.
• Confirm that the power plug or power connecter is inserted
completely after moving the machine. Failure to do so can
result in an overheating and fire.
• Do not drop paper clips, staples, or other metal objects
inside the machine. Also, do not spill water, liquids, or other
flammable substances (alcohol, benzene, paint thinner, etc.)
inside the machine. If these items come into contact with
a high-voltage area inside the machine, this may result in a
fire or electrical shock. If these items are dropped or spilled
inside the machine, immediately turn off the power switches
of the machine and computer and disconnect the interface
cable if it is connected. Then, unplug the power plug from
the AC power outlet and contact your local authorized
Canon dealer.
• When plugging or unplugging a USB cable when the power
plug is plugged into an AC power outlet, do not touch the
metal part of the connector, as this can result in electrical
shock.
- If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes.
• If you operate this machine in manners other than the
control, adjustment, and operating procedures prescribed in
this manual, this may result in hazardous radiation exposure.
• This machine is confirmed as the class 1 laser product in
IEC60825-1:2007.
Maintenance and Inspections
WARNING
• When cleaning the machine, turn off the machine and
computer, and unplug the interface cables and power plug.
Failure to do so can result in a fire or electrical shock.
viii
• Unplug the power plug from the AC power outlet periodically and clean the area around the base of the power plug's
metal pins and the AC power outlet with a dry cloth to
remove all dust and grime. In damp, dusty, or smoky locations, dust can build up around the power plug and become
damp, which can cause a short circuit, resulting in a fire.
• Clean the machine with a well wrung out cloth dampened
with water or mild detergent diluted with water. Do not
use alcohol, benzene, paint thinner, or other flammable
substances. If flammable substances come into contact with
electrical parts inside the machine, this may result in a fire or
electrical shock.
• Some areas inside the machine are subject to high voltage.
When removing jammed paper or when inspecting inside
of the machine, be careful not to allow necklaces, bracelets,
or other metal objects to touch the inside of the machine, as
this can result in burns or electrical shock.
• Do not dispose of used toner cartridges in open flames.
This may cause the toner remaining inside the cartridges to
ignite, resulting in burns or fire.
• Confirm that the power plug or power connecter is inserted
completely after cleaning the machine. Failure to do so can
result in an overheating and fire.
• Check the power cord and plug regularly. The following
conditions may result in fire, so please contact your local
authorized Canon dealer or the Canon help line.
- There are burn marks on the power plug.
- The blade on the power plug is deformed or broken.
- The power is turned OFF or ON when bending the power
cord.
- The coating of the power cord is damaged, cracked, or
dented.
- A part of the power cord becomes hot.
• Check regularly that the power cord and plug are not handled in the following manner. Failure to do so can result in a
fire or electrical shock.
- The power connector is loosened.
- Stress is being applied to the power cord by a heavy object or by fixing it with staples.
- The power plug is loosened.
- The power cord is tied in a bundle.
- A part of the power cord is put in an aisle.
- The power cord is put in front of the heating appliance.
CAUTION
• The fixing unit and its surroundings inside the machine
become hot during use. When removing jammed paper or
when inspecting the inside of the machine, do not touch the
fixing unit and its surroundings, as this may result in burns.
• When removing jammed paper or when inspecting the
inside of the machine, do not expose yourself to the heat
emitted from the fixing unit and its surroundings for a prolonged period of time. Doing so may result in low temperature burns, even though you did not touch the fixing unit
and its surroundings directly, as this may result in burns.
• If paper is jammed, remove the jammed paper so that any
pieces of paper do not remain inside the machine according to the displayed message. Also, do not put your hand
in an area other than indicated areas, as this may result in
personal injuries or burns.
• When removing jammed paper or replacing a toner
cartridge, be careful not to get any toner on your hands or
clothing, as this will dirty your hands or clothing. If toner
gets on your hands or clothing, wash them immediately
with cold water. Washing with warm water sets the toner,
making it impossible to remove the toner stains.
• When removing jammed paper, be careful not to allow the
toner on the paper to scatter. The toner may get into your
eyes or mouth. If toner gets into your eyes or mouth, wash
them immediately with cold water and consult a physician.
• When loading paper or removing jammed documents or
paper, be careful not to cut your hands with the edges of the
paper.
• When removing a toner cartridge, remove the toner cartridge carefully so as to prevent the toner from scattering
and getting into your eyes or mouth. If toner gets into your
eyes or mouth, wash them immediately with cold water and
consult a physician.
• Do not attempt to disassemble the toner cartridge. The
toner may scatter and get into your eyes or mouth. If toner
gets into your eyes or mouth, wash them immediately with
cold water and consult a physician.
• If toner leaks from the toner cartridge, be careful not to
inhale the toner or allow it to come into direct contact with
your skin. If the toner comes into contact with your skin,
wash with soap. If the skin becomes irritated or you inhale
the toner, consult a physician immediately.
Consumables
WARNING
• Do not dispose of used toner cartridges in open flames. This
may cause the toner to ignite, resulting in burns or fire.
• Do not store toner cartridges or paper in a location exposed
to open flames. This may cause the toner or paper to ignite,
resulting in burns or fire.
• When disposing of a toner cartridge, place the toner
cartridge into a bag to prevent the toner from scattering,
and then dispose of the toner cartridge according to local
regulations.
ix
CAUTION
• Keep the toner cartridges and other consumables out of
the reach of small children. If the toner or other parts are
ingested, consult a physician immediately.
• Do not attempt to disassemble the toner cartridge. The
toner may scatter and get into your eyes or mouth. If toner
gets into your eyes or mouth, wash them immediately with
cold water and consult a physician.
• If toner leaks from the toner cartridge, be careful not to
inhale the toner or allow it to come into direct contact with
your skin. If the toner comes into contact with your skin,
wash with soap. If the skin becomes irritated or you inhale
the toner, consult a physician immediately.
• Do not pull out the sealing tape forcefully or stop at midpoint, as this may cause toner to spill out. If toner gets into
your eyes or mouth, wash them immediately with cold water
and consult a physician.
Others
WARNING
• If you are using a cardiac pacemaker
This machine generates a low level magnetic field. If you
use a cardiac pacemaker and feel abnormalities, please
move away from this machine and consult your physician
immediately.
Telephone Equipment
When using telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
1. Do not use this machine near water (i.e., near a bathtub,
kitchen sink, or laundry tub), or in a wet basement or near a
swimming pool.
2. Avoid using the telephone during an electrical storm, as
there may be a remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity
of the leak.
x
Installation Requirements and Handling
In order to use this machine in a safe and trouble-free manner, install the machine in a place that fulfills the following conditions.
Also, read the remarks carefully.
Temperature and Humidity Conditions
• Temperature range: 50 to 86°F (10 to 30°C)
• Humidity range: 20 to 80 % RH (no condensation)
IMPORTANT
Protecting the machine from condensation
• To prevent condensation from forming inside the machine
in the following cases, let the machine adjust to the ambient
temperature and humidity for at least two hours before use.
- When the room where the machine is installed is heated
rapidly
- When the machine is moved from a cool or dry location to
a hot or humid location
• If water droplets (condensation) form inside the machine,
this can result in paper jams or poor print quality.
When using an ultrasonic humidifier
When you are using an ultrasonic humidifier, it is therefore
recommended that you use purified water or other water that
is free of impurities.
If you use tap water or well water, impurities in the water will
be dispersed through the air. This can be trapped inside the
machine, causing degradation in print quality.
Installation Requirements
• A location with sufficient space
• A location with good ventilation
• A location with a flat, even surface
• A location able to fully support the weight of the machine
IMPORTANT
Do not install the machine in the following locations, as
this may result in damage to the machine.
• A location subject to dramatic changes in temperature or
humidity
• A location subject to condensation
• A poorly ventilated location
(If you use the machine for a long time or to perform a large
amount of printing in a poorly ventilated room, the ozone
or other odors generated by the machine may create an
uncomfortable working environment. In addition, chemical
particles are dispersed during printing; therefore, it is important to provide adequate ventilation.)
• A location near equipment that generates magnetic or electromagnetic waves
• A laboratory or location where chemical reactions occur
• A location exposed to salt air, corrosive gases, or toxic gases
Installation Space
Precautions when connecting the power cord
Required installation space
• Do not connect this machine to an uninterruptible power
source.
MF8350Cdn
in. (mm)
52 1/4 (1327)
Paper
cassette
Feeder cover
4
(100)
4
(100)
4
(100)
- Copy machine
- Air conditioner
Feeder
33 1/2 (851)
• Do not plug the power plug into the auxiliary outlet on a
computer.
Do not use the same AC power outlet for both the machine
and any of the following equipment.
Front View
4
(100)
• Use an AC power outlet exclusively for the machine. Do not
use the other sockets of the AC power outlet.
37 1/2 (951)
IMPORTANT
4
(100)
120 to 127 V 60 Hz
• A location, such as on a carpet or mat, that may warp from
the weight of the machine or where the machine is liable to
sink
26 3/4 (679)
Power Supply Requirements
Rear cover
- Shredder
in. (mm)
48 3/8 (1229)
Paper
cassette
4
(100)
Feeder cover
4
(100)
- MF8350Cdn: 1,200 W or less
4
(100)
• The maximum power consumption of the machine is as
follows.
Feeder
31 1/2 (801)
Miscellaneous precautions
Front View
4
(100)
• When unplugging the power cord, keep interval of 5 seconds or more before plugging it again.
MF8050Cn
26 1/2 (674)
- Equipment that generates electrical noise
4
(100)
- Equipment that consumes a large amount of electricity
Rear cover
- MF8050Cn: 900 W or less
• Electrical noise or a dramatic drop in mains voltage may
cause the machine or computer to operate incorrectly or
lose data.
xi
Maintenance and Inspections
IMPORTANT
• Follow the instructions in the caution label attached to this
machine.
• Avoid shaking or applying a shock to this machine.
• To prevent the paper jam, do not turn the power ON/OFF,
open/close the operation panel or rear cover, and load/unload paper in the middle of printing operation.
• Be sure to remove the toner cartridge from the machine
when transporting the machine.
• To avoid exposing the toner cartridge to light, place it in the
protective bag included with this machine or wrap it in a
thick cloth.
• Clean this machine regularly. If this machine becomes dusty,
it may operate improperly.
• Use a modular cable of 3 m or shorter in length.
• Depending on your locale or your telephone connection,
you may be unable to perform data communication. In this
case, contact your local authorized Canon dealer or the
Canon help line.
• The repairing parts and toner cartridges for the machine will
be available for at least seven (7) years after production of
this machine model has been discontinued.
Customer Support
Customer Support (U.S.A.)
Your machine is designed with the latest technology to provide trouble-free operation. If you encounter a problem with
the machine's operation, try to solve it by using the information in Chapter 9. If you cannot solve the problem or if you
think your machine needs servicing, contact Canon Customer
Care Center at 1-800-OK-CANON between the hours of 8:00
A.M. to 8:00 P.M. EST Monday through Friday. On-line support
for 24 hours is also available at the website.
http://www.canontechsupport.com/
Customer Support (Canada)
Canon Canada Inc., offers a full range of customer technical
support options*:
• For step-by-step troubleshooting, e-mail technical support,
the latest driver or document downloads, and answers to
frequently asked questions, visit http://www.canon.ca/
• Free live technical support 9 A.M. to 8 P.M. EST Monday
through Friday (excluding holidays) for products still under
warranty 1-800-OK-CANON
• For the location of the authorized service facility nearest
you, visit http://www.canon.ca/ or 1-800-OK-CANON
• If the problem cannot be corrected by using one of the
above technical support options, repair options are available
at the time of your call to the live technical support number
above or via the website at http://www.canon.ca/
* Support program specifics are subject to change without
notice.
xii
Legal Notices
International ENERGY STAR Program
As an ENERGY STAR® Partner, Canon U.S.A., Inc.
has determined that this product meets the
ENERGY STAR Program for energy efficiency.
The International ENERGY STAR Office Equipment Program is an international program that
promotes energy saving through the use of
computers and other office equipment.
The program backs the development and
dissemination of products with functions that
effectively reduce energy consumption. It is an
open system in which business proprietors can
participate voluntarily.
The targeted products are office equipment,
such as computers, displays, printers, facsimiles, and copiers. The standards and logos are
uniform among participating nations.
IPv6 Ready Logo
The machine uses the operating system which
obtained IPv6 Ready Logo Phase-1 defined by
IPv6 Forum.
(2) Rights holders of the SOFTWARE retain in all respects the
title, ownership and intellectual property rights in and to
the SOFTWARE. Except as expressly provided herein, no
license or right, expressed or implied, is hereby conveyed or
granted by rights holders of the SOFTWARE to you for any
intellectual property of rights holders of the SOFTWARE.
(3) You may use the SOFTWARE solely for use with the Canon
product you purchased (the “PRODUCT”).
(4) You may not assign, sublicense, market, distribute, or transfer the SOFTWARE to any third party without prior written
consent of rights holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may transfer the
SOFTWARE only when (a) you assign all of your rights to the
PRODUCT and all rights and obligations under the conditions to transferee and (b) such transferee agrees to be
bound by all these conditions.
(6) You may not decompile, reverse engineer, disassemble or
otherwise reduce the code of the SOFTWARE to human
readable form.
(7) You may not modify, adapt, translate, rent, lease or loan the
SOFTWARE or create derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make separate copies of
the SOFTWARE from the PRODUCT.
(9) The human-readable portion (the source code) of the SOFTWARE is not licensed to you.
Trademarks
Canon, the Canon logo, and Color imageCLASS are registered
trademarks of Canon Inc. in the United States and may also be
trademarks or registered trademarks in other countries.
Microsoft, Windows and Windows Vista are either trademarks
or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
All other product and brand names are registered trademarks,
trademarks or service marks of their respective owners.
Copyright
© 2010 by Canon Inc. All rights reserved.
No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any
language or computer language in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise, without the prior written permission of Canon Inc.
Third Party Software
A. This product includes third-party software modules. Use and
distribution of this software modules (the “SOFTWARE”) are
subject to conditions (1) through (9) below.
(1) You agree that you will comply with any applicable export
control laws, restrictions or regulations of the countries
involved in the event that this product including the SOFTWARE is shipped, transferred or exported into any country.
B. Notwithstanding A above, in case the other conditions
accompany third-party software modules , these software
modules are subject to the other conditions.
The Software Subjected to the Other Conditions
Please refer to eManual on a CD-ROM bundled with this product, for more detail and corresponding license conditions.
Disclaimers
The information in this document is subject to change without
notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT
AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION,
THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR
NON-INFRINGEMENT. CANON INC. SHALL NOT BE LIABLE FOR
ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE
USE OF THIS MATERIAL.
For CA, USA only
Included battery contains Perchlorate Material - special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for
details.
xiii
Legal Limitations on the Usage of Your Product and the Use of Images
Using your product to scan, print or otherwise reproduce
certain documents, and the use of such images as scanned,
printed or otherwise reproduced by your product, may be prohibited by law and may result in criminal and/or civil liability.
A non-exhaustive list of these documents is set forth below.
This list is intended to be a guide only. If you are uncertain
about the legality of using your product to scan, print or otherwise reproduce any particular document, and/or of the use
of the images scanned, printed or otherwise reproduced, you
should consult in advance with your legal advisor for guidance.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Paper Money
Money Orders
Certificates of Deposit
Postage Stamps (canceled or uncanceled)
Identifying Badges or Insignias
Selective Service or Draft Papers
Checks or Drafts Issued by Governmental Agencies
Motor Vehicle Licenses and Certificates of Title
Travelers Checks
Food Stamps
Passports
Immigration Papers
Internal Revenue Stamps (canceled or uncanceled)
Bonds or Other Certificates of Indebtedness
Stock Certificates
Copyrighted Works/Works of Art without Permission of
Copyright Owner
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. 1-800-OK-CANON
Users in the U.S.A.
Pre-Installation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine.
See Chapter 11, “Appendix,” for specific dimensions and
weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be
used.
2. Order an RJ11-C telephone wall jack (USOC), which
should be installed by the telephone company. If the
RJ11-C wall jack is not present, telephone/facsimile operation is not possible.
3. Order a normal business line from your telephone
company’s business representative. The line should be
a regular voice grade line or an equivalent one. Use one
line per unit.
DDD (Direct Distance Dial) line
-orIDDD (International Direct Distance Dial) line if you communicate overseas
FCC (Federal Communications Commission)
Color imageCLASS MF8350Cdn: F157902
Color imageCLASS MF8050Cn: F157802
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Use of shielded cable is required to comply with class B limits
in Subpart B of Part 15 of the FCC Rules. Do not make any
changes or modifications to the equipment unless otherwise
specified in this manual. If you make such changes or modifications, you could be required to stop operation of the equipment.
xiv
NOTE
Canon recommends an individual line following industry
standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse dial)
telephones. A dedicated extension off a PBX (Private Branch
eXchange) unit without “Call Waiting” can be used with your
facsimile unit. Key telephone systems are not recommended
because they send nonstandard signals to individual telephones for ringing and special codes, which may cause a
facsimile error.
C. Power Requirements
The machine should be connected to a standard 120 volt
AC, three-wire grounded outlet only.
Do not connect this machine to an outlet or power line
shared with other appliances that cause "electrical noise.”
Air conditioners, electric typewriters, copiers, and machines
of this sort generate electrical noise that often interferes
with communications equipment and the sending and
receiving of documents.
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and
the requirements adopted by the ACTA. On the rear panel of
this equipment is a label that contains, among other information, a product identifier in the format of US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone
company.
The REN (Ringer Equivalence Number) is used to determine the
number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices
not ringing in response to an incoming call. In most, but not
all areas, the sum of the RENs should not exceed five (5.0). To
be certain of the number of devices that may be connected
to a line, as determined by the total RENs, contact the local
telephone company. The REN for this product is part of the
product identifier that has the format US: AAAEQ##TXXXX. The
digits represented by ## are the REN without a decimal point
(e.g., 10 is a REN of 1.0).
An FCC compliant telephone line cable and modular plug is
provided with this equipment. This equipment is designed to
be connected to the telephone network or premise wiring using a compatible modular jack that is Part 68 compliant.
This equipment may not be used on coin service provided by
the telephone company. Connection to party lines is subjected
to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected
by the procedures described in this guide or the e-Manual,
disconnect the equipment from the telephone line cable and
disconnect the power cord.
The telephone line cable should not be reconnected or the
main power switch turned ON until the problem is completely
resolved. Users should contact Canon Authorized Service
Facilities for servicing of equipment, Information regarding
Authorized Service Facility locations can be obtained by calling
Canon Customer Care Center (1-800-OK-CANON).
Users in Canada
Pre-Installation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine.
See Chapter 11, “Appendix,” for specific dimensions and
weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be
used.
2. Order a CA11A modular jack, which should be installed
by the telephone company. If the CA11A jack is not
present, installation cannot occur.
3. Order a normal business line from your telephone
company’s business representative. The line should be
a regular voice grade line or an equivalent one. Use one
line per unit.
DDD (Direct Distance Dial) line
-orIDDD (International Direct Distance Dial) line if you communicate overseas
NOTE
Rights of the Telephone Company
If this equipment (Color imageCLASS MF8350Cdn/MF8050Cn)
causes harm to the telephone network, the telephone
company may temporarily disconnect service. The telephone
company also retains the right to make changes in facilities
and services that may affect the operation of this equipment.
When such changes are necessary, the telephone company is
required to give adequate prior notice to the user.
However, if advance notice is not possible, the telephone
company will notify the customer as soon as possible. Also,
the customer will be advised of his/her right to file a complaint
with the FCC if he/she believes it is necessary.
WARNING
The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device, including FAX machines, to send any message unless
such message clearly contains in a margin at the top or bottom
of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the
business or other entity, or other individual sending the message and the telephone number of the sending machine or
such business, other entity, or individual.
(The telephone number provided may not be a 900 number or
any other number for which charges exceed local or long-distance transmission charges.)
NOTE
In order to program this information into your machine, you
should complete the procedure for registering your name,
unit’s telephone number, time, and date in the Starter Guide.
Canon recommends an individual line following industry
standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse dial)
telephones. A dedicated extension off a PBX (Private Branch
eXchange) unit without “Call Waiting” can be used with your
facsimile unit. Key telephone systems are not recommended
because they send nonstandard signals to individual telephones for ringing and special codes, which may cause a
facsimile error.
C. Power Requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex). It should be independent from
copiers, heaters, air conditioners, or any electric equipment
that is thermostatically controlled. The rated value is 115
volts and 15 amperes. The CA11A modular jack should be
relatively close to the power outlet to facilitate installation.
Notice
• This product meets the applicable Industry Canada technical
specifications.
• The Ringer Equivalence Number is an indication of the
maximum number of devices allowed to be connected to
a telephone interface. The termination of an interface may
consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices does
not exceed five.
• The REN of this product is 1.0.
• Before installing this equipment, users should ensure that
it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also
be installed using an acceptable method of connection. In
some cases, the company’s inside wiring associated with a
single line individual service may be extended by means of
a certified connector assembly (telephone extension cord).
The customer should be aware that compliance with the
above conditions may not prevent deterioration of service in
some situations.
• Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by
the supplier. Any repairs or alterations made by the user to
this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to
disconnect the equipment.
xv
• Users should ensure for their own protection that the electrical ground connections of the power utility, telephone
lines, and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly
important in rural areas.
CAUTION
Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
NOTE
This equipment complies with the Canadian ICES-003 Class B
limits.
Utilisation au Canada
Conditions à Remplir Préalablement à L’installation d’un
Télécopieur Canon
A. Emplacement
Prévoir une table, un meuble, ou un bureau suffisamment
solide et de taille appropriée (voir le chapitre 11, Annexe
(Appendix), pour les indications de poids et dimensions).
B. Installation téléphonique
1. Une seule ligne téléphonique (tonalités ou impulsions)
doit être utilisée.
2. Il faut commander un jack modulaire CA11A qui sera
installé par la compagnie téléphonique. Sans ce jack, la
mise en place serait impossible.
3. Si vous vous abonnez à une nouvelle ligne, demandez
une ligne d’affaires normale de qualité téléphonique
courante ou équivalente. Prenez un abonnement d’une
ligne par appareil.
Ligne automatique interurbaine
ou
Ligne automatique internationale (si vous communiquez
avec les pays étrangers)
NOTE
Canon vous conseille d’utiliser une ligne individuelle conforme
aux normes industrielles, à savoir:
ligne téléphonique 2,500 (pour appareil à clavier) ou 500
(pour appareil à cadran/impulsions). Il est également possible de raccorder ce télécopieur à un système téléphonique à
poussoirs car la plupart de ces systèmes émettent des signaux
d’appel non normalisés ou des codes spéciaux qui risquent de
perturber le fonctionnement du télécopieur.
C. Condition d’alimentation
Raccordez le télécopieur à une prise de courant plus terre à
trois branches, du type simple ou double, et qui ne sert pas
à alimenter un copieur, un appareil de chauffage, un climatiseur ou tout autre appareil électrique à thermostat.
L’alimentation doit être de 115 volts et 15 ampères. Pour
faciliter l’installation, le jack CA11A doit être assez proche
de la prise de courant.
xvi
Remarques
• Le présent matériel est conforme aux spécifications techniques applicables d’Industrie Canada.
• Avant d’installer cet appareil, l’utilisateur doit s’assurer qu’il
est permis de le connecter à l’équipement de la compagnie
de télécommunication locale et doit installer cet appareil
en utilisant une méthode de connexion autorisée. Il se
peut qu’il faille étendre la circuiterie intérieure de la ligne
individuelle d’abonné, qui a été installée par la compagnie,
au moyen d’un jeu de connecteurs homologués (rallonge
téléphonique).
• L’attention de l’utilisateur est attirée sur le fait que le respect
des conditions mentionnées ci-dessus ne constitue pas une
garantie contre les dégradations de qualité du service dans
certaines circonstances.
• L’indice d’équivalence de la sonnerie (IES) sert à indiquer
le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d’une
interface peut consister en une combinaison quelconque
de dispositifs, à la seule condition que la somme d’indices
d’équivalence de la sonnerie de tous les dispositifs n’excède
pas 5.
• Le nombre d’équivalents sonnerie (REN) de ce produit est
1,0.
• Les réparations sur un appareil certifié doivent être faites
par une société d’entretien canadienne autorisée par le Gouvernement canadien et désignée par le fournisseur. Toute
réparation ou modification que pourrait faire I’utilisateur de
cet appareil, ou tout mauvais fonctionnement, donne à la
compagnie de télécommunication le droit de débrancher
I’appareil.
• Pour sa propre protection, I’utilisateur doit s’assurer que les
prises de terre de I’appareil d’alimentation, les lignes téléphoniques et les tuyaux métalliques internes, s’il y en a, sont
bien connectés entre eux. Cette précaution est particulièrement importante dans les zones rurales
CAUTION
Au lieu d’essayer de faire ces branchements eux-mêmes, les
utilisateurs sont invités à faire appel à un service d’inspection
faisant autorité en matière d’électricité ou à un électricien,
selon le cas.
NOTE
Respecte les limites de la classe B de la NMB-003 du Canada.
Laser Safety
This machine complies with 21 CFR Chapter 1 Subchapter J as
a Class 1 laser product under the U.S. Department of Health
and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of
1968. This means that the machine does not produce hazardous radiation.
Since radiation emitted inside the machine is completely
confined within protective housings and external covers, the
laser beam cannot escape from the machine during any phase
of user operation.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the
U.S. Food and Drug Administration implemented regulations
for laser products on August 2, 1976. These regulations apply
to laser products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.
CAUTION
Use of controls, adjustments, or performance of procedures
other than those specified in this manual may result in hazardous radiation exposure.
The label is attached to the laser scanner machine inside the
machine and is not in a user access area.
xvii
xviii
Chapter
1
Before Using the Machine
This category describes the features of the machine and its useful functions.
Names and Functions on Each Part of the Machine1-2
Front Side
1-2
Back Side
1-3
Interior
1-4
Multi-purpose Tray (Manual Feed Slot)
1-5
Paper Cassette
1-6
Operation Panel
1-7
Main Operation Panel
1-7
Fax Operation Panel
1-8
LCD (Standby Mode)
1-9
Copy Mode
1-9
Fax Mode
1-9
Scan Mode
1-9
Text Input Method
1-10
Changing Entry Mode
1-10
Entering Letters and Symbols
1-10
Moving the Cursor (Entering a Space)
1-10
Deleting Characters
1-10
Setting the Sleep Timer
1-11
Setting the Current Date and Time
1-12
1-1
Names and Functions on Each Part of the Machine
This section describes the parts and functions of the machine.
Front Side
MF8350Cdn
Before Using the Machine
(1)
(2)
(3)
(4)
(7)
(8)
(9)
(10)
(11)
(5)
(6)
(16)
(17)
(14)
(15)
(12)
(13)
(18)
(13)
MF8050Cn
(1)
(2)
(7)
(8)
(9)
(3)
(13)
(14)
(4)
(11)
(12)
(10)
(13)
(15)
(5)
(6)
(1)
Document guides
Adjust to the width of the document.
(2)
Feeder
The feeder can automatically scan documents continuously.
(3)
(10) Power switch
Turns the power ON or OFF.
(12) Speaker
Multi-purpose tray (manual feed slot)
Use the tray when printing from the tray.
"Multi-purpose Tray (Manual Feed Slot)" (→P.1-5)
Paper cassette
(13) Lift handles
(14) Scanning area
Scans documents from the feeder.
(15) Output tray
Printed paper such as copies, prints and faxes come out from
the output tray.
Load the paper supply.
"Paper Cassette" (→P.1-6)
(16) Platen glass
Document feeder tray
(17) USB memory port
Place document.
Tray extension
Pull out the tray extension when the paper is hanging out of the
document feeder tray such as Legal size paper.
1-2
Document delivery tray
Documents are output.
Controls the machine.
"Operation Panel" (→P.1-7)
(5)
(8)
(9)
(11) Ventilation slots
Front cover
(7)
(18)
Operation panel
(4)
(6)
(16)
(17)
Place document.
Used to save scanned documents in a USB memory.
(18) Manual feed transport guide
Back Side
MF8350Cdn
(5)
(6)
(7) (8)
(3) (4)
Before Using the Machine
(1)
(2)
MF8050Cn
(1)
(2)
(4)
(5)
(3)
(8)
(7)
(6)
(1)
USB port
(5)
Connect the USB cable.
(2)
LAN port
Open this cover when clearing paper jams.
(6)
Connect the LAN cable.
(3)
(4)
Rating label
The current value indicated in this rating label shows the
average power current consumption.
Telephone line jack
Connect the telephone cable.
(7)
External telephone jack
(8)
Connect the external telephone.
Rear cover
Ventilation slots
Power socket
Connect the power cord.
1-3
Interior
MF8350Cdn
Before Using the Machine
(1)
(2)
(3)
(4)
(5)
MF8050Cn
(1)
(2)
(3)
(4)
(5)
(1)
Y (Yellow) toner cartridge slot
(4)
The Y (yellow) toner cartridge is installed in this slot.
(2)
M (Magenta) toner cartridge slot
The M (magenta) toner cartridge is installed in this slot.
(3)
C (Cyan) toner cartridge slot
The C (cyan) toner cartridge is installed in this slot.
1-4
K (Black) toner cartridge slot
The K (black) toner cartridge is installed in this slot.
(5)
Toner cartridge tray
Tray for installing the toner cartridges.
Multi-purpose Tray (Manual Feed Slot)
MF8350Cdn
(1)
(2)
Before Using the Machine
(3)
MF8050Cn
(1)
(1)
Paper guides
Adjust to the width of the paper.
(2)
The auxiliary tray (MF8350Cdn Only)
(3)
Tray extension (MF8350Cdn Only)
Open to prevent the paper from hanging out of the multipurpose tray when loading long-size paper such as Letter.
Be sure to pull out this tray when loading paper in the multipurpose tray.
1-5
Paper Cassette
MF8350Cdn
(2)
(2)
(3)
(1)
Before Using the Machine
(1)
MF8050Cn
(2)
(2)
(3)
(1)
(1)
Lock release lever
Hold this lever to slide the paper guides.
(2)
Paper guide
Adjust the position of the paper guides to the paper.
(3)
Lock release lever (changing cassette size)
When loading paper that is longer than A4 size, pull out the
paper cassette while holding this lever.
When the paper cassette is inserted with it extended, the front
side of the paper cassette is not flush with the front surface of
the machine as shown in the figure.
Set the legal dust cover on the paper cassette.
1-6
Operation Panel
Main Operation Panel
MF8350Cdn
(1) (2) (3) (4)
(5)
(6)
(7) (8) (9)
(12)
Before Using the Machine
(10)
(11)
(21) (20) (19) (18) (17) (16) (15) (14) (13)
MF8050Cn
(1) (2) (3) (4)
(5)
(6)
(7) (8) (9)
(10)
(11)
(12)
(21) (20) (19) (18) (17) (16) (15) (14) (13)
(1)
Copy function keys
• [N on 1] key
Reduces multiple-page documents automatically to copy
them on one sheet of paper
• [Collate] key
When making multiple copies, collates them in page order.
• [Enlarge/Reduce] key
Specify a copy ratio.
• [2-sided] key (MF8350Cdn only)
Specifies the settings for 2-sided printing.
• [Frame Erase] key (MF8050Cn only)
Specifies the settings for frame erasing when copying.
(2)
[Image Quality] key/[Density] key
(6)
Displays messages and operation status. Displays items, texts,
and numbers when you are specifying settings.
(7)
[Menu] key
Specifies or registers various settings.
(4)
[Status Monitor/Cancel] key
Checks or cancels jobs. You can also check the status of the
network and machine.
(5)
Mode switching keys
Switches the mode to copy, fax, or scan.
Numeric keys/[*] key/[#] key
• [Numeric] keys
Enter letters and numbers.
• [*] key
Switches the entry mode of characters. When sending a fax,
use this key to transmit the tone signal from the dial line.
• [#] key
Press to enter symbols.
(8)
[Report] key
Prints reports and lists. You can also specify whether to print a
report automatically.
Specifies the image quality or density.
(3)
LCD
(9)
[Toner Gauge] key
Checks the remaining amount of toner.
(10) [Energy Saver] key
Sets or cancels the Sleep mode manually. The key turns on
green when the Sleep mode is set.
(11) [ID] key
Press when setting the PIN mode.
1-7
(12) [Clear] key
(18) [Back] key
Deletes letters and numbers.
Returns to the previous screen.
(13) [Stop] key
(19) [Error] indicator
Cancels jobs.
Blinks when an error occurs.
(14) [Start] key
(20) [Processing/Data] indicator
Before Using the Machine
[B & W] key
Starts the copy/scan/fax operation in black and white.
[Color] key
Starts the copy/scan operation in color.
Blinks during transmission and turns on when the machine has
waiting jobs.
(21) [Select Paper/Settings] key
Registers a size and type of paper to be loaded in the paper
cassette or multi-purpose tray.
[Paper Select] indicator
The indicator for the selected cassette turns on.
(15) [Reset] key
Resets the settings. (Resets the copy/scan/fax mode to the
standard mode.)
(16) [View Settings] key
You can check the settings.
(17) [
]/[
]/[
]/[
] / [OK] key
• [ ] key
Selects an upper item or increases a value.
• [ ] key
Selects a lower item or decreases a value.
• [ ] key
Returns to the previous screen or moves the cursor.
Decreases the volume of communication sound when pressed
during the fax communication.
• [ ] key
Proceeds to the next screen or moves the cursor.
Increases the volume of communication sound when pressed
during the fax communication.
• [OK] key
Confirms specified or registered settings.
Fax Operation Panel
MF8350Cdn
MF8050Cn
(1)
(1)
(1) (2) (3)
(6) (5) (4)
(6) (5) (4)
(1)
[One-touch Speed Dial] keys
(4)
Specifies recipients registered under one-touch keys.
(2)
[Address Book] key
Searches recipients registered under one-touch keys or coded
dial codes.
(3)
[Redial] key
Redials a number which you dialed the last time using the
numeric keys.
1-8
(1) (2) (3)
[Coded Dial] key
Specifies recipients registered under coded dial codes.
(5)
[Pause] key
Adds pauses to fax numbers.
(6)
[Hook] key
Press when you want to dial without lifting up the handset of
the external telephone.
LCD (Standby Mode)
Fax menu screen
When the fax mode screen is displayed, you can select an item using [
This section describes the following screens.
• Copy Mode
• Fax Mode
• Scan Mode
or [
].
The currently selected item is displayed with white letters on a black
background, and pressing [OK] proceeds to the next screen.
NOTE- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Specify destination.
2010 01/01 12:52AM
Display of the standby mode
RX Mode: Auto
Resolution: 200 x 1...
Scan Mode
Scan mode screen
When using the scan function, press [
] to switch to the
standby display.
When the scan mode screen is displayed, you can select an item using
Copy Mode
[
Copy mode screen
] or [
Before Using the Machine
• You can change the standby display which appears when the main
power switch is turned ON.
e-Manual→ Basic Operation→ Customizing Settings→ Setting
the Default Screen
• If the machine remains idle for 2 minutes, the display returns to the
standby mode.
e-Manual→ Basic Operation→ Specifying the Auto Reset Timer
---------------------------------------------
]
].
The currently selected item is displayed with white letters on a black
When using the copy function, press [
] to switch to the
background, and pressing [OK] proceeds to the next screen.
standby display.
Select the scan type.
Copy: Press Start
100% 1 LTR
Density: +-0
Original Type: Text...
2-Sided: Off
1
Computer
Remote Scanner
Memory Media
Copy menu screen
When the copy mode screen is displayed, you can select an item using
[
] or [
].
The currently selected item is displayed with white letters on a black
background, and pressing [OK] proceeds to the next screen.
Copy: Press Start
100% 1 LTR
Density: +- 0
Original Type: Text...
2-Sided: Off
1
Fax Mode
Fax mode screen
When using the fax function, press [
] to switch to the
standby display.
Specify destination.
2010 01/01 12:52AM
RX Mode: Auto
Resolution: 200 x 1...
1-9
Text Input Method
Enter information into the machine using the following keys.
Moving the Cursor (Entering a Space)
Keys to be used for this operation
Move with [ ] or [ ].
Move the cursor to the end of the text and press [
space.
] to enter a
Before Using the Machine
Deleting Characters
Delete with [
] (Clear).
Pressing and holding [
] (Clear) key deletes all characters.
Example: Enter .
Tone, Numeric keys, Symbols, Clear
OK
Changing Entry Mode
1
2
Repeatedly press [
] to enter "C".
Register Username
C
Entry Mode: A
Register Username
Entry Mode: A
Select with [ ], and then press [OK]. You can
also press [
] (Tone) to change the entry mode.
Entry mode
3
Available text
Alphabet (capital letters) and symbols
Alphabet (small letters) and symbols
<12>
Numbers
Entering Letters and Symbols
Enter with the numeric keys or [
Keys used
Make sure that the input mode is .
Entry mode:
Entry mode:
Entry mode: <12>
@.-_/
@.-_/
1
ABC
abc
2
DEF
def
3
GHI
ghi
4
JKL
jkl
5
MNO
mno
6
PQRS
pqrs
7
TUV
tuv
8
WXYZ
wxyz
9
(Nonenterable text)
(Nonenterable text)
0
@./-_!?&$%#
()[]{}<>*+=
",;:'^`|\
@./-_!?&$%#
()[]{}<>*+=
",;:'^`|\
(Nonenterable text)
] to enter "A".
Register Username
CA
Entry Mode: A
4
] (Symbols)
Repeatedly press [
Repeatedly press [
] to enter "N".
Register Username
CAN
Entry Mode: A
5
Repeatedly press [
] to enter "O".
Register Username
CANO
Entry Mode: A
6
Repeatedly press [
] to enter "N".
Register Username
CANON
Entry Mode: A
7
Select with [
The entry is applied.
1-10
], and then press [OK].
Setting the Sleep Timer
The machine returns to sleep mode automatically when it is
not operated for a certain time.
4
Specify the time with [
[OK].
] or [
], and then press
You can also enter values using the numeric keys.
Keys to be used for this operation
Menu
10
minutes
(10-240)
5
Press [
] (Menu) to close the menu screen.
NOTE- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - When entering sleep mode
OK
[
Before Using the Machine
Sleep Timer
] (Energy Saver) turns on green.
To enter sleep mode manually
1
2
Press [
Press [
] (Menu).
Select with [
then press [OK].
Situations where the machine does not enter sleep mode
] or [
], and
Menu
Memory Media Settin...
Send/Receive Settin...
Printer Settings
Timer Settings
3
Select with [
press [OK].
] (Energy Saver).
• When the machine is in operation
• When the Processing/Data indicator lights or blinks
• When a message appears on the display and the Error indicator
blinks
• When the machine is operating such as adjusting and cleaning
• When a paper jam occurs in the machine
• When the handset of the external telephone is off the hook
When the machine resumes from the sleep mode
] or [
], and then
•
•
•
•
When pressing [
] (Energy Saver).
When printing starts after receiving a fax
When the external telephone is off the hook
When a print job is sent from a computer, and printing starts
---------------------------------------------
Timer Settings
Time & Date Settings
Sleep Timer
Auto Reset Timer
Auto Offline Time
1-11
Setting the Current Date and Time
Specify the display format of the date and time and set the
current date and time.
The specified date and time are used as the standard time for
functions that require it.
Settings
Before Using the Machine
Keys to be used for this operation
Overview
Operation
Specifies
the display
format of
date.
Select a display format with [ ] or [ ], and then
press [OK].
You can select a display format from the
following three options.
• YYYY MM/DD
• MM/DD/YYYY
• DD/MM YYYY
<12/24
Hour
Clock>
Specifies
the display
format of
time.
Select a display format with [ ] or [ ], and then
press [OK].
You can select a display format from the
following two options.
• 12 Hour (AM/PM)
• 24 Hour
Menu
Use the numeric keys to enter the date and
time, and then press [OK].
Move the cursor with [ ] or [ ].
Switch between and with [ ] or [ ].
Current Time Settings
OK
2010 01/01 12:52 AM
1
2
Press [
] (Menu).
Select with [
then press [OK].
] or [
], and
Specifies
the current
time and
date.
If you want to use the daylight saving time,
perform the following procedure.
1. Select with [ ] or [ ], and then press [OK].
2. Specify the starting date of the daylight
saving time.
- Select with [ ] or [ ], and then
press [OK].
Specifies
- Select the starting month, and then press [OK].
the daylight
- Select with [ ] or [ ], and then
press [OK].
saving time.
- Select the starting week, and then press [OK].
- Select the starting day, and then press [OK].
- Select with [ ] or [ ], and then
press [OK].
3. Specify the ending date of the daylight
saving time in the same way as you specified
the starting date.
Menu
Memory Media Settin...
Send/Receive Settin...
Printer Settings
Timer Settings
3
Select