Canon Imagepress C7010Vps C6010Vps C6010S Series Operation Manual C7010VPS/C6010VPS/C6010S Operating Information
2015-03-09
: Canon Canon-Imagepress-C7010Vps-C6010Vps-C6010S-Series-Operation-Manual-585884 canon-imagepress-c7010vps-c6010vps-c6010s-series-operation-manual-585884 canon pdf
Open the PDF directly: View PDF
Page Count: 400 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Copyright
- Contents
- Chapter 1 Preface
- Chapter 2 Main parts
- Overview of the machine configuration
- The main unit
- The paper modules
- The tab feeder (optional)
- The special feeder (optional)
- The automatic document feeder - ADF (optional)
- The color scanner (optional)
- The operator panel
- The operator attention light
- Finishing options
- The stacker/stapler, optional inserter and optional integrated punch unit
- The puncher
- Chapter 3 Operating concept
- Operating concept
- Access the Settings Editor
- Maintain the 'Media catalog'
- Maintain the 'Media families'
- Maintain the 'Color pre-sets'
- Maintain the 'Input profiles'
- Maintain the 'Output profiles'
- Maintain the 'Spot colors'
- Prepare print jobs with PRISMAprepare
- Prepare print jobs with the printer driver
- Manage production printing
- Chapter 4 Operator panel views
- Chapter 5 Power information
- Chapter 6 Print jobs
- General information
- Manage print jobs
- Media handling
- Introduction to the 'Schedule' view
- Load the media using the 'Schedule' view
- Description of the 'Trays' view
- Load the media using the 'Trays' view
- Introduction to the 'Media' section
- Introduction to the media handling
- Add temporary media to the 'Media catalog'
- Correct skewed and rotated images
- Perform a media registration
- Change the job settings before printing
- Change the output settings before printing
- Change '2-sided' into '1-sided' and vice versa
- Change the binding edge
- Select a different media for a job
- Change the settings for covers
- Shift the image roughly to create binding space
- Shift the image precisely to create binding space or correct the layout
- Change the print delivery settings
- Change the finishing method
- Chapter 7 Copy jobs
- General information
- Copy your documents
- Make a copy
- Combine subsets into 1 document
- Access other functions during a copy job or scan job
- The zoom behavior
- Create and use custom copy templates
- Rename a copy job
- Copy non-standard size originals
- Scan now and print later (postponed copying)
- Finish the output
- Adjust the image to improve the copy and scan quality
- Chapter 8 Scan jobs
- Chapter 9 Paper, toner, and staples
- Paper
- Load the media into the paper tray
- Adjust the paper tray to hold a different media size
- Load the media into the bulk media module (optional)
- Adjust the media size for the bulk media module (optional)
- Adjust the outer size change plate of the bulk paper module (optional)
- Load the media into the special feeder (optional)
- Load tabs via the tab feeder (optional)
- Adjust the media size of the tab feeder (optional)
- Load the required media into the selected tray.
- Check the status of the punch waste box
- Removing the punch waste
- Toner
- Staples
- Paper
- Chapter 10 Adapt printer settings to your needs
- Chapter 11 Maintenance and calibration
- Chapter 12 Specifications
- Chapter 13 Third-Party Software