Canon Pixma Mg3222 Setup Guide

Canon-Pixma-Mg3220-Inkjet-Multifunction-Printer-6223B002-Users-Manual-240051 canon-pixma-mg3220-inkjet-multifunction-printer-6223b002-users-manual-240051

Canon-Pixma-Mg3220-Quick-Start-Guide canon-pixma-mg3220-quick-start-guide

Manual MG3200_NonPC_EN Canon Pixma MG3220 Setup Manual | Manual Device

6223B002 to the manual a5c5b95f-65f8-4f1e-adda-ff266bf1bd2e

: Canon Canon-Pixma-Mg3222-Setup-Guide-589270 canon-pixma-mg3222-setup-guide-589270 canon pdf

Open the PDF directly: View PDF .
Page Count: 5

Download
Open PDF In Browser	View PDF

PIXMA MG3200
Setup Guide

© CANON INC. 2012

series

Setup Guide
This guide provides information for setting up a network connection for the printer.
Network Connection
Wireless Connection
Preparation for Connection
Printer Setup
Connection Using WPS
Troubleshooting

Network Connection
Wireless Connection
a Preparation for Connection
Before Starting Wireless Connection Setup
1. Make sure that the printer is turned on.
If the power is on, the LED (Light Emitting Diode) is lit as shown in the illustration below.

Notes on Wireless Connection
• Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your
printer to.

• The configuration, router functions, setup procedures and security settings of the network device vary depending on your
system environment. For details, refer to the manual of your network device or contact its manufacturer.
• Check if your device supports IEEE802.11n, 802.11g or 802.11b.
• If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the
security protocol for your device to something other than WEP and TKIP or change the setting to something other than
"IEEE802.11 n only."
• For office use, consult your network administrator.
• Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing
data such as your personal information to a third party.
• An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an
access point, is not supported. Be sure to prepare an access point.

b Printer Setup
1. Press and hold the Maintenance button (A) on the printer (for about 5 seconds).

2. Make sure that the LED flashes as shown in the illustration below.

c Connection Using WPS
1. Press the Fit to Page button (A).

2. Make sure that the LED flashes as shown in the illustration above, then press and hold the WPS
button on the access point within 2 minutes.
For details on pressing the WPS button, refer to the access point manual.
The (blue) Wi-Fi lamp on the printer flashes while searching for or connecting to the access point.

3. When wireless connection is complete, the LED lights up for about 3 seconds, then changes to "1" as
shown in the left illustration below. Make sure that the (blue) Wi-Fi lamp on the printer is lit.

The network connection setup is now complete.

Troubleshooting
WPS
 E>2>1
The error appears when wireless connection setup was not completed within 2 minutes after pressing the WPS
button.
• Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back
on.

 E>2>3
The screen appears when multiple access points are detected. Wait for a while, then configure WPS settings again.
Press the WPS button on only one access point.

 E>2>4
The screen appears when an error occurs.
Check the access point settings, then configure WPS settings again.

For details on how to check the settings of the access point, refer to the manual supplied with the access point or
contact its manufacturer.
 To configure WPS settings again

1. Press the Color button (A).

2. Press and hold the Maintenance button on the printer (for about 5 seconds).
3. Make sure that the LED flashes as shown in the illustration above.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Instance ID                     : uuid:b86a19e5-d596-4e06-a733-ccc8de8faafe
Document ID                     : adobe:docid:indd:6fb72152-d204-11e1-8fc3-dc8cff955adc
Rendition Class                 : proof:pdf
Derived From Instance ID        : 5e32e68f-d077-11e1-98b6-823e64cf001b
Derived From Document ID        : adobe:docid:indd:5e32e68e-d077-11e1-98b6-823e64cf001b
Manifest Link Form              : ReferenceStream
Manifest Placed X Resolution    : 72.00
Manifest Placed Y Resolution    : 72.00
Manifest Placed Resolution Unit : Inches
Manifest Reference Instance ID  : uuid:24021A69D3C4E111AD4CAD64A9B68B02
Manifest Reference Document ID  : uuid:23021A69D3C4E111AD4CAD64A9B68B02
Create Date                     : 2012:07:27 09:42:58+09:00
Modify Date                     : 2012:07:27 16:18:57+09:00
Metadata Date                   : 2012:07:27 16:18:57+09:00
Creator Tool                    : Adobe InDesign CS2_J (4.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 3924 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Layout                     : SinglePage
Page Count                      : 5
Creator                         : Adobe InDesign CS2_J (4.0.5)

EXIF Metadata provided by EXIF.tools