Canon Printer S600 Standard Color For Personal Use Users Manual #0 COVER PAGE

2015-01-23

• Introduction and Contents
  • I. ABOUT THIS MANUAL
  • II. TABLE OF CONTENTS
  • III. ILLUSTRATION INDEX
  • IV. TABLE INDEX
• Part 1 PRODUCT SPECIFICATIONS
  • I. PRODUCT OVERVIEW
    • 1.1 Product Overview
  • 2. SPECIFICATIONS
    • 2.1 Printer Specifications
      • 2.1.1 Printer specifications
      • 2.1.2 Printer service life
      • 2.1.3 BJ cartridge service life
    • 2.2 Paper Specifications
      • 2.2.1 Paper sizes and weights
      • 2.2.2 Paper types and settings
      • 2.2.3 Printing area
    • 2.3 BJ Cartridge Specifications
    • 2.4 Printer and Scanner Drivers
  • 3. PACKING CONFIGURATION
  • 4. PARTS CODE LIST
• Part 2 TROUBLESHOOTING
  • 1. PRINTER OPERATION
    • 1.1 Printer Operation Procedure
    • 1.2 Status Indicator
    • 1.3 Operating the Printer
      • 1.3.1 Cleaning operation
      • 1.3.2 Printing the nozzle check pattern
      • 1.3.3 Roller cleaning operation
  • 2. SERVICING
    • 2.1 Before Troubleshooting
    • 2.2 Detectable Problems from System Start to Exit
    • 2.3 Troubleshooting Problems
    • 2.4 Troubleshooting Error Indications
  • 3. DISASSEMBLY AND REASSEMBLY
    • 3.1 Cautions for Disassembly and Reassembly
      • 3.1.1 Cautions for ink stains (Ink path/ink mist)
      • 3.1.2 Damage by static electricity
      • 3.1.3 Deformation of spur tips
    • 3.2 Exploded View
    • 3.3 Disassembly and Reassembly
      • 3.3.1 Carriage lock release
      • 3.3.2 Removing and installing tap screws
      • 3.3.3 Installing and removing the carriage encoder film
      • 3.3.4 Handling encoder film
      • 3.3.5 Removing and installing the control board
      • 3.3.6 Removal of red screws prohibited
      • 3.3.7 Installing the logic board cover
      • 3.3.8 Handling the purge unit
      • 3.3.9 Installing the control ROM cover
    • 3.4 Adjustments and Settings After Disassembly and Reassembly
      • 3.4.1 Adjustments
      • 3.4.2 Applying grease
      • 3.4.3 Print head position adjustment
      • 3.4.4 Print head seam stripe adjustment
      • 3.4.5 Setting the EEPROM
  • 4. OPERATION CHECK AFTER DISASSEMBLY AND REASSEMBLY
    • 4.1 Check Procedure
  • 5. TRANSPORTING THE PRINTER
    • 5.1 Procedure
  • 6. PARTS REPLACEMENT, PERIODIC INSPECTIONS, & TOOLS
    • 6.1 Parts Replacement
    • 6.2 Periodic Inspections
    • 6.3 Tool List
  • 7. SERVICE-RELATED FEATURES
    • 7.1 Service Mode Operations
    • 7.2 Test Printout
    • 7.3 Printing the EEPROM Information
    • 7.4 Resetting the EEPROM
    • 7.5 Setting the Printer Settings in the EEPROM
• Part 3 TECHNICAL REFERENCE
  • 1. PRINTER CONTROL SECTION
    • 1.1 Printing Data and Control Signal Flow
    • 1.2 Print Drive Method
      • 1.2.1 Print drive control
      • 1.2.2 Print driving method
    • 1.3 Control During Printing
      • 1.3.1 2-dot Pair + Bi-directional printing
      • 1.3.2 Seam stripe control
      • 1.3.3 Rest between scans (Border detection control)
      • 1.3.4 Smear control and rest between pages
      • 1.3.5 Automatic power ON/OFF
      • 1.3.6 Print head protection from overheating
      • 1.3.7 Power motor control
    • 1.4 Detection Functions
      • 1.4.1 Detection by sensors
      • 1.4.2 Paper-end sensor
      • 1.4.3 Ink sensor (Same as for BJ F600)
      • 1.4.4 Cover sensor
      • 1.4.5 Pump sensor
      • 1.4.6 Internal temperature sensor
      • 1.4.7 Head temperature sensor
      • 1.4.8 ASF sensor
      • 1.4.9 Carriage encoder/paper feed encoder
    • 1.5 Other Sensing Features
      • 1.5.1 Waste-ink detection
      • 1.5.2 Print head detection
  • 2. ELECTRICAL DRIVE SECTION
    • 2.1 Block Diagram
    • 2.2 Electrical Section
  • 3. PRINTER'S MECHANICAL PARTS
    • 3.1 Overview of the Printer's Mechanical Parts
      • 3.1.1 Carriage
      • 3.1.2 Purge section
      • 3.1.3 Paper feed section
    • 3.2 Purge Section
      • 3.2.1 Purge section functions
      • 3.2.2 Purge section components
    • 3.3 Paper Feed Section
      • 3.3.1 Paper feed components
      • 3.3.2 Friction separation system
      • 3.3.3 Paper transport section
      • 3.3.4 Paper discharge section
  • 4. LOGIC BOARD COMPONENTS
  • 5. OPERATION WITH A COMPUTER
    • 5.1 Printing Operation with the Basic Settings Sheet
    • 5.2 Using the Utility Sheet
  • 6. INK SUCTION AMOUNT IN THE CLEANING MODE
  • 7. TECHNICAL REFERENCE
    • 7.1 Printing Mode List
  • 8. PRINT HEAD
• Part 4 APPENDIX
  • 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS
    • 1.1 Carriage Board
    • 1.2 Print Head