Canon S530D Instruction Guide 40 42266 Front

: Canon Canon-S530D-Instruction-Guide-589594 canon-s530d-instruction-guide-589594 canon pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

S530D

Start Here

Photo Printer

Easy Setup Instructions

1 Unpack the Printer

2 Prepare the Printer

3 Install the Print Head

1 Remove the shipping tape from the front

1 Carefully remove all items from the box.

1 Remove the print head from its package.

4 Install the Ink Tanks
1 Pull the orange tab off the yellow ink tank

(BCI-3eY), then remove and discard the
plastic wrapper.

and sides of the printer. Peel off the protective
film from the LCD panel.
Protective Film

the Printer
5 Connect
To Your Computer
1 Turn the printer off.

IMPORTANT: Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
2 Connect one end of the USB cable

to the computer, the other to the printer.
2 Turn the print head over, then remove

S530D
Photo Printer

the orange protective cap.
2 Twist off and discard the orange

Shipping Tape

protective cap.
Protective cap

2 Plug the power cord into the back of the

printer and connect the other end to a
power outlet.
Paper Rest
Output Tray

NOTE: Do not touch the electrical contacts.

Electrical contacts

NOTE: To avoid spilling ink, never press on
the sides of an ink tank.

3 Insert the ink tank into the correct slot.

USB Port

(Refer to the color guide on the print head.)
Press down gently until the ink tank locks
into place.

Bubble Jet Direct

REFERENCE GUIDE

3 Raise the gray lock lever.

3 Press the POWER button.
Documentation
and Software Kit

POWER
Lamp

USB Cable

POWER
Button

4 Insert the remaining three ink tanks into

DIF-B250

their assigned slots.
DIF-B100
CompactFlash™ Card Adapter

4 Gently slide the print head into the holder.

2 Cables

The print head will rest at a slight angle.
Do not press it down.
4 Open the front cover. The print head holder

automatically moves to the center. Remove
the protective tape.

5 Close the front cover and attach the
S530D Print Head

Power Cord

paper rest and output tray.

Continue with Step 6
on side two.
5 Lower the lock lever and gently press

it down until it locks into place.
Protective tape

Ink Tanks
BCI-3eC Cyan
BCI-3eM Magenta
BCI-3eBK Black
BCI-3eY Yellow

Serial number

Write down the serial number located to
the right of the print head. You will need
this later to register the product.

6 Install the Printer Driver (Windows )

6

7 Align the Print Head

Install the Printer Driver (Macintosh®)

W
in
do
ws

M
ac
in
to
sh

®

1 Be sure to TURN THE PRINTER OFF before

continuing.
POWER
Lamp

POWER
Button

5 When the Printer Port window appears,

TURN THE PRINTER ON so the printer port
(connection) can be automatically detected.

IMPORTANT: Drivers that ship with this
printer support Mac® OS 8.6-9.X. For Mac
OS X driver and instructions, go to our
Web site at www.canontechsupport.com.

7 After the computer restarts, TURN THE

PRINTER ON. Select the Apple menu,
then Chooser.

Before using the printer, align the print head to
ensure the best quality printing.
1 Add a stack of blank paper to the sheet feeder.
2 Start the alignment procedure.

1 Turn on your Mac and insert the “S530D

Windows:
a. For Windows XP, select Start, then Control
Panel. Then click on Printers and Other
Hardware, then Printers and Faxes.

Setup Software & User’s Guide” CD-ROM.

2 Open the Printer Driver folder on the

CD-ROM, then double-click the Installer icon.
NOTE: For Windows® XP or Windows 2000, log on
to Windows as a member of the Administrators
group before continuing.

IMPORTANT: If you see the Add New
Hardware Wizard, click Cancel.

8 Click the S530D icon in the Chooser. The

NOTE: For other Windows versions, click
Start, then Settings, then Printers.

printer name will highlight and move to
the right panel.

b. Right-click the Canon S530D icon, then
click Properties.
c. Click the Maintenance tab, then click the
Print Head Alignment icon.

NOTE: To use the Print Monitor, click the
Backgrounding button to the On position.

Macintosh:
a. From the File menu in a software
application, click Page Setup.
b. Click the Utilities button.
c. Click the down-arrow to select Test Print.
d. Click the Print Head Alignment icon.

The software will begin identifying the
printer port being used.
IMPORTANT: If your computer cannot
detect a printer port, refer to the
Troubleshooting chapter in the “S530D
Quick Start Guide” for instructions.

6 When the Terminate Installation window

appears, click OK.

3 Read the License Agreement and click

Accept, if you agree.
7 Follow the on-screen instructions to continue

with Product Registration.

2 Close any open software applications,

then insert the “S530D Setup Software &
User’s Guide” CD-ROM. The setup program
should run automatically.

NOTE: Remember to register your product
to ensure product support. The serial number
is located on the inside of the printer, to the
right of the print head.

4 Click Install. The printer driver will load

automatically.

10 Access your “S530D Setup Software &

User’s Guide” CD-ROM again. Open the
Memory Card Utility folder and double-click
the BJ Installer icon.

8 When the main menu appears, make

NOTE: If the setup program does not run,
click Start, then Run, then type D:\msetup.exe,
where D is your CD-ROM drive.

9 Close the Chooser.

sure that Other Driver is selected, then
click Install.

3 Read the License Agreement, then

5 If the message “No other applications can be

click Yes, if you agree.

running…” displays, click Continue.

4 When the main menu appears, make

11 Follow the on-screen instructions. When the

3 Click Yes (Windows) or OK (Macintosh) when

“Installation is completed” screen appears,
you can choose to Restart Now, or click Quit,
and access your CD-ROM again.

prompted if the pattern printed successfully.
4 Compare the different patterns for each color on

the printout:

sure that the Printer Driver is selected,
then click Install.
9 After installing the Other Driver successfully,

continue by making sure that Application is
selected, then click Install.

6 When the “Installation was successful”

screen displays, Restart your computer.
12 From the Application folder, double-click on

the software to be installed.
5 For each color on the test printout, enter the

number in the Print Head Alignment window
that corresponds with the smoothest looking
test pattern.

NOTE: If you are prompted to restart Windows,
remove the CD-ROM, then click OK. After the
computer restarts, insert the CD-ROM and
continue.
10 When the Terminate Installation window

appears, click OK, then Exit.
NOTE: For more information, refer to the
“S530D Quick Start Guide” or view the
electronic documentation on the CD-ROM.

11 Click Yes if you are prompted to restart

NOTE: Register your product to ensure product
support. The serial number is located on the
inside of the printer, to the right of the print
head.

13 Follow the on-screen instructions. When the

“Installation has Finished” screen appears,
click OK.
NOTE: For more information, refer to the
“S530D Quick Start Guide” or view the
electronic documentation on the CD-ROM.

14 When prompted, restart your computer.

finished.

your computer.
15 To ensure highest quality output, continue
12 To ensure highest quality output, continue

with Step 7 Align the Print Head.

6 Click OK (Windows) or Send (Macintosh) when

with Step 7 Align the Print Head.

Part no. QA7-2109
© 2002 Canon U.S.A., Inc.
Canon is a registered trademark of Canon Inc.
CompactFlash is a trademark of SanDisk Corporation.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
Printed in Thailand
40-42266-0502



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2002:06:03 09:12:08-08:00
Modify Date                     : 2002:10:07 11:05:02-07:00
Page Count                      : 2
Creation Date                   : 2002:06:03 17:12:08Z
Mod Date                        : 2002:06:03 17:12:08Z
Producer                        : Acrobat Distiller 5.0 for Macintosh
Author                          : Cheryl
Metadata Date                   : 2002:06:03 17:12:08Z
Creator                         : Cheryl
Title                           : 40-42266 S530D Front.AI

EXIF Metadata provided by EXIF.tools