Canon K30306 Wireless LAN Module User Manual K30306 USC22 May 2008 Ver0 8

Canon Inc Wireless LAN Module K30306 USC22 May 2008 Ver0 8

user manual

22-May-2008 Ver.0.8 Confidential 1/12 K30306 Wireless LAN Module IEEE802.11b/g K30306 Data Sheet
22-May-2008 Ver.0.8 Confidential 2/12 K30306 Document constituent list Control name Control No. Document Page General Items HD-AG-A****** 1/1 Absolute maximum ratings HD-AM-A****** 1/1 Electrical characteristics HD-AE-A****** 1/2-2/2 Circuit schematic HD-MC-A****** 1/1 Outline / Appearance HD-AD-A****** 1/1 Outline / Appearance HD-AD-B****** 1/1 Rev. record 19-Mar.-2008> Ver.0.5 Draft 08-Apr.-2008> Ver.0.6 Draft 17-Apr.-2008> Ver.0.7 Draft 22-May-2008> Ver.0.8 Draft
22-May-2008 Ver.0.8 Confidential 3/12 K30306 Control No. HD-AG-A****** (1/1) Control name General Items Scope This specification (“Specification”) applies to the hybrid IC “K30306” for use Wireless LAN module (“Product”). 1. Type: K30306 2. Function: Radio frequency transfer Module. (IEEE802.11bg standard conformity) 3. Application: PC peripheral 4. Structure: Hybrid IC loaded with silicon monolithic and GaAs semiconductor Ability of lead free mounting at customer's assembly (Heat resistance of this Product) : Yes Containment of hazardrous substance in this Product *This product conforms to RoHS Directive (2002/95/EC). 5. Outline: 5-pin Connector 6. Marking: Type, MAC address, Lot number 7. Features: -IEEE802.11b/g standard conformity Transmit speed: 11g (54/48/36/24/18/12/9/6Mbps) 11b (11/5.5/2/1 Mbps) Modulation: 11g (OFDM): BPSK, QPSK, 16QAM, 64QAM 11b (DSSS): BPSK, QPSK, CCK Channel Number: 1 to 11 channels Interface: USB Embedded ARM MPU for reducing loads on host processor Built-in EEPROM (128kbit), OSC (40MHz), Antenna (Vertical monopole pattern printing antenna), Connector 8. Security: WEP (64/128bit), TKIP (WPA), AES (WPA2) 9. Packing: Packaging method: Trey 10. Notes: a. Any question arising from this Specification shall be solved through mutual discussion by the parties hereof. b. This Product is not designed for radiation durable and should not be used under the circumstance of radiation. c. The operating conditions of this Product are as shown in this Specification. d. This Product mentioned in this Specification is manufactured for use in PC peripheral. This Product shall not be used in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added at design stage, all at the customer’s sole risk. e. Communication between this Product and others might not be established nor maintained depending upon radio environment or operating conditions of this Product and other ISM band at 2.4GHz products. f. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices.
22-May-2008 Ver.0.8 Confidential 4/12 K30306 Control No. HD-AM-A****** (1/1) Control name Absolute maximum ratings Absolute maximum ratings Rating Item Symbol Min. Typ. Max. Unit Remark Supply voltage VDD -0.3 4.0 V Storage temperature range Tstg -40 100 Degrees C Operation temperature range Topr -5 25 55 Degrees C Recommendation operating range Rating Item Symbol Min. Typ. Max. Unit Remark Supply voltage VDD 2.943 3.27 3.597 V
22-May-2008 Ver.0.8 Confidential 5/12 K30306 Control No. HD-AE-A****** (1/2) Control name Electrical characteristics DC Specifications The Specification applies for Topr.= 25 degrees C, Supply voltage=Typical voltage No. Parameter Condition Symbol Min. Typ. Max. Unit Remark 1 Operating Voltage 1 VDD - 3.27 - V 2 Peak Current1 Ip1 - - 537 mA 3 Power consumption1 Continuous (11g/6Mbps) Pc1 - 1550 1756 mW 4 Power consumption2 Burst Tx (11g/54Mbps) Pc2 - 820 850 mW Duty 17.8%5 Power consumption3 Burst Rx (11g/54Mbps) Pc3 - 804 847 mW 6 Power consumption4 Burst Tx (11b/11Mbps) Pc4 - 1035 1099 mW Duty 46.8%7 Power consumption5 Burst Rx (11b/11Mbps) Pc5 - 731 753 mW
22-May-2008 Ver.0.8 Confidential 6/12 K30306 Control No. HD-AE-A****** (2/2) Control name Electrical characteristics RF Specifications (WLAN 11g/54Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage No. Parameter Condition Symbol Min Typ Max Unit Remark1 RF frequency range FREQ 2412 2462 MHz 2 TX Power Po 10 12 14 dBm 1st Side Lobe M1 - -20 dBc 2nd Side Lobe M2 - -28 dBc 3 Spectrum Mask 3rd Side Lobe M3 - -40 dBc 4 Symbol clock tolerance Ft -25 25 ppm 5 Frequency tolerance Ft -25 25 ppm 6 EVM RMS EVM - 5.6 % 7 TX Out of band spurious1 f<2387MHz, 2496.5MHz<f TOS1 - 2.5 uW 8 TX Out of band spurious2 2387MHz<f<2400MHz, 2483.5MHz<f<2496.5MHz TOS2 - 25 uW 9 Rx sensitivity PER<10% SEN - -71 -65 dBm 10 Maximum Input Level PER<10% MIL -20 - dBm 11 RX Out of band spurious1 f<1GHz ROS1 - 4 nW 12 RX Out of band spurious2 f>1GHz ROS2 - 20 nW RF Specifications (WLAN 11b/11Mbps, CCK) The Specification applies for Ta=25 degrees C, Supply voltage=Typical voltage No. Parameter Condition Symbol Min Typ Max Unit Remark1 RF frequency range FREQ 2412 2462 MHz 2 TX Power Po 11 13 15 dBm 1st Side Lobe M1 - -30 dBc 3 Spectrum Mask 2nd Side Lobe M2 - -50 dBc Power up TU - 2 us 4 Power up-down rump Power down TD - 2 us 5 Frequency tolerance Ft -25 25 ppm 6 EVM Peak EVM - 35 % 7 TX Out of band spurious1 f<2387MHz, 2496.5MHz<f TOS1 - 2.5 uW 8 TX Out of band spurious2 2387MHz<f<2400MHz, 2483.5MHz<f<2496.5MHz TOS2 - 25 uW 9 Rx sensitivity PER<8% SEN -85 -76 dBm 10 Maximum Input Level PER<8% MIL -10 dBm 11 RX Out of band spurious1 f<1GHz ROS1 - 4 nW 12 RX Out of band spurious2 f>1GHz ROS2 - 20 nW
22-May-2008 Ver.0.8 Confidential 7/12 K30306 Block Diagram Connector Control No. HD-MC-A****** (1/1) Control name Circuit Schematic
22-May-2008 Ver.0.8 Confidential 8/12 K30306 Control No. HD-AD-A****** (1/1) Control name Outline/Appearance OUTLINE Unit: mm
22-May-2008 Ver.0.8 Confidential 9/12 K30306 Control No. HD-AD-B****** (1/1) Control name Outline/Appearance Indication label Size Material: PET (UL969)/ Label color: White
22-May-2008 Ver.0.8 Confidential 10/12 K30306 FCC Regulatory Information Canada Regulatory Information CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitter’s radiating structure and the body of the user or nearby persons. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may Cause undesired operation. CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitter’s radiating structure and the body of the user or nearby persons. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
22-May-2008 Ver.0.8 Confidential 11/12 K30306 R&TTE Directive Information This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. For Italy and France, this device may be limited to USE INDOOR only. CAUTION - Please note that this users manual should not be provided to end-users. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the requirement. Hereby CANON INC. declares that this Wireless LAN Module (Model No.: K30306) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of Conformity may be obtained at; CANON INC. 451, Tsukagoshi 3-chome, Saiwai-ku, Kawasaki-shi, Kanagawa 212-8530, Japan Telephone No.) 81-44-542-0164; Fax No.) 81-44-548-7524
22-May-2008 Ver.0.8 Confidential 12/12 K30306 Notice - At the installation of our Wireless LAN Module (Model No.: K30306) into the device, following information should be provided with end-user under the responsibility of the manufacture who integrates it into their device. The following sentence has to be displayed on the outside of the device in which the module is installed: "Contains Transmitter Module FCC ID: AZDK30306 / IC ID: 498C-K30306", or "Contains FCC ID: AZDK30306 / IC ID: 498C-K30306 " FCC Regulatory information CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitter’s radiating structure and the body of the user or nearby persons. To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may Cause undesired operation. Canada Regulatory information Operation is subject to the following two conditions: (3) this device may not cause interference, and (4) this device must accept any interference, including interference that may cause undesired operation of the device. L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (3) il ne doit pas produire de brouillage et l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitter’s radiating structure and the body of the user or nearby persons. R&TTE Directive information This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. For Italy and France, this device may be limited to USE INDOOR only. Hereby [Name of manufacture(*)], declares that this [type of equipment(*)] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC (*) Note: Please write in your company name and type of equipment into [ ].

Navigation menu