Canpow Technology CP510 wireless charger User Manual CP510

Shenzhen Canpow Technology Co., Ltd wireless charger CP510

User Manual

Car MountWireless ChargerCP510  USER GUIDEIn Box ItemsWireless Charger*1USB cable*1Holder*1User guide*1Product SpecificationInput:5V/2AOutput:  5V/1ACharging distance:≤8mmCharging efficiency:≥76%Dimensions:104mmx76mmx50mmCoil: single coilNotes1.Keep the charging pad and receiver away from water or any liquid.2.Cut off input power source during cleaning pad.3.Working temperature 0-45℃. Warranty1.One  year  warranty  service  from  the  date  you  buy  it.  We provide  the  free  service  or  product  exchange  within  the warranty period with any quality problem of product itself.  2.When  the  product cannot be repaired during the warranty period,  you  can  get  a  new  one  replaced  the  same  type  of product you purchased from us.  3.If other reasons such as strong impact, fire, water, and so on, lead the product failing to use, or aer warranty period, we will charge the repair fee when the product might be repaired and used again. Cauon:  Any  changes  or  modificaons  to  this  device  not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference  received,  including  interference  that  may  cause undesired operaon.The  device  has  been  evaluated  to meet general  RF  exposure requirement.  The  device  can  be  used  in  portable  exposure condion without restricon. FCC WarningThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.  These  limits  are  designed  to  provide  reasonable protecon  against  harmful  interference  in  a  residenal installaon.  This  equipment  generates,  uses  and  can  radiate radio  frequency  energy  and,  if  not  installed  and  used  in accordance  with  the  instrucons,  may  cause  harmful interference  to  radio  communicaons.  However,  there  is  no guarantee  that  interference  will  not  occur  in  a  parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to  correct  the  interference  by  one  or  more  of  the  following measures: • Reorient or relocate the receiving antenna.•  Increase  the  separaon  between  the  equipment  and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.
Product IntroductionProduct OutlineThis  is  a  smart  wireless  charging  product,  supporng  5W standard power charging. It’s designed  for car and perfectly compable with any Qi standard devices. No constraint, free and safe power charging experience.Applicable DeviceInstructions1.Devices  with  built-in  wireless  charging  receiver  module (Samsung S8, Iphone 8/8 Plus, Iphone X etc).2.Devices with reserved wireless charging input port (Galaxy S5, Galaxy Note4 etc).3.Wireless  charging  mod  or  case  with  receiver  module (iPhone5, iPhone 6/6 Plus etc).(Note:  Receivers must meet WPC standard)1.Put  the  holder  into  Auto-mobile  Air  Vent, Wireless  charger  can  change  the  rotaon  angle freely.Silicone padBig nut3.Open the clips on wireless charger2.Use USB cable to connect wireless charger with car charger; Put the car charger into the car cigaree mouth.4.Make the phone touch wireless charger center  buon,  the  clips  clamp  the  phone, then start charging immediately.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-Consult the dealer or an experienced radio/TV technician for help.

Navigation menu