Canpow Technology CP510 wireless charger User Manual CP510
Shenzhen Canpow Technology Co., Ltd wireless charger CP510
User Manual
Car Mount
Wireless Charger
CP510 USER GUIDE
In Box Items
Wireless Charger*1
USB cable*1
Holder*1
User guide*1
Product Specification
Input：5V/2A
Output: 5V/1A
Charging distance：≤8mm
Charging efficiency：≥76%
Dimensions：104mmx76mmx50mm
Coil: single coil
Notes
1.Keep the charging pad and receiver away from water or
any liquid.
2.Cut off input power source during cleaning pad.
3.Working temperature 0-45℃.
Warranty
1.One year warranty service from the date you buy it. We
provide the free service or product exchange within the
warranty period with any quality problem of product itself.
2.When the product cannot be repaired during the warranty
period, you can get a new one replaced the same type of
product you purchased from us.
3.If other reasons such as strong impact, fire, water, and so on,
lead the product failing to use, or aer warranty period, we will
charge the repair fee when the product might be repaired and
used again.
Cauon: Any changes or modificaons to this device not
explicitly approved by manufacturer could void your authority
to operate this equipment.
This device complies with part 15 of the FCC Rules. Operaon is
subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operaon.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condion without restricon.
FCC Warning
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful
interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference
to radio or television recepon, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Product Introduction
Product Outline
This is a smart wireless charging product, supporng 5W
standard power charging. It’s designed for car and perfectly
compable with any Qi standard devices. No constraint, free
and safe power charging experience.
Applicable Device
Instructions
1.Devices with built-in wireless charging receiver module
(Samsung S8, Iphone 8/8 Plus, Iphone X etc).
2.Devices with reserved wireless charging input port (Galaxy
S5, Galaxy Note4 etc).
3.Wireless charging mod or case with receiver module
(iPhone5, iPhone 6/6 Plus etc).
(Note: Receivers must meet WPC standard)
1.Put the holder into Auto-mobile Air Vent,
Wireless charger can change the rotaon angle
freely.
Silicone pad
Big nut
3.Open the clips on
wireless charger
2.Use USB cable to
connect wireless charger
with car charger; Put the
car charger into the car
cigaree mouth.
4.Make the phone touch wireless charger
center buon, the clips clamp the phone,
then start charging immediately.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.