Canpow Technology CP622 Wireless charger User Manual CP622 01

Shenzhen Canpow Technology Co., Ltd Wireless charger CP622 01

User manual

FurnitureWireless ChargerCP622 USER GUIDEIn Box ItemsWireless Charger*1USB cable*1User guide*1Product SpecificationInput:5V/2A, 9V/1.67AOutput:  5V/1A, 9V/1.1ACharging distance:≤8mmCharging efficiency:≥76%Dimensions:φ89mmx14.6mmNotes1.Keep the charging pad and receiver away from water or any liquid.2.Cut off input power source during cleaning pad.3.Working temperature 0-45℃. Warranty1.Two  years  warranty  service  from  the  date  you  buy  it.  We provide  the  free  service  or  product  exchange  within  the warranty period with any quality problem of product itself.  2.When  the  product cannot be repaired during the warranty period,  you  can  get  a  new  one  replaced  the  same  type  of product you purchased from us.  3.If other reasons such as strong impact, fire, water, and so on, lead the product failing to use, or aer warranty period, we will charge the repair fee when the product might be repaired and used again.
Product IntroductionProduct OutlineThis Charging Pad  is  one  intelligent wireless power charging product, supporng 10W quick charging(requiring adapter & receiving  device  to  support  QC2.0  9V/1.67A  charging),  and compable for 5W standard power charging. It’s designed for furniture  and  perfectly  compable  with  any  Qi  standard devices.  Without  cable,  it  brings  you  free and  safe  charging experiences.Applicable DeviceInstructions1.Devices  with  built-in  wireless  charging  receiver  module (Samsung S8, Iphone 8/8 Plus, Iphone X etc).2.Devices with reserved wireless charging input port (Galaxy S5, Galaxy Note4 etc).3.Wireless  charging  mod  or  case  with  receiver  module (iPhone5, iPhone 6/6 Plus etc).(Note:  Receivers must meet WPC standard)1.Insert the device into the hole, fix the 3 screws  from  boom with a screwdriver.Silicone padPower inputBayonetScrew2.Connect the adapter and the wireless charger with USB cable.3.Place device with wireless power receiver on  charger,  then  start charging immediately.
FCC StatementThe device complies with part 15 and 18 of the FCC Rules. FCC StatementFCC StatementOperation is subject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Changes or modifications not explicitly approved by the party responsible forcompliance could void the user's authority to operate this equipment.Note: this equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:--- Reorient or relocate the receiving antenna.--- Increase the separation between the equipment and receiver.--- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.--- Consult the dealer or an experienced radio/TV technician for help.The equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This device has been tested for human exposure limitsand found compliant at a minimum distance of 10cm during operation.Thus during the operation of device a distance of 10cm must be respected in everydirection.Radiation Exposure StatementRadiation Exposure StatementRadiation Exposure Statement

Navigation menu