Capital Prospect HU100 Alert System User Manual 15 HU 100 UserMan

Capital Prospect Ltd Alert System 15 HU 100 UserMan

15_HU-100 UserMan.pdf

Alarm System Starter KitiPhone not included.Protect your Home the Smart Way!Quick Guide 1. What’s Included 2. Setup the Hub 3. Insert Batteries for Sensors4. Download the SkylinkNet App.Internet Hub Motion Sensor 2 x Window/Door SensorKeychain Remote Mounitng AccessoriesPower Adapter Ethernet Cable1. Connect your Hub to an available Port on your Internet Router using the Ethernet cable.2. When finished press Continue.3. Insert 4 x AAA-Batteries in the Hub for backup power in case of power outage. (Optional)1. Push the both side in and open the cover of the Window/Door Sensor and insert a AAA-Battery.NOTE: 6 x AAA- and 1 x AA-Batteries required to setup the SkylinkNet Alarm System.1. Pull the “Tag Isolator” or use a coin to open the Motion Sensor and insert a AA-Battery.1. Tap on App Store 2. Tap on Search Icon and search for “Skylinknet”3. Tap on Free Buttonto download the App.4. When download is completed,it will show on your HomeScreen.NOTE: Only the “SkylinkNet” App will work withthe Internet Hub.5. Create & Activate the Hub1. Open the SkylinkNet App and tap on “Create Account”.2. Enter your information and tap on “Sign Up”.3. Check your email to activateyour account and tap on “Continue” to log in.4. Click on the link from the email to activate your account. 5. Now you are ready to login to your account.6. Setup the Hub1. Tap on “Set up Hub >”. 2. Tap on “Initialize a new Hub >”.3. Follow the instruction on screento connect the Internet Hub.5. Follow the instruction on screen to reset the Internet Hub and tap “Continue”.4. Enter your information and tap on “Continue”.6. Hub is added and you willsee a green or red dot indicating if it’s connected to the Hub.7. Add Sensors and Keychain Remote1. Go to “More” and tapon “System Settings”.2. Tap on “Setup Wizard”. 4. Tap on “Sensors” or “Security Remote”.3. Tap on “Add Device”.5. Select the type ofsensor you want to add.6. Name your sensor andlocation and tap “Continue”.7. Tap the “Learn Now”button and follow the videoto activate the sensor.(If you select Security Remote, skip to Step 6)8. Now trigger the sensorsto test if the SkylinkNet App is showing the sensor statuscorrectly.NOTE: If motion is detected, a red led light inside the sensor will flash. Sensor will not be triggered by new motion unless no motion has been detached for 15 seconds. FCC ID: KUTHU100
13. Arm Home / Arm Away 14. Disarm Alarm System 15. Keychain Remote8. Setup Hub Keypad Password 1. Go to “More”. 2. Tap on “System Settings”. 4. Enter Passcodeand tap on “Save”.3. Tap on ”Hub Keypad Password”.1. Go to “More”. 2. Tap on “System Settings”. 4. Set your time zoneand tap on “Save.”3. Tap on “Time Settings”.9. Home Screen Overview 10. Sensor Settings 11. Place the SensorsSettingsPush NoticationOnline/OineSensorsReceiversMenu BarSensor activationThe blue sensor icons will turn red if its activated.Receive push notification anytime a new activity takes place.Settings for individual sensor,remote or receiver.Shows the hub name and connection.Choose between different screens..Sensors icons are blue/red.Push icons areblack.Alarm Settings Push Notification ChimeLearnRenameDeleteSelect when this sensor should activate an alarm.Select if you want to receive a push notificationduring an alarm only or always when a sensor is activated.If enabled, the internet hub.will sound an alert chime whenthis sensor is activated.Learn the sensor with theinternet hub.Change the name of this sensor.Delete this sensor from the hub.Tap on the gearicon to edit the settings of thisspecific sensor.Arm Home Arm Away / Exit AwaySelect “Arm Away” to protect your home when your away. This mode activates or triggers the alarm after a default set of time, giving you enough time to get in and out ofyour house to arm/disarm the alarm system.Select “Arm Home” to protect while you’re at home. This mode deactivatesmotion sensors but leaves other sensors activated.When an alarm is activated, apush notification will be sent toall users and your smartphone willplay an alarm sound. Status of the Alarm SystemArmed Home, Armed Away Slide to activatethe hub siren inemergency.(Learn the sensor if you have selected“Learn Later” in Step 7 of “Add Sensorsand Keychain Remote).4. Setup Hub Keypad Password / Time Zone5. Setup Time Zone12. Alarm Screen OverviewSee all the recent actvities of the Alarm Systemon the Event Log.16. Event Log4. Tap on “Event Log”4. Tap on “System Settings”4. Go to “More”:Arm and disarm the alarm systemwith a keychainremote.Arm AwayArm HomeDisarmPanic ButtonPress and hold the Panic Buttonfor 5 sec. to activate it.Place each of the device in the appropriate locations (see example below).Tap the “Disarm” Button to disarm the alarm system.The motion sensor can be mounted with adouble-sidetapes or screws in a corner, straight wall, ceiling or stand freely by itself.Mount the Window/Door Sensor on your door or window with a double-sided tape or screws. It can be also installed to monitor or protect cabinets and safes.Learn the sensor with theChange the name of this sensor.Delete this sensor from the hub.“Learn Later” in Step 7 of “Add SensorsMount the Window/Door Sensor on your door or
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following tow conditions: (1)this device may not cause interference, and(2) this device must accept any interference, includinginterference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.

Navigation menu