Capital Prospect WB6X0 Remote Transmitter User Manual

Capital Prospect Ltd Remote Transmitter Users Manual

User Manual

WB-660 Series INSTALLATION INSTRUCTIONS Wireless Wall Control Model : WB-630 Congratulations on your purchase of the Skylink Wireless Wall Control model WB-660. This Wall Control is designed to operate the Skylink Atoms Garage Door Opener series. You will find the installation to be simple and be able to get the system up and running with little effort. ONE YEAR WARRANTY This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. If this product is defective, call 1-800-304-1187 for repair or replacement parts. Guarantee does not include normal wear and tear or batteries. If you have any questions, problems or missing parts, please call Skylink Customer Support: 9:00am – 5:00pm EST, Monday-Friday. 1-800-304-1187 Or e-mail us at support@skylinkhome.com CUSTOMER SERVICE 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 www.skylinkhome.com P/N:101Yxxx Rev0 SAFETY INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet dispositif ne peut causer des interférences; et (2) Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Package Contents Parts Description Quantity A Wall Control 1 B Mounting Accessories 1 Section 1- Overview 1 – Open/Close Garage Door Button 2- Light On/Off Button 3 – Remote Lock Button WARNING: - Wall Control must be installed within sight of the garage door, out of reach of children, at a minimum height of 5 feet (1.5m), and away from all moving parts of door. - Be sure power is not connected before installing the Wall Control. - Wall Control should only be activated when door can be seen clearly, is properly adjusted and there ae no obstructions to door travel. - Always keep garage door in sight until completely closed. Never permit anyone to cross path of closing garage door. Section 2- Installation of the Wall Control Note: Battery for the Wall Control is included. [Pix for reference only] 1. Pry off the back plate from the Wall Control. 2. Insert two AAA batteries (1.5V Alkaline Type). 3. Mount the back plate with the mounting accessories. 4. Attach the Wall Control on the back plate. Section 3 – Programming the Wall Control 1. Put the opener/receiver that you plan to program into programming mode. Refer to the User’s Instructions of that opener/receiver unit. 2. Once the opener/receiver is in programming mode, press the Garage Button (1) on the Wall Console to transmit the signal. 3. Once the Wall Console is programmed, the opener/receiver will quit from programming mode. 4. The Wall Console is ready to be used now to operate that opener/receiver. Section 4 - Operation of the Wall Console 1. To open/close the Garage Door, press the Garage Door button (1) once. The LED flashes quickly. 2. To toggle the light on/off, press the Light On/Off button (2). The LED flashes quickly. 3. Remote Lock Button (3) – Press and hold the button for 6 seconds to enable/disable the lock function. The opener will ignore all the remote radio signals when Lock function is enabled. Section 4 – LED light Indication Garage Door LED flashes once every 5 seconds Wall Console in Operating mode Garage Door LED flashes quickly Wall Console transmit signal Lock LED flash every 5 seconds. Remote Lock Enabled 213
WB-660 Series INSTALLATION INSTRUCTIONS Wireless Wall Control Model : WB-660 Congratulations on your purchase of the Skylink Wireless Wall Control model WB-660. This Wall Control is designed to operate the Skylink Atoms Garage Door Opener series. You will find the installation to be simple and be able to get the system up and running with little effort. ONE YEAR WARRANTY This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. If this product is defective, call 1-800-304-1187 for repair or replacement parts. Guarantee does not include normal wear and tear or batteries. If you have any questions, problems or missing parts, please call Skylink Customer Support: 9:00am – 5:00pm EST, Monday-Friday. 1-800-304-1187 Or e-mail us at support@skylinkhome.com CUSTOMER SERVICE 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 www.skylinkhome.com P/N:101Yxxx Rev0 SAFETY INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet dispositif ne peut causer des interférences; et (2) Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Package Contents Parts Description Quantity A Wall Control 1 B Mounting Accessories 1 Section 1- Overview 1 – Open/Close Garage Door Button 2 – Light On/Off Button 3 – Remote Lock Button 4 – Auto Closer Timer Setting Switch WARNING: - Wall Control must be installed within sight of the garage door, out of reach of children, at a minimum height of 5 feet (1.5m), and away from all moving parts of door. - Be sure power is not connected before installing the Wall Control. - Wall Control should only be activated when door can be seen clearly, is properly adjusted and there ae no obstructions to door travel. - Always keep garage door in sight until completely closed. Never permit anyone to cross path of closing garage door. Section 2- Installation of the Wall Control Note: Battery for the Wall Control is included. [Pix for reference only] 1. Pry off the back plate from the Wall Control. 2. Insert two AAA batteries (1.5V Alkaline Type). 3. Mount the back plate with the mounting accessories. 4. Attach the Wall Control on the back plate. Section 3 – Programming the Wall Control 1. Put the opener/receiver that you plan to program into programming mode. Refer to the User’s Instructions of that opener/receiver unit. 2. Once the opener/receiver is in programming mode, press the Garage Button (1) on the Wall Console to transmit the signal. 3. Once the Wall Console is programmed, the opener/receiver will quit from programming mode. 4. The Wall Console is ready to be used now to operate that opener/receiver. Section 4 - Operation of the Wall Console 1. To open/close the Garage Door, press the Garage Door button (1) once. The LED flashes quickly. 2. To toggle the light on/off, press the Light On/Off button (2). The LED flashes quickly. 3. Remote Lock Button (3) – Press and hold the button for 6 seconds to enable/disable the lock function. The opener will ignore all the remote radio signals when Lock function is enabled. 4. Door Closer Timer switch (4) – The opener has the option to program how long until the door closes automatically after it has been opened. To change the setting of this timer, simply slide the switch to the desired position. Slide switch position Function 0 Door Closer Timer Disabled. 3 The door will close automatically after 3 minutes. 10 The door will close automatically after 10 minutes 30 The door will close automatically after 10 minutes Section 5 – LED light Indication Garage Door LED flashes once every 5 seconds Wall Console in Operating mode Garage Door LED flashes quickly Wall Console transmit signal Garage Door LED flashes once every 5 seconds Closer Timer disabled Garage Door LED flashes twice every 5 seconds Closer Timer enabled Lock LED flash every 5 seconds. Remote Lock Enabled 2143

Navigation menu