Card Access Z2IR ZIGBEE TO IR INTERFACE DEVICE User Manual

Card Access Inc ZIGBEE TO IR INTERFACE DEVICE

User Manual

Regulatory ComplianceThe Card Access Z2iR ZigBee-to-IR Module complies with relevant standards established by the following regulatory bodies: Federal Communications Commission (FCC), Conformité Européene (CE), Industry Canada, and Restriction of Hazardous Substances (RoHS).FCCFCC ID: MHIZ2IR. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the Z2iR Module. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.by Card Access, Inc. void the user’s authority to operate the equipment.CEWe, Card Access, Inc. of 11778 South Election Road, Suite 260, Salt Lake City, Utah, 84020 USA, declare under our sole responsibility that the product, the Card Access Z2iR Module, Model Number Z2IR10A-ZP, to which this declaration relates, is in conformity with the following standards and / or other normative documents:EN60950, EN55022, EN55024We hereby declare that the above named product is in conformity with the essential requirements and other relevant provisions of Directive 1999/5/EC.The conformity assessment procedure referred to in Article 10(3) and detailed in Annex II of Directive 1999/5/EC has been followed.Industry CanadaIC: 3681C-Z2IR10AThis class B digital apparatus complies with Canadian ICES-003.CET appareil numerique de la classe B est conforme a la norme NMB-003 du Canada’ ZigBee-to-IR ModuleInstallationGuidePut MORE Automation in Home Automation.™FeaturesThe Card Access Z2iR ZigBee-to-IR Module is a wireless ZigBee interface with two independent IR emitter ports. It is powered from any 5V USB 2.0-compliant port supplying continuous power (even when the device with the USB port is turned off). The Module can connect any IR device into a Control4 home automation environment. The Z2iR Module also operates as a ZigBee® (IEEE 802.15.4) parent-rounting node which can improve ZigBee mesh density and footprint-often solving ZigBee problems when devices are installed on the edges of a mesh network.Supported Models and RequirementsThis documentation applies to the following Card Access productsZ2IR10A-ZP ZigBee-to-IR Module (single pack)Z2IR10A-ZP-10P ZigBee-to-IR Module (10 Pack)Important Safety InstructionsWARNING! You should install this device in accordance with all national and local electrical codes.IMPORTANT! This product is not intended for direct connections to IMPORTANT! Improper use or installation of this device can result in LOSS OF/DAMAGE TO PROPERTY.IMPORTANT! Using this product in any manner other than outlined in this document voids your warranty. Also, Card Access is NOT responsible or otherwise liable in any way for any damage resulting from the misuse of this product. See the section of this document entitled WARRANTY for details. What Is IncludedPower Source: 5VDC Power SupplyPower Usage: 100mA at 5VDC, fully activeDevice Temperature Range: Operational -20°F to 158°F (-28°C to 70°C) Humidity 5% to 95% Non-Condensing Storage -20°F to 158°F (-28°C to 70°C)Dimensions (LxWxD): 2.80”(L) x 1.75”(W) x 0.57(D)” (77.1mm x 44.5mm x 14.4mm)Communications: ZigBee (IEEE 802.15.4) 2.4 GHz, 15-channel, spread spectrum radioInstallation1 Place the ZigBee-to-IR Module in a location which ensures: Easy access to a power outlet Close proximity to the device(s) to be controlledNOTE: Make sure the ZigBee-to-IR Module gets good ZigBee wireless reception by:  Ensuring it is within 150 feet of another ZigBee device. Ensuring the device is not installed by other electrical equipment that may cause interference with the ZigBee signal (such as some cordless telephones or other devices that operate on the 2.4 GHz frequency). Avoiding exposure to extreme environmental conditions.2 Download the Z2iR DriverWorks Driver using Composer’s Online Driver Database or from the Card Access web site: www.cardaccess-inc.com/automation/drivers. (Copy the Driver to the “Control4 / Drivers” folder on your PC. The Control4 / Drivers folder should be located under “My Documents” on your PC.)3 Launch Composer. If Composer is already running, shut it down and restart it.4 Using Composer, make a connection to Director. Select the System Design Tab to add the Z2iR Driver. The Driver can be found by selecting the Search Tab and then the Local Database. The device type is “other” and the manufacturer is Card Access. NOTE: The Driver can be added to any room in the project.5 Power up the Z2iR Module using the supplied USB Power Supply and Mini USB cable. In Composer, choose Connections and click Z2iR” device. Identify the Z2iR in Composer by pressing the clear  Once the Z2iR’s MAC ID address appears in the Identify dialog box, click “Close” to close the dialog. After a few seconds, the Z2iR Module’s LED should change to a the Control4 project.TroubleshootingIf the Z2iR Module is not working it may need to be reset back to factory settings. To perform a factory reset, do the following: While the Z2iR Module is still powered on, press the button on the top cover 13 times.  After the Z2iR Module has performed its reboot sequence, the LED NOTE: Any IR codes that were cached in the Z2iR Module will be lost and will need to be re-transmitted and again cached in the Module. In most instances, there may be a slight delay device is cached or re-cached.Card Access Product SupportFor help on the installation or operation of this product, email or call Card Access Product Support. Please provide your exact model number and the MAC ID/Serial Number for the device. You may contact Product Support by phone (801-748-4900 x 1), by e-mail (dealersupport@cardaccess-inc.com) or on the Internet at http://www.cardaccess-inc.com/automation/support.This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Restriction of Hazardous Substances (RoHS)All parts in the Card Access Z2iR ZigBee-to-IR Module meet the material restrictions of RoHS, as proposed by the RoHS Technical Adaptation Committee. This is based upon information provided by suppliers of the raw materials used by Card Access, Inc. to manufacture these products. As such, Card Access, Inc. makes no independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this information.One-Year Limited WarrantyThis product is warranted to be free of defects in material and workmanship for one year from date of original purchase from Card Access, Inc. (“Card Access”).Card Access will, at its election and as the purchaser’s or end user’s sole and exclusive remedy for any breach of the limited warranty set forth above, repair and communicated to Card Access within the one-year period described above. Card Access is not responsible for removal or reinstallation costs. This warranty is not valid in cases where damage to this product is the result or arises out of misuse, abuse, incorrect repair or improper wiring or installation. To notify Card Access of any breach of the foregoing limited warranty and to obtain warranty service, contact Card Access Customer Support by e-mail to dealersupport@cardaccess-inc.com or by calling 801-748-4900, extension 1, to obtain a Return Materials Authorization (“RMA”) number and instructions for returning your defective product to Card Access.IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED, EXCEPT WHERE SUCH DISCLAIMER IS PROHIBITED BY APPLICABLE LAW. CARD ACCESS AND/OR THE SELLER DISCLAIM(S) ANY AND ALL LIABILITY FOR SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGE IN ANY WAY ASSOCIATED WITH OR RELATED TO THE PURCHASE, INSTALLATION AND/OR USE OF THIS PRODUCT. Some states/provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of special, incidental or consequential damages, so these limitations and exclusions may not apply rights which vary from state/province to state/province.This is Card Access’ exclusive written warranty.About This DocumentCopyright © 2012, Card Access, Inc. All rights reserved.Card Access and Put MORE Automation in Home Automation are trademarks of Card Access, Inc.ZigBee and ZigBee PRO are marks of the ZigBee Alliance. Control4 and DriverWorks are marks of Control4 Corp.Other marks may be the property of their respective owners.Contact Card AccessWeb: http://www.cardaccess-inc.com/automationEmail: dealersupport@cardaccess-inc.com Phone: +1.801.748.4900 Support: Extension 1 Sales: Extension 2Fax: +1.801.748.4901QSG-Z2IR-INST10

Navigation menu