Caretaker Systems 3-204-35 User Manual manual 8of8

Caretaker Systems, Inc. manual 8of8

manual 8of8

REMOTE CONTROLLER FUNCTIONSThe usefulness of the Prevent system is enhanced by the versatility of the Remote Controller. The pool and the surrounding area are always available for supervised use. The four modes described below allow a high degree of flexibility – while providing maximumprotection – without sacrificing the pleasure and enjoyment of owning a swimming pool.Try each of the modes. Watch and listen for the indications listed on the right side of each box.Reminder: Each click must occur within one second of the preceding click in order to register. Also, there is a one second delay following the last click before the desired action takes place.FALSE ALARM CANCEL MODEAllows the user to silence the alarm afterclearing the obstruction from the beampath. The alarm cannot be silenced If theobstruction remains in the beam path.•CANCELS a false alarm•Immediately returnsthe systemto FUN TIONAL ModeSWIM MODEAllows the user to break the laser beamand enter and leave the pool area for a30 minute period without sounding thealarm.•Lasers shut OFF•Green indicator lightonTransceiver FLASHES•Alarm CHIRPS every 30seconds•System RESETS in 30iWALK THROUGH MODEAllows the user to break the laser beamand enter the pool area without soundingthe alarm. Another single Click allowsthe user to leave the pool area.•Lasers shut OFF•Green indicator lightonTransceiver FLASHES•Alarm CHIRPS every 3dSET-UP MODEThis maintenance mode allows the userto align the Mirrors and Reflectors. Alarm will not sound when in the Set-upMode. A single Click will reset thesystem when adjustments are complet-ed.•Lasers are ON•Alarm is SILENCED•Green indicator lightonTransceiver FLASHES•Alarm CHIRPS every 224
Jeff Additions:Trouble Shooting Guide?Replacement Parts List25Battery: 3 Volt,LithiumT 2032ON 1 2Channel4 5 6 74 5 6 7Channel1 2ON1 2ON4 5 6 7Channel1 2Channel1(Factor 4 5 6 7ONCHANGING THE REMOTE CONTROLLER CHANNEL, AND REPLACING THE BATTERYThe Remote Controller provided with the Prevent system is capable of operating on four differentchannels. The factory setting is Channel 1. Occasionally, due to interference from other nearbyradio frequency devices, it is necessary to change to a different channel. Proceed as shownbelow.• Enter the Set-Up Mode byclicking the Remote 4 CLICKS.• Remove the cover from theTransceiver.• Open the Remote Controller byremoving the four screws fromthe bottom.• Set switches #1 & #2 in theRemote Controller, and switches#5 & #6 in the Transceiver tomatch one of the Channelcombinations shown at the right.• Do not change any other switchsettings.• Replace the covers.• Click the Remote 1 CLICK toreset the system.The life of the battery in the Remote Controller will vary withthe amount of use of the unit. It is recommended that thebattery be replaced once each year.INDICATOR LIGHTSTransceiver:Green Solid Light = Functional and ActiveGreen Blinking = In Set-up or Swim ModeRed Light Off = Batteries are charged and functionalRed Light Blinking = Batteries are low, check batteries. Refer to Page 14 for battery replacement instructionsRemote Controller:Red Light Blinks when button pushed = Normal functionNo Red Light when button pushed = Batteries need to be replaced
PREVENTLimited WarrantyThe Prevent Area protection system is warranted against defects in material andworkmanship, excluding batteries, for a period of one year from the date of purchase.The Prevent system which fails or become defective during the warranty period,except as a result of improper installation and/or maintenance, improper operation,improper environment, improper re-packaging or damage incurred in shipping, fire,wreckage, freezing, willful abuse, shall be repaired or replaced at our option withoutcharge within ten (10) days of the receipt of defective product, barring unforeseendelays. This warranty does not extend to consequential damages or othercircumstances including normal discoloration. CSI does not cover labor and shippingcharges which may be necessary to replace the product covered by this warranty. This warranty extends to the consumer who made the original retail purchase only,and is not enforceable by any other party.To obtain warranty replacements or repair, the defective portion of the system shouldbe returned, transportation paid, to:CSI15440 North 77th StreetScottsdale, Arizona 85260Should you have specific questions regarding the warranty or return contact us tollfree at 1-800-762-0647. CSI shall not be responsible for cartage, removal and/ orreinstallation labor, or any other such costs incurred in obtaining warrantyreplacements.Some states do not allow a limitation on how long an implied warranty lasts, or theexclusion or limitation of incidental or consequential damages, so the above limitationor exclusion may not apply to you .This warranty gives you specific legal rights, and you may also have other rightswhich vary from state to state.CSI...(logo)15540 North 77th Street Scottsdale, Arizona 852601-800-762-0647 Fax (602) 951-4319

Navigation menu