Carlson Wireless Technologies WIBRID-108 High Powered 802.11a/g WLAN Mini-PCI 3A User Manual manualpage

Manual

INFORMATION TO BE INCLUDED IN CARLSON WIRELESS PRODUCTS

USING WIRELESS MODULE

FCC ID: OPA-WIBRID-108

IC: 3448A-WIBRID108

RF EXPOSURE COMPLIANCE

Products that include the Carlson Wireless RF module described above, when

incorporating the use of the 20 dBi panel antenna certified for use with this module, shall

include the following statements in a prominent location in the installation/user manual:

RF Exposure Information

To meet the FCC and Industry Canada limits for human exposure to radio frequency

fields, the antenna must be installed so that a minimum separation distance of 55cm

between persons and antenna shall be maintained at all times during radio operation.

NOTE TO INSTALLER

In the 5.725-5.850 MHz unlicensed band, for point-to-multipoint operations, power to

the 20dBi flat panel antenna must be reduced so that the maximum eirp is 36 dBm or

less. For exclusive point-to-point operation, no reduction in maximum allowed output

power (25.8 dBm) is required.

For products used in the 4.9 GHz Public Safety band, depending on license type and

operations, power may need to be reduced to limit eirp and power spectral density, for

operations that are not point-to-point or point-to-multipoint.