Carpoint CP-X370 Car Navigation User Manual eManual XROAD370

Download:
Mirror Download [FCC.gov]
Document ID	466456
Application ID	cTGVBdh1myYkP5oX8lUawQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.28kB (1003456 bits)
Date Submitted	2004-09-08 00:00:00
Date Available	2004-09-07 00:00:00
Creation Date	2004-05-04 14:19:35
Producing Software	Acrobat PDFWriter 4.0 Windows NT¿ë
Document Lastmod	2004-09-03 17:56:29
Document Title	eManual_XROAD370
Document Creator	Microsoft PowerPoint - [eManual_XROAD370]
Document Author:	pinkgirl5

X-Road User’s Manual
User’s Manual
Description
① Display : Points current position
①
② Zoom in & out : Enlarge and
reduce a scale, pressing + , buttons
③ POP-UP Menu : Display & Hide
④ Message Ramp : Indicate the
direction to turn right or left by
following appropriate light
⑤ Destination : Destination Index
FCC NOTICE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED
OPERATION.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difference from that to which
the receiver is connected.
- Consult the dealer of an experienced radio/TV technician for help.
NOTE : The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
Set Up
1. Determine proper place to
put on the front windshield.
- Avoid the place that would
interfere driving.
2. Adjust it to fix to the right
direction against the driver ’s
view point.
- Wipe out the spot to put.
- Move the arm to the right angle
for the driver.
- Do not place X-Road right in front
of the driver so that it cannot fell
down to the driver in case of
accident.
- Do not try to fix while driving.
3. Inhale the air after placing
the arm.
- After placing the transparent
disk against the windshield,
push the inhalation button.
- Wipe out the spot to place to keep it
dropped.
Set Up
4. Connect cable to power
from cigar jack.
- The navigation system will
automatically started putting
power on.
※ Do not place cable into car-pack.
※ Must inject cable to cigar jack
after starting your car.
5. Connect to the main system
- Push the main system until
the basket operates to lock.
※ How to separate the main system
- Pull the main system pushing
the button on the basket.
Please place the main system after completion of setting the
arm to the windshield. Otherwise the system would be hard to
place or consequently be broken.
Map Guide
Level of
Map
Scale
① Level of Map : Scalable from 1 to 9 level.
② Direction :Arrow aims north.
③ Start/Stop Operation :
To start
operating navigation system and to
stop it
④ Display of current location of the car :
Points where you are.
Current Location
Manu Bar
Start/Stop Op.
⑤ Menu Bar : Choose menu.
GPS Condition
Scale up & down
Level of Map
Scale
15km
4km
2km
600m
240m
120m
60m
30m
15m
Menu Bar
Menu
MENU
NAVI
MARK
TRIP
POI
Function
Destination/Route Manager/
My POIManager/Settings/
Simulation
Address/Intersection/POI/
My POI/Route List
Bookmark of location
(address) and point of interest
Record the mileage, speed,
time of driving
Point out nearby places such
as airports, banks, etc.
How to use - MENU
Destination
Browse destination by
address
Input destination by order of State ->City >Street->House using scroll bar or keypad
under the screen
①
②
③
④
MAP : Display the destination
My POI : Save destination in My POI
GO : Start operation to the destination
Cancel : Go back to the previous stage
< : erase
<<, >> : move
MENU>>Destination>>Address
How to use – MENU
Destination
- Intersection
Input intersection by order of State ->City >Street->House using scroll bar or keypad
under the screen.
①
②
③
④
MAP : Display the destination
My POI : Save destination in My POI
GO : Start operation to the intersection
Cancel : Go back to the previous stage
< : erase
<<, >> : move
MENU>>Destination>>Intersection
How to use - MENU
Destination
- POI
Information of nearby points of interests from
the nearest point
Index : My POI / Exhibition / Airport / Ferry /
Bank-Post / Fwy service / Car / Government /
Church / Hospital / City Centre / Hotel /
Museum / Restaurant / Park / Shopping /
Sports / Petrol / Theatre / Police /
Tourist info / Railway / Other…
* POI : Point Of Interest
MENU>>Destination>>POI
How to use – MENU
Destination
- POI
List of interest points user selects
(ex. Airport)
①
②
③
④
MAP : Display the destination
My POI : Save destination in My POI
GO : Start operation to the destination
Cancel : Go back to the previous stage
< : erase
<<, >> : move
MENU>>Destination>>POI
How to use - MENU
Destination
- My POI
List of the saved POI user bookmarked
Show the list by alphabetical order by using
<<, >> button
① Map : Display the destination from the list
② GO : Start operation to the destination on
the list
③ Cancel :Go back to the previous stage
MENU>>Destination>>My POI
How to use – MENU
Destination
- Route List
Show the list of routes on which user actually
drove from the latest one (including S (Origin)
/ E (Destination))
① MAP : Display the destination
② Reserve Route : Start operation from the
destination to the origin
③ Delete : Erase the record
④ Simulation : Test drive along the selected
route
⑤ GO : Start operation to the destination
⑥ Cancel : Go back to the previous stage
MENU>>Destination>>Route List
Components
Main System
Data Cable
Arm
Stylus Pen
Power Cable
Fixing Pad for
Data Cable
Compact Flash
(256M)
User’
s Manual
How to use MENU
Route Manager
- Route Option
Setting Options for Routing
① Route Method : Quickest / Shortest
② Toll Roads : Include / Exclude
③ Freeway : Speed Detection Alarm Setting
by Using <<, <, >, >> Button
④ Highway : Speed Detection Alarm Setting
by Using <<, <, >, >> Button
⑤ Main : Speed Detection Alarm Setting by
Using <<, <, >, >> Button
⑥ Residential : Speed Detection Alarm Setting
by Using <<, <, >, >> Button
MENU>>Route Manager>>Route Option
How to use - MENU
Route Manager
- Current Route/ - Route List
Current Route
: Save and Erase recent record of driving
① Erase : Erase the recent record of driving
② Save : Save the recent record of driving.
③ Test : Test driving along the recent record
of driving
Route List
: Display the origin and destination of recent
driving.
: Select Reverse Route, Delete, Simulation,
GO, Point on the Map
MENU>>Rute Manager>>
Current Route/Route List
How to use – MENU
MY POI Manager
- Save Position
Save or Delete My POI by choosing icons or
rename
① Save : Save or Modify POI
② Rename : Save or Modify POI by using keypad
③ Cancel : Go back to the previous stage
MENU>>MY POI Manager>>Save Position
How to use - MENU
MY POI Manager
- Save Address
Input POI by order of State ->City ->Street>House using scroll bar or keypad under the
screen
①
②
③
④
Map : Display the destination
My POI : Save the destination in My POI
GO : Start operation to the destination
Cancel : Go back to the previous stage
< : erase
<<, >> : move
MENU>>MY POI Manager>>Save Address
How to use – MENU
MY POI Manager
- Edit My POI
Modify or Delete the information on My POI
①
②
③
④
Del : Delete POI
Edit : Edit POI
Map : Position POI on the map
Cancel : Go back to the previous stage
MENU>>MY POI Manager>>Edit My POI
How to use - MENU
Settings
Setting options of Display
①
②
③
④
Volume : Adjust volume for information
GPS Info : GPS Receiving Info.
Speed Alert : Speed Alert on/off
Display Options
- Display Mode : Map/Text/Split
- Map Mode : Heading up/North up/3D
- Color : Auto/Day/Night
- Auto Zoom in Guide : None/6-9 level
- Auto Zoom at 80km/h : None/3-6 level
- Auto Zoom at 40km/h : None/6-9 level
⑤ Map Labels :
- POI Icon : on/off
- POI Name : on/off
- Street Name : on/off
MENU>>Settings
How to use – MENU
Simulation
Test driving setting origin, destination, transit
①
②
③
④
⑤
Set Destination
Start Destination
Set Transit
Test : Start Operation
Cancel : Go back to the previous stage
MENU>>Simulation
How to use menu bar – NAVI, MARK, TRIP, POI
① NAVI : Destination on MENU
② MARK : MY POI Manager on MENU
③ TRIP : Reference of Driving record as
shown in the picture on left (Speed,
Distance, Time, etc.)
④ POI : POI on MENU
How to use – MENU
Simulation
Display sub-menu by pop-up screen on the map
①
②
③
④
⑤
⑥
Murry ST : Name of the street where you ARE
Set Destination : Point location on the map
Set Start Location : Point location on the map
Set Transit : Point location on the map
Save To My POI : Point location on the map
GO : Go to the destination
Use XROAD button on the bottom of the screen
Operation Example – Screen Division
Next turn : Direction/Distance
Name of the Street to Turn
Driving/
Finish
Current Position
Time & Distance to Destination
Next Turn : Direction/Distance/Name
Screen Selection (Viewer Mode)
3 types of viewer mode while operation : Map/Text/Split Mode
Setting :
① MENU>>Settings>>Display Options>>Display Mode
② Press [XROAD] button to change mode
[Map Mode]
[Text Mode]
[Split Mode]
Setting Display
Setting display mode for the different environment or by the driver’
s preference
(MENU>>Settings>>Display Options>>Map Mode)
[① Day Mode]
[② Night Mode]
[③ Auto Mode] : Automatic transition from Day Mode to Night Mode and vice versa

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 14
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:57a3426b-8713-45a5-b04d-eea732541b5c
Producer                        : Acrobat PDFWriter 4.0 Windows NT¿ë
Modify Date                     : 2004:09:03 17:56:29+09:00
Create Date                     : 2004:05:04 14:19:35Z
Creator Tool                    : Microsoft PowerPoint - [eManual_XROAD370]
Metadata Date                   : 2004:09:03 17:56:29+09:00
Document ID                     : uuid:7c512f50-dda5-4b72-90da-763e290ae7a3
Format                          : application/pdf
Title                           : eManual_XROAD370
Creator                         : pinkgirl5
Author                          : pinkgirl5

EXIF Metadata provided by EXIF.tools