Carrier 50Xt Users Manual P1 6
50XT to the manual 23c785cd-d9f9-4aef-be01-f51f5d18f476
2015-01-24
: Carrier Carrier-50Xt-Users-Manual-310832 carrier-50xt-users-manual-310832 carrier pdf
Open the PDF directly: View PDF 
.
Page Count: 38
| Download | |
| Open PDF In Browser | View PDF |
50XT
Infinity 15t SEER Single---Packaged Heat Pump System
with Puronr (R---410A) Refrigerant
Single Phase
2---5 Nominal Tons (Sizes 024---060)
Product Data
Comfort Heat Pump System with IdealHumidityt featuring
Infinityt control variable--speed blower motor and two--stage
cooling and heating that provides greater comfort, humidity
control, and energy efficiency.
Variable--speed blower motors provide better comfort and energy
efficiency. You can expect up to 30 times better dehumidification;
economical constant airflow which provides improved indoor air
quality and more even temperatures from room to room; and
reduced indoor noise due to lower air velocity. In addition, you’ll
realize improved installation flexibility with 3 different airflow
choices for best overall comfort.
Easy installation
Factory--assembled package is a compact, fully self--contained heat
pump unit that is pre--wired, pre--piped, and pre--charged for
minimum installation expense. 50XT units are available in a
variety of standard capacity ranges. Units install easily on a rooftop
or at ground level.
Durable, dependable components
A05307
Fig. 1 -- Unit 50XT
Single--Packaged Products with energy--saving features and
Puron® refrigerant.
S Up to 15.5 SEER
S Up to 8.0 HSPF
S Up to 12 EER at 95°F (35°C) OD
S Low Sound Levels
S Variable--Speed Blower (Standard)
S Factory--Installed TXV
S Two--stage cooling and heat pump operation
FEATURES/BENEFITS
One--piece Heat Pump unit with optional electric heater, low
installation cost, dependable performance and easy maintenance.
Efficient operation
High--efficiency design with SEERs (Seasonal Energy Efficiency
Ratio) of up to 15.5.
Puron® environmentally--sound refrigerant is Carrier’s unique
refrigerant designed to help protect the environment. Puron is an
HFC refrigerant which does not contain chlorine that can harm the
ozone layer. Puron refrigerant is in service in millions of systems
proving highly reliable, environmentally sound performance.
Compressors have two stages of cooling and heating and are
designed for high efficiency. Each compressor is hermetically
sealed against contamination to help promote longer life and
dependable operation. Vibration isolation provides quiet operation.
Compressors have internal high--pressure and overcurrent
protection.
Convertible duct configuration
Unit is designed for easy use in either downflow or horizontal
applications. Each unit is easily converted from horizontal to
downflow with two duct covers (available as an accessory).
Downflow operation is easily provided in the field to allow vertical
ductwork connections. The basepan utilizes knockout style seals
on the bottom openings to ensure a positive seal in the horizontal
airflow mode.
Direct--drive, variable--speed blower motor is standard on all
50XT models.
Direct--drive, PSC condenser fan motors are designed to help
reduce energy consumption and provide for cooling operation
down to 55°F (12.7°C) outdoor temperature. Low--ambient
cooling is available below 55°F (12.7°C) when low--ambient
cooling is enabled in the User Interace (UI). Motormaster® II
low--ambient kit is not required.
Infinityt User Interface is designed to work as a system with
Carrier’s single--packaged product.
Refrigerant system is designed to provide dependability. Liquid
refrigerant filter driers are used to promote clean, unrestricted
operation. Each unit leaves the factory with a full Puron refrigerant
charge. Refrigerant service connections make checking operating
pressures easier.
Indoor and outdoor coils are computer designed for optimum
heat transfer and cooling efficiency. The indoor coil is fabricated
from copper tube and aluminum fins and is located inside the unit
1
50XT
for protection against damage. The outdoor coil is internally
mounted on the top tier of the unit. Copper fin coils and pre--coated
fin coils are available from the factory by special order. These coils
are recommended in applications where aluminum fins are likely to
be damaged due to corrosion. They are ideal for seacoast
applications.
Thermostatic expansion valve (TXV) —A hard--shutoff, balance
port TXV maintains a constant superheat at the evaporator exit
(cooling cycle) resulting in higher overall system efficiency.
High-- and low--pressure switches give added safety and
reliability to the compressor.
Low sound ratings ensure a quiet indoor and outdoor
environment with sound ratings as low as 75 dBA.
Easy to service cabinets provide easy single--panel accessibility to
serviceable components during maintenance and installation. The
basepan, with integrated drain pan, provides easy ground level
installation with or without a mounting pad. Convenient handholds
are provided to manipulate the unit on the job site. A nesting
feature ensures a positive basepan to roof curb seal when the unit is
roof mounted. A convenient 3/4--in. wide perimeter flange makes
frame mounting on a rooftop easy.
Louvered grille provides hail and vandalism protection for the
coil.
Cabinets are constructed of heavy--duty, phosphated, zinc--coated,
pre--painted steel capable of withstanding 500 hrs of salt spray.
Interior surfaces of the evaporator and electric heater compartments
are insulated with cleanable, semi--rigid insulation board, which
keeps the conditioned air from being affected by the outdoor
ambient temperature and provides improved indoor air quality.
(Conforms to American Society of Heating, Refrigeration and Air
Conditioning Engineers No. 62P.) The sloped drain pan minimizes
standing water in the unit, which is provided with an external
drain.
Short--cycling protection for the compressor is incorporated into
our Infinity heat pump/air conditioner dual capacity control board
ensuring a five--minute delay before restarting compressor after
shutdown for any reason.
Limited Warranty—Standard 5--year limited warranty on all parts
and 10--year limited warranty on compressor.
TABLE OF CONTENTS
FEATURES/BENEFITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1--2
MODEL NUMBER NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ARI CAPACITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PHYSICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
OPTIONS AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5--6
BASE UNIT DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7--8
ACCESSORY DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SELECTION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PERFORMANCE DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11--30
TYPICAL PIPING AND WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
APPLICATION DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ELECTRICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
TYPICAL WIRING SCHEMATICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
GUIDE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36--37
2
MODEL NUMBER NOMENCLATURE
50XT
024
–––
3
0
1
––
Options
Type of Unit
50XT - Packaged
Electric Heat Pump
BT CC CU TP -
AL evap, vinyl condens
AL evap, CU condens
CU evap & condens
Base unit with tin plated
indoor coil hairpins
TV - TP with vinyl coating on outdoor coil
TC - TP with AL indoor coil and
CU/CU outdoor coil
Nominal Cooling Capacity
024 - 2 Ton
030 - 2.5 Ton
036 - 3 Ton
042 - 3.5 Ton
048 - 4 Ton
060 - 5 Ton
Only used if ordering an option
Packaging
N/A
LEGEND
AL - Aluminum
CU - Copper
50XT
Series
Electrical Supply
3- 208/230-1-60
ARI* CAPACITIES
Cooling Capacities and Efficiencies
UNIT
50XT
024
030
036
042
048
060
NOMINAL
TONS
2
2--1/2
3
3--1/2
4
5
STANDARD CFM (High/Low Stage)
(Cooling & Heating)
800 / 600
1000 / 700
1200 / 850
1500 / 975
1600 / 1100
1750 / 1200
NET COOLING CAPACITIES (Btuh)
(High/Low Stage)
22,600 / 17,600
28,600 / 21,400
34,600 / 24,400
40,500 / 29,000
46,000 / 33,400
57,000 / 40,500
EER @A{
SEER‡
11.4
11.6
12
11.6
11
11
15.5
15.0
15.0
15.0
15.0
14.5
Heating Capacities and Efficiencies
UNIT
50XT
024
030
036
042
048
060
HIGH HEAT CAPACITY
(BTUH) @ 47°F (8.3°C)
(High/Low Stage)
20,800 / 16,800
27,600 / 20,400
33,600 / 23,000
39,500 / 27,600
45,500 / 32,200
56,000 / 39,500
HIGH HEAT COP
@ 47°F (8.3°C)
(High/Low Stage)
3.3 / 3.2
3.5 / 3.5
3.4 / 3.4
3.6 / 3.5
3.3 / 3.5
3.2 / 3.3
LOW HEAT CAPACITY
(BTUH) @ 17°F (-- 8.3°C)
(High/Low Stage)
11,600 / 8,400
14,000 / 9,600
17,200 / 11,200
20,600 / 14,200
25,000 / 15,200
30,800 / 20,400
{ ”A” conditions---80°F (26.6°C) indoor db/67°F (19.4°C) indoor wb & 95°F (35°C) outdoor db.
LOW HEAT COP
@ 17°F (-- 8.3°C)
(High/Low Stage)
2.2 / 1.8
2.1 / 1.9
2.4 / 1.7
2.3 / 2.0
2.4 / 1.9
2.2 / 1.9
HSPF‡
} Rated in accordance with U.S. Government DOE (Department of Energy) test procedures and/or ARI Standards 210/240.
** Tested in accordance with ARI Standard 270 ---95 (not listed in ARI).
NOTES:
1. Ratings are net values, reflecting the effects of circulating fan heat. Ratings are based on:
Cooling Standard: 80°F (26.6°C) db, 67°F (19.4°C) wb indoor entering ---air temperature and 95°F (35°C) db outdoor entering---air temperature.
2. Before purchasing this appliance, read important energy cost and efficiency information available from your retailer.
LEGEND
dBA—Sound Levels (decibels)
db—Dry Bulb
SEER—Seasonal Energy Efficiency Ratio
wb—Wet Bulb
COP—Coefficient of Performance
HSPF—Heating Season Performance Factor
3
8.0
8.0
8.0
8.0
8.0
8.0
50XT
PHYSICAL DATA
UNIT SIZE
NOMINAL CAPACITY (ton)
OPERATING WEIGHT (lb)
(kg)
COMPRESSOR
REFRIGERANT: PURON (R---410A) Quantity (lb)
(kg)
EXPANSION DEVICE ---HEATING
ORIFICE OD (in.) --- Left
ORIFICE OD (in.) --- Right
EXPANSION DEVICE ---COOLING
Size
Part Number
OUTDOOR COIL
Rows…Fins/in.
Face Area (sq. ft.)
OUTDOOR FAN
Nominal Cfm
Diameter (in.)
(mm)
Motor HP (RPM)
INDOOR COIL
Rows…Fins/in.
Face Area (sq. ft.)
INDOOR FAN
Nominal Airflow (Cfm)
Comfort
Efficiency
Max
Size (in.)
(mm)
Motor HP (RPM)
HIGH ---PRESSURE SWITCH (psig)
Cutout
Reset (Auto)
HIGH ---PRESSURE SWITCH 2 (psig)
(Compressor Solenoid)
Cutout
Reset (Auto)
LOSS ---OF ---CHARGE/LOW---PRESSURE SWITCH
(Liquid Line) (psig)
Cutout
Reset (Auto)
RETURN ---AIR FILTERS Throwaway (in.)*
(mm)
024
2
405
184
030
2 ---1/2
435
197
036
042
3
3 ---1/2
464
476
210
216
Two ---Stage Scroll
9.7
14.0
4.4
6.4
AccuRater
0.035
0.040
0.035
0.042
TXV
3 Ton
4 Ton
EA36YD139
EA36YD149
048
4
492
223
060
5
535
243
10.3
4.7
11.5
5.2
15.5
7.0
16.0
7.3
0.042
0.038
0.038
0.038
0.046
0.046
0.046
2 Ton
EA36YD129
3 Ton
EA36YD139
4 Ton
EA36YD149
5 Ton
EA36YD159
2…21
13.6
2…21
15.3
2…21
17.5
2…21
19.4
2…21
19.4
2…21
23.3
2700
22
559
1/8 (825)
2700
22
559
1/8 (825)
2800
22
559
1/8 (825)
2800
22
559
1/8 (825)
3300
22
559
1/4 (1100)
3300
22
559
1/3 (1110)
3…17
3.7
3…17
3.7
3…17
4.7
3…17
4.7
3…17
5.7
4…17
5.7
Variable based on Comfort Settings (see User Interface instructions for more information).
700
875
1050
1225
1400
1750
800
1000
1200
1400
1600
2000
10x10
10x10
11x10
11x10
11x10
11x10
254x254
254x254
279x254
279x254
279x254
279x254
1/2
1/2
3/4
3/4
3/4
1
670 ± 10
470 ± 25
565 ± 15
455 ± 15
23 ± 5
55 ± 5
20x24x1
24x30x1
24x36x1
508x610x25
610x762x25
610x914x25
*Recommended filter sizes for field---installed air filter grilles mounted on the wall or ceiling of the conditioned structure. Required filter sizes shown are based
on the larger of the ARI (Air Conditioning and Refrigeration Institute) rated cooling airflow or the heating airflow velocity of 300 ft/minute for throwaway type or
450 ft/minute for high ---capacity type. Air filter pressure drop for non ---standard filters must not exceed 0.08 IN. WC.
ISO 9001:2000
REGISTERED
A--WEIGHTED SOUND POWER LEVEL (dBA)
MODEL 50XT
024
030
036
042
048
060
STANDARD
RATING
(dBA)
75
75
75
75
78
78
TYPICAL OCTAVE BAND SPECTRUM (dBA) (without tone adjustment)
125
250
500
1000
2000
4000
8000
58.8
58.8
60.7
56.7
62.4
63.5
63.5
63.5
63.3
62.8
69.9
67.6
67.2
67.2
66.8
67.8
71.3
71.8
66.9
66.9
66.5
67.4
73.4
75.5
63.7
63.7
64.2
63.7
70.0
71.0
58.3
58.3
60.3
57.7
66.3
68.1
50.0
50.0
53.0
50.8
60.1
59.9
NOTE: Tested in accordance with ARI Standard 270 ---95 (not listed in ARI).
4
Factory--installed options
Coil options include tin--plated* indoor hairpins, copper/copper
and vinyl--coated construction for refrigerant coils. Units are
shipped standard with copper tube/aluminum fin construction. See
model number nomenclature for coil options.
*Tin--plated indoor coils are built with special hairpins that are
designed to resist both general pitting corrosion and excessive
indoor corrosion (Formicary Corrosion).
Field--installed accessories
Manual Air Damper (25% open)
Electric Heaters
Filter Rack
Flat Roof Curbs (8--in. and 14--in.) (203 mm and 256 mm)
Square--to--Round Duct Transition Kit
Infinityt User Interface
Crankcase Heater
Lifting Kit
Compressor Hard Start Kit
Manual outside air damper includes hood and filter rack with
adjustable damper blade for up to 25% outdoor air.
Electric heaters provide additional heat in the unit when required.
Each package has a heater module that slides into the controls
compartment. Heater sizes range from 5.0 to 20.0 kW. The electric
heater design allows the use of a single--point power supply for the
entire unit, resulting in lower installed costs.
Flat roof curbs in both 8 in. (203 mm) and 14 in. (256 mm) sizes
are available for roof mounted applications.
Square--to--round duct transition kit enables 024--048 size units
to be fitted to 14 in. round ductwork.
Infinity User Interface coupled with the system’s variable--speed
indoor blower delivers Carrier’s patented IdealHumidity
technology that allows for even greater humidity control. Along
with more precisely controlling temperature and humidity, the
Infinity User Interface offers full seven--day programmability
allowing you to further customize your comfort and energy
savings.
Lifting kit includes 4 metal brackets that are available to assist in
lifting this product onto a roof application.
Crankcase heater
provides anti--floodback protection for
low--load cooling applications.
Filter rack
features easy installation, serviceability, and
high--filtering performance for vertical or horizontal applications.
Compressor hard start kit assists compressor start--up by
providing additional starting torque on single phase units and
prolongs compressor motor life.
Electric Heaters
CATALOG
ORDERING NO.
NOMINAL
CAPACITY
(kW)
USED WITH SIZES
FUSED
STAGES
24
30
36
42
48
60
X
X
X
208/240 — SINGLE PHASE (60 Hz)
CPHEATER080A00
3.8 / 5.0
NO
1
CPHEATER081A00
3.8 / 5.0
YES
1
X
X
CPHEATER083A00
5.4 / 7.2
YES
1
X
X
X
X
X
X
CPHEATER085A00
7.5 / 10.0
YES
1
X
X
X
X
X
X
CPHEATER087A00
11.3 / 15.0
YES
2
X
X
X
X
X
CPHEATER089A00
15.0 / 20.0
YES
2
X
X
X
NOTE
Electric heaters are rated at 240v. Refer to Multiplication Factors table for other voltages.
X=Approved combination
5
X
50XT
OPTIONS AND ACCESSORIES
FILTER RACK
MANUAL OUTSIDE AIR DAMPER
BEND FLANGE AT 90°-SCREW TO
DIVIDER WITH 1-IN. SCREW
REPLACEMENT
PANEL
MANUAL OUTSIDE
AIR HOOD
TOP FILTER RACK
EVAPORATOR
COIL
50XT
DAMPER
BLADE
BOTTOM FILTER
RACK
6
7
Fig. 2 -- 50XT024--030 Unit Dimensions
50XT
A06594
8
Fig. 3 -- 50XT036--060 Unit Dimensions
50XT
A06595
ACCESSORY DIMENSIONS
HVAC unit
base
HVAC unit
base
Screw
(NO TE A)
Gask eting
inner flange*
Screw
(NOTE A)
Gasketing
inner flange*
*Gasketing
outer flange
*Gasketing
outer flange
Wood nailer*
Flashing field
supplied
Wood nailer*
Flashing field
supplied
Roof curb*
Insulation (field
supplied)
Roofing material
field supplied
Insulation (field
supplied)
Roofing material
field supplied
Ductwork
field supplied
Cant strip
field supplied
Roof curb*
Ductwork
field supplied
Cant strip
field supplied
Roof
Roof
*Provided with roof curb
*Provided with roof curb
Roof Curb for Small Cabinet
Roof Curb for Large Cabinet
Note A: When unit mounting scre w is used,
retainer bracket must also be used.
Note A: When unit mounting scre w is used,
retainer bracket must also be used.
E
G
Supply opening
(B x C)
G
B Typ.
F
F
D
CTyp.
R/A
S/A
A
E
Insulated
deck pan
Short
Support
Insulated
deck pan
Gasket around
duct
D
Gasket around
outer edge
Long
Support
Return opening
(B X C)
A05308
UNIT SIZE
024-- 030
036-- 060
CATALOG
NUMBER
CPRFCURB006A00
CPRFCURB007A00
CPRFCURB008A00
CPRFCURB009A00
A
IN. (MM)
8 (203)
14 (356)
8 (203)
14 (356)
B
IN. (MM)
11 (279)
11 (279)
16--3/16 (411)
16--3/16 (411)
C
IN. (MM)
16--1/2 (419)
16--1/2 (419)
17--3/8 (441)
17--3/8 (441)
D
IN. (MM)
28--3/4 (730)
28--3/4 (730)
40--1/4 (1022)
40--1/4 (1022)
E
IN. (MM)
30--3/8 (771)
30--3/8 (771)
41--15/16 (1065)
41--15/16 (1065)
F
IN. (MM)
44--5/16 (1126)
44--5/16 (1126)
44--7/16 (1129)
44--7/16 (1129)
G
IN. (MM)
45--15/16 (1167)
45--15/16 (1167)
46--1/16 (1169)
46--1/16 (1169)
NOTES:
1. Roof curb must be set up for unit being installed.
2. Seal strip must be applied, as required, to unit being installed.
3. Roof curb is made of 16--gauge steel.
4. Attach ductwork to curb (flanges of duct rest on curb).
5. Insulated panels: 1--in. (25 mm) thick fiberglass 1 lb. density.
6. When unit mounting screw is used (see Note A), a retainer bracket must be used as well. This bracket must also be used when required by code for hurricane or seismic
conditions. This bracket is available through Micrometl.
9
50XT SUGGESTED RIGGING
-in. (914 mm)
DETAIL A
A06296
A06298
CABINET
MODEL
Small
50XT--024
50XT--030
RIGGING WT
lb
kg
418
190
448
203
50XT--036
469
213
50XT--042
491
223
50XT--048
497
225
50XT--060
548
249
NOTE: See dimensional drawing for corner weight distribution. Corner
weights shown on drawing are based on unit---only weights and do
not include packaging.
Large
SELECTION PROCEDURE
Determine cooling and heating requirements at design
conditions
Given:
REQUIRED COOLING CAPACITY (TC) . . . . . . 34,500 BTUH
SENSIBLE HEAT CAPACITY (SHC) . . . . . . . . . 24,000 BTUH
REQUIRED HEATING CAPACITY (SHC) . . . . . 36,000 BTUH
CONDENSER ENTERING AIR TEMPERATURE 95°F (35°C)
INDOOR--AIR TEMPERATURE . . . 80°F (26.6°C) EDB, 67°F
(19.4°C) EWB
EVAPORATOR AIR QUANTITY . . . . . . . . . . . . . . . 1200 CFM
ELECTRICAL CHARACTERISTICS . . . . . . . . . . . . . 230--1--60
Select unit based on required cooling capacity
Enter the Electric Heater table on page 5 for 208/230v,
single--phase, unit. The 7.2--kW heater at 240v most closely
satisfies the heating required. To calculate kW at 230v, multiply the
heater kW by multiplication factor 0.92 found in the Multiplication
Factors table on page 29.
7.2 kW x 0.92 = 6.6 kW
6.6 kW x 3414 Btuh/kW = 22,532 Btuh
Total unit heating capacity is 39,342 Btuh
(16,810 + 22,532).
Select unit that corresponds to power source available
The Electrical Data table shows that the unit is designed to operate
at 208/230--1--60.
Enter Net Cooling Capacities table at condenser entering
temperature of 95°F (35°C). The 036 unit at 1200 cfm and 67°F
(19.4°C) ewb (entering wet bulb) will provide a total capacity of
34,600 Btuh and a SHC of 24,220 Btuh. Calculate SHC correction,
if required, using Note 4 under Cooling Capacities tables.
Select electric heat
Enter the 036 unit Heating Extended Performance table at 1200
cfm. At 70°F (21.1°C) return indoor air and 20°F (--6.6°C) air
entering outdoor coil, the integrated heating capacity is 16,810
Btuh. (Select integrated heating capacity value since deductions for
outdoor--coil frost and defrosting have already been made. No
correction is required.)
The required heating capacity is 36,000 Btuh. Therefore, at least
19,190 Btuh additional electric heat is required.
Determine additional electric heat capacity in kW.
19,190 Btuh
3414 Btuh/kW
= 5.6kW of heat required
10
11
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
18.69
15.18
15.72
12.75
22.76
20.16
16.20
16.81
13.43
22.40
22.85
24.66
27.16
22.76
22.97
23.39
25.22
27.77
1.70
1.67
1.64
1.64
1.64
1.67
1.64
1.62
1.61
1.61
1.11
11.75
12.26
10.05
17.52
15.66
12.58
13.14
10.61
17.61
19.23
21.48
17.52
17.71
18.10
19.75
22.06
1.09
14.47
17.20
1.08
1.08
1.08
1.09
1.08
1.06
1.06
16.65
16.65
1.05
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
21.77
21.77
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
See page 29 for cooling notes.
600
525
CFM
EVAPORATOR
AIR
50XT024 Low Cool
800
700
CFM
EVAPORATOR
AIR
50XT024 High Cool
12.96
16.32
15.71
21.76
21.81
12.28
15.24
14.70
18.21
20.88
1.88
1.85
1.83
1.82
1.82
1.86
1.83
1.80
1.80
1.79
20.93
18.71
17.12
16.78
16.77
20.41
18.23
16.69
16.29
15.95
10.21
12.74
12.18
16.75
16.77
9.66
11.87
11.36
14.07
15.95
1.26
1.24
1.23
1.23
1.23
1.24
1.22
1.21
1.21
1.20
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
26.37
23.94
22.19
21.84
21.81
25.83
23.44
21.71
21.29
20.88
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
12.48
15.82
15.21
20.81
20.81
11.80
14.75
14.21
17.70
19.95
2.09
2.05
2.03
2.03
2.03
2.06
2.03
2.01
2.00
2.00
23.35
21.18
19.62
19.74
19.74
22.94
20.79
19.25
18.95
18.94
11.95
15.30
14.69
19.74
19.74
11.29
14.24
13.70
18.95
18.94
2.31
2.28
2.26
2.26
2.26
2.29
2.26
2.23
2.23
2.23
19.72
17.60
16.09
15.96
15.96
19.26
17.18
15.70
15.34
15.21
9.80
12.32
11.76
15.96
15.96
9.26
11.47
10.96
13.65
15.21
1.43
1.41
1.39
1.39
1.39
1.41
1.39
1.38
1.37
1.37
18.41
16.41
14.98
15.10
15.10
18.02
16.05
14.64
14.40
14.40
9.36
11.88
11.32
15.10
15.10
8.84
11.03
10.53
14.40
14.40
1.62
1.60
1.59
1.59
1.59
1.60
1.58
1.57
1.57
1.57
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
24.90
22.60
20.94
20.81
20.81
24.42
22.15
20.52
20.13
19.95
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
Cooling Extended Performance Table
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
11.41
14.74
14.14
18.58
18.58
10.76
13.70
13.16
17.86
17.86
2.57
2.53
2.51
2.51
2.51
2.54
2.51
2.48
2.48
2.48
50XT
17.03
15.14
13.80
14.15
14.15
16.69
14.83
13.50
13.52
13.52
8.91
11.41
10.85
14.15
14.15
8.39
10.58
10.07
13.52
13.52
1.85
1.83
1.81
1.82
1.82
1.83
1.81
1.80
1.80
1.80
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
21.66
19.67
18.22
18.58
18.58
21.33
19.34
17.90
17.86
17.86
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
11.05
14.14
13.54
17.29
17.29
10.18
13.12
12.58
16.66
16.66
2.57
2.82
2.79
2.80
2.80
2.83
2.79
2.77
2.77
2.77
15.51
13.76
12.51
13.12
13.11
15.24
13.50
12.27
12.55
12.55
8.41
10.91
10.35
13.12
13.11
7.90
10.09
9.58
12.55
12.55
2.11
2.09
2.08
2.09
2.09
2.09
2.07
2.06
2.07
2.07
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
20.60
18.01
16.69
17.29
17.29
19.57
17.74
16.42
16.66
16.66
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
12
700
800
700
800
700
800
CFM
4.21
4.24
3.97
4.02
3.77
3.82
700
800
700
800
700
800
CFM
16.65
16.84
16.03
16.25
14.91
15.10
14.60
14.76
14.05
14.24
13.06
13.23
1.58
1.53
1.62
1.68
1.89
1.84
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
1.12
1.11
1.25
1.24
1.38
1.38
5.89
5.95
5.63
5.71
5.36
5.43
1.21
1.20
1.35
1.34
1.49
1.48
9.38
9.46
9.01
9.12
8.62
8.74
8.61
8.69
8.27
8.37
7.91
8.02
1.32
1.31
1.46
1.45
1.61
1.59
11.90
11.94
11.51
11.60
11.03
11.17
10.85
10.89
10.49
10.58
10.06
10.19
19.30
19.36
18.69
18.95
17.97
18.27
19.30
19.36
18.69
18.95
17.97
18.27
1.69
1.61
1.86
1.79
2.03
1.96
21.15
21.27
20.68
20.80
20.04
20.30
21.15
21.27
20.68
20.80
20.04
20.30
1.75
1.66
1.95
1.85
2.14
2.05
22.00
22.16
21.51
21.65
20.96
21.13
22.00
22.16
21.51
21.65
20.96
21.13
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
6.40
6.47
6.12
6.20
5.83
5.91
1.78
1.70
1.98
1.87
2.20
2.08
Total
System
KW
1.42
1.43
1.55
1.55
1.70
1.69
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap.— Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
3.88
3.90
3.65
3.70
3.47
3.51
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT024 High Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT024 High
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
50XT
12.90
12.94
11.21
11.30
10.75
10.88
1.45
1.44
1.49
1.66
1.75
1.72
25.14
25.40
24.54
24.82
23.91
24.20
25.14
25.40
24.54
24.82
23.91
24.20
1.92
1.82
2.11
2.00
2.32
2.21
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
14.22
14.27
12.36
12.46
11.85
12.00
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
13
525
600
525
600
525
600
CFM
2.95
2.99
2.81
2.87
2.61
2.66
525
600
525
600
525
600
CFM
12.17
12.37
11.60
11.80
11.00
11.21
10.66
10.84
10.17
10.34
9.64
9.83
1.30
1.27
1.46
1.43
1.64
1.61
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
1.05
1.04
1.22
1.21
1.37
1.36
4.50
4.58
4.34
4.41
4.09
4.16
1.11
1.09
1.29
1.28
1.46
1.44
7.22
7.31
6.73
6.87
6.26
6.38
6.63
6.71
6.18
6.30
5.75
5.86
1.18
1.17
1.35
1.34
1.52
1.51
8.74
8.89
8.26
8.40
7.78
7.92
7.97
8.11
7.53
7.66
7.10
7.22
15.20
15.22
14.55
14.80
13.91
14.16
15.20
15.22
14.55
14.80
13.91
14.16
1.37
1.33
1.54
1.50
1.72
1.68
17.28
16.79
16.84
16.80
16.15
16.40
17.28
16.79
16.84
16.80
16.15
16.40
1.41
1.37
1.61
1.54
1.79
1.74
18.16
16.85
17.86
17.64
17.17
17.36
18.16
16.85
17.86
17.64
17.17
17.36
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
4.89
4.97
4.72
4.80
4.45
4.53
50XT
1.44
1.36
1.64
1.57
1.83
1.77
Total
System
KW
1.22
1.20
1.38
1.37
1.56
1.54
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap.— Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
2.72
2.75
2.59
2.64
2.41
2.46
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT024 Low Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT024 Low
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
8.60
8.74
8.14
8.28
7.68
7.80
1.24
1.22
1.40
1.38
1.57
1.56
19.43
16.78
20.96
18.39
20.53
20.33
19.43
16.78
20.96
18.39
20.53
20.33
1.44
1.29
1.71
1.53
1.91
1.85
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
9.48
9.64
8.97
9.13
8.46
8.60
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
14
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
23.85
19.34
19.99
16.13
29.10
25.68
20.61
21.34
16.96
28.72
29.28
31.48
34.49
29.10
29.40
29.91
32.13
35.18
2.18
2.14
2.10
2.10
2.09
2.14
2.10
2.07
2.06
2.05
1.36
14.40
14.96
12.26
21.32
19.04
15.36
15.98
12.91
21.55
23.40
25.95
21.32
21.67
22.13
24.00
26.61
1.34
17.65
21.08
1.32
1.31
1.31
1.35
1.32
1.30
1.30
20.32
20.32
1.29
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
27.90
27.90
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
See page 29 for cooling notes.
700
615
CFM
EVAPORATOR
AIR
50XT030 Low Cool
1000
875
CFM
EVAPORATOR
AIR
50XT030 High Cool
16.32
20.69
19.98
27.75
27.84
15.50
19.36
18.72
23.21
26.73
2.40
2.36
2.32
2.32
2.32
2.36
2.32
2.29
2.28
2.27
25.22
22.76
20.98
20.56
20.44
24.65
22.22
20.47
20.01
19.50
12.42
15.50
14.89
18.54
20.44
11.79
14.49
13.94
17.18
19.50
1.55
1.53
1.51
1.50
1.50
1.53
1.51
1.49
1.49
1.48
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
33.29
30.42
28.33
27.90
27.84
32.69
29.85
27.78
27.25
26.73
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
15.65
20.02
19.31
26.48
26.48
14.85
18.70
18.07
22.53
25.47
2.65
2.60
2.57
2.56
2.56
2.61
2.56
2.53
2.52
2.52
29.11
26.64
24.86
25.00
25.00
28.70
26.23
24.46
24.09
24.09
14.94
19.30
18.60
25.00
25.00
14.15
18.00
17.38
24.09
24.09
2.92
2.87
2.83
2.84
2.84
2.88
2.83
2.80
2.79
2.79
23.71
21.40
19.74
19.46
19.46
23.20
20.93
19.28
18.86
18.60
11.90
14.98
14.38
19.46
19.46
11.28
13.99
13.44
16.67
18.60
1.76
1.74
1.72
1.72
1.72
1.75
1.72
1.70
1.70
1.70
22.06
19.91
18.38
18.38
18.38
21.63
19.51
17.99
17.62
17.60
11.34
14.42
13.83
18.38
18.38
10.73
13.44
12.90
17.58
17.60
2.01
1.99
1.97
1.97
1.97
2.00
1.97
1.95
1.95
1.95
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
31.27
28.60
26.66
26.48
26.48
30.77
28.11
26.18
25.70
25.47
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
Cooling Extended Performance Table
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
14.18
18.53
17.84
23.34
23.34
13.40
17.25
16.64
22.56
22.56
3.22
3.17
3.13
3.15
3.15
3.18
3.13
3.10
3.10
3.10
20.25
18.29
16.90
17.17
17.17
19.91
17.97
16.58
16.49
16.20
10.74
13.82
13.24
17.17
17.17
10.14
12.85
12.33
16.49
16.20
2.30
2.28
2.26
2.26
2.26
2.28
2.26
2.24
2.24
2.21
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
26.76
24.51
22.90
23.34
23.34
26.43
24.19
22.58
22.56
22.56
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
50XT
13.36
16.98
17.00
21.47
21.47
13.36
16.42
15.82
20.81
20.81
3.55
3.51
3.47
3.49
3.49
3.19
3.47
3.43
3.44
3.44
18.28
16.52
15.28
15.82
15.82
18.01
16.26
15.02
15.23
15.23
10.09
13.17
12.60
15.82
15.82
9.51
12.24
11.71
15.23
15.23
2.63
2.61
2.60
2.60
2.60
2.62
2.60
2.58
2.58
2.58
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
24.19
22.47
20.75
21.47
21.47
26.31
21.92
20.50
20.81
20.81
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
15
875
1000
875
1000
875
1000
CFM
7.07
7.16
6.74
6.84
6.31
6.42
875
1000
875
1000
875
1000
CFM
19.48
19.75
18.76
19.03
18.00
18.32
17.07
17.31
16.44
16.67
15.77
16.05
1.91
1.89
2.11
2.08
2.31
2.28
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
1.56
1.56
1.73
1.73
1.90
1.90
8.60
8.70
8.28
8.39
7.88
8.00
1.64
1.64
1.82
1.82
2.00
2.00
12.08
12.23
11.66
11.80
11.20
11.35
11.09
11.23
10.70
10.83
10.28
10.42
1.72
1.71
1.91
1.90
2.10
2.09
14.34
14.51
13.82
14.00
13.30
13.48
13.07
13.23
12.60
12.76
12.13
12.29
24.32
24.63
23.39
23.75
22.48
22.83
24.32
24.63
23.39
23.75
22.48
22.83
2.04
2.02
2.23
2.20
2.44
2.40
28.09
28.28
27.23
27.60
26.17
26.59
28.09
28.28
27.23
27.60
26.17
26.59
2.08
2.15
2.34
2.31
2.56
2.51
29.61
30.05
29.07
29.24
27.94
28.38
29.61
30.05
29.07
29.24
27.94
28.38
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
9.35
9.46
9.00
9.12
8.56
8.69
50XT
2.12
2.19
2.40
2.34
2.62
2.57
Total
System
KW
1.78
1.77
1.97
1.95
2.17
2.15
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap.— Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
6.51
6.59
6.20
6.29
5.81
5.91
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT030 High Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT030 High
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
13.99
14.16
13.46
13.64
12.95
13.11
1.81
1.79
2.00
1.98
2.20
2.18
35.99
36.32
35.34
35.85
34.42
34.50
35.99
36.32
35.34
35.85
34.42
34.50
2.18
2.32
2.46
2.54
2.70
2.82
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
15.42
15.61
14.85
15.04
14.28
14.46
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
16
615
700
615
700
615
700
CFM
3.77
3.81
3.34
3.42
2.85
2.91
615
700
615
700
615
700
CFM
13.95
14.14
13.39
13.58
12.86
13.03
12.23
12.39
11.73
11.90
11.27
11.42
1.41
1.37
1.61
1.57
1.82
1.78
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
1.12
1.12
1.29
1.29
1.47
1.47
5.29
5.36
5.00
5.10
4.45
4.54
1.20
1.19
1.38
1.37
1.57
1.56
8.06
8.16
7.66
7.75
7.16
7.27
7.40
7.49
7.03
7.11
6.57
6.67
1.27
1.25
1.46
1.44
1.65
1.63
9.90
10.01
9.47
9.60
8.97
9.10
9.03
9.13
8.64
8.75
8.18
8.30
17.78
18.04
17.11
17.39
16.41
16.66
17.78
18.04
17.11
17.39
16.41
16.66
1.50
1.45
1.70
1.65
1.92
1.86
20.83
21.17
20.08
20.40
19.37
19.66
20.83
21.17
20.08
20.40
19.37
19.66
1.57
1.51
1.78
1.71
2.01
1.93
22.25
22.64
21.45
21.80
20.70
21.02
22.25
22.64
21.45
21.80
20.70
21.02
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
5.75
5.82
5.44
5.55
4.84
4.93
1.61
1.54
1.81
1.74
2.05
1.96
Total
System
KW
1.32
1.29
1.51
1.48
1.71
1.68
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap.— Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
3.47
3.51
3.07
3.15
2.62
2.68
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT030 Low Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT030 Low
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
50XT
9.75
9.86
9.35
9.47
8.89
9.02
1.34
1.31
1.53
1.50
1.73
1.70
27.83
28.00
26.70
27.26
25.66
26.16
27.83
28.00
26.70
27.26
25.66
26.16
1.75
1.62
1.96
1.87
2.20
2.09
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
10.75
10.87
10.31
10.45
9.80
9.94
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
17
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
28.72
23.25
24.04
18.41
35.06
30.91
24.79
25.68
19.31
34.47
35.12
37.76
42.16
35.06
35.29
35.86
38.52
42.99
2.41
2.36
2.33
2.33
2.32
2.37
2.32
2.29
2.29
2.28
1.53
16.28
16.96
13.86
24.45
21.68
17.42
18.17
14.64
24.46
26.63
29.67
24.45
24.61
25.11
27.33
30.44
1.50
20.06
23.91
1.49
1.48
1.48
1.51
1.48
1.47
1.46
23.27
23.27
1.46
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
33.64
33.64
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
See page 29 for cooling notes.
850
745
CFM
EVAPORATOR
AIR
50XT036 Low Cool
1200
1050
CFM
EVAPORATOR
AIR
50XT036 High Cool
18.61
24.97
24.08
33.64
33.64
17.73
23.34
22.56
28.00
32.32
2.66
2.61
2.58
2.58
2.58
2.62
2.57
2.54
2.54
2.53
28.89
25.92
23.80
23.43
23.43
28.20
25.29
23.21
22.70
22.34
14.12
17.64
16.89
23.43
23.43
13.35
16.45
15.77
19.54
22.34
1.71
1.69
1.68
1.67
1.67
1.70
1.67
1.66
1.65
1.65
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
40.85
36.62
34.09
33.64
33.64
40.12
35.94
33.44
32.83
32.32
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
17.87
24.22
23.34
32.12
32.12
17.01
22.61
21.83
27.24
30.90
2.93
2.88
2.85
2.85
2.85
2.90
2.84
2.81
2.81
2.81
36.13
32.43
30.23
30.46
30.46
35.58
31.91
29.73
29.36
29.36
17.09
23.43
22.56
30.46
30.46
16.24
21.83
21.07
29.36
29.36
3.24
3.19
3.15
3.16
3.16
3.20
3.15
3.12
3.11
3.11
27.21
24.40
22.39
22.33
22.33
26.61
23.85
21.87
21.41
21.31
13.55
17.08
16.34
22.33
22.33
12.81
15.90
15.23
18.97
21.31
1.93
1.91
1.89
1.89
1.89
1.91
1.89
1.87
1.87
1.87
25.40
22.76
20.88
21.12
21.11
24.89
22.28
20.42
20.19
20.19
12.96
16.48
15.74
21.12
21.11
12.23
15.32
14.65
20.19
20.19
2.17
2.15
2.14
2.14
2.14
2.16
2.14
2.12
2.12
2.12
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
38.57
34.60
32.22
32.12
32.12
37.93
34.00
31.65
31.11
30.90
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
Cooling Extended Performance Table
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
16.25
22.57
21.71
28.63
28.63
15.43
21.00
20.25
27.65
27.65
3.58
3.53
3.49
3.50
3.50
3.54
3.49
3.45
3.46
3.46
50XT
23.45
20.99
19.24
19.80
19.80
23.01
20.58
18.85
18.95
18.95
12.33
15.84
15.10
19.80
19.80
11.60
14.69
14.03
18.95
18.95
2.46
2.44
2.43
2.44
2.44
2.45
2.43
2.41
2.41
2.41
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
33.48
30.06
28.05
28.63
28.63
33.02
29.65
27.64
27.65
27.65
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
15.35
21.64
20.78
26.56
26.56
14.53
20.10
19.35
25.71
25.71
3.96
3.90
3.87
3.89
3.89
3.92
3.87
3.83
3.84
3.84
21.30
19.06
17.46
18.32
18.32
20.96
18.72
17.14
17.58
17.58
11.65
15.15
14.42
18.32
18.32
10.93
14.02
13.36
17.58
17.58
2.80
2.78
2.77
2.78
2.78
2.79
2.77
2.75
2.76
2.76
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
30.56
27.47
25.66
26.56
26.56
30.21
27.14
25.33
25.71
25.71
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
18
1050
1200
1050
1200
1050
1200
CFM
8.62
8.70
8.34
8.44
7.96
8.07
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
1050
1200
1050
1200
1050
1200
CFM
INDOOR AIR
1.43
1.43
1.59
1.59
1.74
1.74
23.95
24.20
23.16
23.44
22.38
22.66
20.99
21.21
20.29
20.54
19.61
19.86
2.22
2.20
2.44
2.41
2.67
2.64
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
7.93
8.01
7.68
7.77
7.32
7.43
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT036 High Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT036 High
10.43
10.53
10.14
10.25
9.76
9.88
1.60
1.59
1.77
1.77
1.95
1.94
14.73
14.88
14.26
14.42
13.78
13.93
13.52
13.66
13.09
13.24
12.65
12.79
1.78
1.77
1.97
1.96
2.17
2.15
17.57
17.76
16.99
17.20
16.38
16.59
16.02
16.19
15.49
15.68
14.93
15.12
29.99
30.20
28.99
29.28
28.03
28.36
29.99
30.20
28.99
29.28
28.03
28.36
2.51
2.45
2.73
2.71
2.99
2.94
34.51
34.82
33.82
33.60
32.65
33.00
34.51
34.82
33.82
33.60
32.65
33.00
2.69
2.67
2.98
2.90
3.24
3.21
36.57
36.95
35.98
35.59
34.87
34.97
36.57
36.95
35.98
35.59
34.87
34.97
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
11.33
11.45
11.02
11.14
10.60
10.74
2.79
2.74
3.08
3.00
3.37
3.29
Total
System
KW
1.92
1.90
2.12
2.10
2.33
2.31
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
50XT
17.15
17.33
16.61
16.81
15.99
16.19
1.99
1.97
2.19
2.17
2.40
2.38
43.09
43.39
42.90
43.10
42.66
42.80
43.09
43.39
42.90
43.10
42.66
42.80
3.12
2.88
3.44
3.30
3.75
3.69
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
18.91
19.11
18.32
18.53
17.63
17.86
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
19
745
850
745
850
745
850
CFM
3.84
3.91
3.10
3.23
2.22
2.34
745
850
745
850
745
850
CFM
16.25
16.46
15.55
15.78
14.74
14.98
14.24
14.42
13.62
13.82
12.91
13.13
1.78
1.74
1.99
1.95
2.22
2.18
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
1.62
1.62
1.82
1.82
2.03
2.04
6.10
6.17
5.41
5.53
4.60
4.71
1.68
1.67
1.89
1.89
2.10
2.11
9.48
9.61
8.83
8.98
8.01
8.17
8.70
8.82
8.10
8.24
7.35
7.49
1.72
1.70
1.93
1.92
2.15
2.14
11.69
11.84
11.03
11.20
10.24
10.42
10.66
10.80
10.06
10.21
9.33
9.50
20.33
20.70
19.45
19.78
18.60
18.90
20.33
20.70
19.45
19.78
18.60
18.90
1.81
1.76
2.02
1.97
2.26
2.20
23.56
23.96
22.61
23.00
21.56
21.95
23.56
23.96
22.61
23.00
21.56
21.95
1.84
1.78
2.05
1.98
2.28
2.21
25.01
25.46
24.02
24.44
22.94
23.44
25.01
25.46
24.02
24.44
22.94
23.44
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
6.63
6.71
5.88
6.01
5.00
5.12
50XT
1.85
1.78
2.06
1.99
2.29
2.22
Total
System
KW
1.74
1.71
1.95
1.93
2.18
2.16
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap.— Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
3.53
3.60
2.86
2.98
2.05
2.16
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT036 Low Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT036 Low
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
11.51
11.66
10.90
11.07
10.18
10.36
1.75
1.72
1.96
1.94
2.19
2.16
30.27
30.88
29.09
29.68
27.95
28.50
30.27
30.88
29.09
29.68
27.95
28.50
1.90
1.82
2.11
2.02
2.35
2.25
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
12.69
12.85
12.02
12.20
11.23
11.42
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
20
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
37.05
29.94
30.93
24.77
41.96
39.80
31.90
33.01
26.04
41.24
42.00
45.04
49.21
41.96
42.17
42.81
45.87
50.09
2.96
2.89
2.84
2.83
2.82
2.91
2.84
2.78
2.77
2.76
1.91
19.56
20.31
16.51
29.53
25.99
20.89
21.71
17.40
29.61
32.05
35.41
29.53
29.77
30.34
32.81
36.21
1.91
24.09
28.99
1.90
1.90
1.90
1.89
1.89
1.89
1.89
28.20
28.20
1.89
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
40.34
40.34
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
See page 29 for cooling notes.
975
855
CFM
EVAPORATOR
AIR
50XT042 Low Cool
1400
1225
CFM
EVAPORATOR
AIR
50XT042 High Cool
25.02
31.98
30.89
40.04
40.04
23.77
29.93
28.96
36.02
38.56
3.23
3.15
3.10
3.10
3.10
3.17
3.10
3.05
3.04
3.03
34.17
31.00
28.69
28.23
28.23
33.47
30.33
28.04
27.46
27.00
16.72
21.04
20.23
28.23
28.23
15.84
19.65
18.92
23.43
27.00
2.12
2.12
2.12
2.12
2.12
2.10
2.11
2.11
2.11
2.11
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
47.23
43.30
40.45
40.04
40.04
46.48
42.59
39.74
39.06
38.56
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
23.92
30.88
29.81
37.92
37.92
22.69
28.85
27.90
36.39
36.60
3.51
3.44
3.39
3.39
3.39
3.46
3.39
3.34
3.33
3.32
45.09
38.65
36.05
36.46
36.46
44.33
38.03
35.56
35.21
35.21
24.26
30.16
29.03
36.46
36.46
22.99
28.11
27.16
35.21
35.21
3.58
3.69
3.63
3.64
3.64
3.52
3.63
3.58
3.57
3.58
31.95
29.00
26.88
26.78
26.78
31.36
28.43
26.32
26.46
25.67
16.00
20.30
19.52
26.78
26.78
15.12
18.94
18.23
22.99
25.67
2.35
2.36
2.37
2.36
2.36
2.34
2.35
2.35
2.31
2.35
31.03
28.00
24.87
25.14
25.14
31.76
26.33
24.41
24.16
24.16
15.68
19.93
18.73
25.14
25.14
15.26
18.16
17.47
24.16
24.16
2.58
2.59
2.64
2.64
2.64
2.28
2.62
2.63
2.63
2.63
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
44.13
40.50
37.88
37.92
37.92
43.50
39.90
37.29
36.71
36.60
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
Cooling Extended Performance Table
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
23.12
28.88
27.35
33.86
33.86
21.88
26.85
25.89
32.79
32.79
3.93
4.03
4.03
4.00
4.00
3.87
3.98
3.92
3.93
3.93
30.23
24.36
22.66
23.27
23.27
26.40
23.99
22.29
22.43
22.43
15.42
18.62
17.88
23.27
23.27
13.49
17.30
16.64
22.43
22.43
2.60
2.93
2.96
2.95
2.95
2.90
2.92
2.95
2.94
2.94
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
41.83
35.36
31.99
33.86
33.86
41.24
34.81
32.52
32.79
32.79
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
50XT
20.13
26.96
25.92
29.82
29.82
18.96
25.04
24.13
29.04
29.04
4.51
4.45
4.40
4.43
4.43
4.47
4.40
4.35
4.37
4.37
24.42
21.97
20.20
21.29
21.29
24.07
21.52
19.93
20.48
20.50
13.57
17.76
16.93
21.29
21.29
12.74
16.42
15.73
20.48
20.50
3.26
3.29
3.31
3.29
3.29
3.25
3.28
3.30
3.29
3.29
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
32.98
30.38
28.59
29.82
29.82
32.75
30.12
28.29
29.04
29.04
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
21
1225
1400
1225
1400
1225
1400
CFM
10.65
10.79
10.16
10.32
9.53
9.69
1225
1400
1225
1400
1225
1400
CFM
28.26
28.60
27.38
27.71
26.37
26.72
24.77
25.06
23.99
24.28
23.10
23.41
2.62
2.60
2.87
2.85
3.13
3.11
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
2.06
2.08
2.28
2.29
2.49
2.51
12.87
13.02
12.42
12.57
11.86
12.03
2.19
2.20
2.42
2.42
2.64
2.65
17.85
18.04
17.32
17.52
16.69
16.90
16.39
16.56
15.89
16.08
15.32
15.51
2.32
2.32
2.55
2.55
2.80
2.80
21.02
21.26
20.37
20.60
19.70
19.94
19.17
19.39
18.58
18.78
17.96
18.18
35.01
35.38
33.83
34.27
32.67
33.12
35.01
35.38
33.83
34.27
32.67
33.12
2.81
2.79
3.06
3.03
3.34
3.30
40.36
40.37
39.05
39.50
37.72
38.23
40.36
40.37
39.05
39.50
37.72
38.23
2.97
2.91
3.22
3.20
3.50
3.46
42.96
43.00
41.60
41.96
40.19
40.71
42.96
43.00
41.60
41.96
40.19
40.71
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
13.99
14.15
13.49
13.66
12.89
13.07
50XT
3.05
2.96
3.31
3.27
3.59
3.55
Total
System
KW
2.41
2.41
2.66
2.65
2.91
2.90
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap.— Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
9.80
9.92
9.34
9.49
8.77
8.92
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT042 High Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT042 High
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
20.43
20.67
19.77
20.01
19.14
19.37
2.46
2.45
2.70
2.69
2.96
2.94
51.37
51.50
50.54
50.80
49.42
49.70
51.37
51.50
50.54
50.80
49.42
49.70
3.25
3.19
3.54
3.48
3.92
3.78
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
22.53
22.79
21.80
22.06
21.10
21.36
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
22
855
975
855
975
855
975
CFM
5.94
6.03
5.11
5.22
4.12
4.22
855
975
855
975
855
975
CFM
19.99
20.23
19.18
19.44
18.27
18.54
17.51
17.72
16.81
17.03
16.01
16.24
1.99
1.95
2.21
2.17
2.46
2.41
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
1.70
1.69
1.90
1.90
2.11
2.11
8.24
8.36
7.48
7.61
6.57
6.69
1.77
1.76
1.97
1.97
2.18
2.18
12.26
12.41
11.48
11.65
10.55
10.72
11.25
11.39
10.54
10.69
9.68
9.84
1.84
1.82
2.05
2.03
2.27
2.26
14.78
14.95
14.01
14.20
13.09
13.29
13.47
13.63
12.77
12.95
11.94
12.12
24.57
24.89
23.66
23.98
22.72
23.04
24.57
24.89
23.66
23.98
22.72
23.04
2.07
2.02
2.31
2.25
2.56
2.50
28.27
28.72
27.19
27.60
26.12
26.53
28.27
28.72
27.19
27.60
26.12
26.53
2.15
2.08
2.38
2.31
2.64
2.57
30.02
30.53
28.83
29.31
27.72
28.17
30.02
30.53
28.83
29.31
27.72
28.17
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
8.96
9.08
8.13
8.27
7.14
7.27
2.18
2.11
2.42
2.34
2.68
2.60
Total
System
KW
1.89
1.86
2.11
2.08
2.33
2.31
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap. — Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
5.46
5.55
4.70
4.80
3.79
3.88
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT042 Low Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT042 Low
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
50XT
14.43
14.60
13.73
13.92
12.91
13.11
1.91
1.88
2.13
2.10
2.36
2.33
36.61
37.32
35.19
35.86
33.63
34.44
36.61
37.32
35.19
35.86
33.63
34.44
2.32
2.23
2.56
2.47
2.83
2.73
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
15.91
16.10
15.14
15.35
14.24
14.46
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
23
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
38.20
30.85
32.01
25.88
46.32
41.09
32.81
34.10
27.17
45.43
46.29
50.04
55.24
46.32
46.57
47.25
51.07
56.36
3.60
3.53
3.49
3.48
3.48
3.53
3.46
3.42
3.41
3.40
2.23
22.28
23.21
19.02
33.04
29.57
23.76
24.78
20.03
33.19
36.14
40.19
33.04
33.42
34.05
37.06
41.21
2.23
27.41
32.49
2.23
2.23
2.24
2.21
2.21
2.21
2.21
31.49
31.49
2.22
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
44.39
44.39
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
See page 29 for cooling notes.
1100
965
CFM
EVAPORATOR
AIR
50XT048 Low Cool
1600
1400
CFM
EVAPORATOR
AIR
50XT048 High Cool
26.25
33.18
31.89
44.43
44.10
24.98
31.11
29.95
37.29
42.70
3.91
3.84
3.80
3.79
3.79
3.84
3.77
3.73
3.72
3.71
39.26
35.29
32.40
31.85
31.76
38.34
34.45
31.62
30.96
30.30
19.35
24.10
23.08
28.86
31.76
18.36
22.54
21.62
26.74
30.30
2.48
2.49
2.50
2.50
2.50
2.46
2.47
2.48
2.48
2.49
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
53.67
48.62
44.97
44.43
44.10
52.68
47.71
44.11
43.33
42.70
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
25.29
32.20
30.92
42.54
42.54
24.04
30.16
29.00
36.31
40.87
4.25
4.18
4.13
4.13
4.13
4.18
4.11
4.06
4.05
4.05
47.69
43.19
39.95
41.40
40.41
46.96
42.50
39.28
38.87
38.88
24.26
31.17
29.90
41.40
40.41
23.04
29.14
28.00
38.87
38.88
4.62
4.55
4.50
4.51
4.51
4.55
4.48
4.43
4.43
4.43
37.19
33.40
30.64
30.39
30.39
36.37
32.65
29.95
29.34
29.02
18.64
23.38
22.37
30.39
30.39
17.67
21.84
20.92
26.03
29.02
2.77
2.78
2.80
2.80
2.80
2.75
2.77
2.78
2.78
2.78
34.96
31.39
28.77
28.90
28.90
34.25
30.72
28.14
27.64
27.63
17.88
22.62
21.61
28.90
28.90
16.93
21.10
20.18
27.57
27.63
3.10
3.12
3.14
3.13
3.13
3.08
3.10
3.12
3.12
3.12
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
50.80
46.00
42.55
42.54
42.54
49.93
45.21
41.79
41.11
40.87
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
Cooling Extended Performance Table
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
23.15
30.06
28.80
38.04
38.04
22.53
28.60
26.91
36.67
36.67
5.03
4.96
4.91
4.92
4.92
4.52
4.43
4.84
4.84
4.84
50XT
32.54
29.20
26.73
27.27
27.27
31.95
28.62
26.19
26.10
26.10
17.07
21.81
20.81
27.27
27.27
16.14
20.30
19.39
26.10
26.10
3.48
3.51
3.53
3.52
3.52
3.46
3.49
3.52
3.51
3.51
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
44.30
40.12
37.11
38.04
38.04
45.43
41.00
36.54
36.67
36.67
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
22.59
29.43
27.59
36.61
36.62
20.75
26.85
25.73
35.30
34.16
5.06
4.97
5.36
4.93
4.93
5.41
5.34
5.29
4.84
5.30
29.89
26.79
24.50
25.45
25.45
29.40
26.31
24.04
24.40
24.40
16.19
20.93
19.92
25.45
25.45
15.29
19.44
18.53
24.40
24.40
3.92
3.95
3.99
3.97
3.97
3.90
3.94
3.97
3.97
3.96
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
42.55
38.36
33.97
36.61
36.62
40.04
36.24
33.51
35.30
34.16
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
24
1400
1600
1400
1600
1400
1600
CFM
13.33
13.53
12.72
12.94
11.86
12.09
1400
1600
1400
1600
1400
1600
CFM
33.39
33.83
32.29
32.73
31.08
31.53
29.26
29.64
28.29
28.68
27.23
27.62
3.16
3.15
3.43
3.41
3.71
3.69
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
2.19
2.21
2.39
2.41
2.58
2.61
15.98
16.18
15.40
15.62
14.63
14.88
2.40
2.42
2.62
2.64
2.84
2.86
21.89
22.14
21.24
21.52
20.40
20.70
20.10
20.32
19.50
19.75
18.73
19.00
2.63
2.64
2.87
2.88
3.11
3.12
25.47
25.78
24.70
25.00
23.85
24.18
23.23
23.51
22.52
22.79
21.74
22.05
40.69
41.16
39.25
39.82
37.81
38.39
40.69
41.16
39.25
39.82
37.81
38.39
3.49
3.48
3.77
3.74
4.07
4.04
46.59
46.62
44.95
45.50
43.28
43.94
46.59
46.62
44.95
45.50
43.28
43.94
3.77
3.72
4.05
4.04
4.37
4.33
49.36
49.42
47.65
48.12
45.87
46.54
49.36
49.42
47.65
48.12
45.87
46.54
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
17.37
17.59
16.74
16.98
15.90
16.17
3.91
3.83
4.19
4.17
4.51
4.48
Total
System
KW
2.80
2.80
3.05
3.05
3.31
3.31
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap.— Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
12.27
12.45
11.71
11.91
10.91
11.12
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT048 High Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT048 High
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
50XT
24.61
24.92
23.83
24.14
23.04
23.36
2.88
2.88
3.13
3.13
3.40
3.40
58.12
58.16
57.17
57.23
55.65
55.70
58.12
58.16
57.17
57.23
55.65
55.70
4.29
4.22
4.65
4.57
5.07
4.92
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
27.14
27.47
26.27
26.61
25.40
25.75
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
25
965
1100
965
1100
965
1100
CFM
5.86
5.95
5.21
5.32
4.44
4.55
965
1100
965
1100
965
1100
CFM
21.99
22.24
21.27
21.53
20.45
20.73
19.27
19.48
18.64
18.87
17.92
18.16
2.26
2.22
2.53
2.48
2.81
2.76
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
1.86
1.86
2.08
2.08
2.32
2.33
8.32
8.42
7.76
7.88
7.05
7.17
1.96
1.95
2.19
2.18
2.43
2.43
12.71
12.85
12.11
12.27
11.36
11.53
11.67
11.79
11.12
11.27
10.42
10.58
2.05
2.03
2.30
2.28
2.55
2.54
15.64
15.80
15.01
15.20
14.25
14.45
14.26
14.41
13.69
13.86
12.99
13.17
27.98
28.40
26.97
27.36
26.04
26.39
27.98
28.40
26.97
27.36
26.04
26.39
2.40
2.33
2.66
2.59
2.96
2.89
32.83
33.33
31.72
32.20
30.48
30.97
32.83
33.33
31.72
32.20
30.48
30.97
2.51
2.43
2.78
2.70
3.08
2.99
35.07
35.65
33.87
34.41
32.72
33.22
35.07
35.65
33.87
34.41
32.72
33.22
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
9.04
9.16
8.43
8.56
7.66
7.79
50XT
2.56
2.47
2.84
2.74
3.15
3.04
Total
System
KW
2.12
2.09
2.37
2.34
2.64
2.61
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap. — Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
5.39
5.47
4.80
4.89
4.09
4.18
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT048 Low Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT048 Low
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
15.42
15.58
14.83
15.01
14.13
14.33
2.15
2.12
2.41
2.37
2.68
2.64
43.68
44.63
41.97
42.84
40.41
41.15
43.68
44.63
41.97
42.84
40.41
41.15
2.76
2.66
3.05
2.93
3.37
3.24
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
17.00
17.18
16.35
16.55
15.58
15.80
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
26
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
57
(13.9)
62
(16.7)
63*
(17.2)
67
(19.4)
72
(22.2)
EWB
_F (_C)
54.46
43.33
44.86
35.33
56.01
50.62
40.75
42.11
33.69
58.46
59.23
63.56
69.55
56.01
57.19
58.18
62.48
68.41
4.48
4.39
4.32
4.31
4.29
4.59
4.50
4.42
4.42
4.41
2.71
29.14
30.17
24.40
41.69
38.83
31.09
32.23
25.68
41.76
45.04
49.59
41.69
41.98
42.72
46.03
50.62
2.72
35.96
40.94
2.72
2.72
2.72
2.68
2.68
2.69
2.69
39.88
39.88
2.70
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
58.24
58.24
75 (23.8)
Capacity
Total
MBtuh
System
KW
Total
Sens
See page 29 for cooling notes.
1370
1200
CFM
EVAPORATOR
AIR
50XT060 Low Cool
1750
2000
CFM
EWB
_F (_C)
EVAPORATOR
AIR
50XT060 High Cool
32.46
40.86
39.51
49.37
53.76
34.07
43.59
42.07
55.79
55.10
4.91
4.81
4.74
4.73
4.72
5.02
4.92
4.85
4.84
4.84
48.09
43.75
40.63
40.02
40.00
47.18
42.87
39.78
39.01
38.34
24.78
31.34
30.20
40.02
40.00
23.52
29.29
28.27
35.09
38.34
3.04
3.05
3.07
3.07
3.07
3.01
3.02
3.04
3.04
3.04
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
65.01
59.41
55.35
54.45
53.76
66.01
60.35
56.27
55.79
55.10
85 (29.4)
Capacity
Total
MBtuh
System
KW
Total
Sens
31.14
39.90
38.20
48.01
51.30
32.73
42.24
41.83
55.36
54.80
5.37
5.18
5.20
5.19
5.19
5.48
5.38
4.69
4.69
4.69
57.37
55.71
51.66
50.93
50.80
58.07
56.62
52.48
52.73
52.40
29.72
39.39
37.95
47.74
50.80
31.30
42.14
40.49
52.73
52.40
5.88
5.21
5.10
5.08
5.08
5.99
5.33
5.22
5.23
5.23
45.37
41.27
38.35
38.18
37.90
44.52
40.50
37.61
36.90
36.64
23.83
30.36
29.24
38.18
37.90
22.56
28.35
27.34
34.14
36.64
3.41
3.43
3.45
3.45
3.45
3.38
3.40
3.42
3.43
3.43
42.32
38.55
35.86
36.13
35.45
41.68
37.91
35.23
34.90
34.74
22.77
29.32
28.21
36.13
35.45
21.55
27.31
26.33
34.90
34.74
3.83
3.86
3.89
3.89
3.89
3.80
3.84
3.87
3.87
3.87
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
61.35
57.00
52.28
51.51
51.30
62.20
56.88
55.68
55.36
54.80
CONDENSER ENTERING AIR TEMPERATURES _F (_C)
95 (35)
105 (40.5)
Capacity
Capacity
Total
Total
MBtuh
MBtuh
System
System
KW
KW
Total
Sens
Total
Sens
Cooling Extended Performance Table
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
28.19
36.58
35.27
45.50
45.20
29.74
39.21
37.74
46.94
46.70
6.44
6.34
6.26
6.27
6.27
6.54
6.44
6.37
6.40
6.40
39.01
35.56
33.13
33.82
33.62
38.47
35.04
32.61
32.60
31.90
21.64
28.18
27.09
33.82
33.62
20.43
26.21
25.22
32.60
31.90
4.31
4.36
4.40
4.38
4.38
4.28
4.33
4.37
4.37
4.37
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
52.97
48.47
45.27
45.50
45.20
53.51
48.97
45.80
46.94
46.70
115 (46.1)
Capacity
Total
MBtuh
System
KW
Total
Sens
50XT
26.53
34.88
33.59
41.99
41.70
28.03
37.49
36.02
43.20
42.90
7.04
6.94
6.87
6.89
6.89
7.15
7.05
6.97
7.02
7.02
35.34
32.25
30.10
31.19
30.90
34.93
31.84
29.69
30.16
29.70
20.40
26.93
25.87
31.19
30.90
19.21
25.00
24.04
30.16
29.70
4.86
4.92
4.98
4.95
4.95
4.84
4.90
4.96
4.94
4.94
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
48.09
44.00
41.16
41.99
41.70
48.46
44.37
41.56
43.20
42.90
125 (51.6)
Capacity
Total
MBtuh
System
KW
Total
Sens
27
1750
2000
1750
2000
1750
2000
CFM
17.01
17.24
16.62
16.88
16.04
16.31
1750
2000
1750
2000
1750
2000
CFM
41.80
41.90
40.71
41.19
39.61
40.12
36.62
36.71
35.67
36.09
34.70
35.15
4.14
4.12
4.52
4.53
4.93
4.92
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
3.08
3.12
3.40
3.44
3.72
3.77
19.89
20.13
19.53
19.78
18.99
19.27
3.31
3.34
3.65
3.69
4.01
4.04
27.05
27.37
26.51
26.82
25.93
26.26
24.83
25.12
24.33
24.62
23.80
24.11
3.55
3.57
3.91
3.93
4.29
4.31
31.57
31.93
30.80
31.18
30.06
30.42
28.78
29.11
28.08
28.43
27.41
27.74
50.24
50.80
49.81
50.10
48.50
48.79
50.24
50.80
49.81
50.10
48.50
48.79
4.44
4.36
4.91
4.84
5.35
5.29
56.80
56.90
56.00
56.40
55.46
55.90
56.80
56.90
56.00
56.40
55.46
55.90
4.63
4.40
5.13
4.99
5.63
5.56
59.20
59.50
58.75
59.10
58.45
58.90
59.20
59.50
58.75
59.10
58.45
58.90
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
21.62
21.87
21.22
21.50
20.64
20.95
50XT
4.67
4.42
5.26
5.02
5.74
5.66
Total
System
KW
3.73
3.74
4.10
4.11
4.49
4.50
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap.— Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
70
(21.1)
80
(26.7)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
15.65
15.86
15.29
15.53
14.75
15.01
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT060 High Con’t.
70
(21.1)
80
(26.7)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT060 High
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
30.55
30.90
29.86
30.22
29.01
29.39
3.82
3.83
4.19
4.20
4.59
4.59
64.80
65.10
63.56
64.30
62.90
63.50
64.80
65.10
63.56
64.30
62.90
63.50
4.75
4.50
5.44
5.11
6.23
5.78
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
33.69
34.08
32.92
33.32
31.99
32.41
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
28
1200
1370
1200
1370
1200
1370
CFM
9.91
10.02
9.46
9.59
8.82
8.96
1200
1370
1200
1370
1200
1370
CFM
28.14
28.41
27.54
27.81
26.82
27.11
24.66
24.90
24.13
24.37
23.50
23.76
2.91
2.84
3.28
3.21
3.69
3.61
30 (-- 1.1)
Capacity
Total
MBtuh
System
KW
Total
Integ
2.55
2.55
2.89
2.89
3.25
3.25
12.36
12.48
11.94
12.08
11.36
11.52
2.64
2.62
2.99
2.97
3.36
3.34
17.58
17.73
17.10
17.29
16.47
16.67
16.14
16.28
15.69
15.87
15.12
15.30
2.72
2.69
3.08
3.05
3.46
3.43
20.92
21.10
20.40
20.61
19.75
19.98
19.07
19.23
18.60
18.79
18.01
18.22
35.04
35.43
34.06
34.46
33.24
33.60
35.04
35.43
34.06
34.46
33.24
33.60
3.03
2.94
3.40
3.31
3.82
3.71
40.62
41.18
39.50
40.01
38.34
38.85
40.62
41.18
39.50
40.01
38.34
38.85
3.13
3.03
3.51
3.40
3.92
3.80
43.31
43.95
42.04
42.63
40.91
41.41
43.31
43.95
42.04
42.63
40.91
41.41
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
40 (4.4)
47 (8.3)
50 (10)
Capacity
Capacity
Capacity
Total
Total
MBtuh
MBtuh
MBtuh
System
System
KW
KW
Total
Integ
Total
Integ
Total
Integ
13.43
13.56
12.98
13.13
12.35
12.52
3.18
3.07
3.56
3.44
3.99
3.85
Total
System
KW
2.78
2.74
3.15
3.10
3.54
3.49
OUTDOOR COIL ENTERING AIR TEMPERATURES _F (_C)
0 (-- 17.7)
10 (-- 12.2)
17 (-- 8.3)
Capacity
Capacity
Capacity
Total
Total
Total
MBtuh
MBtuh
MBtuh
System
System
System
KW
KW
KW
Total
Integ
Total
Integ
Total
Integ
Heating Capacity
LEGEND
Cap. — Heating Capacity (1000 Btuh) (Includes Indoor--Fan Motor Heat)
db — Dry Bulb
kW — Total Power Input (Includes Compressor Motor Power Input Outdoor--Fan Motor Input, and Indoor--Fan Motor Input)
rh — Relative Humidity
NOTES:
Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
9.11
9.22
8.70
8.82
8.11
8.24
- 10 (-- 23.3)
Capacity
Total
MBtuh
System
KW
Total
Integ
50XT060 Low Con’t.
80
(26.7)
70
(21.1)
60
(15.6)
EDB
_F
(_C)
INDOOR AIR
50XT060 Low
PERFORMANCE DATA--STANDARD ECM INDOOR MOTOR
50XT
20.36
20.54
19.88
20.08
19.29
19.51
2.81
2.76
3.18
3.13
3.57
3.52
53.58
54.06
51.83
52.74
50.19
51.04
53.58
54.06
51.83
52.74
50.19
51.04
3.38
3.19
3.77
3.62
4.21
4.04
60 (15.5)
Capacity
Total
MBtuh
System
KW
Total
Integ
22.45
22.64
21.92
22.14
21.27
21.51
20 (-- 6.6)
Capacity
Total
MBtuh
System
KW
Total
Integ
PERFORMANCE DATA (CONT)
Multiplication Factors
240
Voltage Distribution
V/3/60
200
208
230
240
Multiplication Factor
.69
.75
.92
1.00
LEGEND
BF— Bypass Factor
edb— Entering Dry--Bulb
Ewb— Entering Wet--Bulb
kW — Total Unit Power Input
ldb— Leaving Dry--Bulb
lwb— Leaving Wet--Bulb
SHC— Sensible Heat Capacity (1000 Btuh)
TC — Total Capacity (1000 Btuh) (net)
*At 75°F (23.8°C) entering dry bulb (Tennessee Valley Authority
[TVA] rating conditions); all other at 80°F (26.6°C) entering dry
bulb.
COOLING NOTES:
1. Ratings are net; they account for the effects of the evaporator
fan motor power and heat.
2. Direct interpolation is permissible. Do not extrapolate.
3. The following formulas may be used:
Example: 15.0 kW (at 240v) heater on 208v
= 15.0 (.75 mult factor)
= 11.25 capacity at 208v
Sensible capacity (Btuh)
1.10 x cfm
tldb
= tedb --
tlwb
=
hlwb
total capacity (Btuh)
= hewb --4.5 x cfm
Wet--- bulb temperature corresponding to enthalpy
air leaving evaporator coil (hlwb)
Where: hewb = Enthalpy of air entering evaporator coil
4. The SHC is based on 80_F (26.6_C) edb temperature of air
entering evaporator coil. Below 80_F (26.6_C) edb, subtract (corr
factor x cfm) from SHC.
Above 80_F (26.6_C) edb, add (corr factor x cfm) to SHC.
Correction Factor = 1.10 x (1 + BF) x (edb + 80).
5. Integrated capacity is maximum (instantaneous) capacity less the
effect of frost on the outdoor coil and the heat required to defrost it.
29
50XT
Heater kW
Rating
Wet coil air delivery -- low stage
208/230 VOLT
UNIT
SIZE
024
030
036
042
048
060
SYSTEM SETTING
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
0.1
0.2
0.3
525
600
525
600
525
600
613
700
613
700
613
700
743
850
743
850
743
850
853
975
853
975
853
975
963
1100
963
1100
963
1100
1200
1372
1200
1372
1200
1372
EXTERNAL STATIC PRESSURE (in. wc)
0.4
0.5
0.6
0.7
Variable based on Comfort Settings
525
525
525
525
600
600
600
600
Variable based on Comfort Settings
613
613
613
613
700
700
700
700
Variable based on Comfort Settings
743
743
743
743
850
850
850
850
Variable based on Comfort Settings
853
853
853
853
975
975
975
975
Variable based on Comfort Settings
963
963
963
963
1100
1100
1100
1100
Variable based on Comfort Settings
1200
1200
1200
1200
1372
1372
1372
1372
0.8
0.9
1.0
525
600
525
600
525
600
613
700
613
700
613
700
743
850
743
850
743
850
853
975
853
975
853
975
963
1100
963
1100
963
1100
1200
1372
1200
1372
1200
1372
0.8
0.9
1.0
700
800
700
800
700
800
875
1000
875
1000
875
1000
1050
1200
1050
1200
1050
1200
1225
1400
1225
1400
1225
1400
1400
1600
1400
1600
1400
1600
1750
2000
1750
2000
1750
2000
Wet coil air delivery -- high stage
208/230 VOLT
UNIT
SIZE
024
030
036
042
048
060
SYSTEM SETTING
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
COMFORT (Default)
EFFICIENCY
MAX
0.1
0.2
0.3
700
800
700
800
700
800
875
1000
875
1000
875
1000
1050
1200
1050
1200
1050
1200
1225
1400
1225
1400
1225
1400
1400
1600
1400
1600
1400
1600
1750
2000
1750
2000
1750
2000
EXTERNAL STATIC PRESSURE (in. wc)
0.4
0.5
0.6
0.7
Variable based on Comfort Settings
700
700
700
700
800
800
800
800
Variable based on Comfort Settings
875
875
875
875
1000
1000
1000
1000
Variable based on Comfort Settings
1050
1050
1050
1050
1200
1200
1200
1200
Variable based on Comfort Settings
1225
1225
1225
1225
1400
1400
1400
1400
Variable based on Comfort Settings
1400
1400
1400
1400
1600
1600
1600
1600
Variable based on Comfort Settings
1750
1750
1750
1750
2000
2000
2000
2000
Air delivery values are based on operating voltage of 230v, and wet coil. Filter and electric heater will not change air delivery values.
NOTES:
1. See User Interface instructions for more information on Max, Efficiency, and Comfort Settings
2. Efficiency Setting operates at 350 cfm/ton (nominal) and Max Setting operates at 400 cfm/ton (nominal)
30
TYPICAL PIPING AND WIRING
ROOF-MOUNTING
CURB
ROOF
RETURN-AIR
FLEXIBLE DUCT
SUPPLY-AIR
FLEXIBLE DUCT
CONCENTRIC DIFFUSER BOX
(FIELD-SUPPLIED)
CEILING
C00023
USER
INTERFACE
RETURN
AIR
FROM
POWER
SOURCE
TOP COVER
DISCONNECT
PER NEC*
*NEC - NATIONAL ELECTRICAL CODE
A06279
31
APPLICATION DATA
Condensate trap — A 2--in. (51 mm) condensate trap must be field
supplied.
1” (25mm) MIN.
TRAP
OUTLET
2” (50mm) MIN.
To convert a unit to downflow discharge — Units are equipped
with factory--installed inserts in the downflow openings. Remove the
inserts similar to removing an electrical knock--out. Leave on duct
covers to seal the horizontal discharge openings in the unit. Units
installed in horizontal discharge orientation do not require duct covers.
Minimum cooling ambient operating temperature — All standard units have a minimum ambient operating temperature of 55°F
(12.7°C). With low--ambient cooling enabled at the UI, units can operate at temperatures down to 0°F (--17.7°C).
Maximum operating outdoor air temperature — Maximum outdoor operating air temperature for cooling is 125°F (51.6°C).
Ductwork — Secure downflow discharge ductwork to roof curb. For
horizontal discharge applications, attach ductwork to unit with
flanges.
Balance Point Worksheet
Building Heat Loss, 1000BTUH
Unit Integrated Heating Capacity,
1000BTUH
70
Based on Entering Indoor Air of 70 Deg. F and Rated CFM
60
50
060
048
40
042
036
30
030
024
20
10
0
-20
-10
0
10
20
30
40
50
60
Outdoor Air Temp (Deg F)
C03008
32
ELECTRICAL DATA
UNIT SIZE
V--PH--HZ
VOLTAGE
RANGE
COMPRESSOR
OFM
FLA
IFM
FLA
ELECTRIC HEAT
SINGLE POINT POWER
SUPPLY
NOMINAL
FLA
MCA
MOCP
kW*
--/---/-24.3/24.3
35/35
3.8/5.0
18.1/20.8
46.9/50.3
50/60
024
208/230--1--60
187
253
15.3
52.0
0.9
4.3
5.4/7.2
26.0/30.0
56.8/61.8
60/70
7.5/10.0
36.1/41.7
69.4/76.4
70/80
--/---/-26.2/26.2
40/40
3.8/5.0
18.1/20.8
48.7/52.2
50/60
030
208/230--1--60
187
253
16.8
70.0
0.9
4.3
5.4/7.2
26.0/30.0
58.7/63.7
60/70
7.5/10.0
36.1/41.7
71.3/78.3
80/80
11.3/15.0
54.2/62.5
93.9/104.3
100/110
--/---/-28.6/28.6
45/45
3.8/5.0
18.1/20.8
51.2/54.6
60/60
036
208/230--1--60
187
253
16.7
82.0
0.9
6.8
5.4/7.2
26.0/30.0
61.1/66.1
70/70
7.5/10.0
36.1/41.7
73.7/80.7
80/90
11.3/15.0
54.2/62.5
96.3/106.7
100/110
--/---/-34.9/34.9
50/50
3.8/5.0
18.1/20.8
57.5/60.9
60/70
5.4/7.2
26.0/30.0
67.4/72.4
70/80
042
208/230--1--60
187
253
21.8
96.0
0.9
6.8
7.5/10.0
36.1/41.7
80.0/87.0
90/90
11.3/15.0
54.2/62.5
102.6/113.0
110/125
15.0/20.0
72.2/83.3
125.2/139.1
150/150
--/---/-43.1/43.1
60/60
3.8/5.0
18.1/20.8
65.7/69.1
70/70
5.4/7.2
26.0/30.0
75.6/80.6
80/90
048
208/230--1--60
187
253
27.8
96.0
1.5
6.8
7.5/10.0
36.1/41.7
88.2/95.2
90/100
11.3/15.0
54.2/62.5
110.8/121.2
125/125
15.0/20.0
72.2/83.3
133.4/147.3
150/150
--/---/-45.2/45.2
60/60
3.8/5.0
18.1/20.8
67.7/71.2
70/80
5.4/7.2
26.0/30.0
77.6/82.7
80/90
060
208/230--1--60
187
253
27.3
118.0
1.9
9.1
7.5/10.0
36.1/41.7
90.3/97.2
100/110
11.3/15.0
54.2/62.5
112.9/123.3
125/125
15.0/20.0
72.2/83.3
135.4/149.3
150/150
*Heater capacity (kW) based on heater voltage of 208v & 240v. If power distribution voltage to unit varies from rated heater voltage, heater kW will vary accordingly.
MIN
MAX
RLA
LRA
LEGEND
FLA
— Full Load Amps
LRA
— Locked Rotor Amps
®
MCA
— Minimum Circuit Amps
MOCP — Maximum Overcurrent Protection
RLA
— Rated Load Amps
NOTES:
1. In compliance with NEC (National Electrical Code) requirements
for multimotor and combination load equipment (refer to NEC
Articles 430 and 440), the overcurrent protective device for the
unit shall be Power Supply fuse . The CGA (Canadian Gas
Association) units may be fuse or circuit breaker.
2. Minimum wire size is based on 60 C copper wire. If other than
60 C wire is used, or if length exceeds wire length in table,
determine size from NEC.
33
TYPICAL WIRING SCHEMATIC — 230--1--60
A08201
34
CONTROLS
Sequence of Operation
The 50XT packaged heat pump is designed for installation with a
communicating UI. This unit will not respond to commands provided
by a common thermostat except under certain emergency situations.
The UI uses temperature, humidity and other data supplied from
indoor and outdoor system components to control heating or cooling
system for optimum comfort. The unit will be commanded by the UI
to supply airflow. The unit will operate the indoor fan at requested
airflow for most modes.
The nominal requested airflow in high stage will be 350 cfm per ton
of nominal cooling capacity as defined by unit size. Actual airflow
request will be adjusted from nominal using indoor and outdoor
temperature and indoor humidity data to optimize the system
operation for occupant comfort and system efficiency. Refer to UI
literature for further system control details.
Airflow during electric heater operation must be greater than a
minimum level for safe operation. If UI instructs unit to turn on
electric heat and the requested airflow is less than the minimum level
the fan coil control will override requested value.
NOTE: Once the compressor has started and then has stopped, it
should not be started again until 4 minutes have elapsed. The cooling
cycle remains “on” until the room temperature drops to point that is
slightly below the cooling control setting of the UI.
COOLING AND HEATING OPERATION
With a call for first stage cooling, the outdoor fan, reversing valve,
and low stage compressor are energized. If low--stage cannot
satisfy cooling demand, high--stage cooling is energized by the UI.
After second stage is satisfied, the unit returns to low--stage
operation until first stage is satisfied or until second stage is
required again. When both first stage and second stage cooling are
satisfied, the compressor will shut off. The reversing valve will
remain energized until the control board power is removed or a call
for heating is initiated. With a call for heating, the outdoor fan and
compressor are energized. The compressor will operate in high or
low stage operation, as needed, to meet the heating demand. When
the heating demand is satisfied, the compressor and fan will shut
off. The reversing valve is de--energized in the heating mode.
NOTE: When two--stage unit is operating at low--stage, system
vapor (suction) pressure will be higher than a standard single--stage
system or high--stage operation.
NOTE:
Outdoor fan motor will continue to operate for one
minute after compressor shuts off, when outdoor ambient is greater
than or equal to 100°F (38°C).
UTILITY INTERFACE WITH INFINITY CONTROL
The utility curtailment relay should be connected to factory
supplied pigtails (PINK connected to R, VIOLET connected to Y2
on the control board) located in the low voltage splice box (see
Typical Wiring Schematic ). This input allows a power utility
device to interrupt compressor operation during peak load periods.
When the utility sends a signal to shut the system down, the UI will
display “Curtailment Active”.
Infinity Controlled Low Ambient Cooling
NOTE: When this unit is operating below 55_F (12.7°C) outdoor
temperature, provisions must be made for low ambient operation.
This unit is capable of low ambient cooling down to 0_F
(--17.7°C)ONLY when using the Infinity control. A low ambient kit
is not required, and the outdoor fan motor does not need to be replaced
for Infinity controlled low ambient operation. Low ambient cooling
must be enabled in the UI set--up. Fan may not begin to cycle until
about 40_F (4.4°C) OAT. Fan will cycle based on coil and outdoor
air temperature.
35
GUIDE SPECIFICATIONS
SINGLE--PACKAGED HEAT PUMP UNITS
CONSTANT VOLUME APPLICATION
HVAC GUIDE SPECIFICATIONS
SIZE RANGE: 2 TO 5 TONS, NOMINAL (COOLING)
MODEL NUMBER: 50XT
PART I -- GENERAL
SYSTEM DESCRIPTION
Outdoor rooftop or ground mounted heat pump unit utilizing a
hermetic, 2--stage scroll compressor for heating and cooling duty
and optional electric heating. Unit shall discharge supply air vertically or horizontally as shown on contract drawings. Outdoor
fan/coil section shall have a draw--thru design with vertical discharge for minimum sound levels.
QUALITY ASSURANCE
A. Unit shall be rated in accordance with ARI Standards
210/240 and 270.
B. Unit shall be designed in accordance with UL Standard
1995.
C. Unit shall be manufactured in a facility registered to ISO
9001 manufacturing quality standard
D. Unit shall be UL listed and c--UL certified as a total
package for safety requirements.
E. Roof curb shall be designed to conform to NRCA
Standards.
F. Insulation and adhesives shall meet NFPA 90A
requirements for flame spread and smoke generation.
G. Cabinet insulation shall meet ASHRAE Standard 62P.
DELIVERY, STORAGE, AND HANDLING
Unit shall be stored and handled per manufacturer’s recommendations.
2. Fan wheel shall be made from steel, be double--inlet type. It
shall have forward--curved blades with a corrosion--resistant
finish and shall be dynamically balanced.
3. Outdoor fan shall be of the direct--driven propeller type with
aluminum blades, riveted to corrosion--resistant steel spiders.
It shall be dynamically balanced, and discharge air vertically.
D. Compressor:
1. Fully hermetic, 2--stage scroll compressors with
factory--installed vibration isolation.
2. Scroll compressors shall be standard on all units.
3. Compressor Protection:
Defrost control shall protect compressor by preventing
“short cycling.”
E. Coils:
1. Indoor and outdoor coils shall have aluminum plate fins
mechanically bonded to seamless copper tubes with all joints
brazed.
2. Tube sheet openings shall be bellied to prevent tube wear.
F. Refrigerant Metering Device:
Refrigerant metering device shall be of the single body,
fixed orifice feed type (outdoor) and TXV (indoor).
G. Filters:
Filter section shall consist of field--installed, throw--away,
1--in. thick fiberglass filters of commercially available sizes.
H. Controls and Safeties:
1. Unit controls shall be complete with self--contained low
voltage control circuit.
2. Units shall incorporate an internal compressor protector that
provides reset capability.
3. Unit shall provide high-- and low--/loss--of--charge pressure
safety protection.
I. Operating Characteristics:
1. Unit shall be capable of starting and running at 125°F
(51.6_C) ambient outdoor temperature, exceeding maximum
load criteria of ARI Standard 240.
PART 2-- PRODUCTS
EQUIPMENT
A. General:
Factory--assembled, single--piece, heat pump. Contained within
the unit enclosure shall be all factory wiring, piping, controls, refrigerant charge (R--410A), and special features required prior to
field start--up.
B. Unit Cabinet:
1. Unit cabinet shall be constructed of phosphated, zinc--coated,
prepainted steel capable of withstanding 500 hrs of salt spray.
2. Normal service shall be through a single removable cabinet
panel.
2. Compressor shall be capable of operation down to 55°F
(12.7_C) ambient outdoor temperature in cooling and --10°F
in heating.
3. Unit shall be capable of low--ambient cooling (below 55_F
(12.7_C) ambient outdoor temperature) with low--ambient
cooling enabled on the UI.
J. Electrical Requirements:
All unit power wiring shall enter unit cabinet at a single location.
K. Motors:
1. Compressor motors shall be of the refrigerant--cooled type
with line--break thermal and current overload protection.
3. The unit shall be constructed on a rust proof unit base that has
an externally trapped, integrated sloped drain pan.
4. Indoor fan compartment top surface shall be insulated with a
minimum 1/2--in. (13 mm) thick, flexible fiberglass
insulation, coated on the air side and retained by adhesive and
mechanical means. The indoor wall sections will be insulated
with a foil--faced insulation capable of being wiped clean.
Aluminum foil--faced fiberglass insulation shall be used in the
entire indoor air cavity section.
2. All fan motors shall have permanently lubricated bearings and
inherent automatic--reset thermal overload protection.
3. Outdoor fan motor shall be totally enclosed.
L. Grille
1. Louvered Grille:
Louvered grille shall be standard on all units.
5. Unit shall have a field--supplied condensate trap.
C. Fans:
1. The indoor fan shall be variable--speed motor and control, as
shown on equipment drawings.
36
GUIDE SPECIFICATIONS (CONT)
6. Filter Rack Kit:
Shall provide filter mounting for downflow and horizontal
applications.
M. Special Features:
1. Coil Options:
Shall include factory--installed optional tin--plated indoor
copper/copper and vinyl--coated refrigerant coils.
7. Square--To--Round Duct Transitions:
Shall have the ability to convert the supply and return openings from rectangular to round (024--048 sizes only).
2. Flat Roof Curb:
Curbs shall have seal strip and a wood nailer for flashing and
shall be installed per manufacturer’s instructions.
8. Crankcase Heater:
Shall provide anti--floodback protection for low--load cooling applications. (Standard on 042--060 sizes.)
3. Manual Outdoor Air Damper:
Package shall consist of damper, bird screen, and rain hood
which can be preset to admit outdoor air for year--round ventilation.
9. Electric heaters:
a. Electric heater shall be available as a field--installed
option.
b. Heater elements shall be open--wire type, adequately
supported and insulated with ceramic bushings.
c. Electric heater packages must provide single--point
power connection capability.
4. Infinityt User Interface:
To provide for two--stage heat pump heating, two--stage cooling, and electric (auxiliary) heat, in addition to manual or automatic changeover and indoor fan control.
10. Compressor Hard Start Kit:
Shall be available to give a boost to the compressor motor at
each start--up.
5. Low--Ambient Cooling:
Low--ambient cooling must be enabled in the UI setup to allow unit to operate down to 0°F (--17_C) outdoor ambient
temperature in cooling.
37
Copyright 2008 Carrier Corp. D 7310 W. Morris St. D Indianapolis, IN 46231
Printed in U.S.A.
Edition Date: 06/08
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
38
Catalog No: 50XT ---04PD
Replaces: 50XT--- 3PD
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:07:01 08:45:49-04:00 Create Date : 2008:07:01 08:23:03-04:00 Metadata Date : 2008:07:01 08:45:49-04:00 Format : application/pdf Title : 50XT P1-6 Creator : bact2wt Document ID : uuid:848a9425-628e-44db-9ff4-6c796bf92337 Instance ID : uuid:cfd2e73b-464c-4ef1-94f5-7fc7ffd57f17 Page Count : 38 Author : bact2wtEXIF Metadata provided by EXIF.tools