Casio Electronic Keyboard Ctk 530 Users Manual S/M

CTK-530 to the manual d22b8b53-5629-43a4-b02d-5636b997bc96

: Casio Casio-Casio-Electronic-Keyboard-Ctk-530-Users-Manual-243273 casio-casio-electronic-keyboard-ctk-530-users-manual-243273 casio pdf

Open the PDF directly: View PDF .
Page Count: 18

Download
Open PDF In Browser	View PDF

(with price)

CTK-530

ELECTRONIC KEYBOARD

CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Circuit Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Major waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PCB View and Check Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Schematic Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Exploded View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SPECIFICATIONS
GENERAL
Number of keys:
Polyphonic:
Preset tones:
Keyboard controls:
Auto-rhythms:
Auto-accompaniment:
Digital volume controls:
Demo tunes:

Tuning control:
Built-in speakers:
MIDI:
Terminals:
Auto power off:
Power source:

Power consumption:
Dimensions (HWD):
Weight:

61
24-note
64
Touch response: On/Off,
Key transpose: Range from F# to F by a semitone increment
64, Tempo control: 40 to 255
Mode: CASIO Chord/Fingered/Full-Range Chord 1/Full-Range Chord 2
Controller: Fill-In, Synchro/Ending
Main volume: 10 steps
Accompaniment volume: 100 steps
3, A Night has 9000 Bars (arranged and programmed byThomas Hirsch)
Wanting This (Edward Alstrom)
Supersonic Remorse (Edward Alstrom)
440Hz ± 50 cents
12 cm dia. 2 W input rating: 2 pcs.
16 multi-channel reception
Phone Jack [Output impedance: 50 Ω, Output voltage: 4.0 V(rms) MAX],
MIDI Jacks (IN, OUT), AC Adapter Jack (9 V)
Approximately 6 minutes after the last operation
2-way AC or DC source
AC: AC adapter AD-5
DC: 6 D size dry batteries
Battery life: approx. 5 hours by manganese batteries R20P/SUM-1
7.7 W
99 x 931 x 326 mm (3-7/8 x 36-5/8 x 12-13/16 inches)
4.4 kg (9.7 lbs) excluding batteries

ELECTRICAL
Current Drain with 9 V DC:
No Sound Output
Maximum Volume
with keys C3 to E4 pressed in Synth-Lead 1 tone
Volume: maximum, Touch response: maximum

—2—

180 mA ± 20%
825 mA ± 20%

Headphone output level (Vrms with 8 Ω load each channel):
with key C3 pressed in Pan Flute tone
Output level (Vrms with 47 kΩ load each channel):
with key C2 pressed in Pan Flute tone
Speaker output level (Vrms with 4 Ω load each channel):
with key A1 pressed in Pan Flute tone
Minimum operating voltage:

210 mV ± 20%
2000 mV ± 20%
2150 mV ± 20%
6.3 V

BLOCK DIAGRAM

LED Latch
IC107
HD74HC373P

LED driver
Q111 ~ Q118

La ~ Lg, Lp
LEDs /
7Seg. LED

MA8
~
MA11

Sound Source ROM
(8M-bit)
LSI102
MX23C8100MC12CA19

LED driver
IC106
BA612

LED Latch
IC105
HD74HC75P
MD0
~
MD7

FI0 ~ FI7
SI0 ~ SI7

MD0 ~ MD15

Keyboard
CPU

MA0 ~ MA19

KC0 ~ KC7
LSI101
UPD912GF-3BA

Reset IC
IC104
RE5VA35AA

FI10

RESET

IN

KI0
~ KI2

OUT

NMI

MIDI

Buttons

VDD

Power Switch
LRCK, SO, BCK

VC

LVDD
VCC

AVDD

D/A Converter
IC103
UPD6379GR

DVDD
VDD

Output
Power Supply Circuit
Q101 ~ Q105, Q110, Q119
D104, D105, D109

APO

Filter
Q108, Q109
Speakers

Power Amplifier
IC101
LA4598

—3—

CIRCUIT DESCRIPTION
KEY MATRIX
KC0

KC1

KC2

KC3

KC4

KC5

KC6

KC7

FI0

C2 (1)

C#2 (1)

D2 (1)

D#2 (1)

E2 (1)

F2 (1)

F#2 (1)

G2 (1)

SI0

C2 (2)

C#2 (2)

D2 (2)

D#2 (2)

E2 (2)

F2 (2)

F#2 (2)

G2 (2)

FI1

G#2 (1)

A2 (1)

A#2 (1)

B2 (1)

C3 (1)

C#3 (1)

D3 (1)

D#3 (1)

SI1

G#2 (2)

A2 (2)

A#2 (2)

B2 (2)

C3 (2)

C#3 (2)

D3 (2)

D#3 (2)

FI2

E3 (1)

F3 (1)

F#3 (1)

G3 (1)

G#3 (1)

A3 (1)

A#3 (1)

B3 (1)

SI2

E3 (2)

F3 (2)

F#3 (2)

G3 (2)

G#3 (2)

A3 (2)

A#3 (2)

B3 (2)

FI3

C4 (1)

C#4 (1)

D4 (1)

D#4 (1)

E4 (1)

F4 (1)

F#4 (1)

G4 (1)

SI3

C4 (2)

C#4 (2)

D4 (2)

D#4 (2)

E4 (2)

F4 (2)

F#4 (2)

G4 (2)

FI4

G#4 (1)

A4 (1)

A#4 (1)

B4 (1)

C5 (1)

C#5 (1)

D5 (1)

D#5 (1)

SI4

G#4 (2)

A4 (2)

A#4 (2)

B4 (2)

C5 (2)

C#5 (2)

D5 (2)

D#5 (2)

FI5

E5 (1)

F5 (1)

F#5 (1)

G5 (1)

G#5 (1)

A5 (1)

A#5 (1)

B5 (1)

SI5

E5 (2)

F5 (2)

F#5 (2)

G5 (2)

G#5 (2)

A5 (2)

A#5 (2)

B5 (2)

FI6

C6 (1)

C#6 (1)

D6 (1)

D#6 (1)

E6 (1)

F6 (1)

F#6 (1)

G6 (1)

SI6

C6 (2)

C#6 (2)

D6 (2)

D#6 (2)

E6 (2)

F6 (2)

F#6 (2)

G6 (2)

FI7

G#6 (1)

A6 (1)

A#6 (1)

B6 (1)

C7 (1)

SI7

G#6 (2)

A6 (2)

A#6 (2)

B6 (2)

C7 (2)

+

-

0

Accomp.
Volume Up

Main Vol.
Up

Mode

FI10
KI0

Demo

3

2

1

Tempo
Up

Main Vol.
Down

Intro/
Fill-In

KI1

Transpose
Tune/MIDI

6

5

4

Rhythm

Accomp.
Vol. Down

Synchro/
Ending

KI2

Touch
Response

9

8

7

Tone

Tempo
Down

Start/
Stop

Note: Each key has two contacts, the first conatct (1) and second contact (2).

Key

FI
Second contact (2)

First contact (1)

KC
SI

—4—

NOMENCLATURE OF KEYS
C#2 D#2

C2

D2

E2

F#2 G#2 A#2

F2

G2

A2

C#3 D#3

B2

C3

D3

E3

F#3 G#3 A#3

F3

G3

A3

F#4 G#4 A#4

C#4 D#4

B3

C4

D4

E4

F4

G4

A4

C#5 D#5

B4

C5

D5

E5

F#5 G#5 A#5

F5

G5

A5

B5

C#6 D#6

C6

D6

E6

F#6 G#6 A#6

F6

G6

A6

B6 C7

RESET CIRCUIT
When batteries are set or an AC adapter is connected, the reset IC provides a low pulse to the CPU. The CPU
then initializes its internal circuit.
When the power switch is pressed, the CPU receives a low pulse of POWER signal.The CPU raises APO signal
to +5 V to turn power on.
VDD

Battery set
VDD

POWER

NMI
RESET
Reset IC
IC104
RE5VA35AA

From power switch

CPU
LSI101
UPD912GF-3BA
APO

Power Supply Circuit

SCKO

CPU (LSI101: UPD912GF-3BA)
The 16-bit CPU contains a 1k-byte RAM, three 8-bit I/O ports, two timers, a keycontroller and serial interfaces.
The CPU detects key velocity by counting the time between first-key input signal FI and second-key SI from
the keyboard. The CPU reads sound data and velocity data from the sound source ROM in accordance with
the selected tone; the CPU can read rhythm data simultaneously when a rhythm pattern is selected. Then the
CPU provides 16-bit serial sound data to the DAC.The CPU also controls MIDI input/output and LED driving.

Sound Source ROM
LSI102
MX23C8100PC-12CA19
CE

MSB0

A0 ~ A18

D0 ~ D15

MA1 ~
MA19

MD0 ~
MD15

SO: Sound data
BOK: Bit clock
LRCK: Word clock

From keyboard
FI0 ~ FI7
SI0 ~ SI7

CPU

SO

DAC
IC103
SI

BOK

CLK

LRCK

LRCK

LSI101
PG
X101

UPD912GF-3BA

20 MHz

—5—

UPD6379GR

ROUT

LOUT

The following table shows the pin functions of LSI101.

Pin No.
1

Terminal
TXD0

In/Out
Out

2
3
4~6

RXD0
SCK0

In
Out

7
8, 9

AVCC
AN0, AN1

In

10
11
12

AGND
BCK
SO

In
Out
Out

13
14
15, 16
17

LRCK
GND
XLT0, XLT1
VCC

Out
In
In/Out
In

18, 19
20
21
22

MD0, MD1
RSTB
NMI
INT
FI0 ~ FI3
SI0 ~ SI3
KC0 ~ KC7
FI4 ~ FI7
SI4 ~ SI7

In
In
In

Mode selection terminal. Connected to ground.
Reset signal input
Power ON signal input
Not used. Connected to ground.

In

Key input signal

23 ~ 30
31 ~ 38
39 ~ 46
47 ~ 50
51
52
53 ~ 55
56
57 ~ 76
77
78, 79
80

Out
In

Function
MIDI signal input
MIDI signal output
APO (Auto Power Off) signal output
Not used. Connected to ground.
Ground (0 V) source
Not used. Connected to ground.
Ground (0 V) source
Bit clock output
Serial sound data output
Word clock output
Ground (0 V) source
20 MHz clock input/output
+5 V source

Key scan signal output
Key input signal

VCC

In
In
In
In
Out
Out
Out
Out
In

Not used.
Button input signal input
Not used
Button input signal input
Not used.
Address bus
Chip enable signal output for the sound source ROM
Not used
+5 V source

81
82
83 ~ 98
99

GND
MRDB
MD0 ~ MD15
PLE

In
Out
In/Out
Out

Ground (0 V) source
Read enable signal output for the sound source ROM
Data bus
Latch enable signal output for LED latches

100

P17

In

FI10
SI10
KI0 ~ KI2
MWNB
MA1 ~ MA17
MCSB0

APO cancellation signal input

DAC (IC103: UPD6379GR)
The DAC receives 16-bit serial data output from the CPU. The data contains digital sound data of the melody,
chord, bass, and percussion for the right and left channels. The DAC converts the data into analog waveforms
and output them to each channel separately.

—6—

FILTER BLOCK
Since the sound signals from the DAC are stepped waveforms, the filter block is added to smooth the
waveforms.

Filter Block
To power amplifier

From DAC

POWER AMPLIFIER (IC102: LA4598)
The power amplifier is a two-channel amplifier with standby switch.
The following table shows the pin function of IC102.
Pin No.
1
2
3
4
5
6
7
8
9

Terminal
Power GND
Ch1 B.S.
Ch1 OUT
VCC
Ch1 N.F.
Ch1 IN
D.C.
Pre GND
Stand by

In/Out
In

In
In

Ground (0V) source
Terminal for a bootstrap capacitor
Channel 1 output
+9V source
Negative feedback input
Channel 1 input
Terminal for a decoupling capacitor
Ground (0V) source
Power control signal input. 0 V: Off, +9 V: On

10
11

Ch2 IN
Ch2 N.F.

In
In

Channel 2 input
Negative feedback input

12
13
14

Ch2 OUT
Ch2 B.S.
NC

Out

Out
In
In
In

Function

Channel 2 output
Terminal for a bootstrap capacitor
Not used

POWER SUPPLY CIRCUIT
The power supply circuit generates six voltages as shown in the following table. VDD voltage is always
generated. The others are controlled by APO signal from the CPU.
Name
VDD
DVDD
AVDD
LVDD
VCC
VC

Voltage
+5 V
+5 V
+5V
+5 V
+9 V
+9 V

For operation of
CPU, Reset IC, Sound source ROM, LED Latches
Power jack, Photocoupler
DAC, Filter
LED Drivers
Power amplifier, Pilot lamp
Power amplifier

—7—

LED DRIVING
LVDD

Q111 ~Q118
LED Driver
LED Latch
IC107
HD74HC373AP

La ~ Lg, Lp

MD0 ~ MD7
CPU
PLE

IC106
BA612
LED Driver

UPD912GF-3BA

LED Latch
IC105
HD74HC75AP

LO0 ~LO3

LSI101

LG

—8—

MD8 ~ MD11

MAJOR WAVEFORMS

50 µs

0.1 s

1

CH1

4

A

A 1 ms

1 ms

CH1

5

C

CH1

E

CH1

D

CH2

F

CH2

CH2

CH2

2
3

CH3

CH1: 5 V CH2: 5 V

6

CH3: 5 V

CH3

CH1: 5 V CH2: 5 V

~
~
CH1: 0.2 V CH2: 0.2 V

~
~
CH1: 0.2 V CH2: 0.2 V

CH3: 5 V

1 POWER ON signal
UPD912GF-3BA pin 21

4 Key scan signal KC0
UPD912GF-3BA pin 31

C DAC output (R-ch)
UPD6379GR pin 5

E Amp. input (R-ch)
LA4598 pin 6

2 APO signal
UPD912GF-3BA pin 3

5 Key scan signal KC1
UPD912GF-3BA pin 32

D DAC output (L-ch)
UPD6379GR pin 8

F Amp. input (L-ch)
LA4598 pin 10

3 Reset signal for the DSP
UPD912G-3BA pin 99

6 Key scan signal KC2
UPD912GF-3BA pin 33

A 2 µs

A 5 ms

7

Tone: Pan Flute (39)
Key: A4
Touch response: Off
Volume: Maximum

CH1

8

CH2

9

CH3

0

CH1
CH2

A

B
–
–
–
CH1: 5 V CH2: 5 V CH3: 5 V

CH3
–
–
–
CH1: 5 V CH2: 5 V CH3: 5 V

7 LED drive signal
BA612 pin 13

0 Word clock LRCK
UPD912GF-3BA pin 13

8 LED drive signal
BA612 pin 12

A Data signal SO
UPD912GF-3BA pin 12

9 LED drive signal
BA612 pin 11

B Bit clock BCK
UPD912GF-3BA pin 11

—9—

PCB VIEW AND CHECK POINTS

— 10 —

SCHEMATIC DIAGRAMS
JCM460-MA1M

5.1

4.5

0.0
5.1

3

13

10 11 12

15

2

8.3
5.1

7.6

5.7

7

8

14

9

16
5.1
2.3

0.0
0.7
8.2

7.5

1.7

1
2.3

5.1
1.7

4
5.1
7.5

5.7

5.1

5.7

— 11 —

5

6

JCM617T-KY1M/KY2M

— 12 —

EXPLODED VIEW
11
10
2
9
5

1
3

12

6
4

7

9
13
14

8
15

16

17
17-2
18
19

17-1

20

21
23

22

— 13 —

PARTS LIST
CTK-530

Notes:

1.

Prices and specifications are subject to change without prior notice.

2.

As for spare parts order and supply, refer to the
"GUIDEBOOK for Spare parts Supply", published
seperately.

3.

The numbers in item column correspond to the same
numbers in drawing.

N

Item

N
N
N

8
LSI101
LSI102
IC101
IC102
IC103
IC104
IC105
IC106
IC107
Q101, Q103
Q102, Q104,
Q105,
Q107~Q109
Q106, Q119
Q110
Q111~Q118
X101
D101
D102
D103, D107,
D108,
D110~D136
D104, D105
D106
D109
LED101~
LED107
LED108
J101
J102
J103
L107
MC101~
MC103

N
N
N

N

Code No.

N
N
N
N
N
N
N
N

1
2
3
4
5
6
7
9
10
11
12
13
Notes:

Specification

PCB ass'y JCM460-MA1M
LSI
LSI
IC
IC
LSI
IC
IC
IC
IC
Transistor
Transistor

M140198*1
UPD912GF-3BA
MX23C8100PC-12CA19
PC900V
LA4598
UPD6379GR
RE5VA35AA-TZ
HD74HC75P
BA612
HD74HC373P
2SB1237Q,R-TV6-T
2SC1740SQ-TP-T

2200 4409
2253 0357
2259 1883
2590 2009
2390 1316
2390 0371
2390 1344

Transistor
Transistor
Digital transistor
Cryatal oscillator
Diode
Diode
Diode

2SA933-SQ-TP-T
2SD2008Q,R-T105-T
DTA114TS-TP-T
HC-49/US20A
SB10-04A3-BT-T
DSK10B-BT-T
1SS133T-77-T

2360 1085
2360 2079
2360 1946
2370 1106

Zener diode
Zener diode
Zener diode
LED

2370 1141
3501 7049
3612 0665
3501 4816
3841 1057
2845 0168

LED
Jack, Power
Jack, Phone
Jack, DIN
Coil
Module capacitor

Keyboard PCBs
6923 6940 PCB ass'y M617T-KY1M
2301 0101 Diode
6923 6950 PCB ass'y M617T-KY2M
2301 0101 Diode
Mechanical Parts
6923 7050 Rubber button
6922 2680 Rubber button
6923 4331 Rubber button
6923 7040 Rubber button
6923 7030 Rubber button
6923 4990 Rubber button, MODE
6923 4980 Rubber button, POWER
3831 0833 Speaker
6923 7020 Panel
6923 7010 Display plate
6922 2840 White key set, CEGB
6922 2860 White key set, DFAS
N – New parts
M – Minimum order/supply quantity
R – Rank
— 15 —

20
D501~D564
21
D565~D622
N

Main PCB
6923 6930
2012 0168
2012 0686
2114 1421
2114 2891
2105 4249
2105 3941
2105 4438
2114 3318
2105 4431
2251 0469
2220 1387

Parts Name

Q

FOB Japan
N.R.Yen
R
Unit Price

1
1
1
1
1
1
1
1
1
1
2
6

5,550
750
840
210
140
150
44
44
98
85
24
13

B
A
A
B
A
A
A
B
A
B
A
B

2
1
8
1
1
1
30

14
30
10
110
28
11
3

B
A
B
A
B
B
B

HZS6B1LTD-T
MTZJ4.7AT-77-T
MTZJ5.6CT-77-T
MPR3338S-B99

2
1
1
7

10
8
8
24

A
A
A
B

SL-9352-60
HEC2305-01-330
YKB21-5006
YKF51-5051
CM05RB01
CNB8X101K

1
1
1
1
1
3

200
29
60
110
63
58

B
A
B
B
C
C

1
64
1
58

750
8
710
8

B
C
B
C

1
1
1
1
1
1
1
2
1
1
5
1

75
29
97
95
160
28
28
450
1,300
120
100
100

B
B
B
B
B
B
B
B
B
B
A
A

M140211*1
1S2473-T-77-T
M140212*1
1S2473-T-77-T
M340082-1
M312082-2
M312088A-2
M240127-1
M240096-1
M312123-2
M312122-2
S12J49A
M140046-1
M340157-1
M111723-1
M111725-1

N

N

N

Item
14
15
16
17
17-1
17-2
18
19
22
23

Notes:

Code No.

Parts Name

6922 2850 White key set, DFA
6922 2750 Black key set, 5-key
6922 2740 Black key set, 10-key
6923 7060 Case
6902 6140 Battery spring (-)
6903 2150 Battery spring (+)
6922 2771 Key contact rubber
6922 2761 Key contact rubber
6923 7000 Bottom plate
6918 1636 Battery cover
Accessory
6916 7880 Music stand
N – New parts
M – Minimum order/supply quantity
R – Rank

Specification

Q

M111724-1
M111726-2
M111726-1
M140171*1
M41226-1
M41330-1
M211704A-1
M211705A-1
M240116-1
M311164F*1

4
1
2
1
1
1
4
1
1
1

M310827-1

1

FOB Japan
N.R.Yen
R
Unit Price
100
A
86
A
120
A
2,470
C
27
B
18
B
89
A
91
A
630
C
200
B
120

Description of Capacitors
A general description of capacitors is shown in the following table.
The description consists of Type, Value, Rated Voltage and Tolerance.
When you need a capacitor, please find a substitution in your country by yourselves referring to the
description.
Ref. No of Capacitor
C101, C107, C125, C211
C110, C153
C103, C104, C113, C114, C121, C137~C139, C145, C167, C171, C193,
C197
C108
C152, C162
C111, C182
C102, C124, C126, C134, C159~C161
C123, C127
C144, C165
C147, C164
C130, C131
C128, C129, C154, C174
C118, C119
C140, C155, C166, C170, C175~C179, C181, C185, C186, C188, C189,
C192, C194~C196, C198, C200
C105, C120, C132, C133, C135, C136, C141, C142, C146~C150, C163,
C172, C173, C180, C184, C187, C212~C214
C122, C199
C168
C191
C156, C157
C190
C116, C117
C112, C115

— 16 —

Description
Electrolytic, 16 V, 470 µF, +/-20%
Electrolytic, 6.3 V, 220 µF, +/-20%
Electrolytic, 10 V, 22 µF, +/-20%
Electrolytic, 16 V, 10 µF, +/-20%
Electrolytic, 50 V, 1 µF, +/-20%
Electrolytic, 6.3 V, 470 µF, +/-20%
Electrolytic, 6.3 V, 100 µF, +/-20%
Electrolytic, 10 V, 100 µF, +/-20%
Semiconductive, 16 V, 2200 pF, +/-10%
Semiconductive, 16 V, 0.033 µF, +/-10%
Semiconductive, 16 V, 0.047 µF, +/-10%
Semiconductive, 16 V, 0.01 µF, +/-10%
Semiconductive, 16 V, 0.018 µF, +/-10%
Ceramic, 50 V, 0.1 µF, +80/-20%
Ceramic, 50 V, 100 pF, +/-10%
Ceramic, 50 V, 1000 pF, +/-10%
Ceramic, 50 V, 0.01 µF, +/-20%
Semiconductive, 16 V, 33 pF, +/-10%
Semiconductive, 16 V, 4 pF, +/-0.5 pF
Semiconductive, 16 V, 22 pF, +/-10%
Mylar, 50 V, 0.047 µF, +/-10%
Electrolytic, 10 V, 1000 µF, +/-20%

B

Description of Resistors
A general description of resistors is shown in the following table.
The description consists of Type, Value, Rated Wattage and Tolerance.
When you need a resistor, please find a substitution in your country by yourselves referring to the
description.
Note:
All resistors are carbon film, 1/5 watt, +/-5% otherwise specified.
Ref. No of Resistor
R107, R137, R145~R147, R150, R163, R164, R168~R170, R189
R102, R103, R133, R135, R142
R220~R230
R132, R143, R159, R185, R292
R115, R116, R127, R139~R141, R149, R158, R166, R171~R173,
R186~R188, R206, R208~R211, R213, R215
R175, R212, R214
R105, R138, R148, R161, R274, R293, R295
R110, R291
R117, R118
R111~R114
R125, R126, R160
R207
R134
R136
R106, R108, R151~R157, R165, R251~R273, R275~R283
R104, R294
R178~R184, R218, R219, R231~R250
R216
R174, R176, R177, R192~R199
R123, R124, R130, R131
R128, R129
R217
R162, R167
R190, R191, R200~R205
R120, R121, R144

— 17 —

Description
1 KΩ
220 Ω
330 Ω
10 Ω
100 Ω
100 KΩ
10 KΩ
22 Ω
3.3 Ω
82 Ω
4.7 KΩ
1.5 KΩ
2.2 KΩ
270 Ω
470 Ω
47 KΩ
56 KΩ
1 MΩ
33 KΩ
15 KΩ
5.6 KΩ
560 Ω
18 KΩ
33 Ω
47 Ω

MA0700951A



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 1997:04:03 15:02:33
Producer                        : Acrobat Distiller 3.0 for Macintosh
Modify Date                     : 1998:04:15 10:28:52
Title                           : S/M CTK-530
Subject                         : JUL.95
Author                          : MAS
Keywords                        : EMI
Page Count                      : 18
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools