Casio Cdp 230R Owners Manual CDP230R_EN

Web_CDP230-ES-1B Web_CDP230-ES-1B_EN CDP-230R | Electronic Musical Instruments | Manuals | CASIO

2015-03-09

: Casio Casio-Cdp-230R-Owners-Manual-590472 casio-cdp-230r-owners-manual-590472 casio pdf

Open the PDF directly: View PDF .
Page Count: 80

Download
Open PDF In Browser	View PDF

２０１４年２月１９日 水曜日 午後５時１３分

CDP-230R
USER’S GUIDE

EN/ES

English

1 ページ

Please keep all information for future reference.
Safety Precautions
Before trying to use the Digital Piano, be sure to read
the separate “Safety Precautions”.

This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.

GUÍA DEL USUARIO
Guarde toda la información para futuras consultas.
Precauciones de seguridad
Antes de intentar usar el piano digital, asegúrese de
leer las “Precauciones de seguridad” separadas.

MA1402-B Printed in China

CDP230-ES-1B

Español

CDP230R_es_Cover1-4.fm

2 ページ

２０１４年２月１９日 水曜日 午後５時１３分

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

*1: Depende del tono.
*2: Para obtener información acerca de NRPN, RPN y
los mensajes exclusivos del sistema, consulte
Implementación MIDI en http://world.casio.com/.
*3: De acuerdo con el ajuste de efecto de pedal.
*4: En este producto, la función Hall se considera como
un tipo de reverberación.

O : Yes
X : No
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY

X
O
X
O
X
X
: All sound OFF
: Reset all controller
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
Aux
Messages

O
O
: Clock
: Commands
System
Real Time

X
X
X
: Song Pos
: Song Sel
: Tune
System
Common

O *2
:True #

Key’s
Ch’s

After
Touch

Pitch Bender

Note ON
Note OFF
Velocity

True voice

Note
Number

Program
Change

Default
Messages
Altered
Mode

Function

Model: CDP-230R

FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

System Exclusive

O *3
O *3
X
O
O *2
66
67
91
93
100, 101

Default
Changed

Basic
Channel

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Control
Change

X
X

1
1 - 16

Model Number: CDP-230R
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

O 0 - 127

O
X
O *2
O
O
X
O *3
0, 32
1
6, 38
7
10
11
64

0 - 127

Mode 3
X

Transmitted

Declaration of Conformity

O 9nH v = 1 - 127
X 9nH v = 0

The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that
purpose, locate the apparatus in a way that secures easy access to the power cord.

*1: Depends on tone.
*2: For details about NRPN, RPN, and system
exclusive messages, see MIDI Implementation at
http://world.casio.com/.
*3: In accordance with pedal effect setting.
*4: With this product, the Hall function is treated as one
type of reverb.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.

Remarks

O
O
X
O
O
X

X
X

X
X
X

O *2

O 0 - 127

O (MSB only)
O
O *2
O
O
O
O

X
O

0 - 127
0 - 127 *1

Mode 3
X

1 - 16
1 - 16

Recognized

13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.

O
O
O
O
O *2

O 9nH v = 1 - 127
X 9nH v = 0, 8nH v =**

Bank select
Modulation
Data entry
Volume
Pan
Expression
Hold 1

Remarks

Version : 1.0

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.

Sostenuto
Soft pedal
Reverb send *4
Chorus send
RPN LSB, MSB

IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.

CDP230R_e.book

1 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Important!
• Before using the AD-A12150LW Adaptor to power the product, be sure to check the AC Adaptor for any damage first. Carefully
check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is
seriously damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-A12150LW adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.

Declaration of Conformity According to EU Directive

This mark applies in EU countries only.

Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany

● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
● IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE
USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
● The contents of this manual are subject to change without notice.
● The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide.
● Company and product names used in this manual may be registered trademarks of others.

EN-1

English

Please note the following important information before using this product.

CDP230R_e.book

2 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Contents
General Guide ...........................EN-4

br
ck

Using the 10-key Pad ( ).............................. EN-7
FUNCTION Button ( ) Functions ................. EN-7
Returning the Digital Piano to
Its Factory Default Settings ............................. EN-8

Getting Ready to Play ..............EN-9
Preparing the Music Stand .............................. EN-9
Connecting a Pedal Unit.................................. EN-9
Power Supply .................................................. EN-9

Playing the Digital Piano........EN-10
Turning on Power and Playing ...................... EN-10
Using Headphones ........................................ EN-10
Changing Keyboard Response to
Touch Pressure (Touch Response)............... EN-11
Adjusting Display Contrast ............................ EN-11
Using the Metronome .................................... EN-12

Controlling the Keyboard
Sounds ....................................EN-13
Select from a variety of
musical instrument sounds ............................ EN-13
Layering Two Tones ...................................... EN-14
Splitting the Keyboard between
Two Different Tones ...................................... EN-14
Using Hall ...................................................... EN-15
Using Reverb................................................. EN-15
Using Chorus................................................. EN-15
Using a Pedal ................................................ EN-16
Changing the Pitch
(Transpose, Tuning, Octave Shift)................. EN-16
Using the Pitch Bend Wheel to
Shift the Pitch of Notes .................................. EN-17

Sampling Sounds and Playing
Them on the Digital Piano .....EN-18
Connection and Preparation.......................... EN-18
Sampling and Playing a Melody Sound
(Melody Sampling) ........................................ EN-19
Incorporating a Sampled Sound into
a Drum Set (Drum Sampling) ........................ EN-21
Other Sampling Functions ............................. EN-24

EN-2

Playing Built-in Songs........... EN-26
Playing the Demo Songs .............................. EN-26
Playing Back a Particular Song..................... EN-26
Increasing the Selection of Songs ................ EN-29

Using Built-in Songs to
Master Keyboard Play ........... EN-30
Phrases......................................................... EN-30
Step Up Lesson Flow.................................... EN-30
Selecting the Song, Phrase,
and Part You Want to Practice...................... EN-31
Lessons 1, 2, and 3....................................... EN-32
Lesson Settings ............................................ EN-33
Using Auto Step Up Lesson.......................... EN-35

Music Challenge
Keyboard Game ..................... EN-36
Using Auto
Accompaniment ..................... EN-37
Playing the Rhythm Part only........................ EN-37
Playing All Parts ............................................ EN-38
Using Auto Accompaniment Effectively ........ EN-40
Using One-Touch Preset .............................. EN-41
Using Auto Harmonize .................................. EN-42
Looking Up the Notes of Chords
(Chord Book)................................................. EN-43

Editing Auto Accompaniment
Patterns................................... EN-44
Saving Keyboard Setups to
Registration Memory ............. EN-47
To save a setup to registration memory........ EN-48
To recall a setup from
registration memory ...................................... EN-48

CDP230R_e.book

3 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Recording Your Keyboard
Play ..........................................EN-49

Connecting External
Devices ................................... EN-64

Recording and Playing Back
Keyboard Play ............................................... EN-49
Using Tracks to Record and Mix Parts .......... EN-50
Recording Two or More Songs,
and Selecting One for Playback .................... EN-52
Recording while Playing Along with
a Built-in Song ............................................... EN-52
Saving Recorded Data on
an External Device ........................................ EN-53

Connecting to a Computer ............................ EN-64
MIDI Settings ................................................ EN-65
Storing and Loading Digital Piano
Memory Data ................................................ EN-67
Connecting to Audio Equipment ................... EN-68

Reference................................ EN-69
Troubleshooting ............................................ EN-69
Specifications................................................ EN-71
Operating Precautions .................................. EN-72
Error Messages............................................. EN-73
Song List ....................................................... EN-74
Fingering Guide ............................................ EN-75

Other Useful Digital Piano
Functions ................................EN-54
Changing the Scale of the Keyboard............. EN-54
Using Music Preset ....................................... EN-55
Using the Arpeggiator.................................... EN-56
Deleting User Song Data............................... EN-57
Deleting All Data in Digital Piano Memory..... EN-57

MIDI Implementation Chart

Using a Memory Card.............EN-58
Memory Card and Card Slot Precautions...... EN-58
Inserting and Removing a Memory Card....... EN-59
Formatting a Memory Card............................ EN-59
Saving Digital Piano Data to
a Memory Card.............................................. EN-60
Loading Data from a Memory Card into
Digital Piano Memory .................................... EN-61
Deleting Data from a Memory Card............... EN-62
Playing Back Data from a Memory Card ....... EN-63
Memory Card Error Messages ...................... EN-63

Included Accessories

Separately Available Accessories

● Music Stand
● Pedal
● Song Book
● Leaflets
• Safety Precautions
• Appendix
• Other (Warranty, etc.)
Items included as accessories are subject to change without notice.

• You can get information about accessories that
are separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
http://world.casio.com/

EN-3

English

Contents

CDP230R_e.book

4 ページ

２０１４年２月１９日 水曜日 午後５時１１分

General Guide
• In this manual, the term “Digital Piano” refers to the CDP-230R.

• In this manual, buttons and other controllers are identified using the numbers shown below.

3 4 5 6 7 8

bk bl bm

bp bq

cl cm cn co cp cq

EN-4

bs bt ck

cr cs ct

CDP230R_e.book

5 ページ

２０１４年２月１９日 水曜日 午後５時１１分

General Guide
• The following explains the meaning of the $ symbol that appears on the product console and with the key names below.

1 VOLUME knob ☞EN-10
2 P (POWER) button ☞EN-10
3 INTRO, REPEAT button ☞EN-27, 40
4 NORMAL/FILL-IN, REW button ☞EN-27, 40
5 VARIATION/FILL-IN, FF button ☞EN-27, 40
6 SYNCHRO/ENDING, PAUSE button ☞EN-27, 41
7 START/STOP, PLAY/STOP button ☞EN-26, 37
8 ACCOMP, CHORDS $, PART SELECT button
☞EN-29, 38

9 TEMPO buttons ☞EN-12, 28, 41
bk RECORDER, SAMPLING $ button
☞EN-19, 49

bl RHYTHM EDITOR button ☞EN-44
bm METRONOME, BEAT $ button ☞EN-12
bn SONG BANK, $ button ☞EN-26
bo RHYTHM, ONE TOUCH PRESET $ button
☞EN-37, 41

bp TONE, MUSIC PRESET $ button ☞EN-13, 55
bq CARD, LOAD/SAVE $ button ☞EN-59
br Number buttons, [–]/[+] keys ☞EN-7

English

$ : Indicates a function that is enabled by holding down the button for some time. For example, METRONOME, BEAT $ means that the BEAT
function is enabled by holding down the button for some time.

bs HALL button ☞EN-15
bt PIANO/ORGAN, CHORD BOOK $ button
☞EN-13, 43

ck FUNCTION button ☞EN-7
cl BANK, LISTEN button ☞EN-32, 47
cm Area1, WATCH button ☞EN-32, 47
cn Area2, REMEMBER button ☞EN-33, 47
co Area3, NEXT button ☞EN-31, 47
cp Area4, AUTO button ☞EN-35, 47
cq STORE, MUSIC CHALLENGE button ☞EN-36, 48
cr SPLIT button ☞EN-14
cs LAYER, $ button ☞EN-14
ct AUTO HARMONIZE/ARPEGGIATOR,
TYPE $ button ☞EN-42, 56

dk Speakers
dl Display
dm PITCH BEND wheel ☞EN-17
dn CHORD root names ☞EN-38
do Percussion instrument list ☞EN-13

EN-5

CDP230R_e.book

6 ページ

２０１４年２月１９日 水曜日 午後５時１１分

General Guide

■ Back

dr ds

dp SD CARD SLOT ☞EN-59
dq USB port ☞EN-64
dr SUSTAIN/ASSIGNABLE JACK ☞EN-9
ds AUDIO IN jack ☞EN-68

EN-6

ek el em

dt DC 12V terminal ☞EN-9
ek PHONES/OUTPUT jack ☞EN-10, 68
el MIC IN/SAMPLING jack ☞EN-18
em MIC VOLUME knob ☞EN-18

CDP230R_e.book

7 ページ

２０１４年２月１９日 水曜日 午後５時１１分

General Guide

br)

Function

Use the number buttons and the [–] and [+] keys to change
the settings of the parameters that appear in the upper left
area of the display.

Setting

S t . G r Pn o
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Example : To enter tone number 001, input 0 3 0 3 1.

• Negative values cannot be input using the number buttons.
Use [–] (decrease) and [+] (increase) instead.

Trans.

Accompaniment Volume

AcompVol

EN-41

Song Volume

Song Vol

EN-28

Touch Response

Touch

EN-11

Tuning

Tune

EN-16

Reverb

EN-15

Chorus

EN-15

Sampling

SAMPLING

Automatic Sampling Start

AutoStrt

EN-24

Automatic Sampling Stop

AutoStop

EN-24

Sampled Tone Protect

(Protect)

EN-25

Step Up Lesson

LESSON

ck) Functions
ck

You can use the FUNCTION button ( ) to adjust the reverb
effect, to delete data, and to perform a wide range of other
Digital Piano operations.

To select a function

1. Press ck (FUNCTION) to display the function

EN-16

Voice Fingering Guide

Speak

EN-33

Note Guide

NoteGuid

EN-34

Performance Evaluation

Scoring

EN-34

Phrase Length

PhraseLn

EN-34

10 Preset Scales

SCALE

EN-54

11 Other Settings

OTHER

Arpeggiator Hold

ArpegHld

EN-56

Pedal Effect

Jack

EN-16

Pitch Bend Range

Bend Rng

EN-17

Accompaniment Scale

AcompScl

EN-55

Contrast

EN-11

12 MIDI Settings

You can use the [–] (decrease) and [+] (increase) keys to
change the displayed number or value.
• Holding down either key scrolls the displayed setting.
• Pressing both keys at the same time will revert to the initial
default setting or the recommended setting.

FUNCTION Button (

Transpose

LCD Contrast

[–] and [+] Keys

See
Page

Number Buttons

Display

MIDI

Keyboard Channel

Keybd Ch

EN-65

Navigate Channels

Navi. Ch

EN-65

Local Control

Local

EN-66

Accomp Out

AcompOut

EN-66

13 Delete

DELETE

Sampled Sound Delete

(tone name)

User Rhythm Delete

(rhythm name) EN-46

EN-25

User Song Delete

(song name)

EN-57

All Data Delete

All Data

EN-57

• The tone and other parameters revert to their initial
defaults whenever you turn on power (page EN-10).

menu.

2. Use the br (10-key) [4] (U) and [6] (I) keys to
display the function you want.

• You can exit the function menu by pressing
(FUNCTION).
• After selecting functions 8 through 13, press the
(10-key) [9] (ENTER) key to display the menu item’s
submenu. Then use [4] (U) and [6] (I) to select an
item. You can exit a submenu by pressing the
(10-key) [7] (EXIT) key.

3. Refer to the indicated pages for details about
each function.

EN-7

English

Using the 10-key Pad (

CDP230R_e.book

8 ページ

２０１４年２月１９日 水曜日 午後５時１１分

General Guide

Returning the Digital Piano to Its
Factory Default Settings
Perform the following procedure when you want to return the
Digital Piano’s stored data and settings to their initial factory
defaults.

1. Turn off the Digital Piano.
2. While holding down bn (SONG BANK) and the
[1] 10-key (

br) key at the same time, press 2.
br) key

• Keep
(SONG BANK) and the [1] 10-key (
depressed until the next step is complete.

3. When the message “Pls wait” appears on the

bn (SONG BANK) and the [1]

screen, release
10-key ( ) key.

• You will be able to use the Digital Piano in a short while
after its system is initialized.

• See “Turning on Power and Playing” (page EN-10) for
information about turning Digital Piano on and off.

EN-8

CDP230R_e.book

9 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Preparing the Music Stand

Music stand

Note the following important precautions to avoid
damage to the power cord.
During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or connector.
During Movement
• Before moving the Digital Piano, be sure to unplug the AC
adaptor from the power outlet.

Connecting a Pedal Unit

During Storage
• Loop and bundle the power cord, but never wind it around
the AC adaptor.

• Never connect the AC adaptor (JEITA Standard, with
unified polarity plug) that comes with this Digital Piano
to any other device besides this Digital Piano. Doing so
creates the risk of malfunction.
• Make sure the Digital Piano is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.

SUSTAIN/ASSIGNABLE JACK

Power Supply
Your Digital Piano runs on standard household power. Be
sure to turn off power whenever you are not using the Digital
Piano.

Using the AC Adaptor
Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this Digital Piano. Use of a
different type of AC adaptor can cause malfunction of the
Digital Piano.
Specified AC Adaptor: AD-A12150LW
• Use the supplied power cord to connect the AC adaptor as
shown in the illustration below.
Household power outlet

DC 12V terminal

Power cord
AC Adaptor
• Configuration and type depends
on your geographic location.

EN-9

English

Getting Ready to Play

CDP230R_e.book

10 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Playing the Digital Piano
1

Turning on Power and Playing

Auto Power Off
If you do not perform any operation for 30 minutes, the Digital
Piano will turn off automatically.

1. Press 2 (P).
This turns on power.
• To turn off the Digital Piano, press

2 again.

2. Try playing something on the keyboard. Use 1
to adjust volume.

■ Disabling Auto Power Off
You can disable Auto Power Off to ensure that power is not
turned off automatically during a concert, etc.

1. While holding down bp (TONE), turn on power.
Auto Power Off will be disabled.

Using Headphones

• If you press
only lightly, the display will light up
momentarily but power will not turn on. This does not
indicate malfunction. Press
firmly and completely
to turn on power.
• Turning off the Digital Piano causes most current
settings to be cleared. The Digital Piano will revert to
initial settings the next time you turn it on.
This is true for all settings except for sample sound
protection. Once you turn it on it remains on until you
turn it off again.
• The message “Pls wait” will remain on the display
while a data save operation is in progress. Do not
perform any other operation while it is displayed.
Turning off the Digital Piano or removing the memory
card can cause Digital Piano data to be deleted or
become corrupted.
• Pressing
to turn off power actually puts the Digital
Piano into a standby state. Minute amounts of current
continue to flow within the Digital Piano in the standby
state. If you do not plan to use the Digital Piano for a
long time or if there is a lightning storm in your area, be
sure to unplug the AC adaptor from the power outlet.

Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.

PHONES/OUTPUT jack

• Headphones do not come with the Digital Piano.
• Use commercially available headphones. See page EN-3
for information about options.

EN-10

• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.

CDP230R_e.book

11 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Playing the Digital Piano

Touch Response alters tone volume in accordance with
keyboard pressure (speed). This provides you some of the
same expressivity you get on an acoustic piano.

Changing Touch Response Sensitivity
Use the procedure below to control how much the volume of
played notes change in accordance with playing speed.
Select the setting that best matches your playing style.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“Touch” (page EN-7).

To u c h

Pressing fast produces
louder notes.

2. Use br (10-key) [–] and [+] keys to select one of
the four Touch Response sensitivity settings.
Off (oFF)

Touch Response is turned off. Sound
volume is fixed, regardless of key press
speed.

Type 1 (1)

Normal Touch Response

Type 2 (2)

More sensitive Touch Response than Type 1

Type 3 (3)

Less sensitive Touch Response than Type 1

Pressing slowly produces
softer notes.

Do not try to use too much
pressure.

Adjusting Display Contrast
1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“OTHER” (page EN-7).
Flashes

OTHER
2. Press br (10-key) [9] (ENTER) key.
3. Use the br (10-key) [4] (U) and [6] (I) keys to
display “Contrast”.

Co n t r a s t
4. Use the br (10-key) [–] and [+] keys to adjust
the contrast.
• The contrast setting range is 01 to 17.

EN-11

English

Changing Keyboard Response to
Touch Pressure
(Touch Response)

CDP230R_e.book

12 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Playing the Digital Piano

Using the Metronome
The metronome lets you play and practice along with a steady
beat to help keep you on tempo.

Changing the Metronome Tempo
Use the following procedure to change the tempo of the
metronome.

1. Press 9.

Start/Stop

1. Press bm.
This starts the metronome.
This pattern changes with each beat.

Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing q and w at the same time will initialize the
tempo setting in accordance with the currently selected
song or rhythm.
• Pressing
causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
(10-key) to change it.
Note that you must input leading zeros, so 89 is input
as 089.
• The tempo value will stop flashing if you do not perform
any operation for a short while.

2. Press bm again to stop the metronome.
Changing the Beats per Measure
You can configure the metronome to use a bell sound for the
first beat of each measure of the song you are playing.
• You can specify 0, or a value from 1 to 9 as the number of
beat per measure.
• When playing a built-in song, the beats per measure setting
(which determines when the bell sounds) is configured
automatically for the currently selected song.

1. Hold down bm until the beats per measure
setting screen appears on the display.

Be a t
• If you do not perform any operation for a few seconds
after the beats per measure setting screen appears, the
display will return to the screen displayed before you
pressed
.

2. Use br (10-key) to enter the number of beats
per measure.
• The bell will not sound if you specify 0 for this setting. In
this case, all beats are indicated by a click sound. This
setting lets you practice with a steady beat, without
worrying how many beats there are in each measure.

EN-12

Tempo value (flashes)

Changing the Metronome Sound Volume
The metronome volume setting is changed automatically with
the volume level of the currently selected Auto
Accompaniment or song. The metronome volume cannot be
adjusted independently.
• For information about changing the Auto Accompaniment
volume, see page EN-41.
• For information about changing the song volume, see page
EN-28.

• You cannot adjust the balance between the metronome
and note volume during Auto Accompaniment and built-in
tune play.

CDP230R_e.book

13 ページ

２０１４年２月１９日 水曜日 午後５時１１分

bs bt ck

cr cs

Select from a variety of musical
instrument sounds

3. Try playing something on the keyboard.
The tone of the instrument you selected will sound.

Your Digital Piano lets you select tones for a wide variety of
musical instrument sounds, including violin, flute, orchestra,
and more. Even the same song sound takes on a different feel
by changing the instrument type.

To select an instrument for playing

1. Press bp (TONE).
Tone number

Tone name

Playing with a Piano or Organ Tone

S t . G r Pn o
2. Use br (10-key) to select the tone number you
want.
The corresponding tone number and tone name will
appear on the screen.
• Use the number buttons to enter the tone number.
Specify three digits for the tone number.
Example : To select 001, enter 0 3 0 3 1.

• See the separate “Appendix” for a complete list of available
tones.
• When one of the drum sets is selected (tone numbers 684
through 700), each keyboard key is assigned a different
percussion sound.

Pressing
toggles between the piano and organ modes.
Each press of
toggles the tone setting between a piano
tone (Tone Number 001) and an organ tone (Tone Number
089).

In addition to the tone number, you also can configure the
settings listed below.
Hall
Reverb
Transpose
Touch Response

: Off
: “06”
: “00”
: Off: Returns to initial default
On: No change
Pedal Effect
: SUS
Rhythm Number
: “181” (When a piano tone is selected)
“108” (When an organ tone is selected)
Accompaniment
: Rhythm part only
Local Control
: On
Drum Assign
: Off
Split
: Off
Layer
: Off
Chorus
: Off
Octave Shift (Upper) : “0”
Auto Harmonize
: Off
Arppegiator
: Off
Scale
: Equal

EN-13

English

Controlling the Keyboard Sounds

CDP230R_e.book

14 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Controlling the Keyboard Sounds

Layering Two Tones
You can use the following procedure to layer two different
tones (such as piano and strings) so they sound
simultaneously when you press a keyboard key.

1. Select the first tone you want to use.

Press
(TONE) and then use
tone you want.
Example: 038 ELEC.PIANO 1

br (10-key) to select the

Splitting the Keyboard between
Two Different Tones
You can use the procedure below to assign different tones to
the right range and left range of the keyboard, so it sounds
like you are playing an ensemble between two instruments.

To select the two tones for a split keyboard

1. Select the tone for the right side range (page
EN-13).

E . P i a n o 1

Press
(TONE) and then use
tone you want.
Example: 365 FLUTE 1

br (10-key) to select the

2. Press cs.

F l u t e

2. Press cr.

Lights

3. Use br (10-key) to select the second tone you
want.
Example: 238 STRINGS 1

Lights

3. Use br (10-key) to select the left side range

S t r i n

s 1

tone you want.
Example: 074 VIBRAPHONE 1

4. Play something on the keyboard.
Both tones sound at the same time.

5. Pressing cs again to unlayer the keyboard (so
it plays only the tone you selected in step 1).

• Each press of
toggles between layered (two tones)
and unlayered (one tone).

V i b e s
4. Play something on the keyboard.

This will sound the tones assigned to the left and right
side ranges of the keyboard.
VIBRAPHONE 1
Split point

EN-14

FLUTE 1

CDP230R_e.book

15 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Controlling the Keyboard Sounds

plays only the tone you selected in step 1).

• Each press of
toggles between split (two tones) and
unsplit (one tone).

Using Reverb
Reverb adds reverberation to notes. You can change the
duration of the reverb.

1. Press ck (FUNCTION) and then use the br
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.

(10-key) [4] (U) and [6] (I) keys to display
“Reverb” (page EN-7).

To change the split point

Re v e r b

1. While holding down cr, press the keyboard key
where you want the split point to be.
The key you press will become the lowest note of the right
side range of the split keyboard.
Example: Setting middle C (C4) as the split point.
Key name

2. Use the br (10-key) [–] and [+] keys to select
the reverb setting you want.
Off (oFF)

Turns off reverb.

1 to 10

The larger the number selected, the longer
the reverb duration.

C4
Using Hall
The Hall function lets you instantly configure the Digital Piano
to play with the acoustic effect of a classic concert hall.

1. Press bs (HALL) to turn on the Hall function.

Indicator disappears when reverb is turned off.

• Changing the reverb setting (including turning it off) while
the Hall function is turned on will turn off the Hall function.

Using Chorus
Chorus is a function that adds depth and breadth to notes. It
makes you sound as if you are playing multiple instruments.
Lights

2. To turn off the Hall function, press bs again.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“Chorus” (page EN-7).

Ch o r u s
The indicator will disappear when the Hall function is turned off.

• The reverb setting turns off automatically whenever the
Hall function is turned on. When you turn off the Hall
function, the reverb setting will return to whatever it was
before you turned on the Hall function.

2. Use the br (10-key) [–] and [+] keys to select
the chorus type you want.
There are five chorus types, plus an off setting.

Indicator disappears when chorus is turned off.

• The actual effect produced by chorus depends on the tone
you are using.

EN-15

English

5. Pressing cr again to unsplit the keyboard (so it

CDP230R_e.book

16 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Controlling the Keyboard Sounds

Using a Pedal
A pedal can be used to change notes in various ways while
playing.

Selecting the Pedal Effect

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“OTHER” (page EN-7).

Changing the Pitch
(Transpose, Tuning, Octave Shift)
Changing the Pitch in Semitone Steps
(Transpose)
The transpose feature lets you change the pitch, in semitone
steps. A simple operation lets you instantly change the pitch
to match that of a singer.
• The transpose setting range is –12 to +12 semitones.

Flashes

1. Press ck (FUNCTION).

OTHER
2. Press br (10-key) [9] (ENTER) key.
3. Use the br (10-key) [4] (U) and [6] (I) keys to

T r a n s .
2. Use the br (10-key) [–] and [+] keys to select
the transpose setting you want.

display “Jack”.

Fine Tuning (Tuning)

J a c k
4. Use the br (10-key) [–] and [+] keys to select
the pedal effect you want.
• The following shows the available pedal effects.
Sustain
(SUS)

Sustains notes played while the pedal is
depressed. Organ and other similar tone
notes are sustained even if the pedal is not
pressed.

Sostenuto
(SoS)

Sustains notes that are playing when the
pedal is depressed before the keyboard
keys are released.

Soft
(SFt)

Slightly softens notes played while the pedal
is depressed.

Rhythm
(rHy)

Pressing the pedal starts and stops Auto
Accompaniment or song playback.

Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
You can use the tuning feature to adjust tuning so it exactly
matches a performance on a CD.
• The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to
465.9 Hz. The initial default setting is 440.0 Hz.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“Tune” (page EN-7).

Tu n e
2. Use the br (10-key) [–] and [+] keys to adjust
the tuning.
• Performing this step causes the display to change from
“Tune” to a value that indicates the current frequency
setting as shown below. You can change the frequency
in 0.1 Hz steps.

4 4 0 . 0Hz
br

• Even if you do not perform a
(10-key) operation to
adjust the tuning, the current frequency setting will
appear automatically after a few seconds.

EN-16

CDP230R_e.book

17 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Octave Shift
Octave Shift lets you raise or lower the pitch of the keyboard
notes in octave units.
• The octave shift setting range is –2 to +2 octaves.
• When using Split (page EN-14), you can individually set the
left and right keyboard ranges to the pitches you want.

1. Keep pressing cs until the screen shown below

Using the Pitch Bend Wheel to
Shift the Pitch of Notes
You can use the pitch bend wheel to slide the pitch of notes
smoothly upwards and downwards. This technique makes it
possible to produce effects that are similar to sounds
produced when bending notes on a saxophone or electric
guitar.

appears on the display.

If you want to use Split, turn on Split before pressing
.
• If you do not perform any operation for a few seconds
after this screen appears, the display will return to the
previous screen automatically.

Oc t U

p p

e r

2. Use the br (10-key) [–] and [+] keys to shift the
octave.
• Split On : This step affects the right side keyboard
range only.
• Split Off : This step affects the entire keyboard range.

3. Press cs.

• Split On : The screen shown below will appear. Use the
(10-key) [–] and [+] keys to shift the
octave for the left side keyboard range.
• Split Off : The screen shown below will appear.
Advance to step 4.

To play with the pitch bend wheel

1. While playing a note on the
keyboard, rotate the pitch bend
wheel on the left of the keyboard
upwards or downwards.
The amount the note bends depends on how
much you rotate the pitch bend wheel.
• Do not have the pitch bend wheel rotated
as you turn on the Digital Piano.

Specifying the Pitch Bend Range
Use the following procedure to specify how much the pitch of
the note changes whenever the pitch bend wheel is rotated
upwards or downwards. You can specify a range from 0 to 12
semitones (one octave).

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“OTHER” (page EN-7).
Flashes

Oc t L owe r

OTHER

4. Press cs again.
2. Press br (10-key) [9] (ENTER) key.
3. Use the br (10-key) [4] (U) and [6] (I) keys to
display “Bend Rng”.

Be n d

4. Use the br (10-key) [–] and [+] keys to change
the range.

EN-17

English

Controlling the Keyboard Sounds

CDP230R_e.book

18 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Sampling Sounds and Playing Them on the Digital
Piano
bo bp

bk
You can use the Digital Piano to sample a sound from a
microphone, and then play the sound with keyboard keys. For
example, you could sample the bark of your dog and then use
the sound in a melody. The sampling feature is a great way to
create new sounds that are highly creative.

Connection and Preparation

bt ck

cl cm cn co cp cq
2. Turn the volume levels of the Digital Piano
down.

3. Turn on the microphone and then the Digital
Piano.

4. Use em (MIC VOLUME) to adjust the volume
level of microphone input.

• Turn off the microphone and the Digital Piano before
connecting them.

1. Connect a microphone.

MIC IN/SAMPLING jack

• Use a commercially available dynamic microphone.
• You cannot sample sounds input from through the AUDIO
IN jack.

EN-18

• It will take a few seconds after you turn on the Digital Piano
before you will be able to use the microphone.
• Sampled sounds are recorded in monaural.

CDP230R_e.book

19 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Sampling Sounds and Playing Them on the Digital Piano

Use the procedures in this section to sample a sound and play
it as the melody part on the Digital Piano.
• Up to five sampled sounds can be stored in Digital Piano
memory as tone numbers 701 through 705. Simply select
the tone number where the sound you want is located to
assign the sound to the keyboard.

To sample a sound

1. Press bp (TONE) and then use br (10-key) to
enter the tone number (701 to 705) where you
want to store the sampled sound.
No sampled sound stored

Da t a

3. Output the sound in the direction of the
microphone.
Sampling will start automatically.
• Sampling will not start if the volume of the sound picked
up by the microphone is too low.

Sam

l i n

4. After the sound you want to sample is finished,
press

bk.

Sampling will stop.
• Even if you do not press
, sampling will stop
automatically whenever there is no more sound being
input from the microphone. Sampling also will stop
automatically 10 seconds after it is started.

S1 : O r

n l

Sampled sound 1
Lights

2. Hold down bk until the display changes to the

Used memory
(Unit: Kbytes)

Remaining
memory capacity

screen shown below.
This enters sampling standby.
The allowable sampling time (in seconds) will appear on
the display momentarily and then the display will change
to the following.

Wa i t i n

Flashes

5. Play something on the Digital Piano.
• You may not be able to get 10 seconds of sampling if
Digital Piano memory is low due to storage of other data. If
this happens, deleting other memory data you no longer
need will free up memory space and you should be able to
sample for 10 seconds. See “Deleting a Sampled Sound”
on page EN-25 for more information.

• Sampling sound and storing it will delete any sound
data currently stored under the same tone number. To
help ensure that you do not accidentally delete
important data, be sure to read “Protecting Against
Accidental Deletion of Sampled Sounds” on page
EN-25.

EN-19

English

Sampling and Playing a Melody
Sound (Melody Sampling)

CDP230R_e.book

20 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Sampling Sounds and Playing Them on the Digital Piano
■ How sampled sounds are played
Pressing Middle C (C4) will play back the original sound. The
keys to the left and right of C4 play the sound at different
pitches.

Changing the Volume of Sampled Sound
Looped Playback
You can use the following procedure to change the volume
level of the looped playback of each sampled sound, if you
want.

1. Press the button of the sampled sound whose

cm to cq).

volume you want to change (
C4

• This will cause the sounds loop to sound.

2. While the loop is sounding hold down the same

Looping a Sampled Sound
You can use the following procedure to loop a sampled sound
so it continues to repeat, as you play on the Digital Piano.

1. Press bo (RHYTHM).
2. Press bt and ck (FUNCTION) at the same time.
This enters repeat standby.

n t hPo

the melody sampling tone number you want to
select.
This will start looped playback of the selected sound.
To select this tone number:

Press this button:

701

cm
cn
co
cp
cq

704
705

4. Press the same button again to stop playback.
5. Press cl to return to the screen that was
displayed before step 2 of this procedure.

EN-20

• Pressing the keyboard key quickly will increase sample
sound volume, while pressing slowly will decrease
volume.

3. After the sampled sound is at the volume level

cm to cq).

3. Press the button (cm to cq) that corresponds to

703

cm to cq) as you press

you want, release its button (

Lights

702

sampled sound button (
any keyboard key.

CDP230R_e.book

21 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Applying Effects to a Sampled Sound
You can apply various effects to sampled sounds.

1. Press bp (TONE) and then use br (10-key) to
enter the tone number (701 to 705) to which you
want to apply effects.

2. Press bp (TONE) to cycle through the available
effects, described below.
Effect Type
(Display)
Original (Orgnl)

Description
Normal sampled tone (no looping, no
effect).

Loop 1 (Loop1)

Loops the sampled sound.

Loop 2 (Loop2)

Loops the sample sound and raises the
pitch of the resonating sound when the
keyboard key is released.

Loop 3 (Loop3)

Loops the sample sound and lowers the
pitch of the resonating sound when the
keyboard key is released.

Pitch 1 (Ptch1)

Changes the pitch from low to high, at an
increasing rate.

Pitch 2 (Ptch2)

Changes the pitch from high to low, at a
decreasing rate.

Pitch 3 (Ptch3)

Changes the pitch from high to low, at a
decreasing rate, and then raises the pitch
when the key is released.

Incorporating a Sampled Sound
into a Drum Set (Drum Sampling)
You can use the procedure to change the drum sounds that
are assigned to each keyboard key.
• You can store up to three drum sets and store them as tone
numbers 706, 707, and 708. Simply select the tone number
where the drum set you want is located to assign the drum
set sounds to the keyboard.

1. Press bo (RHYTHM).
2. Press bp (TONE) and then use br (10-key) to
enter the tone number (706, 707, or 708) for the
drum set whose sounds you want to change.

Da t a
Lights

3. Hold down bk until the display changes to the
screen shown below.

Tremolo (Treml) Alternates volume between high and low.
Funny 1 (Funy1)

Adds vibrato and changes the pitch by a
gradually increasing amount.

Da t a

Alternates between high pitch and low
Funny 2 (Funy2)
pitch.
Funny 3 (Funy3)

Adds vibrato and changes the pitch from
low to high.

Flashes

• Avoid assigning the same sampled sound (tone number
701 to 705) to the keyboard for play along and for looped
play. Doing so will cause, the Loop 1 effect to be applied to
the keyboard tone while looped play of the sampled sound
is being performed.

EN-21

English

Sampling Sounds and Playing Them on the Digital Piano

CDP230R_e.book

22 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Sampling Sounds and Playing Them on the Digital Piano

4. Press the keyboard key* to which you want to
assign the drum sound you are about to
sample.
This enters sampling standby.
The allowable sampling time (in seconds) will appear on
the display momentarily and then the display will change
to the following.

Wa i t i n

6. After the sound you want to sample is finished,
press

bk.

l D r m1

Used memory
(Unit: Kbytes)

Remaining memory
capacity

g
Sampling will stop.
• Even if you do not press
, sampling will stop
automatically whenever there is no more sound being
input from the microphone. Sampling also will stop
automatically 10 seconds after it is started.

Flashes

7. Press the keyboard key.

* Drum sounds cannot be assigned to these keys.

5. Output the sound in the direction of the
microphone.
Sampling will start automatically.
• Sampling will not start if the volume of the sound picked
up by the microphone is too low.

Sam

EN-22

l i n

• You can repeat steps 3 through 6 to change other sounds
that make up the currently selected drum set. There are
eight sounds per drum set.
• You may not be able to get 10 seconds of sampling if
Digital Piano memory is low due to storage of other data. If
this happens, deleting other memory data you no longer
need will free up memory space and you should be able to
sample for 10 seconds. See “Deleting a Sampled Sound”
on page EN-25 for more information.

• Sampling a sound will delete any sound data currently
assigned to the same keyboard key. To help ensure
that you do not accidentally delete important data, be
sure to read “Protecting Against Accidental Deletion of
Sampled Sounds” on page EN-25.

CDP230R_e.book

23 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Sampling Sounds and Playing Them on the Digital Piano

You can use the procedures in this section to copy the drum
sound assigned to one keyboard key to another key, to
change the pitch of a sound, and to delete a sampled sound.

1. Press bp (TONE) and then use br (10-key) to
enter the tone number (706, 707, or 708) for the
drum set you want.

2. Hold down bk until the SAMPLING indicator
starts to flash.

■ To change the pitch of a sampled sound
While holding down the keyboard key of the sampled sound
whose pitch you want to change, use the
(10-key) [–] and
[+] keys to change the pitch.
• You can change the pitch within a range of –64 to 63
semitones.

■ To delete a keyboard key’s sampled sound
While holding down the keyboard key whose sound you want
to delete, press
(RHYTHM). In response to the “DelSure?”
message that appears, press the
(10-key) [+] (YES) key to
delete, or [–] (NO) to cancel the delete operation.
• Deleting a sampled sound will return the key to its initial
default built-in sound.
Example: To delete the sound assigned to key D3

Flashes

Disappears

3. Press ck (FUNCTION).

l D r m1
Flashes at high
speed

This is the editing mode.
• While in the editing mode, you can copy a sound,
change the pitch of a sound, or delete a sound (each of
which is described below). Pressing
(FUNCTION)
again exits the editing mode and returns to step 2 of
this procedure.

Using a Drum Sampling Tone in Auto
Accompaniment (Drum Assign)
Use the following procedure to change the rhythm part of an
Auto Accompaniment pattern to a drum set sound that you
sampled.

1. Press bo (RHYTHM) and then use br (10-key)
to enter the rhythm number of the Auto
Accompaniment pattern you want.
You cannot use a Drum Sampling Tone in a user rhythm,
so do not select a user rhythm in the above step.

2. Press bp (TONE) and then use br (10-key) to
enter the tone number of the sampling drum set
that contains the sound you want to use.

3. Press bp (TONE).
Indicates keyboard keys that have sounds assigned.

■ To copy a sampled sound from one key to
another
While holding down the keyboard key to which the sampled
sound you want to copy is assigned, press the keyboard key
to which you want to copy it.

This changes the rhythm part of the Auto Accompaniment
pattern you selected in step 1 to the sampled sound you
selected in step 2.
• To change the Auto Accompaniment rhythm part back
to its original sound, press
(TONE) again.

• Some rhythm part drum sounds cannot be replaced by
sampled sounds.

Example: To copy sampled sound of key C3 to key D3

Indicates the keyboard key whose sound was copied.

• A keyboard key that already has a sampled sound assigned
cannot be selected as a copy destination.

EN-23

English

Editing Sampled Drum Set Sounds

CDP230R_e.book

24 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Sampling Sounds and Playing Them on the Digital Piano

Other Sampling Functions
Changing to a Manual Sampling Start
Normally when the Digital Piano is in sampling standby, it will
start sampling automatically whenever it detects sound input.
You can use the following procedure to enable manual
sampling start, which will cause sampling to wait until you
press a button to start it. You can use this to insert silence
before the sampled sound.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“SAMPLING” (page EN-7).
Flashes

Changing to Manual Sampling Stop
Normally the Digital Piano will stop sampling automatically
whenever it detects there is no sound input. You can use the
following procedure to enable manual sampling stop, which
will cause sampling to continue until you press a button to
stop it. You can use this to insert silence after the sampled
sound.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“SAMPLING” (page EN-7).

2. Press the br (10-key) [9] (ENTER) key.
3. Press the br (10-key) [6] (I) key.

SAMP L I NG
2. Press the br (10-key) [9] (ENTER) key.

Au t oS t o

4. Press the br (10-key) [–] key to turn off
automatic sampling stop.

Au t oS t r t
3. Press the br (10-key) [–] key to turn off
automatic sampling start.

Sampling continues until you perform one of the
operations below, even if nothing is being input from the
microphone.
• Melody sampling (page EN-19)
Press
.
• Drum sampling (page EN-21)
Press
.

bk
bk

This enables manual sampling start, which operates as
described below.
• Melody sampling (page EN-19):
Sampling starts when you hold down
in step 2 of
the sampling procedure to enter sampling standby, and
then press
again.
• Drum sampling (page EN-21):
Sampling starts when you press a keyboard key in step
4 of the sampling procedure to enter sampling standby,
and then press
.

EN-24

CDP230R_e.book

25 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Sampling Sounds and Playing Them on the Digital Piano

You can use the following procedure to specify a sampled
tone number and delete its data.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“DELETE” (page EN-7).
Flashes

Protecting Against Accidental Deletion of
Sampled Sounds
You can use the following procedure to protect each sampled
sound against accidental deletion.

1. Press bp (TONE) and then use br (10-key) to
enter the tone number of the sampled tone you
want to protect.

2. Press ck (FUNCTION) and then use the br

DELETE

(10-key) [4] (U) and [6] (I) keys to display
“SAMPLING” (page EN-7).

2. Press the br (10-key) [9] (ENTER) key.

3. Press the br (10-key) [9] (ENTER) key.
4. Use the br (10-key) [4] (U) and [6] (I) keys to
display “Protect”.

S1 : O r
Used memory
(Unit: Kbytes)

n l

Remaining
memory capacity

P r o t e c t
5. Press the br (10-key) [+] key to turn on
protection.

3. Use the br (10-key) [–] and [+] keys to select

Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.

the tone number of the data you want to delete.

4. Press the br (10-key) [9] (ENTER) key.
This displays a delete confirmation message.

Su r e ?

* 1 : O r

n l

Protected

■ Saving Sample Data on an External Device

5. Press the br (10-key) [+] (YES) key to delete the
data, or [–] (NO) or [7] (EXIT) to cancel the
delete operation.

• Memory card (page EN-60)
• Computer (page EN-67)

• After the delete procedure is complete, “Complete” will
appear on the display followed by the screen in step 1
of the above procedure.

• For information about deleting individual drum sounds
in a drum sampling set, see “Editing Sampled Drum Set
Sounds” on page EN-23.

EN-25

English

Deleting a Sampled Sound

CDP230R_e.book

26 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Playing Built-in Songs
bn

345678

• In addition to simple listening enjoyment, the built-in songs
can be used with the lesson system (page EN-30) for
practice.
• You can increase the number of tunes using your memory
cards (page EN-61) or computer (page EN-67).

• If Auto Power Off (page EN-10) is enabled, the Digital
Piano will turn off if 30 minutes (six minutes under battery
power) elapse without any keyboard operation being
performed. Use the procedure under “Disabling Auto Power
Off” (page EN-10) for information about how to disable Auto
Power Off.

Playing Back a Particular Song
Use the procedure below to play back one of the built-in
songs. You can play along on the keyboard with song
playback.

Playing the Demo Songs
Use the following procedure to play back built-in songs.

1. Press 7 and 8 at the same time.

Start/Stop

This will start playback of the demo songs.
• See page EN-74 for information about song numbers
and the song sequence.
• Demo playback always starts from song number 151.
Song number

With this Digital Piano, built-in tune data is referred to as
“songs”. You can listen to the built-in songs for your own
enjoyment, or you can play along with them for practice.

Flashes

1. Press bn (SONG BANK).
Lights

Song number

Tune name

Tw i n k l e

Demo T u n e

2. Use br (10-key) to enter the number of the song
you want.

2. To change to another song while demo

playback is in progress, use
(10-key) [–] and
[+] keys to enter the song number you want
(page EN-7).
This will cause demo playback to jump to the song whose
number you entered.
• You cannot use
(10-key) number buttons to select a
song.

3. To stop demo playback, press 7.
Demo playback continues until you stop it by pressing

EN-26

• See page EN-74 for a complete list of available songs.
• Use the number buttons to enter the song number.
Specify three digits for the song number.
Example : To select 001, enter 0 3 0 3 1.

CDP230R_e.book

27 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Playing Built-in Songs

3. Press 7.
Beat

Note

Key

Sustain pedal

1. Press 4.
This skips song playback back to the previous measure.
Each press of
skips back one measure. Holding down
skips back at high speed until you release it.
• Pressing
while song playback is stopped performs
lesson function phrase skip back (page EN-31).

Repeating Playback of Specific Measures

Tempo

You can use the procedure in this section to repeat particular
measures for practice playing along until you master it. You
can specify the start measure and the end measure of the
section you want to play and practice.

Fingering
Measure

Start

4. Press 7 again to stop playback.

End

7 to

Song playback will continue (repeat) until you press
stop it. You can cancel song repeat by pressing
.

These measures are repeated.
Indicator disappears
when song repeat is
turned off.

1. Press 3 to temporarily turn off song repeat.
Disappears

Pause, Skip Forward, Skip Back
Use the operations in this section to perform pause, skip
forward, and skip back operations.

2. When song playback reaches the measure you

■ Pause

want to specify as the start measure, press

1. Press 6.

This specifies the measure as the start measure.

This pauses song playback.

Flashes

2. Press 6 again to resume playback from the
point where you paused it.
■ Skip Forward

1. Press 5.
This skips song playback forward to the next measure.
Each press of
skips ahead one measure. Holding
down
skips forward at high speed until you release it.
• Pressing
while song playback is stopped performs
lesson function phrase skip forward (page EN-31).

Measure number

EN-27

English

■ Skip Back

This starts playback of the song.

CDP230R_e.book

28 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Playing Built-in Songs

3. When playback reaches the measure you want
to select as the end measure, press

3 again.

This specifies the measure as the end measure and starts
repeat playback of the measures in the specified range.
• During repeat play you can use
to pause playback,
to skip forward, or
to skip back.

Lights

Adjusting the Song Volume
Use the following procedure to adjust the balance between
the volume of what you play on the keyboard and song
playback volume.

1. Press ck (FUNCTION) and then use the br (10key) [4] (U) and [6] (I) keys to display “Song
Vol” (page EN-7).

So n

Vo l

2. Use the br (10-key) [–] and [+] keys to adjust
the song volume.

4. Pressing 3 again returns to normal playback.
Changing the song number clears the start measure and
end measure of the repeat operation.
Disappears

Playing with the Tone as Song Playback
The procedure below lets you select the same keyboard tone
as the one being used in the song and play along with your
favorite tunes.

1. After selecting a song, hold down bn (SONG
BANK) for about two seconds until the
displayed tone name changes to the tone name
of the song.
• If your currently selected tone is the same as the song
tone, the display contents will not change.

Changing Playback Speed (Tempo)
You can use the following procedure to change the speed
(tempo) in order to slow down playback to practice difficult
passages, etc.

1. Press 9.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing w and q at the same time will return the
current song to its original default tempo.
• Pressing
causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
(10-key) to change it. The tempo value will stop
flashing if you do not perform any operation for a short
while.
• Changing the song number will return the song to its
original default tempo.

EN-28

2. Play along with song playback.
• If you select a song that uses different tones for left and
right hand play, the right hand part tone is assigned to the
keyboard.

CDP230R_e.book

29 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Playing Built-in Songs

You can turn off the right hand part or the left hand part of a
song during playback and practice playing along with the
remaining part.

1. Press 8 to select the part you want to turn off.
Each press of
below.

Increasing the Selection of Songs
You can load song data from an external device and increase
the selection of songs available on the keyboard. See the
following pages for more information.
• Memory card (page EN-61)
• Computer (page EN-67)

8 cycles through the settings shown

• For information about how to delete song data loaded from
an external device, see page EN-57.
Right hand part off

Left hand part off

Both hand parts off

Both hand parts on

2. Press 7.
This starts playback in accordance with the setting you
selected in step 1.

• During playback with one part turned off, only the notes of
the part that is turned off are shown on the display.

EN-29

English

Turning Off the Part of One Hand for Practice
(Part Select)

CDP230R_e.book

30 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Built-in Songs to Master Keyboard Play
bn

345

cl cm cn co cp

To master a song, it is best to break it up into shorter parts
(phrases), master the phrases, and then put everything
together. Your Digital Piano comes with a Step Up Lesson
feature that helps you to do just that.

Phrases
The built-in songs are pre-divided into phrases to help you
master keyboard play.
Song start

Step Up Lesson Flow
Step Up Lesson takes you through practice of the right hand
part, left hand part, and both hand parts for each phrase of a
song. Master all of the phrases and you master the song.
Phrase 1
• Right Hand Lesson 1, 2, 3
• Left Hand Lesson 1, 2, 3
• Both Hand Lesson 1, 2, 3

Song end

4
Phrase 1

Phrase 2

Phrase 3

. . . .

Final
Phrase

Repeat the above to practice phrase
2, 3, 4, and so on, until you reach the
final phrase of the song.

4
After mastering all of the phrases,
practice the entire song.

4
Now you have mastered the entire
song!

EN-30

CDP230R_e.book

31 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Built-in Songs to Master Keyboard Play

The following are the messages that appear on the display
during Step Lessons.
Message

Description
Appears when you select a phrase, when a
lesson starts, etc.
• Note that certain phrases will cause
“” to appear instead of “”.

2. Press co (or 5) to move forward one phrase,
or

4 to move back one phrase.
5 4

• Holding down
or
scrolls through phrases at high
speed.
• The Digital Piano remembers the last phrase you
practiced for up to 20 songs. To recall the last practice
phrase for the current song (if it is available), hold down
.

Phrase number

Appears when the lesson starts with an intro
or fill-in phrase that is not included in the
phrases to be practiced. Play toll advance
automatically to the next phrase after the unincluded phrase plays, so wait until then to
start playing on the keyboard.

NextPhrs

Appears when advancing automatically to the
next phrase. This message appears following
a phrase for which “” (see above) is
displayed, and during an Auto Step Up Lesson
(page EN-35).

Listen
Watch
Remember

Appears at the start of Auto Step Up lesson 1,
2, or 3 (page EN-35).

From top

This message appears during Auto Step Up
Lesson (page EN-35) immediately before
practice from Phrase 1 up until the phrase
currently being practiced.

Complete

Appears at the end of Auto Step Up Lesson
(page EN-35).

First measure of the selected phrase

3. Press 8 to select the part you want to practice.
Each press of
shown below.

8 cycles through the settings
Right hand practice

Selecting the Song, Phrase, and
Part You Want to Practice

Left hand practice

First, select the song, phrase, and part you want to practice.

1. Select the song you want to practice (page
Both hand practice

EN-26).
This will select the first phrase of the song.

*
* This indicator (setting) is skipped if you press
a lesson is in progress.

8 while

4. Hold down bn (SONG BANK) for about two
seconds.
The same tone used for song playback will be assigned to
the keyboard (page EN-28).

EN-31

English

Messages that Appear during Lessons

CDP230R_e.book

32 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Built-in Songs to Master Keyboard Play

Lessons 1, 2, and 3
Now it is time to start the lessons. First, select the song and
part you want to practice.

Master playing the correct note with the correct finger
as instructed by the guidance. Practice playing with the
correct timing.

Lesson 1: Listen to the song.
First, listen to the example a few times to familiarize yourself
with what it sounds like.

1. Press cl.
This starts example play.

4
Song playback will wait for you to play the correct note.
• Keyboard key goes from flashing to lit.
• Note guide sounds the correct note to be played.
• Voice Fingering Guide tells you what finger to use.

2. To stop Lesson 1, press cl or 7.
Lesson 2: Watch how the song is played.
Play the song on the keyboard. During this lesson, the display
shows the key you need to press next. Voice fingering guide
also uses a simulate voice to announce which finger you
should use. Follow the instructions to press the correct
keyboard keys and play the notes. Don’t worry if you play the
wrong note. Song playback will wait until you play the correct
note. Take your time and play at your own pace.

1. Press cm.
This starts Lesson 2.

2. Play notes on the keyboard in accordance with
the instructions provided on the display and by
voice fingering guide.
During this lesson, the display shows the key you need to
press next. Voice fingering guide uses a simulate voice to
announce which finger you should use.

Flashes
Lights

EN-32

Pressing the correct keyboard key causes song
playback to resume and the key for the next note
flashes.

3. To stop Lesson 2, press cm or 7.
● If you complete Lesson 2 play to the end, a score that
rates your play appears on the screen.
Bravo!

You pass! Advance to the next lesson.

Again!

Go back and try again.

CDP230R_e.book

33 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Built-in Songs to Master Keyboard Play

Though song playback stands by waiting for you to press the
correct keys as in Lesson 2, the Digital Piano does not
provide any guidance about what note you need to play next.
Remember everything you have learned up to Lesson 2 as
you play.

Lesson Settings
Playing without Phrase Repeat
You can turn off phrase repeat for Lessons 1, 2, and 3.

1. Press 3.
This disables phrase repeat play.

1. Press cn.

Disappears

This starts Lesson 3.

2. Play the song along with the song playback.

Press the keyboard keys you learned in Lesson 2.

4
Song playback will wait for you to play the correct note.
• Note guide sounds the correct note to be played.

4
If you are still unable to press the correct keyboard
key, the Digital Piano will display keyboard guidance
and voice fingering guide will tell you what finger to
use, just as in Lesson 2.

Turning Off Voice Fingering Guide
Use the following procedure to turn off voice fingering guide,
which tells you which finger to use to play each note in
Lesson 2 and Lesson 3.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“LESSON” (page EN-7).
Flashes

Pressing the correct key will cause song playback to
resume.

L ESSON

3. To stop Lesson 3, press cn or 7.
• If you complete Lesson 3 play to the end, a score that
rates your play appears on the screen the same as with
Lesson 2.

2. Press br (10-key) [9] (ENTER) key.

Playing a Particular Song All the Way
Through
After you successfully complete all of the phrases in Lessons
1, 2, and 3, it is time to try playing the entire song from
beginning to end.

e a k

3. Press the br (10-key) [–] key to select the OFF
setting.

1. Use 8 to turn off both hand parts and then
press

Try playing with both hands and find out how the Digital
Piano evaluates your effort.

EN-33

English

Lesson 3: Remember what you learned as
you play.

CDP230R_e.book

34 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Built-in Songs to Master Keyboard Play

Turning Off Note Guide
Use the following procedure to turn off note guide, which
sounds the note to be played next in Lesson 2 and Lesson 3.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“LESSON” (page EN-7).

2. Press br (10-key) [9] (ENTER) key.
3. Use the br (10-key) [4] (U) and [6] (I) keys to
display “NoteGuid”.

No t eGu i d

Changing the Phrase Length
You can use the following procedure to change the length of
lesson phrases, or to configure the lesson feature so the song
is played all the way through, without being divided into
phrases.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“LESSON” (page EN-7).

2. Press br (10-key) [9] (ENTER) key.
3. Use the br (10-key) [4] (U) and [6] (I) keys to
display “PhraseLn”.

Ph r a s e L n

4. Press the br (10-key) [–] key to select the OFF
setting.

4. Use the br (10-key) [–] and [+] keys to select

Turning Off Performance Evaluation
Use the following procedure to turn off performance
evaluation, which evaluates your performance and displays a
score in Lesson 2 and Lesson 3.

the phrase length you want.
Off (oFF)

The phrase length is from the beginning
to the end of the song.

Preset (PrE)

Phrase lengths are as specified in the
song.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“LESSON” (page EN-7).

The following options are available for songs loaded from
external sources only.

2. Press br (10-key) [9] (ENTER) key.

Short (Ln1)

Length of one phrase is one measure.

3. Use the br (10-key) [4] (U) and [6] (I) keys to

Middle (Ln2)

Length of one phrase is two measures.

Long (Ln3)

Length of one phrase is four measures.

display “Scoring”.

Sc o r i n g
4. Press the br (10-key) [–] key to select the OFF
setting.

EN-34

CDP230R_e.book

35 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Built-in Songs to Master Keyboard Play

With Auto Step Up Lesson, the Digital Piano advances
through each lesson automatically.

1. Select the song and part you want to practice
(page EN-26).

■ Auto Step Up Lesson Procedure
Phrase 1
Lesson 1

English

Using Auto Step Up Lesson

4
Lesson 2
4
Lesson 3

2. Press cp.

Listen to the first phrase in Lesson 1.
• In Lesson 1, the sample phrase is played only once
before advancing to Lesson 2.

3. Auto Step Up Lesson stops automatically after
you are able to get through all of the lessons
successfully.
• In Lesson 2 and Lesson 3, the Digital Piano advances
to the next lesson if you are able to achieve the “Bravo!”
evaluation result.
• To cancel a lesson, press
or
.

Phrase 2
Lesson 1
4
Lesson 2
4
Lesson 3
4
Phrase 1, 2
• Lesson 3*

cp 7

4
Phrase 3
Lesson 1

• You can change the step and phrase during Auto Step Up
Lesson using
,
, and
to
.
• Starting Auto Step Up Lesson automatically turns on
phrase repeat (page EN-33) and play evaluation (page
EN-34). These features cannot be turned off during
lessons.

cl co

4
Lesson 2
4
Lesson 3
4
Phrase 1, 2, 3
• Lesson 3*

4
Next phrase practice using the same
procedure

4
Final phrase
Lesson 1
4
Lesson 2
4
Lesson 3
4
From Phrase 1 to the final phrase
• Lesson 3*

4
Lesson complete
* Auto Step Up Lesson advances to the next phrase,
regardless of whether the “Bravo!” result is attained.

EN-35

CDP230R_e.book

36 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Music Challenge Keyboard Game
bn bo bp

Music Challenge is a game that measures your reaction
speed as you press keys in response to on-screen keyboard
indicators and fingering guide indications.

1. Press bn (SONG BANK).

4. The game ends when you advance successfully
through 20 notes.
• Your playing time appears on the display. After a short
while, the playing time display changes to a score. To
clear the score from the display, press
(SONG
BANK),
(RHYTHM), or
(TONE).
• You can cancel a game at any time by pressing
or
.

2. Press cq.
This causes a key on the on-screen keyboard to start to
flash, and starts the Music Challenge song.

Playing time

Displayed during a game.

T i me 1 9 . 2

M . CHA L . !

Number of remaining notes

Sc o r e

8 0

Fingering
Score

3. After the on-screen keyboard indicator changes
from flashing to lit, press the indicated key with
the indicated finger as quickly as possible.
This causes the on-screen keyboard key to go out to let
you know that you cleared the first note. The next onscreen keyboard key starts to flash, so get ready to press
the next key.
• The time it takes you to press the keyboard key after
the on-screen key lights appears on the display (Unit:
0.1 sec). The shorter the time, the higher your score.
• Pressing a keyboard key before the on-screen key
goes from flashing to lit, will not advance to the next
note.
Time

0.3sec

M . CHA L . !
EN-36

• Notes and fingering guide fingers are indicated randomly.
• The tempo of the game songs cannot be changed.
• All buttons except
,
, and
are disabled while a
game is in progress.

CDP230R_e.book

37 ページ

２０１４年２月１９日 水曜日 午後５時１１分

bn bo bp bq

345678

With Auto Accompaniment, simply select an accompaniment
pattern. Each time you play a chord with your left hand the
appropriate accompaniment will play automatically. It’s like
having a personal backup group along with you wherever you
go.

• Auto Accompaniments are made up of the following three
parts.
(1) Rhythm
(2) Bass
(3) Harmony
You can have only the rhythm part play, or you can have all
three parts play at the same time.

Playing the Rhythm Part only
The rhythm part is the foundation each Auto Accompaniment.
Your Digital Piano comes with a variety of built-in rhythms,
including 8-beat and waltz. Use the following procedure to
play the basic rhythm part.

bt ck

Starting and Stopping the Rhythm Part only

1. Press bo (RHYTHM).
Rhythm number

Rhythm pattern name

n t hPo

2. Use br (10-key) to select the rhythm number
you want.
• See the separate “Appendix” for information about
individual rhythms.
• Use the number buttons to enter the rhythm number.
Specify three digits for the rhythm number.
Example : To select 001, enter 0 3 0 3 1.

• With rhythms 191 to 200, nothing will sound until you play a
chord on the keyboard.

3. Press 7 or 4.
This starts the rhythm.
This pattern changes with each beat.

4. Play along with the rhythm.
5. To stop the rhythm, press 7 again.

EN-37

English

Using Auto Accompaniment

CDP230R_e.book

38 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Auto Accompaniment

5. Pressing 8 again returns to rhythm only

Playing All Parts

accompaniment.

Auto Accompaniment with Chords
Playing a chord with your left hand automatically adds bass
and harmony accompaniment parts to the currently selected
rhythm. It is just like having your own personal back up group
on call.

1. Start play of the Auto Accompaniment rhythm
part.

2. Press 8.
This enables chord input on the accompaniment
keyboard.
Accompaniment keyboard

• For information about starting Auto Accompaniment as
soon as a chord is played, see “Using Synchro Start” on
page EN-41.
• You can use the split point to change the size of the
accompaniment keyboard range (page EN-15).

Selecting a Chord Input Mode
You can select from among the following five chord input
modes.
• FINGERED 1
• FINGERED 2
• FINGERED 3
• CASIO CHORD
• FULL RANGE CHORD

1. Hold down 8 until the chord input mode
selection screen appears on the display.
Chord input mode

Ch o r d

Lights

3. Use the accompaniment keyboard to play

2. Use the br (10-key) [–] and [+] keys to select

chords.

the chord input mode you want.

This will cause bass and harmony Auto Accompaniment
parts to be added to the rhythm part.

• If you do not perform any operation after the chord input
mode selection screen appears, the display will return
automatically to the screen that was displayed before
you held down
.

Chords
(no melody played)

Melody

F3
Example: Pressing D-F#-A-C on the accompaniment keyboard
4
Accompaniment for the D-F#-A-C chord (D7) sounds.

4. Play other chords with left hand as you play the
melody with your right hand.

EN-38

CDP230R_e.book

39 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Auto Accompaniment

With these three input modes, you play chords on the
accompaniment keyboard using their normal chord fingerings.
Some chord forms are abbreviated, and can be fingered with
one or two keys.
See page EN-75 for information about chords that are
supported and how they are fingered on the keyboard.
Accompaniment keyboard

● FINGERED 1
Play the component notes of the chord on
the keyboard.
● FINGERED 2
Unlike FINGERED 1, 6th input is not
possible. m7 or m7b5 is input.
● FINGERED 3
Unlike FINGERED 1, allows input of
fraction chords with the lowest keyboard
note as the bass note.

■ CASIO CHORD
With CASIO CHORD, you can use
simplified fingerings to play the four types
of chords described below.

CASIO CHORD Fingering
Chord Type

Example

Major Chords
Letters above the accompaniment
keyboard indicate the chord
assigned to each key. Pressing a
single accompaniment area key in
the CASIO CHORD mode will play
the major chord whose name is
marked above the key. All of the
accompaniment area keys that are
marked with the same chord name
play exactly the same chord.

C (C Major)

Minor Chords
To play a minor chord, press the
accompaniment area key that
corresponds to the major chord,
while also pressing one other
accompaniment area key to the
right.

Cm (C Minor)

Seventh Chords
To play a seventh chord, press the
accompaniment area key that
corresponds to the major chord,
while also pressing two other
accompaniment area keys to the
right.

C7 (C Seventh)

Minor Seventh Chords
To play a minor seventh chord,
press the accompaniment area key
that corresponds to the major
chord, while also pressing three
other accompaniment area keys to
the right.

Cm7
(C Minor Seventh)

C C#D Eb E F F#G Ab A Bb B C C#DEb E F

Accompaniment keyboard

• When playing a minor, seventh, or minor seventh chord, it
makes no different whether the additional keys you press
are black or white.

■ FULL RANGE CHORD
With this mode, you can use the full range
of the keyboard to play chords and the
melody.
See page EN-75 for information about
chords that are supported.
Accompaniment keyboard / Melody keyboard

EN-39

English

■ FINGERED 1, 2, and 3

CDP230R_e.book

40 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Auto Accompaniment

Using Auto Accompaniment
Effectively
Auto Accompaniment Pattern Variations
Use the following procedures to play intro and ending
patterns, to play fill-in patterns, and to play variations of basic
Auto Accompaniment patterns.

■ Auto Accompaniment Variation
Each Auto Accompaniment pattern has a basic “normal
pattern” as well as a “variation pattern”.

1. Press 5.

■ Auto Accompaniment Fill-in
Use the procedure below to play a fill-in pattern during a
performance.
• A “fill-in” is a short phrase played where you want to change
the mood of a piece. A fill-in pattern can be used to create a
link between two melodies or an accent.
• Normal and variation patterns have their own unique fill-in
patterns.
● Normal Pattern Fill-in

1. While a normal pattern is playing, press 4.
This plays the fill-in for the normal pattern.
• Normal pattern play will resume after the fill in pattern is
complete.
Lights

This starts the variation pattern.
Lights

● Variation Pattern Fill-in

2. Pressing 4 returns to normal pattern.
Lights

1. While a variation pattern is playing, press 5.
This plays the fill-in for the variation pattern.
• Variation pattern play will resume after the fill in pattern
is complete.
Lights

■ Auto Accompaniment Intro
Use the following procedure to play an intro of a few
measures.

1. Press 3.
This starts the intro pattern. Normal pattern play will start
when the intro pattern is finished.
• If you press
while an intro pattern is being played,
the variation pattern will start when the intro pattern is
finished.

Lights

■ Auto Accompaniment Ending
Use the following procedure to play an ending of a few
measures.

1. While an Auto Accompaniment is playing, press

6.
This will play the ending pattern and then stop Auto
Accompaniment play automatically.
Lights

EN-40

CDP230R_e.book

41 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Auto Accompaniment

Use the following procedure to configure the Digital Piano to
start Auto Accompaniment play as soon as you press a
keyboard key.

1. Press 6.

Adjusting the Accompaniment Volume
Use the following procedure to adjust the balance between
what you are playing on the keyboard and the volume of the
Auto Accompaniment.

1. Press ck (FUNCTION) and then use the br

This enters accompaniment start standby.

(10-key) [4] (U) and [6] (I) keys to display
“AcompVol” (page EN-7).

Flashes

A c om

Vo l

2. Use the br (10-key) [–] and [+] keys to adjust
the accompaniment volume.

2. Play a chord on the keyboard.
This will start full part accompaniment (normal).

Using One-Touch Preset

Any of the following operations can be performed while in
synchro standby to start a non-normal pattern.
• To start with intro pattern, press
.
• To start with variation pattern play, press
.

With One-Touch Preset, the Digital Piano automatically
configures optimal tone, tempo, and other settings in
accordance with the rhythm pattern you select.

1. Hold down bo (RHYTHM) until the current tone

Changing Auto Accompaniment Speed
(Tempo)

screen appears on the display.

Use the following procedure to change Auto Accompaniment
speed to a level that suits you.

This will automatically apply the One-Touch Preset
settings in accordance with the rhythm pattern that is
currently selected.

2. Play a chord on the keyboard.

1. Press 9.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing w and q at the same time will initialize the
tempo setting in accordance with the currently selected
rhythm.
• While the tempo value is flashing, you also can use
(10-key) to change it.
• If you do not perform any operation for a few seconds
after the tempo setting screen appears, the display will
return to the screen displayed before you pressed
.

This will start accompaniment automatically.

Flashes

EN-41

English

■ Using Synchro Start

CDP230R_e.book

42 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Auto Accompaniment
Type
number

Using Auto Harmonize
Auto Harmonize automatically adds harmony to notes you
play with your right hand, which adds rich depth to the melody
of your performances. You can select from among 12 types of
Auto Harmonize to suit the type of music you are playing.

• Auto Harmonize is controlled using the same button
as
the Arpeggiator (page EN-56). Because of this, these two
functions cannot be used at the same time.

1. Press 8 to enable Auto Accompaniment with

Type Name

Description

001

Duet 1

Adds close (separated by 2 to 4
degrees) 1-note harmony below
the melody note.

002

Duet 2

Adds open (separated by more
than 4 to 6 degrees) 1-note
harmony below the melody note.

003

Country

Adds country style harmony.

004

Octave

Adds the note from the next lower
octave.

chords (ACCOMP indicator lit) (page EN-38).

005

5th

Adds the fifth degree note.

• Auto Harmonize cannot be used while FULL RANGE
CHORD is selected as the chord input mode. Select
another mode if you want to use Auto Harmonize.

006

3-Way Open

Adds 2-note open harmony, for a
total of three notes.

007

3-Way Close

Adds 2-note close harmony, for a
total of three notes.

Arpeggiator type number and type name appear
on the display.

008

Strings

Adds harmony that is optimal for
strings.

• If you do not perform any operation for a few seconds,
the display will return to previous screen automatically.

009

4-Way Open

Adds 3-note open harmony, for a
total of four notes.

010

4-Way Close

Adds 3-note close harmony, for a
total of four notes.

011

Block

Adds block chord notes.

012

Big Band

Adds big band style harmony.

2. Hold down ct until the Auto Harmonize or

Type number

Type name

Du e t

3. Use the br (10-key) [–] and [+] keys to select
the Auto Harmonize type you want.
• 013 through 102 are Arpeggiator types (page EN-56).
Do not select them when using the Auto Harmonize.

Du e t

4. Press ct to turn on Auto Harmonize.
If you play chords with your left hand and the melody with
your right hand, harmony notes will be added to the
melody.
• Press
again to turn off Auto Harmonize.

S t . G r Pn o
Lit when on

EN-42

CDP230R_e.book

43 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using Auto Accompaniment

You can use the Chord Book to look up chords that you do not
know how to play.

1. Hold down bt until the message “ChordBk”

3. Use the br (10-key) [–] and [+] keys to select
the type of chord you want.
Selecting a chord type causes the chord to sound, and
shows the chord name and its notes on the display.
Example: Selecting M (Major)
Chord type

appears on the display.

Ch o r dBk

M (Ma j o r )

2. On the chord keyboard, press the keyboard key
that corresponds to the root note of the chord
you want to look up.
Chord keyboard

Chord name

Chord notes

• You can select any one of the following chord types.
M(Major), m(minor), dim, aug, sus4, sus2, 7th, m7,
b
b
M7, m7 5, 7 5, 7sus4, add9, madd9, mM7, dim7, 69,
6th, m6
• To display inverted forms of the chord, use
keys [0] through [4] as shown below.

Example: To look up C

Ch o r dBk

br (10-key)

To display this inverted form:

Press this key:

Normal form

First inversion

Second inversion

Third inversion

Fourth inversion

4. After you are finished looking up what you
Root note

want, press

bt to exit the Chord Book.

bn
bq.

• You can also exit the chord book by pressing
(SONG BANK),
(RHYTHM),
(TONE), or

EN-43

English

Looking Up the Notes of Chords
(Chord Book)

CDP230R_e.book

44 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Editing Auto Accompaniment Patterns
bo

345678

■ Editable Contents
•
•
•
•
•
•
•

■ Editable Accompaniment Patterns and
Instrument Parts
Any of the following parts that make up each rhythm that is
assigned a rhythm number can be edited.
Accompaniment patterns (intro, fill-in, etc.): 6 types
Instrument parts (drum, bass, etc.): 8 types

1. Select the number of the rhythm you want to
edit.

Button

ENDING

VARIATION
FILL-IN

VARIATION

NORMAL
FILL-IN

NORMAL

INTRO

2. Press bl.

1 Drum

I-1

N-1

NF-1

V-1

VF-1

E-1

2 Percussion

I-2

N-2

NF-2

V-2

VF-2

E-2

3 Bass

I-3

N-3

NF-3

V-3

VF-3

E-3

4 Chord 1

I-4

N-4

NF-4

V-4

VF-4

E-4

5 Chord 2

I-5

N-5

NF-5

V-5

VF-5

E-5

6 Chord 3

I-6

N-6

NF-6

V-6

VF-6

E-6

7 Chord 4

I-7

N-7

NF-7

V-7

VF-7

E-7

8 Chord 5

I-8

N-8

NF-8

V-8

VF-8

E-8

EN-44

Rhythm number
Part on/off
Tone number
Volume level
Left-right speaker balance (panning)
Reverb depth (reverb send)
Chorus depth (chorus send)

To edit and save an Auto Accompaniment

Accompaniment Pattern

Button

You can use the procedure in this section to edit the Digital
Piano’s built-in Auto Accompaniment rhythm patterns and
create your own “user rhythms”.
• You can store up to 10 user rhythms in Digital Piano
memory, using rhythm numbers 201 through 210.

Instrument
Parts

Lights

Rhythm number

D rm : Rh

Instrument part
Accompaniment Pattern (Flashes)

Editable content

If the “Err Mem Full” message appears on the display, see
page EN-73 for information about what you should do.

CDP230R_e.book

45 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Editing Auto Accompaniment Patterns

7. To edit the other contents, press ck

Accompaniment Pattern you want to edit.

(FUNCTION) to display the screen for the
setting you want.

The name of the pattern will appear on the display.

D rm : Rh

• Each press of
(FUNCTION) will cycle through the
settings shown below, from 1 through 6.
• Use the
(10-key) [–] and [+] keys to change the
currently selected setting.
• You can play the current settings of the editable part by
pressing
.

Setting Type
1 Part on/off

5 Variation selected
Pattern selected by each button
: Intro
: Normal, Normal Fill-in
(Each press toggles the selection.)
: Variation, Variation Fill-in
(Each press toggles the selection.)
: Ending

3
4
5
6

4. Press 8 to select the instrument part you want

Display
Part

Settings
On/Off

2 Tone number*

Tone

001 - 683

3 Volume level

Vol.

000 - 127

Pan

–64 - 0 - +63

Left-right speaker balance
(panning)

5 Reverb depth (reverb send) Rvb

000 - 127

6 Chorus depth (chorus send) Cho.

000 - 127

* Instrument parts 1 and 2 can be assigned drum set tones
(built-in tones 684 to 700) only.

8. Repeat steps 4 through 7 as many times as

to edit.
The part number of the part you select will flash on the
display.
Flashing: Part selected for editing.

necessary to edit the parts you want for the
pattern you selected in step 3.
• If you change the rhythm number in step 6, the editable
contents (1 through 6 in the above table) you last
configured in step 7 of this procedure will be overwritten
with the settings of the newly selected rhythm.

9. Repeat steps 3 through 8 as many times as
Parts that contain data.

Part 6 (Chord 3)

5. Press bo (RHYTHM).
This will display the rhythm name.

6. Use the br (10-key) [–] and [+] keys to select

necessary to edit the accompaniment patterns
you want (intro through ending).

10. Press bl.
This will display a message asking if you want to save the
user rhythm.

the rhythm number you want to assign to the
instrument part you are editing.
A different rhythm number is assigned for each instrument
part.
• You can play the data of the currently selected rhythm
number by pressing
.
• All of the eight instrument parts of an intro (I-1 to I-8)
must have the same rhythm number. If you assign
rhythm 003 to I-1, for example, 003 also will be
assigned automatically to parts I-2 through I-8. If you
then assign rhythm 004 to part I-2, for example, I-1 and
all of the other parts also will change to 004. All of the
eight parts of an ending (E-1 to E-8) also must have the
same rhythm number.

EN-45

English

3. Press a button from 3 to 6 to select the

CDP230R_e.book

46 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Editing Auto Accompaniment Patterns

11-1.Press the br (10-key) [–] key to exit without
saving.

To delete saved data
The following procedure cannot be performed while an Auto
Accompaniment editing (rhythm edit) operation is in progress.

This displays the delete confirmation message.
Press the
(10-key) [+] key to exit the editing
procedure.

1. Press ck (FUNCTION) and then use the br

11-2.Press the br (10-key) [+] key to save the data.

(10-key) [4] (U) and [6] (I) keys to display
“DELETE” (page EN-7).
Flashes

n t hPo

DELETE

• Use
(10-key) [–] and [+] keys to select the rhythm
number you want to save.
• You can edit the user rhythm name. Use the
(10-key) [4] (U) and [6] (I) keys to move the cursor to
the character you want to change, and then use [+] and
[–] to change the character.

Used memory (Unit: Kbytes)

Remaining memory capacity

2. Press the br (10-key) [9] (ENTER) key.
3. Press the br (10-key) [6] (I) key.

Us e

User rhythm name

4. Use the br (10-key) [–] and [+] keys to select
12. Press br (10-key) [9] (ENTER) key.
This will display a message asking if you want to save the
user rhythm.
• Press the
(10-key) [+] key to save the data.
• Press the
(10-key) [–] key to return to the screen
that was displayed before you pressed [9] (ENTER)
key.

br
br

• If you select a user rhythm number that already
contains data, the existing data will be replaced by the
new data.

• You cannot change the tone assigned to the keyboard
while an Auto Accompaniment editing (rhythm edit)
operation is in progress.

■ Saving User Rhythm Data on an External Device
• Memory card (page EN-60)
• Computer (page EN-67)

EN-46

the user rhythm you want to delete.

5. Press the br (10-key) [9] (ENTER) key.
This displays a delete confirmation message.

Su r e ?
6. Press the br (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [7]
(EXIT) in place of [+] (YES).

CDP230R_e.book

47 ページ

２０１４年２月１９日 水曜日 午後５時１１分

English

Saving Keyboard Setups to Registration Memory
br

cl cm cn co cp cq
Registration memory lets you store Digital Piano setups (tone,
rhythm, etc.) for instant recall whenever you need them.
Registration memory simplifies performance of complex
pieces that require successive tone and rhythm changes.
You can have up to 32 setups in Registration memory at one
time.
and
to
are used for recording.

cm cp

■ Registration Save Example
This example saves the data shown in the table below to the
following setups in Bank 1.
• Initial melody setup saved to Setup 1-1.
• Second melody setup saved to Setup 1-2.
• Third melody setup saved to Setup 1-3.
Setup 1–1

Setup 1–2

Setup 1–3

Tone Number

001

062

001

Rhythm Number

118

005

089

Tempo

080

140

089

■ Registration Memory Data
The following is the complete list of data that is saved to a
registration memory setup.

Area 1

Area 2

Area 3

Area 4

Bank 1

Setup 1-1

Setup 1-2

Setup 1-3

Setup 1-4

Bank 2

Setup 2-1

Setup 2-2

Setup 2-3

Setup 2-4

.
.

Bank 8

Setup 8-1

Setup 8-2

Setup 8-3

Setup 8-4

• Each press of bank select button
cycles through the
bank numbers, from 1 to 8.
• Pressing a button from
to
selects the corresponding
area in the currently selected bank.

cm cp

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Tone numbers (main, layer, split)
Rhythm number
Tempo
Auto Harmonize
Transpose
Split point
Touch Response
Octave shift
Chord fingerings
Accompaniment volume
Arpeggiator setting (on, off, type)
Synchro start
Hall (on, off)
Reverb (on, off, type)
Chorus (on, off, type)
Bend Range
Accomp (on, off)
Arpeggiator hold (on, off)
Layer (on, off)
Split (on, off)
Pedal effect

EN-47

CDP230R_e.book

48 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Saving Keyboard Setups to Registration Memory

To save a setup to registration
memory
1. Press bo (RHYTHM).

To recall a setup from registration
memory
1. Press cl to select the bank that contains the
setup you want to recall.

Bank number

Bank 6

2. Configure the tone, rhythm, and other settings
2. Use buttons cm to cp to select the area whose

you can to include in the setup.

setup you want to recall.

3. Press cl to select the bank you want.
Each press of

cl cycles through the bank numbers.
Bank 4

This will recall the registration memory setup and
automatically configure the Digital Piano settings
accordingly.

Re c a l l
Setup 6-1 recalled

• You also can select a bank by holding down
as you
use the
(10-key) number buttons to enter a bank
number.

4. While holding down cq, press a button from cm
to

cp to select an area.

This will save the settings you configured in step 2 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.

S t o r e
Stored in Setup 4-1

EN-48

• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page EN-17). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).

■ Saving registration Data on an External Device
• Memory card (page EN-60)
• Computer (page EN-67)

CDP230R_e.book

49 ページ

２０１４年２月１９日 水曜日 午後５時１１分

bn bo bp

The recorder feature lets you record your keyboard play.

English

Recording Your Keyboard Play
br

cl cm cn co cp cq
4. Configure the tone, rhythm, and other settings
you want to use.

Recording and Playing Back
Keyboard Play
Use the following procedure to record everything you play on
the keyboard.

1. Press bo (RHYTHM).
2. Press bk.
Lights

5. Start playing.
Recording starts as soon as you play something on the
keyboard.

• You can use Auto Accompaniment while playing. If you do,
Auto Accompaniment also will be recorded.

6. To stop recording, press 7.
Lights

3. Press bk again.
This will enter record standby.
Flashes

7. To play back what you have recorded, press 7
again.
Each press of

7 starts and stops playback.

EN-49

CDP230R_e.book

50 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Recording Your Keyboard Play

8. Press bk twice to exit the recorder mode.
Disappears

Using Tracks to Record and Mix
Parts
You can divide a song according to various types of parts
(instrument, left and right hand, etc.), and record each part to
a specific track. You can mix up to six tracks (the original track
plus five additional tracks) into a final song.

■ About tracks
• The flashing on the screen shown in step 3 becomes
faster when remaining recorder memory capacity
becomes less than 100 notes.
• Total recorder memory capacity is approximately
12,000 notes. Recording will stop automatically when
there is no more unused recorder memory remaining.
• Each press of
cycles through the settings shown
below. You can listen to the recorded data as many
times as you like by pressing
while in playback
standby.

Recorder Off

Playback
Standby

Record Standby

Tracks are numbered from 1 to 6.
• If you do not specify a track number when recording,
recording is performed to Track 1 automatically.
In addition to what you play on the keyboard, the following
information also is recorded.
• Track 1
Settings:
Tone number, rhythm number, tempo, hall, reverb, chorus,
chords, layer/split settings, Auto Harmonize/Arpeggiator
setting
Operations:
Pedal, pitch bend wheel, INTRO button, SYNCHRO/
ENDING button, NORMAL/FILL-IN button, VARIATION/
FILL-IN button
• Tracks 2 through 6
Tone number, pedal operation, pitch bend wheel operation

■ To delete recorded data

After step 3 of the above procedure, do hold down
(without pressing any keyboard key) until the message
“Tr.Del?” appears on the display. Press [+] (YES) to delete the
data, or [–] (NO) to cancel the delete operation.

• Turning off the Digital Piano while recording is in
progress will cause any data in recorder memory to be
deleted.
• A new recording replaces (deletes) previously recorded
contents.

To record to Tracks 1 through 6

1. Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under
“Recording and Playing Back Keyboard Play” (page
EN-49).
Lights

2. Press bk.
This will enter record standby.
Flashes

EN-50

CDP230R_e.book

51 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Recording Your Keyboard Play

number of the next track to which you want to
record.
This will enter record standby for the track you selected.
Example: Track 2
Flashes

7. After you finish recording all of the tracks,
press

• This will start playback of the recorded tracks. Press
to stop or restart playback.
• At this time you can turn off playback of specific tracks
using buttons
to
. Pressing a key toggles
playback of each track on (track number displayed) or
off (track number not displayed).
• If you want to re-record a track, press
. This will
return to step 2 of the above procedure. Only the tracks
that are turned on (displayed) above will play as you
re-record.
Example: Tracks 2 and 3 selected

cl cq

Disappears

• If you want to use a different tone than the one you
used in Track 1, press
(TONE) and then use
(10-key) to input the tone number.

4. Press 7.
This will start playback of what you recorded up to this
point in other tracks and record what you play on the
keyboard to the currently selected track. Play the notes
you want on the keyboard.

5. To stop recording, press 7.
• To play back what you have recorded, press
Each press of
starts and stops playback.

7 again.

8. Press bk twice to exit the recorder mode.
Disappears

■ To delete a recorded track

6. Repeat steps 2 through 5 to record the other
tracks.

After step 3 of the above procedure, do hold down
(without pressing any keyboard key) until the message
“Tr.Del?” appears on the display. Press [+] (YES) to delete the
track, or [–] (NO) to cancel the delete operation.

EN-51

English

3. Press a button from cm to cq to select the track

CDP230R_e.book

52 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Recording Your Keyboard Play

Recording Two or More Songs,
and Selecting One for Playback
You can record up to five songs (numbered 1 through 5) in
memory. After that, you can select a specific song for
playback.

1. Press bo (RHYTHM).
2. Press bk.
A song number will appear in the upper left corner of the
display for a few seconds. While it is, use
(10-key) to
specify the number of the song you want to record or play
back. The song number will disappear if you do not
perform any operation.
Example: Song 2

Recording while Playing Along
with a Built-in Song
This section explains how to play along and record along with
one of the Digital Piano’s built-in songs.
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo, hall,
reverb, chorus, layer/split settings, pitch bend wheel operation

• There can be only one recording of keyboard play with a
built-in song in recorder memory. Making a new recording
replaces (deletes) previously recorded data.

1. Press bn (SONG BANK).
2. Press bk.

P l a

No .

This will enter playback standby.
Lights

3. Press bk to record, or 7 to play back.
To stop recording or playback, press

4. Press bk twice to exit the recorder mode.
■ To delete recorded data

After step 2 of the above procedure, do hold down
(without pressing any keyboard key) until the message “Song
Del?” appears on the display. Press [+] (YES) to delete the
song, or [–] (NO) to cancel the delete operation.

3. Press bk again.
This will enter record standby.
Flashes

4. Use br (10-key) to enter the song number you
want to assign to the recording.

EN-52

CDP230R_e.book

53 ページ

２０１４年２月１９日 水曜日 午後５時１１分

5. Press 8 to cycle through the parts in the
sequence shown below.

Saving Recorded Data on an
External Device
You can save data you record with the Digital Piano onto a
memory card or on your computer’s hard disk. In the case of a
memory card, you can save recorded song data as a standard
MIDI file (SMF 0 format).

Right-hand Recording

Left-hand Recording

■ To save data to a memory card
See page EN-60.

Both-hand Recording

■ To save data on your computer’s hard disk
See page EN-67.

Example: Left-hand part recording
Flashes

• Configure tone and tempo settings at this time as well.

6. Press 7 to start built-in song playback and
recorder recording.
Play along with the playback.
• To stop recording part way through, press

7. Recording will stop automatically when the end
of the built-in song is reached.
This will enter playback standby.
Lights

8. Press 7.
This will start playback of what you recorded.
• Each press of
starts and stops playback.

9. Press bk twice to exit the recorder mode.
■ To delete recorded data

After step 2 of the above procedure, do hold down
until
the message “Song Del?” appears on the display. Press [+]
(YES) to delete the song.

EN-53

English

Recording Your Keyboard Play

CDP230R_e.book

54 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Other Useful Digital Piano Functions
bn bo bp

Changing the Scale of the
Keyboard
You can use the following procedure to select from among 17
preset scales, including the standard Equal Temperament.
No.

Scale name

Display

Equal Temperament

Equal

Pure Major

PureMajr

Pure Minor

PureMinr

Pythagorean

Pythagor

Kirnberger 3

Kirnbrg3

Werckmeister

Wercmeis

Mean-Tone

MeanTone

Rast

Bayati

Hijaz

Saba

Dashti

Chahargah

Chaharga

Segah

Gurjari Todi

GujrTodi

Chandrakauns

Cndrkuns

Charukeshi

Carukesi

1. Press bo (RHYTHM).
2. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“SCALE” (page EN-7).
Flashes

SCALE
EN-54

3. Press br (10-key) [9] (ENTER) key.

u a l

Scale Name

4. Use the br (10-key) [–] and [+] keys to select
the preset scale you want. After selecting a
scale, press the key on the keyboard that you
want to use as the root key (C to B).

5. After you are finished, press ck (FUNCTION) to
assign the scale to the keyboard.

CDP230R_e.book

55 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Other Useful Digital Piano Functions

You can use the following procedure to reflect the preset
scale you selected in Auto Accompaniments.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“OTHER” (page EN-7).

Using Music Preset
Selecting a Music Preset instantly changes the Digital Piano
to a preset setup (tone, rhythm, tempo, etc.) for play of songs
of various genres/categories. The press of a button sets up
the Digital Piano so those songs sound exactly the way you
thought they should.
• See the separate “Appendix” for a complete list of the 305
Music Presets that are available.

1. Hold down bp (TONE) until the indicator shown

Flashes

below appears on the display.

OTHER

Preset number

2. Press br (10-key) [9] (ENTER) key.

Preset name

I L o v eHe r

3. Use the br (10-key) [4] (U) and [6] (I) keys to
display “AcompScl”.

A c om

Sc l
Lights

4. Use the br (10-key) [+] key to select on.

2. Use br (10-key) to select the preset number
you want.
This will change the setup (tone, rhythm, etc.) of the
Digital Piano.
• At this time the Digital Piano will go into Auto
Accompaniment synchro start standby (page EN-41).
• Pressing
(SONG BANK),
(RHYTHM), or
(TONE) will return to the screen that was displayed
before you held down in step 1, above.

3. Play along on the keyboard with the
accompaniment.

EN-55

English

Using the Current Scale Notes for Auto
Accompaniments

CDP230R_e.book

56 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Other Useful Digital Piano Functions
Type
number

Using the Arpeggiator
The Arpeggiator makes it possible to play an arpeggio pattern
automatically. There are 90 different arpeggio patterns from
which to choose in order to match the music you are playing.

Type Name

013-030

Rising

031-048

Down

Falling

049-066

U/D A

Repeat pattern alternating
between rising and falling
(Type A)

067-084

U/D B

Repeat pattern alternating
between rising and falling
(Type B)

085-102

Random

Random arrangement of
notes of the pressed keys

• The Arpeggiator is controlled using the same button
as
Auto Harmonize (page EN-42). Because of this, these two
functions cannot be used at the same time.

1. Hold down ct until the Auto Harmonize or
Arpeggiator type number and type name appear
on the display.
• If you do not perform any operation for a few seconds,
the display will return to the previous screen
automatically.
Type number

Type name

Du e t

Description

3. Press ct to turn on Arpeggiator.
Playing a chord on the keyboard will start arpeggio play.
• Press
again to turn off Arpeggiator.

S t . G r Pn o

2. Use the br (10-key) [–] and [+] keys to select

Lit when on

the Arpeggiator type you want.
• 001 through 012 are Auto Harmonize types (page
EN-42). Do not select them when using the
Arpeggiator.
Octave
1... Uses the actual notes played.
2... Uses the actual notes played plus the same notes one octave.
4... Uses the actual notes played plus the same notes three octaves.

• The tempo setting of the Arpeggiator is the same as that set
for the metronome (page EN-12).

Sustaining an Arpeggio (Arpeggiator Hold)

1Up

Speed (The number of arpeggio notes per beat)

Use the following procedure when you want an arpeggio
pattern to keep playing after you release the keyboard keys.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“OTHER” (page EN-7).

2. Press br (10-key) [9] (ENTER) key.

A r p e gH l d
3. Press the br (10-key) [+] key to select the ON
setting.

EN-56

CDP230R_e.book

57 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Deleting User Song Data
You can use the following procedure to delete user song data
stored as song numbers 153 through 162.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“DELETE” (page EN-7).
Flashes

DELETE

Deleting All Data in Digital Piano
Memory
Use the following procedure when you want to delete sampled
sounds, user songs and all other data, except for recorded
songs, currently in Digital Piano memory.

• Performing this procedure also will delete protected
sampled sound data (page EN-25). It is recommended
that you save important data to a memory card (page
EN-58) or your computer’s hard disk (page EN-64).
• This operation does not delete recorded song data.

1. Press ck (FUNCTION) and then use the br
Used memory
(Unit: Kbytes)

Remaining
memory capacity

(10-key) [4] (U) and [6] (I) keys to display
“DELETE” (page EN-7).
Flashes

2. Press the br (10-key) [9] (ENTER) key.
3. Press the br (10-key) [6] (I) key twice.

USERSONG

DELETE
Remaining
memory capacity

Used memory
(Unit: Kbytes)

User song name

4. Use the br (10-key) [–] and [+] keys to select
the user song you want to delete.

2. Press the br (10-key) [9] (ENTER) key.
3. Use the br (10-key) [4] (U) and [6] (I) keys to
display “All Data”.

5. Press the br (10-key) [9] (ENTER) key.

Flashes

This displays a delete confirmation message.

A l l

Da t a

4. Press the br (10-key) [9] (ENTER) key.
This displays a delete confirmation message.

Su r e ?
5. Press the br (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [7]
(EXIT) in place of [+] (YES).

EN-57

English

Other Useful Digital Piano Functions

CDP230R_e.book

58 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using a Memory Card
bq

7
You can save Digital Piano user area data to a memory card
and load data from a memory card to Digital Piano memory.
You also can play music files (MIDI files) stored on a memory
card on the Digital Piano.

• Use an SD memory card or an SDHC
memory card with a capacity of 32GB
or less. Use of a memory card with a
capacity that is greater than 32GB
and other types of memory cards is
not supported.
• SDHC Logo is a trademark of SD-3C, LLC.
User data that can be saved and loaded
Data Type

File Name
Extension

Description

Sampled sound
(page EN-19)

Sampled sound data

TW7
DW7*1

User rhythms
(page EN-44)

Edited Auto
Accompaniment data

AC7

User songs
(page EN-29)

Song data imported from
an external device (cannot
be saved to a memory
card).

CM2
MID*2

Recorded songs
(page EN-49)

Recorded song data

SP7
SL7*3

Registration
setups
(page EN-47)

Tone and rhythm setup
settings

RM7

All data

Above data

AL7

*1: Sampled drum set sounds
*2: Standard MIDI file (format 0, 1)
*3: Data recorded playing along with built-in song

• Use only memory cards. Operation is not guaranteed
when any other type of memory card is used.

EN-58

Memory Card and Card Slot
Precautions
• When using a memory card, make sure you observe all
of the precautions in the instructions that come with it.
• Memory cards have a write-protect switch that you can
use to protect against accidental deletion of data.
• Avoid using a memory card under the following
conditions. Such conditions can corrupt data stored on
the memory card.
– Areas subjected to high temperature, high humidity,
and corrosive gas
– Areas subjected to strong electrostatic charge and
digital noise
• Never touch the contacts of a memory card when
loading it or removing it from the Digital Piano.
• While data is being stored to or recalled from a memory
card, never perform any other Digital Piano operation
or remove the memory card. Doing so can corrupt the
data on the card and damage the card slot.
• Never insert anything besides a memory card into the
card slot. Doing so creates the risk of malfunction.
• Electrostatic charge discharging from your fingers or
the memory card to the card slot can cause
malfunction of the Digital Piano. If this happens, turn
the Digital Piano off and then back on again.
• A memory card can become quite warm after very long
use in the memory card slot. This is normal and does
not indicate malfunction.

CDP230R_e.book

59 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using a Memory Card

Formatting a Memory Card

• Note that the memory card must be oriented correctly
when you insert it into the memory card slot. Trying to
force the memory card into the slot can damage the
card and the slot.

1. With the top of the memory card facing
upwards (so you can see it), carefully insert the
card into the Digital Piano’s memory card slot
( ) until stops with a click.

• Before using a memory card, first be sure to format it
on the Digital Piano.
• Before performing the procedure below, check to make
sure that the memory card does not contain any data
you might need.
• The memory card format performed by the Digital
Piano is a “quick format”. If you want to completely
delete all of the data on the card, format it on your
computer or using some other device.

1. Insert the memory card you want to format into
the Digital Piano’s card slot.
• Make sure that the write-protect switch of the memory
card is not in the write-protect position.

2. Press bq and ck (FUNCTION) at the same time.
Front

2. Press the memory card into the card slot and
then release it.
This will cause the card to disengage and eject partially.
Pull the card out of the slot.

F o r ma t
3. Press the br (10-key) [9] (ENTER) key.
This will display the format confirmation screen.

Su r e ?
4. Press the br (10-key) [+] (YES) key.
The message “Pls wait” will appear on the display. Do not
perform any operation while this message is displayed.
“Complete” appears on the display after formatting is
complete.
• To cancel the format operation, press [–] (NO) or [7]
(EXIT) in place of [+] (YES).

P l s

wa i t

Comp l e t e

EN-59

English

Inserting and Removing a
Memory Card

CDP230R_e.book

60 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using a Memory Card

Saving Digital Piano Data to a
Memory Card
Use the following procedure to save Digital Piano data to a
memory card.

1. On the Digital Piano, select the data you want to
save as described below.
To save this type
of data

Do this

Sampled sound

Select the tone number of the sampled
sound you want to save.

User rhythm

Select the rhythm number of the user
rhythm you want to save.

Recorded song

Select the song you want to save and
put the Digital Piano in playback
standby.

Registration data
All data

4. Use the br (10-key) [4] (U) and [6] (I) keys to
display one of the settings shown below.
• You also could use [–] and [+].
To save this data

Display this screen

Sampled sound

“SAv” “SmplTone”

User rhythm

“SAv” “UserRhy.”

Recorded song

“SAv” “Rec.Song”

Recorded song
(SMF 0 format)

“SAv” “SMF 0”

Registration data

“SAv” “Regist.”

All data

“SAv” “All Data”

Saving a recording made while playing along with a built-in
song in SMF 0 format will save only what was played on the
keyboard.

5. Press the br (10-key) [9] (ENTER) key.

Select one of the Digital Piano’s default
built in tones or rhythms.

USERNAME

• You cannot save a user song (song data loaded from
an external device) to a memory card.
• See page EN-58 for information about data types.

Flashes

2. Insert a memory card into the Digital Piano’s
card slot.

3. Hold down bq until the screen shown below
appears on the display.
• To cancel data save, press

• Enter the file name of the data you are saving. Use the
(10-key) [4] (U) and [6] (I) keys to move the cursor
to the character you want to change, and then use [+]
and [–] to change the character.
• Pressing [7] (EXIT) will return to the screen that was
displayed before you pressed [9] (ENTER).

bq again.

6. Press the br (10-key) [9] (ENTER) key.
This will save the data to the memory card.

Comp l e t e
• If there is a file with the same name already on the
memory card, a message will appear asking if you want
to overwrite it. Press the
(10-key) [+] (YES) key to
overwrite, or [–] (NO) or [7] (EXIT) to cancel.

Re p l a c e ?

EN-60

CDP230R_e.book

61 ページ

２０１４年２月１９日 水曜日 午後５時１１分

• You can input the following characters in a file name.

0
A
K
U
(

1 2 3
B C D
L M N
V W X
) - ^

4
E
O
Y
{

5 6
F G
P Q
Z S
} @

7
H
R
&
~

8
I
S
_
`

Loading Data from a Memory
Card into Digital Piano Memory

9
J
T
'

Use the following procedure to load data from a memory card
into Digital Piano memory.

• The Digital Piano displays the “~” character as “3”.

1. On the Digital Piano, select the data you want to

■ Memory Card Data (File) Storage Locations
The above procedure stores Digital Piano data in a folder
named “MUSICDAT” on the memory card.
• The “MUSICDAT” folder is created automatically when you
format the memory card on the Digital Piano (page
EN-59).
• If you store a file in any location other than inside the
“MUSICDAT” folder, you will not be able to recall, delete, or
play the file on the Digital Piano. You also will not be able to
recall, delete, or play any file you store inside of a subfolder
you create inside the “MUSICDAT” folder.
• The message “No File” will appear on the display if you try
to perform a recall, delete, or play operation while there is
no file inside the “MUSICDAT” folder.

• Whenever you copy a file to the memory card that you
plan to recall on the Digital Piano, be sure to store the
file in the memory card’s “MUSICDAT” folder.

load as described below.
To load this type
of data

Do this

Sampled sound

Select the tone number of the sampled
sound you want to load.

User rhythm

Select the rhythm number of the user
rhythm you want to load.

User song

Select the song number of the song you
want to load.

Recorded song

Select the song you want to load and
put the Digital Piano in playback
standby.

Registration data

Select one of the Digital Piano’s default
built in tones, songs, rhythms, etc.

All data

2. Insert the memory card that contains the data
into the Digital Piano’s card slot.

3. Hold down bq until the screen shown below
appears on the display.
• To cancel data load, press

bq again.

4. Use the br (10-key) [4] (U) and [6] (I) keys to
display one of the settings shown below.
• You also could use [–] and [+].
To load this data

Display this screen

Sampled sound

“Lod” “SmplTone”

User rhythm

“Lod” “UserRhy.”

User song

“Lod” “UserSong”

Recorded song

“Lod” “Rec.Song”

Registration data

“Lod” “Regist.”

All data

“Lod” “All Data”

EN-61

English

Using a Memory Card

CDP230R_e.book

62 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Using a Memory Card

5. Press the br (10-key) [9] (ENTER) key.

********
Flashes

• Pressing [7] (EXIT) will return to the screen that was
displayed before you pressed [9] (ENTER).

6. Use the br (10-key) [–] and [+] keys to select

Deleting Data from a Memory
Card
Use the following procedure to delete data saved on a
memory card.

1. On the Digital Piano, select the data you want to
delete as described below.
To delete this
type of data
Sampled sound

Select the tone number of the sampled
sound.

User rhythm

Select the rhythm number of the user
rhythm.

User song

Select the song number of the user
song.

Recorded song

Select the song and put the Digital
Piano in playback standby.

Registration data

Select one of the Digital Piano’s default
built in tones, songs.

the data (file) you want to load.

7. Press the br (10-key) [9] (ENTER) key.
This will load the data into Digital Piano memory.

Comp l e t e
• If there is already data stored in the user area where
you are trying to load data, an overwrite confirmation
message will appear. Press the
(10-key) [+] (YES)
key to overwrite, or [–] (NO) or [7] (EXIT) key to cancel.

Do this

All data

2. Insert a memory card into the Digital Piano’s
card slot.

3. Hold down bq until the screen shown below
appears on the display.

Re p l a c e ?

• To cancel data delete, press

bq again.

4. Use the br (10-key) [4] (U) and [6] (I) keys to
display one of the settings shown below.
• You also could use [–] and [+].
To delete this type
of data

EN-62

Display this screen

Sampled sound

“dEL” “SmplTone”

User rhythm

“dEL” “UserRhy.”

User song

“dEL” “UserSong”

Recorded song

“dEL” “Rec.Song”

Registration data

“dEL” “Regist.”

All data

“dEL” “All Data”

CDP230R_e.book

63 ページ

２０１４年２月１９日 水曜日 午後５時１１分

5. Press the br (10-key) [9] (ENTER) key.

********

Playing Back Data from a Memory
Card
You can use the following procedure to play back user song
data (page EN-58) directly from a memory card.

Flashes

• Pressing [7] (EXIT) will return to the screen that was
displayed before you pressed [9] (ENTER).

6. Use the br (10-key) [–] and [+] keys to select
the number of the data (file) you want to delete.

7. Press the br (10-key) [9] (ENTER) key.
This will display the delete confirmation screen.

• Whenever you copy a file to the memory card that you
plan to play on the Digital Piano, be sure to store the
file in the memory card’s “MUSICDAT” folder (page
EN-61).

1. Insert the memory card that contains the data
into the Digital Piano’s card slot.

2. Press bq.
This will display the file numbers and song names for the
data stored on the display.

Su r e ?
8. Press the br (10-key) [+] (YES) key.
• To cancel the delete operation, press [–] (NO) or [7]
(EXIT) in place of [+] (YES).

3. Use br (10-key) to select the song you want to
play.

4. Press 7.
This will start playback.
• Each press of
starts and stops playback.

Memory Card Error Messages

Comp l e t e

For information about memory card error messages, see page
EN-73.

EN-63

English

Using a Memory Card

CDP230R_e.book

64 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Connecting External Devices
br

Connecting to a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play data
from the Digital Piano to commercially available music
software running on your computer, or you can send MIDI
data from your computer to the Digital Piano for playback.

Minimum Computer System Requirements
The following shows the minimum computer system
requirements for sending and receiving MIDI data. Check to
make sure that your computer complies with these
requirements before connecting the Digital Piano to it.
• Operating System
Windows® XP (SP2 or later) *1
Windows Vista® *2
Windows® 7 *3
Windows® 8 *4
Mac OS® X (10.3.9, 10.4.11, 10.5.X, 10.6.X, 10.7.X, 10.8.X)
*1: Windows XP Home Edition
Windows XP Professional (32-bit)
*2: Windows Vista (32-bit)
*3: Windows 7 (32-bit, 64-bit)
*4: Windows 8 (32-bit, 64-bit)

Connecting the Digital Piano to Your
Computer

• Make sure you follow the steps of the procedure below
exactly. Connecting incorrectly can make data send
and receive impossible.

1. Turn off the Digital Piano and then start up your
computer.
• Do not start up the music software on your computer
yet!

2. After starting up your computer, use a
commercially available USB cable to connect it
to the Digital Piano.
B connector
USB cable
(A-B type)
Digital Piano USB port
A connector

• USB port

• Never connect to a computer that does not conform to
the above requirements. Doing so can cause problems
with your computer.

Computer USB port

3. Turn on the Digital Piano.
• If this is the first time you are connecting the Digital
Piano to your computer, the driver software required to
send and receive data will be installed on your
computer automatically.

4. Start up commercially available music software
on your computer.

EN-64

CDP230R_e.book

65 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Connecting External Devices

one of the following as the MIDI device.
CASIO USB-MIDI : For Windows Vista, Windows 7,
Windows 8, Mac OS X
USB Audio Device : For Windows XP
• For information about how to select the MIDI device,
see the user documentation that comes with the music
software you are using.

MIDI Settings
Keyboard Channel
A keyboard channel is the channel used for sending Digital
Piano data to a computer. You can select the channel you
want for sending Digital Piano data to a computer.
• The keyboard channel setting range is 01 to 16.

1. Press ck (FUNCTION) and then use the br
• Be sure to turn on the Digital Piano first before starting
up your computer’s music software.

(10-key) [4] (U) and [6] (I) keys to display
“MIDI” (page EN-7).
Flashes

• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when you
turn off your computer and/or Digital Piano.
• This Digital Piano conforms to General MIDI Level 1 (GM).
• For detailed specifications and connections that apply to
MIDI data send and receive by this Digital Piano, see the
latest support information provided by the website at the
following URL.
http://world.casio.com/

M I D I
2. Press br (10-key) [9] (ENTER) key.

Ke y b d

3. Use the br (10-key) [–] and [+] keys to change
the keyboard channel.

Navigate Channels
The navigate channels can be used to display only the notes
of a particular channel (part) as on-screen guide information
from among the note information of a tune sent from the
computer.

■ Specifying the Navigate Channels
From among the 16 available channels (numbered 1 to 16),
you can specify any two neighboring channels (such as 05
and 06) as navigate channels. The smaller numbered channel
is the navigate (L) channel, while the larger numbered
channel is the navigate (R) channel. Specifying the navigate
(R) channel will automatically configure the navigate (L)
channel as well.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“MIDI” (page EN-7).

2. Press br (10-key) [9] (ENTER) key.
3. Use the br (10-key) [4] (U) and [6] (I) keys to
display “Navi. Ch”.

Na v i .

Ch
EN-65

English

5. Configure the music software settings to select

CDP230R_e.book

66 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Connecting External Devices

4. Use the br (10-key) to specify the navigate (R)
channel.

Local Control
There are times when exchanging data with a computer when
you may not want the Digital Piano to sound notes you play on
its keyboard. The local control setting lets you do just that.

This also will automatically configure the next lower
channel number as the navigate (L) channel.

■ Turning Off the Navigate Channel Sound and
Playing the Part on the Keyboard
You can turn off the sound on one or both of the navigate
channels and play the cancelled part on the keyboard
yourself.

1. Press 8 to select the channel setting you want
to turn off.

Each press of
cycles through settings (1) through (4)
described below.
• If you turn off one channel, you can play the cancelled
part on the keyboard using the same tone as the
channel you turned off. If you turn off both channels
(option (3)), what you play on the keyboard sounds
using the tone of the navigate (R) channel.

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“MIDI” (page EN-7).

2. Press br (10-key) [9] (ENTER) key.
3. Use the br (10-key) [4] (U) and [6] (I) keys to
display “Local”.

L o c a l
4. Use the br (10-key) [–] and [+] keys to specify

Selected channel indicator appears.

the local control setting.

Accomp Out
Enabling the Accomp Out setting causes Auto
Accompaniment data to be sent to the computer.

Navigate (L)
Channel

Navigate (R)
Channel

OnOnSound screen Sound screen
Guide
Guide
(1) R only displayed

{

(2) L only displayed

{

(3) LR displayed

{

(4) LR nor displayed

{

1. Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“MIDI” (page EN-7).

2. Press br (10-key) [9] (ENTER) key.
3. Use the br (10-key) [4] (U) and [6] (I) keys to
display “AcompOut”.

A c ompOu t
4. Use the br (10-key) [–] and [+] keys to turn
Accomp Out on or off.

EN-66

CDP230R_e.book

67 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Storing and Loading Digital Piano
Memory Data
You can transfer sampled sounds, recorded songs, and other
data in Digital Piano memory to a computer for storage. You
also can load standard MIDI file (SMF) data, and Auto
Accompaniment data you download from the CASIO website
to the Digital Piano, which greatly expands the Song Bank
songs and Auto Accompaniment patterns available to you.
A special Data Manager application is required in order to
transfer data to and from the Digital Piano.

• Since the accompaniment data is for other models, you
may experience some abnormalities when playing it on this
model.
• For information about accompaniment data compatibility
between models, see the Data Manager user’s guide you
download in step 5 of the above procedure.

Data Types Supported for Data Transfer
The same types of data that you can store to or recall from a
memory card (page EN-58) can be transferred to and from the
Digital Piano. Note, that recorded song data can be
transferred to a computer in the Digital Piano’s native format
only. You cannot save recorded song data to a computer as a
standard MIDI file (SMF format).

Downloading Data Manager

1. Go to the CASIO WORLDWIDE site at the
following URL.
http://world.casio.com/

2. At the site, select a geographic area or country.
3. After accessing the area site, navigate to the
minimum computer system requirements for
Data Manager for this product.
• You should be able to find a link to Data Manager
information on the product introduction page of this
product. If you cannot find such a link, use the search
form of the area site where you are located to enter the
model name of this product and search for it.
• Note that site contents are subject to change without
notice.

4. Check if your computer system complies with
the minimum requirements for Data Manager.

5. Download Data Manager and its user’s guide to
your computer.

6. Follow the procedure in the user’s guide that
you downloaded in step 5 to install and use
Data Manager.
• You can download accompaniment data from the
Internet Data Expansion system of the CASIO MUSIC
SITE (http://music.casio.com/) and load it into the
memory of this Digital Piano. Note that there is not any
accompaniment data intended specifically for this
model, so you should use data for other models.

EN-67

English

Connecting External Devices

CDP230R_e.book

68 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Connecting External Devices

Connecting to Audio Equipment
This Digital Piano can be connected to commercially available
stereo, amplifier, or recording equipment, to a portable audio
player or other equipment.

Outputting Digital Piano Notes to Audio
Equipment
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
standard plug on one end and a plug that matches the
configuration of the external device on the other end.

• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the Digital Piano and then the
external device.
• If Digital Piano notes sound distorted when they are
sounded from external audio equipment, lower the
Digital Piano’s volume setting.
Stereo standard plug

Audio equipment, amplifier,
etc.

PHONES/OUTPUT jack

Playing an External Device from the Digital
Piano
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
mini plug on one end and a plug that matches the
configuration of the external device on the other end.

• Turn off the Digital Piano when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the external device and then
the Digital Piano.
• If notes are distorted when they are sounded on the
external device, lower the volume setting of the
external device.
Stereo mini plug

Portable audio player, etc.

AUDIO IN jack

EN-68

CDP230R_e.book

69 ページ

２０１４年２月１９日 水曜日 午後５時１１分

English

Reference
Troubleshooting
Symptom

Action

Included Accessories
I can’t find something that should be here.

Carefully check inside all of the packing materials.

Power Requirements
Power will not turned on.

Correctly attach the AC adaptor (page EN-9).

The display lights up momentarily but power does
not turn on when I press the P (POWER) button
( ).

Press

2 firmly and completely to turn on power.

Display
On-screen keyboard keys or notes remain on the
display.

A Step Up Lesson is in progress and the Digital Piano is waiting for
you to play the next note in the song. To stop this from happening,
cancel the lesson (page EN-32).

Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.
Sound
Nothing happens when I press any keyboard key.

• Adjust the volume setting (page EN-10).
• If there is no sampled sound in memory, nothing will play if you
press a keyboard key while a tone in the range of 701 to 705 is
selected (page EN-19).

Nothing happens or notes do not play normally when
I play notes on the left side of the keyboard.

Press
to disable chord input in the accompaniment keyboard area
(page EN-38).

Nothing happens when I start an Auto
Accompaniment.

• With rhythms 191 to 200, nothing will sound until you play a chord
on the keyboard. Try playing a chord (page EN-38).
• Check and adjust the accompaniment volume setting (page
EN-41).
• If there is no user rhythm stored in memory, Auto Accompaniment
while a rhythm in the range of 201
will not start when you press
to 210 is selected (page EN-44).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-10).

Nothing happens when I start playback of a built-in
song.

• It takes a little time after you press the button until the song starts to
play. Wait for a moment for the song to start.
• Check and adjust the song volume (page EN-28).
• If there is no user song stored in memory, song playback will not
while a song in the range of 153 to 162 is
start when you press
selected (page EN-29).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-10).

The metronome does not sound.

• Check and adjust the accompaniment volume setting (page
EN-41).
• Check and adjust the song volume (page EN-28).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-10).

Notes keep sounding, without stopping.

Turn power off and then back on to initialize all Digital Piano settings
(page EN-10).

Some notes are cut off while they are playing.

Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones).
This does not indicate malfunction.

The volume or tone setting I made has changed.

• Adjust the volume setting (page EN-10).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-10).

EN-69

CDP230R_e.book

70 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Reference
Symptom

Action

Output volume does not change even though is
change my keyboard touch.

• Change the Touch Response setting (page EN-11).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-10).

This is due to system limitations. It does not indicate malfunction.
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges.
With some tones, octaves do not change at the far
ends of the keyboard.

This is due to system limitations. It does not indicate malfunction.

The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.

• Check and adjust the transpose (page EN-16) and tuning settings
(page EN-16).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-10).

The reverb of notes seems to change suddenly.

• Check and adjust the reverb setting (page EN-15).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-10).

Operation
When I perform a skip forward or skip back
operation, the skip operation moves multiple song
measures instead of only a single measure.

While song playback is stopped or a Step Up Lesson is in progress,
skip forward and skip back operations are performed in phrase units
(page EN-27).

Tone, rhythm, and other settings revert to their initial
defaults whenever you turn on the Digital Piano.

Though Digital Piano settings reset when you turn off the Digital
Piano, you can save setups to registration memory for instant recall
whenever you need them (page EN-47).

Computer Connection
I can’t exchange data between the Digital Piano and
a computer.

EN-70

• Check to make sure that the USB cable is connected to the Digital
Piano and computer, and that the device is selected correctly with
your computer’s music software settings (page EN-64).
• Turn off the Digital Piano and then exit the music software on your
computer. Next, turn the Digital Piano back on and then restart the
music software on your computer.

CDP230R_e.book

71 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Reference

Model
Keyboard
Touch Response
Maximum Polyphony

English

Specifications
CDP-230RBK/CDP-230RSR
88-key piano keyboard
3 types, Off
48 notes (24 for certain tones)

Tones
Built-in Tones

700

Sampling Tones

Up to 8 (Melody Sampling: 5, Drum Sampling: 3)*
Up to 10 seconds

Functions

Layer, Split, Piano/Organ button

Hall

On, Off

Reverb

1 to 10, Off

Chorus

1 to 5, Off

Metronome
Beats per Measure

0, 1 to 9

Tempo Range

30 to 255

Song Bank
Built-in Songs

152

User Songs

Up to 10*

Step Up Lesson
Lessons

4 (Listen, Watch, Remember, Auto)

Lesson Part

L, R, LR

Functions
Music Challenge

Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation
20 notes

Auto Accompaniment
Built-in Rhythms

200

User Rhythms

Up to 10 (Accompaniment Edit)*

Chord Book Function

Chord Guide

Registration

32 (4 setups × 8 banks)

Recorder

Real-time recording, playback

Keyboard Play

5 songs, 6 tracks

Playing Along with a
Built-in Songs

1 song (L, R, LR)

Memory Capacity

Approximately 12,000 notes (total for 6 songs)

Other Functions
Transpose

±1 octaves (–12 to +12 semitones)

Octave Shift

Upper/Lower ±2 octaves

Tuning

A4 = 415.5 to 465.9 Hz (Initial Default: 440.0 Hz)

Preset Scales

Music Preset

305

One Touch Preset

200

Auto Harmonize

12 types

Arpeggiator

90 types

MIDI

16 multi-timbre received, GM Level 1 standard

Musical Information Function

Tone, Rhythm, Song Bank numbers and names, staff notation, fingering, pedal operation,
tempo, measure and beat number, chord name, etc.

Pitch Bend Wheel
Pitch Bend Range

0 to 12 semitones

Memory Cards
Supported Memory Cards

SD or SDHC memory cards, 32GB or less

Functions

SMF playback, file storage, file recall, file delete, card format

EN-71

CDP230R_e.book

72 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Reference
Inputs/Outputs
USB port

TYPE B

Sustain/Assignable jack

Standard jack (sustain, sostenuto, soft, rhythm)

Phones/Output jack

Stereo standard jack
Output Impedance: 3Ω, Output Voltage: 1.5V (RMS) MAX

Audio In jack

Stereo mini jack
Input Impedance: 40kΩ, Input Sensitivity: 200mV

Mic In/Sampling jack

Standard jack
Input Impedance: 3kΩ, Input Sensitivity: 10mV

Power Jack

12V DC

Power Supply
AC Adaptor
Auto Power Off
Speakers
Output
Power Consumption

AD-A12150LW
• The AC adaptor can be used safely in areas up to 4,000 meters above sea level.
30 minutes after last key operation
(12cm × 6cm oval) × 2
8W + 8W
12V = 18W

Dimensions

132.2 × 28.6 × 12.9cm (52 1/16 × 11 1/4 × 5 1/16 inch)

Weight

Approximately 11.3kg (24.9 lbs)

• Design and specifications are subject to change without notice.
* This data is stored in a shared memory area with a total capacity of approximately 320Kbytes (1Kbyte = 1,024bytes).

Operating Precautions
Be sure to read and observe the following operating precautions.

■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of the product, but interference from the product can cause audio or video
interference of a nearby device.

■ User Maintenance
• Never use benzine, alcohol, thinner, or other chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.
Wring all excess moisture from the cloth before wiping.

■ Included and Optional Accessories
Use only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric
shock, and personal injury.

■ Weld Lines
Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not
cracks or scratches.

■ Musical Instrument Etiquette
Always be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the
volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using
headphones.

EN-72

CDP230R_e.book

73 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Reference

Display
Message

Cause

Action

Err CardFull

There is not enough room available on the memory
card.

Err Card R/W

The memory card is damaged.

Use a different memory card.

Err Convert

There is not enough unused memory available to save
recorded song data to a memory card as an SMF 0
format file.

Delete some or all of the following user data from memory
to make room for new data.
Sampled sounds (page EN-18), user rhythms (page
EN-44), user songs (page EN-29)

Err Exist

A sampled drum set sound cannot be copied (page
EN-23) to a keyboard key because the key already has
a sampled sound assigned to it.

• Delete the sampled sound that is currently assigned to
the key you are copying to (page EN-23).
• Copy the sampled sound to another key that does not
yet have a sampled sound assigned to it.

Err Format

1. The format of the memory card is not compatible
with this Digital Piano.

1. Format the memory card (page EN-59).

2. The memory card is damaged.

2. Use a different memory card.

3. You are trying to use an SDXC card.

3. SDXC cards are not supported. Use an SD or SDHC
memory card.

Err Limit

The tone number you selected before starting sampling
already has the allowable maximum of eight sampled
sounds assigned to it.

• Delete the one or more of the sampled sounds
currently assigned to the tone number (page EN-23).
• Select another tone number that has less than eight
sampled sounds currently assigned to it (page EN-21).

Err Mem Full

1. There is not enough memory available to play back
song data from a memory card.

Delete some or all of the following user data from memory
to make room for new data.
Sampled sounds (page EN-18), user rhythms (page
EN-44), user songs (page EN-29)

2. There is not enough memory available for sampling
or Auto Accompaniment editing.
Err No Card

• Delete some of the files on the memory card to make
room for new data (page EN-62).
• Use a different memory card.

1. The memory card is not set correctly in the card slot. 1. Remove the memory card and reinsert it correctly
(page EN-59).
2. The memory card was removed part way through a
card access operation.

2. Never remove a memory card from the card slot while
a card access operation is in progress.

Err No Data

There is no data in the selected user area (tone,
rhythm, song number, etc.)

Select a Digital Piano user area that contains data.

Err No File

There is no folder named “MUSICDAT” on the memory
card.

• Use a computer to create a folder named “MUSICDAT”
on the memory card (page EN-61).
• Format the memory card on the Digital Piano (page
EN-59).

Err NotSMF01

You are attempting to play back SMF Format 2 song
data.

Playback of SMF Format 0 or 1 only is supported.

Err Protect

1. The memory card is write protected.

1. Adjust the memory card’s write protect switch to
enable data storage.

2. Sampled sounds (Tone Numbers 701 to 708) are
protected.

2. Unprotect one or more of the sampled sounds, which
will allow it to be overwritten or deleted.

Err ReadOnly

You are attempting to save a file using the same name
as an existing read-only file.

• Save the new file to a different card or use another
name.
• Remove the read-only attribute of the exiting file on the
memory card and try again.
• Use a different memory card.

Err SizeOver

1. The song data on the memory it too big to play back. 1. This Digital Piano can play back song data files with a
maximum size of about 320Kbytes.

Err WrongDat

2. Auto Accompaniment editing cannot be performed
because the accompaniment pattern or instrument
part data is too large.

2. Select a different accompaniment pattern or
instrument parts.

1. The data on the memory card is corrupted.

—

2. The data on the memory card is a type that is not
supported by this Digital Piano.

EN-73

English

Error Messages

CDP230R_e.book

74 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Reference

Song List
SONG BANK
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055

EN-74

WORLD
TWINKLE TWINKLE LITTLE STAR
LIGHTLY ROW
LONG LONG AGO
ON TOP OF OLD SMOKEY
SAKURA SAKURA
WHEN THE SAINTS GO MARCHING IN
AMAZING GRACE
AULD LANG SYNE
COME BIRDS
DID YOU EVER SEE A LASSIE?
MICHAEL ROW THE BOAT ASHORE
DANNY BOY
MY BONNIE
HOME SWEET HOME
AURA LEE
HOME ON THE RANGE
ALOHA OE
SANTA LUCIA
FURUSATO
GREENSLEEVES
JOSHUA FOUGHT THE BATTLE OF JERICHO
THE MUFFIN MAN
LONDON BRIDGE
UNDER THE SPREADING CHESTNUT TREE
SIPPIN’ CIDER THROUGH A STRAW
GRANDFATHER’S CLOCK
ANNIE LAURIE
BEAUTIFUL DREAMER
IF YOU’RE HAPPY AND YOU KNOW IT, CLAP YOUR
HANDS
MY DARLING CLEMENTINE
LITTLE BROWN JUG
HOUSE OF THE RISING SUN
SHE WORE A YELLOW RIBBON
YANKEE DOODLE
MY OLD KENTUCKY HOME
SZLA DZIEWECZKA
TROIKA
WALTZING MATILDA
ON THE BRIDGE OF AVIGNON
I’VE BEEN WORKING ON THE RAILROAD
OH! SUSANNA
CAMPTOWN RACES
JEANNIE WITH THE LIGHT BROWN HAIR
TURKEY IN THE STRAW
JAMAICA FAREWELL
EVENT
SILENT NIGHT
WE WISH YOU A MERRY CHRISTMAS
JINGLE BELLS
JOY TO THE WORLD
O CHRISTMAS TREE
PIANO/CLASSICS
MARY HAD A LITTLE LAMB
LE CYGNE FROM “LE CARNAVAL DES ANIMAUX”
JE TE VEUX
SONATA op.13 “PATHÉTIQUE” 2nd Mov.
HEIDENRÖSLEIN

056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078

AIR FROM “SUITE no.3”
SPRING FROM “THE FOUR SEASONS”
HABANERA FROM “CARMEN”
BRINDISI FROM “LA TRAVIATA”
HUNGARIAN DANCES no.5
MINUET IN G MAJOR
MUSETTE IN D MAJOR
GAVOTTE (GOSSEC)
ARABESQUE (BURGMÜLLER)
CHOPSTICKS
DECK THE HALL
ODE TO JOY
AVE MARIA (GOUNOD)
SONATINA op.36 no.1 1st Mov.
PRELUDE op.28 no.7 (CHOPIN)
RÊVERIE
GYMNOPÉDIES no.1
GOING HOME FROM “FROM THE NEW WORLD”
FÜR ELISE
TURKISH MARCH (MOZART)
SONATA op.27 no.2 “MOONLIGHT” 1st Mov.
ETUDE op.10 no.3 “CHANSON DE L’ADIEU”
THE ENTERTAINER
WEDDING MARCH FROM “MIDSUMMER NIGHT’S
079
DREAM”
080
AMERICAN PATROL
081
FRÖHLICHER LANDMANN
082
LA CHEVALERESQUE
083
SONATA K.545 1st Mov.
084
LA PRIÈRE D’UNE VIERGE
085
VALSE op.64 no.1 “PETIT CHIEN”
086
LIEBESTRÄUME no.3
087
JESUS BLEIBET MEINE FREUDE
088
CANON (PACHELBEL)
089
SERENADE FROM “EINE KLEINE NACHTMUSIK”
090
MARCH FROM “THE NUTCRACKER”
091
INVENTIONEN no.1
092
PRAELUDIUM no.1 (J.S.BACH)
093
SONATINE op.20 no.1 1st Mov.
094
HUMORESKE (DVO ÁK)
095
DOLLY’S DREAMING AND AWAKENING
096
LA FILLE AUX CHEVEUX DE LIN
097
ARABESQUE no.1 (DEBUSSY)
098
TRÄUMEREI
099
MAPLE LEAF RAG
100
NOCTURNE op.9 no.2 (CHOPIN)
EXERCISE
101 - 150 EXERCISE I / II / III
DEMO TUNES
151 - 152 DEMO TUNES
USER SONGS
153 - 162 USER SONGS

CDP230R_e.book

75 ページ

２０１４年２月１９日 水曜日 午後５時１１分

Reference

Fingered 1, Fingered 2 Chords

Fingered 3, Full Range Chords
In addition to the chords that can be fingered with Fingered 1
and Fingered 2, the following chords also are recognized.

#
C
C

Gm Am
C
C

D
C

E
C

F
C

b
Bm
C

G
C

Ddim
C

b
A
C

b
B
C

b
A7
C

B
C

F7
C

#
Cm
C

Fm7
C

Dm
C

Gm7
C

Fm
C

b
A add9
C

Cdim
Caug *3
Csus4 *3
Csus2 *3

• With Fingered 3, the lowest note fingered is interpreted as
the base note. Inverted forms are not supported.
• With Full Range Chord, when the lowest note fingered is a
certain distance from the neighboring note, the chord is
interpreted as a fraction chord.
• Unlike Fingered 1, 2, and 3, Full Range Chord requires
pressing of at least three keys to form a chord.

C7
Cm7 *3
CM7
Cm7b5 *3
C7b5 *3
C7sus4
Cadd9
Cmadd9
CmM7
Cdim7 *3
C69 *3
C6 *1 *3
Cm6 *2 *3
*1 With Fingered 2, interpreted as Am7.
*2 With Fingered 2, interpreted as Am7b5.
*3 Inverted form not supported in some cases.

EN-75

English

Fingering Guide

Key’s
Ch’s

After
Touch

Control
Change

Pitch Bender

Note ON
Note OFF

Velocity

True voice

O (MSB only)
O
O *2
O
O
O
O

O
O

O
X
O *2
O
O
X
O *3

O *3
O *3
66
67

X
O

O 9nH v = 1 - 127
X 9nH v = 0, 8nH v =**

0 - 127
0 - 127 *1

0, 32
1
6, 38
7
10
11
64

X
X

O 9nH v = 1 - 127
X 9nH v = 0

0 - 127

Mode 3
X

Default
Messages
Altered

Mode

Note
Number

1 - 16
1 - 16

1
1 - 16

Recognized

Default
Changed

Transmitted

Basic
Channel

Function

MIDI Implementation Chart

Sostenuto
Soft pedal

Bank select
Modulation
Data entry
Volume
Pan
Expression
Hold 1

**: no relation
**: sin relación

Remarks

Version : 1.0

76 ページ

Model: CDP-230R

CDP230R_e.book
２０１４年２月１９日 水曜日 午後５時１１分

CDP230R_es_Cover1-4.fm

2 ページ

２０１４年２月１９日 水曜日 午後５時１３分

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

O : Yes
X : No
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY

X
O
X
O
X
X
: All sound OFF
: Reset all controller
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
Aux
Messages

O
O
: Clock
: Commands
System
Real Time

X
X
X
: Song Pos
: Song Sel
: Tune
System
Common

O *2
:True #

Key’s
Ch’s

After
Touch

Pitch Bender

Note ON
Note OFF
Velocity

True voice

Note
Number

Program
Change

Default
Messages
Altered
Mode

Function

Model: CDP-230R

FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

System Exclusive

O *3
O *3
X
O
O *2
66
67
91
93
100, 101

Default
Changed

Basic
Channel

NOTICE

Control
Change

X
X

1
1 - 16

O 0 - 127

O
X
O *2
O
O
X
O *3
0, 32
1
6, 38
7
10
11
64

0 - 127

Mode 3
X

Transmitted

Declaration of Conformity

O 9nH v = 1 - 127
X 9nH v = 0

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.

Remarks

O
O
X
O
O
X

X
X

X
X
X

O *2

O 0 - 127

O (MSB only)
O
O *2
O
O
O
O

X
O

0 - 127
0 - 127 *1

Mode 3
X

1 - 16
1 - 16

Recognized

O
O
O
O
O *2

O 9nH v = 1 - 127
X 9nH v = 0, 8nH v =**

Bank select
Modulation
Data entry
Volume
Pan
Expression
Hold 1

Remarks

Version : 1.0

Sostenuto
Soft pedal
Reverb send *4
Chorus send
RPN LSB, MSB

IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.

２０１４年２月１９日 水曜日 午後５時１３分

CDP-230R
USER’S GUIDE

EN/ES

English

1 ページ

Please keep all information for future reference.
Safety Precautions
Before trying to use the Digital Piano, be sure to read
the separate “Safety Precautions”.

MA1402-B Printed in China

CDP230-ES-1B

Español

CDP230R_es_Cover1-4.fm

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Trapped                         : False
Create Date                     : 2008:02:19 12:31:47Z
Creator Tool                    : FrameMaker 7.1
Modify Date                     : 2014:03:25 20:09:07+09:00
Metadata Date                   : 2014:03:25 20:09:07+09:00
Format                          : application/pdf
Title                           : CDP230R_EN
Creator                         : CASIO COMPUTER CO., LTD.
Document ID                     : uuid:a37b7656-ef07-49f7-b540-fcfbcf05cfe9
Instance ID                     : uuid:7a47fe49-bde4-4ee9-878d-42c218565f27
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Has XFA                         : No
Page Count                      : 80
Page Layout                     : OneColumn
Author                          : CASIO COMPUTER CO., LTD.

EXIF Metadata provided by EXIF.tools

Casio Cdp 230R Owners Manual CDP230R_EN

Web_CDP230-ES-1B Web_CDP230-ES-1B_EN CDP-230R | Electronic Musical Instruments | Manuals | CASIO

Navigation menu

Versions of this User Manual:

Views

Navigation