CastleNet Technology ASW915N ADSL2/2+ 11n Wireless Router User Manual ASW915N M505N UserMan 20090908
CastleNet Technology Inc. ADSL2/2+ 11n Wireless Router ASW915N M505N UserMan 20090908
ASW915N M505N UserMan 20090908
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1166367 |
| Application ID | axZdWK+MPrPTJQup/haLFQ== |
| Document Description | ASW915N M505N UserMan 20090908 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 200.93kB (2511673 bits) |
| Date Submitted | 2009-09-09 00:00:00 |
| Date Available | 2009-09-10 00:00:00 |
| Creation Date | 2009-07-22 19:11:18 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2009-09-08 14:25:51 |
| Document Title | ASW915N M505N UserMan 20090908 |
| Document Creator | Acrobat PDFMaker 7.0 for Word |
| Document Author: | Rosena |
ADSL2/2+ 11N WiFi Router User’s Manual ADSL2/2+ 4 Ports Switch 11N WiFi Router Freeway DSL User’s Manual Rev. 1.0 May. 2009 ADSL2/2+ 11N WiFi Router User’s Manual Table of Contents 1. INTRODUCTION......................................................................................................................... 1 1.1 1.2 2. GENERAL FEATURES .............................................................................................................. 1 SYSTEM REQUIREMENT .......................................................................................................... 1 FREEWAY DSL OVERVIEW.................................................................................................... 2 2.1 2.2 2.3 LED DESCRIPTION ................................................................................................................. 2 PORTS AND BUTTONS ............................................................................................................. 3 INSTALLING YOUR FREEWAY DSL ......................................................................................... 3 3. CONFIGURING TCP/IP ............................................................................................................. 4 4. 5.1 LOGIN TO YOUR FREEWAY DSL.................................................................................... 5 5. DEVICE INFO .............................................................................................................................. 6 5.1 5.2 5.3 5.3.1 5.3.2 5.3.3 5.3.4 5.4 5.5 5.6 6. SUMMARY .............................................................................................................................. 6 WAN ..................................................................................................................................... 6 STATISTICS ............................................................................................................................. 7 LAN................................................................................................................................... 7 WAN Service ..................................................................................................................... 7 xTM................................................................................................................................... 7 xDSL ................................................................................................................................. 8 ROUTE .................................................................................................................................... 9 ARP ....................................................................................................................................... 9 DHCP .................................................................................................................................... 9 ADVANCED SETUP.................................................................................................................. 10 6.1 LAYER2 INTERFACE-ATM INTERFACE................................................................................. 10 6.2 WAN SERVICE ..................................................................................................................... 11 6.3 LAN..................................................................................................................................... 16 6.4 NAT..................................................................................................................................... 17 6.4.1 Virtual Servers................................................................................................................ 17 6.4.2 Port Triggering............................................................................................................... 19 6.4.3 DMZ Host ....................................................................................................................... 20 6.5 SECURITY – IP FILTERING .................................................................................................... 21 6.5.1 Outgoing ......................................................................................................................... 21 6.5.2 Incoming ......................................................................................................................... 22 6.6 PARENTAL CONTROL ........................................................................................................... 23 6.6.1 Time Restriction.............................................................................................................. 23 6.6.2 URL Filter....................................................................................................................... 24 6.7 QUALITY OF SERVICE ........................................................................................................... 25 6.7.1 Queue Config.................................................................................................................. 26 6.7.2 QoS Classification .......................................................................................................... 27 6.8 ROUTING .............................................................................................................................. 28 6.8.1 Default Gateway ............................................................................................................. 28 6.8.2 Static Route..................................................................................................................... 28 6.8.3 RIP.................................................................................................................................. 29 6.9 DNS..................................................................................................................................... 29 6.9.1 DNS Server .....................................................................................................................29 6.9.2 Dynamic DNS (DDNS) ................................................................................................... 30 6.10 DSL ..................................................................................................................................... 31 6.11 UPNP ................................................................................................................................... 32 6.12 DNS PROXY ......................................................................................................................... 32 6.13 USB STORAGE ..................................................................................................................... 32 6.14 PRINT SERVER ...................................................................................................................... 33 6.15 INTERFACE GROUPING ......................................................................................................... 34 6.16 LAN PORTS.......................................................................................................................... 36 6.17 IPSEC ................................................................................................................................... 36 6.18 CERTIFICATE ........................................................................................................................ 38 6.18.1 Local .......................................................................................................................... 38 ADSL2/2+ 11N WiFi Router User’s Manual 6.18.2 7. Trusted CA ................................................................................................................. 40 WIRELESS.................................................................................................................................. 41 7.1 7.2 7.3 7.4 7.5 7.6 BASIC ................................................................................................................................... 41 SECURITY ............................................................................................................................. 42 MAC FILTER ........................................................................................................................ 45 WIRELESS BRIDGE ............................................................................................................... 46 ADVANCED .......................................................................................................................... 47 STATION INFO ...................................................................................................................... 49 8. DIAGNOSTICS........................................................................................................................... 50 9. MANAGEMENT ........................................................................................................................ 51 9.1 9.1.1 9.1.2 9.1.3 9.2 9.2.1 9.2.2 9.3 9.4 9.5 9.6 9.6.1 9.6.2 9.7 9.8 10. SETTINGS ............................................................................................................................. 51 Backup ............................................................................................................................ 51 Update ............................................................................................................................ 51 Restore Default ...............................................................................................................51 SYSTEM LOG ........................................................................................................................ 52 Configure System Log..................................................................................................... 52 View System Log............................................................................................................. 53 SNMP AGENT ...................................................................................................................... 53 TR-069 CLIENT .................................................................................................................... 54 INTERNET TIME .................................................................................................................... 55 ACCESS CONTROL ................................................................................................................ 55 Passwords....................................................................................................................... 55 Services........................................................................................................................... 56 UPDATE SOFTWARE ............................................................................................................. 56 REBOOT................................................................................................................................ 57 WALL MOUNTING (OPTIONAL) ..................................................................................... 58 APPENDIX A. TROUBLESHOOTING ............................................................................................59 APPENDIX B. SPECIFICATIONS .................................................................................................... 61 ADSL2/2+ 11N WiFi Router User’s Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. ADSL2/2+ 11N WiFi Router User’s Manual 1. Introduction The Freeway DSL is a highly integrated device which enables ADSL2+, 11N WLAN, Router, Switch,] and File server together. It is positioned to enhance the user's triple play broadband experience with excellent QoS (Quality of Service) and traffic management. This new generation of platforms not only eases the deployment of DSL-based ADSL2+ but also provides new opportunities for the service provider to derive additional value from the emerging IP Video service. The Draft 2.0 IEEE802.11N solution of Freeway DSL can take advantage of the high throughput and extended range with MIMO core technology. Freeway DSL adopts the easyto-use web-GUI management interface. Its user friendly interface will amaze you with total difference experience. Freeway DSL also supports SNMP agent and TR-069 which enable central management from the central offices and benefit the ISP much. 1.1 General Features y Comply with ITU ADSL, ADSL 2 and ADSL2+ standards y Compliant to DSL Forum TR-048, TR-067 and TR-100 Interoperability Test y Feature-Rich TR-069 supports Remote Registration / Remote Authentication / Remote Configuration y Complete solution for integration of ADSL, Router, Switch, and 11N Draft 2.0 WLAN y Advanced MIMO technology provides enhanced wireless speed/range and wide coverage area y WPS support for easy WLAN client setup y Easily expands network coverage using compatible WDS-enabled AP y Improves on the experience of user for audio, video and voice applications by QoS configuration y Easy to use file server for mass storage file sharing y Security supports WPA/WPA2-PSK, & 64/128-bit WEP Encryption y Remote / Local configuration & management through Web / Telnet configuration & management y Three levels access account management y Support Universal Plug and Play (UPnP) y Device management access control based on source IP addresses and incoming interfaces 1.2 System Requirement In order to use the Freeway DSL, you must have the following: y ADSL service up and running on your telephone line, with at least one public Internet address for your LAN y One or more computers each containing an Ethernet network interface card (NIC) and/or a single computer with a USB port y An Ethernet hub/switch, if you are connecting the device to more than one computer on an Ethernet network y For system configuration using the supplied web-based program: a web browser such as Internet Explorer v5.0 or later, Firefox v2.0 or later, or Netscape v6.1 or later ADSL2/2+ 11N WiFi Router User’s Manual 2. Freeway DSL Overview 2.1 LED Description The front panel contains lights called LEDs that indicate the status of the Freeway DSL. LED POWER WPS Color Green Red Green Red Status On Off On On On On LAN1-4 Green WLAN Green USB Green Blinking Off On Blinking Off On Blinking Off On DSL Green Green Internet Red Slow Blinking Fast Blinking Off On Blinking Off On Description The device is power on. The device is power off. The device is booting up. The WPS is in progress and success status. The WPS encounters problem or session overlap. The LAN port is connected to a power-on Ethernet device. The data is sending/receiving via LAN port. The LAN port is not connected to any Ethernet device. The wireless feature is enabled. The IAD is sending/receiving wirelessly. The wireless feature is disabled. A powered device has connected to the USB port. The data is sending/receiving via USB port. No powered device has connected to the USB port. The device is successfully linked with ADSL headend. The device is trying to link with ADSL head-end. The device is handshaking with the ADSL head-end. The device is not linked with ADSL head-end. The device is successfully connected to the Internet. The device is sending/receiving data via the Internet. The device is not connected to the Internet. The device is failed to authenticate with the ISP due to username or password error. ADSL2/2+ 11N WiFi Router User’s Manual 2.2 Ports and Buttons The rear panel contains the ports for the Freeway DSL's data and power connections. 1. ON/OFF: Power switch to power on/off the Freeway DSL. 2. POWER: Connecter for a power adapter. Using a power supply with a different voltage rating will damage this product. Make sure to observe the proper power requirements. The requirement of adapter is 12V/1A. 3. USB: Connects for USB supported printer or USB mass storage. 4. LAN1-4: Connectors for Ethernet network devices, such as a PC, hub, switch or router. 5. DSL: Connecter for accessing the Internet through ADSL line. 6. Reset: Restore the default settings. You may need to restore the Freeway DSL to its factory defaults if the configuration is changed, you loose the ability to enter the Freeway DSL via the web interface, or following a software upgrade, and you loose the ability to enter the Freeway DSL. To reset the Freeway DSL, simply press the reset button for more than 8 seconds. The Freeway DSL will be reset to its factory defaults. The reboot process will take a about 30 seconds and the Freeway DSL will become operational again. 2.3 Installing your Freeway DSL 1. 2. 3. Locate an optimum location for the Freeway DSL. For connections to the Ethernet and DSL interfaces, refer to the Quick Start Guide. Connect the Power Adapter. Depending upon the type of network, you may want to put the power supply on an uninterruptible supply. Use only the power adapter supplied with the Freeway DSL. A different adapter may damage the product. ADSL2/2+ 11N WiFi Router User’s Manual 3. Configuring TCP/IP This section will help you to establish a connection between a PC and the Freeway DSL. Each computer that will be part of your network needs to communicate with the Freeway DSL. To do this, you may need to configure each PC’s network settings to automatically obtain an IP address. This configuration assumes you have retained the default interface for Windows XP. If you are running the ‘Classic’ interface, please follow the instructions for Windows XP. 1. Select Start > Settings > Control Panel. 2. Double-click Network and Dial-Up Connections. 3. Double-click the Local Area Connection appropriate for your Ethernet adapter. 4. Click Properties. The Local Area Properties window is displayed. 5. Ensure the box next to Internet Protocol (TCP/IP) is selected. 6. Click to highlight Internet Protocol (TCP/IP) and click Properties. The Internet Protocol (TCP/IP) Properties window is displayed. 7. Select Obtain an IP address automatically if you are connecting the Freeway DSL to the PC via Ethernet. Otherwise, select Use the following IP address and specify an IP address within the subnet such as 192.168.1.5 (assuming the IP address of the Freeway DSL is 192.168.1.1) if you are connecting the Freeway DSL to the PC via USB. 8. Click OK twice to exit and save your settings. ADSL2/2+ 11N WiFi Router User’s Manual 4. 5.1 Login to Your Freeway DSL This section guides you through configuring your Freeway DSL. You should have your computers configured for DHCP mode and have proxies disabled on your browser. If you do not get the page as shown below, you may need to delete your temporary Internet files by flushing the cached web pages. Follow the procedures below to login to your Freeway DSL. 1. Open your web browser. Type the default IP address of the Freeway DSL http://192.168.1.1 and press Enter. The Log In page appears. 2. Enter user name as admin and password as admin (case sensitive). 3. Click OK. The main page appears. Note There are two default user name and password combinations. The user / user name and password combination allow you to view the device status, but you cannot change or save configurations. The admin / admin combination allows you to perform all functions. Passwords can be changed at any time. You can change the password in Management->Access Control->Passwords page at any time. This web page layout of Freeway DSL is shown as below. ADSL2/2+ 11N WiFi Router User’s Manual 5. Device Info This is the first page you see when entering the Web Application. 5.1 Summary This page shows the status summary of the Freeway DSL. 5.2 WAN This page shows the WAN information of Freeway DSL. ADSL2/2+ 11N WiFi Router User’s Manual 5.3 Statistics This section shows the statistics information of Freeway. 5.3.1 LAN This page shows the statistics of each connection on your LAN. 5.3.2 WAN Service This page shows the WAN statistics information. 5.3.3 xTM This page shows the xTM interface statistics information. ADSL2/2+ 11N WiFi Router User’s Manual 5.3.4 xDSL This page shows the DSL status and statistics. ADSL2/2+ 11N WiFi Router User’s Manual 5.4 Route This page shows the IP route for Freeway DSL. 5.5 ARP This page shows the ARP (Address Resolution Protocol) table on Freeway DSL. 5.6 DHCP This page shows the client devices which are assigned IP addresses by the Freeway DSL. ADSL2/2+ 11N WiFi Router User’s Manual 6. Advanced Setup This section allows you to make specific configurations to your Freeway DSL such as NAT, Quality of Service, DNS and so on. 6.1 Layer2 Interface-ATM Interface This page shows the summary of the current ATM interfaces you have configured. You can set up more than one connection profiles on your Freeway DSL. Click Add to create ATM interface. Enter the information provided by your ISP and then click Save/Apply. 10 ADSL2/2+ 11N WiFi Router User’s Manual Field VPI/VCI DSL Link Type Encapsulation Mode Service Category Connection Mode Enable Quality of Service Description Enter the PVC identifier (VPI and VCI) provided by your ISP. Select the DSL link type for the connection. Your ISP should inform you which type to use. Select the encapsulation mode for the connection. Your ISP should inform you which mode to use. Select the encapsulation mode for the connection. If you are not sure which type to select, just use the default type. Select the connection mode according to your application. Check to enable QoS feature. It improves the performance for selected classes of applications. 6.2 WAN Service This page shows the summary of the WAN service for a selected interface. Click Add to configure WAN service. Select an interface from the drop-down list and click Next. 11 ADSL2/2+ 11N WiFi Router User’s Manual Select a WAN service type and enter a service description for this connection. Different mode will lead you to different configuration page. Click Next. PPP over Ethernet (PPPoE) Mode Field PPP Username PPP Password PPPoE Service Name Description Enter the username of your PPP account. Enter the password of your PPP account Enter the service name if required by the ISP. 12 ADSL2/2+ 11N WiFi Router User’s Manual Authentication Method Enable Fullcone NAT Dial on Demand Inactivity Timeout (minutes) PPP IP Extension Use Static IPv4 Address Enable PPP Debug Mode Bridge PPPoE frames Between WAN and Local Ports IGMP Multicast Select the authentication method to be PAP, CHAP or MSCHAP. Select “Auto” to allow the Freeway DSL to negotiate with PPP server automatically. Check to enable fullcone NAT feature. Check to enable DOD feature. Specify the inactivity timeout (in minute) for DOD feature. Check to enable PPP IP extension. Check and enter the static IPv4 address. Check to enable PPP debug mode. Check to enable the PPPoE fames bridging between WAN and Local Ports. Check to enable IGMP multicasting. IP over Ethernet (MER) Mode Field Obtain an IP Address Automatically Option 60 Vendor ID Option 61 IAID Option 61 DUID Option 125 User the following Static IP Address Description Select and select your preferred WAN interface from drop-down list. This allows the Freeway DSL to obtain the DNS server information automatically. Your ISP will assign the Vendor Class IDentifier automatically. This option can be used by DHCP clients to identify the vendor and functionality of a DHCP client. Your ISP will assign the IAID (Identity Association IDentifier) automatically. Your ISP will assign the DUID (DHCP Unique IDentifier)) automatically. Select this item (Vendor-Identifying Vendor-Specific) to tell the Freeway DSL which firmware it has to download. Select this mode and enter the static IP address, subnet mask and gateway IP address provided by your ISP. 13 ADSL2/2+ 11N WiFi Router User’s Manual Select a WAN interface as Freeway DSL default gateway. Click Next. Field Obtain DNS Info from a WAN Use the Following Static DNS IP Address Primary DNS Sever Secondary DNS Sever Description Select the WAN interface to obtain the DSN info. Select to configure the static DNS IP address manually. Enter the IP address of primary DNS server. (Optional) Enter the IP address of secondary DNS server. 14 ADSL2/2+ 11N WiFi Router User’s Manual The table below shows the summary of your WAN settings. Make sure they match the settings provided by your ISP so that you can connect to the Internet. 15 ADSL2/2+ 11N WiFi Router User’s Manual 6.3 LAN This page shows the current setting of LAN interface. You can set IP address/subnet mask and DHCP server pool for the LAN interface. Field Group Name IP Address Subnet Mask Enable IGMP Snooping Enable LAN Side Firewall DHCP Server Start/End IP Address Leased Time (hour) Description Select a group name for this LAN. Enter the IP address for this LAN. Enter the subnet mask for this LAN. Check to enable IGMP Snooping and select the mode to be Standard or Blocking. Check to enable LAN side Firewall. If Enabled, the Freeway DSL will assign IP addresses to PCs (DHCP clients) on your LAN when they start up. The default setting is Enabled. Configure the DHCP range used by the DHCP server when assigning IP Addresses to DHCP clients. This range also determines the number of DHCP clients supported. Configure the amount of time the clients will be allowed to connect to DHCP server. If set to 0, the allocated IP addresses will be effective forever. 16 ADSL2/2+ 11N WiFi Router User’s Manual Static IP Leased Time Second IP Address Subnet Mask Click Add Entries to configure static LAN IP according to its MAC address to the clients. Enter the second IP address for this LAN if needed. Enter the subnet mask for this LAN. 6.4 NAT 6.4.1 Virtual Servers You can configure the Freeway DSL as a virtual server. Virtual Server allows you to direct incoming traffic from WAN side (identified by Protocol and External port) to the internal server with private IP address on the LAN side. The internal port is required only if the external port needs to be converted to a different port number used by the server on the LAN side. A maximum 32 entries can be configured. 17 ADSL2/2+ 11N WiFi Router User’s Manual Click Add to configure virtual server. Select the virtual server from the drop-down list or custom the service you need. Then complete the server IP address and click the Apply/Save. 18 ADSL2/2+ 11N WiFi Router User’s Manual 6.4.2 Port Triggering Triggers are used to deal with application protocols that create separate sessions. Some applications, such as NetMeeting, require that specific ports in the Router's firewall be opened for access by the remote parties. Port Trigger dynamically opens up the “Open Ports” in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the “Triggering Ports”. The Freeway DSL allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the ”Open Ports”. A maximum 32 entries can be configured. 19 ADSL2/2+ 11N WiFi Router User’s Manual Click Add to configure the Port Triggering. Select the applications that you want to set up the port settings and then click Save/Apply. 6.4.3 DMZ Host The Freeway DSL can forward IP packets from the WAN that do not belong to any of the applications configured in the Virtual Servers table to the DMZ host computer. To activate the DMZ host, enter the computer's IP address and click Save/Apply. To deactivate the DMZ host, clear the IP address field and click Save/Apply. 20 ADSL2/2+ 11N WiFi Router User’s Manual 6.5 Security – IP Filtering 6.5.1 Outgoing The outgoing filter blocks the LAN traffic from entering the WAN side. By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be blocked by setting up filters. Click Add to create a filter rule to identify outgoing IP traffic. Specify a new filter name and at least one condition. Then click Save/Apply. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. Field Filter Name Protocol Source IP Address / Subnet Mask/ Port Destination IP Address / Subnet Mask / Port Description Enter a name for this filter rule. Select the protocol to be used from the drop-down list. Enter the source (from the LAN side) IP address, subnet mask and port number. Enter the destination (from the WAN side) IP address, subnet mask and port number. 21 ADSL2/2+ 11N WiFi Router User’s Manual 6.5.2 Incoming Incoming IP filter filters the WAN traffic to the LAN side. When the firewall is enabled on a WAN or LAN interface, all incoming IP traffic is blocked. This page allows you to configure filters for accepting some incoming IP traffic. Click Add to create a filter rule to identify outgoing IP traffic. Specify a new filter name and at least one condition. Then click Save/Apply. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. Field Filter Name Protocol Source IP Address / Subnet Mask/ Port Description Enter a name for this filter rule. Select the protocol to be used from the drop-down list. Enter the source (from the WAN side) IP address, subnet mask and port number. 22 ADSL2/2+ 11N WiFi Router User’s Manual Destination IP Address / Subnet Mask / Port WAN/LAN Interface Enter the destination (from the LAN side) IP address, subnet mask and port number. Select the WAN and LAN interface to apply this rule. 6.6 Parental Control Parental Control allows you to add the day of the week and URL restrictions to specific LAN clients. 6.6.1 Time Restriction This page allows you to block Internet access from specified LAN clients for specified periods. Make sure that either the system time is specified directly or Internet time server is configured. Click Add to configure the restriction. Enter the settings and then click Save/Apply. Field User Name Browser’s MAC Address Other MAC Address Select Days of the Week Start/End Blocking Time Description Enter a name for this restriction. This is the MAC address of the LAN device where the browser is running. Select and enter other LAN device’s MAC address. Check the days of the week of blocking. Enter the start and end time of blocking. 23 ADSL2/2+ 11N WiFi Router User’s Manual 6.6.2 URL Filter This page allows you to block specified URLs from accessing. Maximum 100 entries can be configured. Select the list type first and then click Add to configure the URL entries. Enter the URL address and port number. Then click Save/Apply. Field URL Address Port Number Description Enter the URL address of blocking. Enter the port number of blocking. 24 ADSL2/2+ 11N WiFi Router User’s Manual 6.7 Quality of Service You can configure the Quality of Service to apply different priorities to traffic on the Freeway DSL. If Enable Qos checkbox is not selected, all QoS will be disabled for all interfaces. To enable QoS, check Enable QoS checkbox and select a default DSCP mark to automatically mark incoming traffic without reference to a particular classifier. Then click Save/Apply. Field Select Default DSCP Mark Description Select the DSCP mark to mark all egress packets that do not match any classification rules. 25 ADSL2/2+ 11N WiFi Router User’s Manual 6.7.1 Queue Config This page shows the QoS queue on the Freeway DSL. The Queue configuration allows you to configure a QoS queue entry and assign it to a specific network interface. Each of the queues can be configured for a specific precedence. The queue entry configured here will be used by the classifier to place ingress packets appropriately. If you disable WMM function in Wireless Page, queues related to wireless will not take effects Click Add to configure QoS queue. Enter the settings and then click Apply/Save. Field Name Enable Interface Precedence Description Enter a name for the queue. Select to enable or disable this queue. Select an interface for this queue to apply. Select the precedence for this queue. Lower integer values imply higher 26 ADSL2/2+ 11N WiFi Router User’s Manual priority for this queue relative to others. Below is the table of precedence summary: Precedence Meaning Routine Priority Immediate Flash Precedence Meaning Flash Override Critical Internetwork Control Network Control 6.7.2 QoS Classification This page allows you to crate a traffic class rule to classify the upstream traffic, assign queue which defines the precedence and the interface and optionally overwrite the IP header DSCP byte. A rule consists of a class name and at least one condition. All of the specified conditions in this classification rule must be satisfied for the rule to take effect. Field Traffic Class Name Rule Order Rule Status Class Interface Ether Type Source MAC Address/Mask Destination MAC Address/Mask Description Enter a name for this traffic class. Select a rule order for this traffic class. Select to enable or disable this traffic class. Select an interface for this traffic class to apply. Select the Ether type from the drop-down list. Enter the MAC address and the mask of the computer where packets are coming from. Enter the MAC address and the mask of the computer where the packets will be sent to. 27 ADSL2/2+ 11N WiFi Router User’s Manual Assign Classification Queue Mark DSCP Mark 802.1p Priority Tag VLAN ID Select the classification queue for the traffic class. Select the DSCP to mark. Different markers representing different grades of service placed on various packet streams to be recognized by the router for route purposes. If 802.1q was enabled on WAN, then select a value between 0-7. Enter a VLAN ID for the packet to tag. 6.8 Routing 6.8.1 Default Gateway This page allows you to select a preferred WAN interface to be the system’s default gateway. 6.8.2 Static Route This page allows you to add the routing table. A maximum of 32 entries can be configured. Click Add to configure the routing table. Enter the routing information and then click Save/Apply. Field Destination Network Address Subnet Mask Use Interface Use Gateway IP Address Description Enter the destination address of the LAN IP. Enter the subnet mask of the LAN IP. Check and select a WAN interface for static route. Check and enter the gateway address of the remote router. 28 ADSL2/2+ 11N WiFi Router User’s Manual 6.8.3 RIP To activate RIP for the WAN Interface, select the desired RIP version and operation and place a check in the “Enabled” checkbox. To stop RIP on the WAN Interface, uncheck the “Enabled'”checkbox. Click Save/Apply to star/stop RIP and save the configuration. 6.9 DNS 6.9.1 DNS Server This page allows you to enable automatic DNS from the ISP or specify their own DNS server address manually. Field Obtain DNS Info from a WAN Use the Following Static DNS IP Address Primary DNS Sever Secondary DNS Sever Description Select the WAN interface to obtain the DSN info. Select to configure the static DNS IP address manually. Enter the IP address of primary DNS server. (Optional) Enter the IP address of secondary DNS server. 29 ADSL2/2+ 11N WiFi Router User’s Manual 6.9.2 Dynamic DNS (DDNS) The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname in any of the many domains, allowing the Freeway DSL to be easily accessed from various locations on the Internet. Click Add to configure the DDNS. This page allows you to set up DDNS address from DynDNS.org. You must register with the service provider first and obtain the necessary information. Enter the DDNS information and then click Save/Apply. Field D-DNS Provider Hostname Interface DynDNS Username / Password Description Freeway DSL is pre-configured with the DynDNS.org as DDNS provider. Enter the host name. Select a WAN interface to apply DDNS service. Enter username and password of your account on DysDNS.org. 30 ADSL2/2+ 11N WiFi Router User’s Manual 6.10 DSL This page allows you to select the modulation, phone line type and capability specified by your ISP. The default configuration in this page can work with most ADSL implementations. DO NOT change any setting unless you are instructed to do so. Then click Save/Apply. If you want to configure more advanced setting, click Advanced Settings. Select the test mode for DSL line. 31 ADSL2/2+ 11N WiFi Router User’s Manual 6.11 UPnP This page allows you to enable the UPnP function. The UPnP function allows devices to connect seamlessly and to simplify the implementation of networks such as data sharing, communications and entertainment. The UPnP feature requires one active WAN interface. You must create one WAN connection before you can enable this function. In addition, the client connecting to the Freeway DSL should also support this feature. 6.12 DNS Proxy The Freeway DSL can acts as a DNS proxy when you enable DNS proxy feature. Field Enable DNS Proxy Host Name of the modem Domain name of the LAN Network Description Check to enable DNS proxy feature. Enter a host name for the Freeway DSL. Enter a name for this LAN network. 6.13 USB Storage This page shows the information of USB mass storage. Open a file explorer window and type in the address field: \\192.168.1.1\DeviceName where “DeviceName” is the name that was assigned to the storage device. You can click Browse to access the contents on this USB drive. 32 ADSL2/2+ 11N WiFi Router User’s Manual 6.14 Print Server This page allows you to enable the on-board print sever. A USB printer can be connected to the Freeway DSL and used as a network printer. Before connecting your printer to the print server, be sure to install the driver provided by the printer manufacturer on each PC that will use the printer. 1. 2. 3. 4. 5. Plug your USB printer into one of the USB ports on your PC. Install the printer by following the installation instructions included with your printer. You may print a test page to ensure that the printer is working properly. Power off your PC. Disconnect the printer from your PC and plug this thin rectangular end of the USB cable into one of the USB host ports on the Freeway DSL. Connect the power supply to your printer and turn it on. Launch a Web browser. In the location or address field, enter 192.168.1.1 and press Enter. 6. 7. Note 8. 9. 10. 11. 12. 13. 14. If you have modified your gateway's IP address, enter the new IP address instead of 192.168.1.1. When the user name and password window appears, enter the user name and the password. Click OK to login to the Web Application. Select Print Server from the Advanced Setup menu. Enter the printer name and its manufacturer/model information you want to save for it. Click Save/Apply. Write down the printer location address. You need the address to set up the printer on computers that are connected to your network. Windows XP Users: Click Windows Start -> Printers and Faxes; Windows 2000 Users: Click Windows Start -> Settings -> Printers. Click Add a Printer. The Add Printer Wizard will start. Click Next. Choose the radio button labeled A network printer, or a printer attached to another computer. Click Next. Select Connect to a printer on the Internet or on a home or office network. In the URL field, enter the printer location address you wrote down at step 10. Click Next. Note The URL information is case-sensitive and must be exactly matched as it is shown on step 10. 15. Select the manufacturer and model of your printer. Click OK. If your printer does not appear in the list, please go back to step 1 to 4 to install the printer driver to this PC. 16. When prompted, you may select Yes to set this printer as your default printer. 17. The information of printer will be displayed. Click Finish to complete the installation. 33 ADSL2/2+ 11N WiFi Router User’s Manual 6.15 Interface Grouping Interface Grouping supports multiple ports to PVC and bridging groups. Each group will perform as an independent network. 34 ADSL2/2+ 11N WiFi Router User’s Manual Click Add to create new interface group. To support Interface Grouping feature, you must create mapping groups with appropriate LAN and WAN interfaces. Then click Save/Apply. Only the default group has IP interface. Field Group Name WAN Interface used in the grouping Grouped LAN Interfaces Available LAN interfaces Automatically Add Clients with the following DHCP Vendor IDs IMPORTANT! Description Enter a name for this group. Select a WAN interface used in this grouping fro the dropdown list. Select interfaces from the Available LAN Interfaces list and use the arrow buttons to map them to the Grouped LAN Interfaces list. These are the available LAN interfaces on Freeway DSL. Configure a DHCP vendor ID. Any DHCP client requests with the specified vendor ID will be denied an IP address from the local DHCP server. If a vendor ID is configured for a specific client device, you have to reboot the client device attached to the Freeway DSL to allow it to obtain an appropriate IP address. 35 ADSL2/2+ 11N WiFi Router User’s Manual 6.16 LAN Ports This page allows you to enable/disable the Virtual LAN Ports feature. 6.17 IPSec This page shows the IPSec Tunnel connection. 36 ADSL2/2+ 11N WiFi Router User’s Manual Click Add New Connection to add a new IPSec Tunnel connection. Enter the setting for IPSec connection and then click Save/Apply. Field IPSec Connection Name Remote IPSec Gateway Address Tunnel Access From Remote / Local IP Addresses IP Address for VPN IP Subnet Mask Key Exchange Method Authentication Method Description Enter a name for this IPSec connection. Enter the IP address or domain name of the remote IPSec gateway. Select the range of local / remote IP addresses from the drop-down list. Specify the remote / local IP address for VPN. Specify the subnet mask for the remote / local IP address. Select the key exchange method to be auto or manual. Select the authentication method to be Pre-Share Key or Certificate X.509. 37 ADSL2/2+ 11N WiFi Router User’s Manual Pre-Shared Key Certificate Perfect Forward Secrecy Encryption Algorithm Encryption Key Authentication Algorithm Authentication Key SPI Specify the Key if you select the authentication method as Pre-Shared Key. Select the certificate from drop-down list if you select the authentication method as Certificate X.509. Select to enable or disable Perfect Forward Secrecy (PFS) feature. Select the encryption algorithm to be DES, 3DES or AES (aec-cbc). Enter the encryption key to be 3DES or AES (Advanced Encryption Standard). Select the authentication algorithm from drop-down list. Enter the authentication key to be MD5 or SHA1. Enter the SPI (Security Parameter Index) which is an identification tag added to the header tunneling the IP traffic. There are two phases of IPSec: Phase 1: Start to negotiate IKE parameters including encryption, integrity (hash), DiffieHellman parameter values and lifetime to protect the following IKE exchange. The peer that starts the negotiation proposes all its policies to the remote peer and then remote peer tries to find a highest-priority to match with its policies. This sets up a secure tunnel for IKE Phase 2. Phase 2: Start to negotiate IPSec security for the following IKE exchange and mutual examination of the secure tunnel establishment. Note It is critical that the exact same Phase 1 and Phase 2 proposals be entered at the remote client. Field Advanced IKE Settings Mode Encryption Algorithm Integrity Algorithm Select Diffie-Hellman Group for Key Exchange Key Life Time Description This button is available when you select the Key Exchange Method as Auto mode. Select the mode to be Main or Aggressive. Select the encryption algorithm to be DES, 3DES, AES-128, AES-196 or AES-256. Select the integrity algorithm to be MD5 or SHA1. Select the Diffie-Hellman group to be 768, 1024, 1536, 2048, 3072, 4096, 6144 or 8192-bit for key exchange. Configure the life time for Key (in second). 6.18 Certificate This section allows you to create certificates. 6.18.1 Local This page allows you to crate local certificate. Local certificates are used by peers to verify your identity. You can either create certificate request or import the certificate to add local certificates. Maximum 4 certificates can be stored. 38 ADSL2/2+ 11N WiFi Router User’s Manual Click Import Certificate to import the certificate. Enter a certificate name, paste the certificate content and private key to create the certificate. Then click Apply. 39 ADSL2/2+ 11N WiFi Router User’s Manual 6.18.2 Trusted CA If an entity wants to utilize digital certificates, this entity should retrieve certificates of trusted CA servers so it can authenticate the peer with certificates issued by those trusted CA servers. Maximum 4 certificates can be stored. Click Import Certificate to import the certificate. Enter a certificate name and paste the certificate content to create the certificate. Then click Apply. 40 ADSL2/2+ 11N WiFi Router User’s Manual 7. Wireless This section allows you to configure wireless settings on the Freeway DSL. 7.1 Basic This page allows you to configure basic features of wireless feature. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements. Field Enable Wireless Hide Access Point Clients Isolation Disable WMM Advertise Enable Wireless Multicast Forwarding (WMF) SSID (Station Set Identifier) BSSID Description Check to enable wireless feature. Check to disable advertising the SSID of the access point (AP) in broadcast messages to wireless clients. Wireless clients will need to know the SSID if they want to join the network. Check to prevent wireless clients from seeing each other. Check to disable WMM (Wi-Fi Multimedia). WMM allows the network packets of the multimedia application to have priority over regular data network packets, allowing multimedia applications to run smoother and with fewer errors. Check to enable WMF feature. Enter a name for your wireless network. Wireless clients must be configured with the correct SSID to access the wireless network. The BSSID is a 48-bit identity used to identify a particular BSS 41 ADSL2/2+ 11N WiFi Router User’s Manual Country Max Clients WirelessGuest/Virtual Access Points (Basic Service Set) within an area. In Infrastructure BSS networks, the BSSID is the MAC address of the AP and in Independent BSS or ad-hoc networks, the BSSID is generated randomly. Select your country from the drop-down list. Enter the maximum number of wireless clients that are allowed to connect to the AP (Access Point) at the same period. Check to enable virtual AP. It appears to be an independent physical AP, when in actuality there is only a single physical AP. Virtual AP allows you to control wireless clients’ access and security settings. Wireless guests can access Internet through these guest accounts without compromising the integrity of your network. 7.2 Security This page allows you to configure security features of the wireless LAN interface. You can set up configuration manually or through Wi-Fi protected Setup (WPS). WPS (WSC*) uses a push-button or a PIN to simplify the secure network setup. With WPS, Freeway DSL can automatically set the SSID or network name as part of the setup process and provide strong encryption keys to client devices. You do not need to configure SSID, wireless security setting, etc., in the client software. In order to use WPS (WSC), the wireless client software must also support WPS. *WSC (Wi-Fi Simple Configuration) is a former name of WPS. Field Enable WSC (WSC) Setup AP by PushButton / PIN Push-Button PIN Description Select to enable or disable WPS (WSC). Select to set up the AP by push-button or PIN (Personal Identification Number) to simplify the secure network setup. Select it to start WSC by simply pushing a button, either an actual button or a software one, on both WPS (WSC) AP and clients to connect. The push-button of WSC is labeled as WPS on the upper case of Freeway DSL. Select it to start WPS (WSC) by using a same 8-digit PIN (Device PIN) in both AP and WPS (WSC) clients to make the connection. 42 ADSL2/2+ 11N WiFi Router User’s Manual Set WSC AP Mode Add Enrolee Device PIN WSC Add External Registrar Select the WPS (WSC) AP mode. Click it to start WSC by the means of push-button or PIN. This button acts the same function as the physical button on the upper case of the Freeway DSL when you select using Push-Button to be the setup AP method. The WPS LED on the Freeway DSL will blink slowly for 2 minutes when the Freeway DSL is waiting for incoming WSC request. Device PIN is generated by the Freeway DSL. This PIN changes every time you reboot the Freeway DSL. Click Start AddER button to start external registrar. You can also set up the AP manually. Depending on the network authentication you selected, the screen will change accordingly so that additional fields can be configured for the specific authentication method. Field Select SSID Network Authentication Description Select the SSID from the drop-down list. Select the authentication to be used. Open: Anyone can access the network. The default is a disabled WEP encryption setting. Shared: WEP encryption is enabled and encryption key strength of 64-bit or 128-bit needs to be selected. Click Set Encryption Keys to manually set the network encryption keys. Up to 4 different keys can be set and you can come back to select which one to use at anytime. 802.1: Requires mutual authentication between a client station and the router by including a RADIUS-based authentication server. Information about the RADIUS server such as its IP address, port and key must be entered. WEP encryption is also enabled and the encryption strength must also be selected. WPA (Wi-Fi Protected Access): Usually used for the larger enterprise environment, WPA uses a RADIUS server and TKIP (Temporal Key Integrity Protocol) encryption (instead of WEP encryption, which is disabled). TKIP uses 128-bit dynamic session keys (per user, per session, and per packet keys). WPA-PSK (Wi-Fi Protected Access – Pre-Shared Key): WPA for home and SOHO environments, also using the same strong TKIP encryption, perpacket key construction, and key management that WPA provides in the enterprise environment. The main difference is that the password is entered manually. WPA2 (Wi-Fi Protected Access 2): Second generation of WPA, 43 ADSL2/2+ 11N WiFi Router User’s Manual WEP Encryption Encryption Strength Current Network Key Network Key 1-4 RADIUS Server IP Address RADIUS Port RADIUS Key WPA Group Rekey Interval WPA Encryption WEP Encryption WPA Pre-Shared Key WPA2 Preauthentication Network Re-auth Interval which uses AES (Advanced Encryption Standard) instead of TKIP as its encryption method. Network re-auth interval is the time in which another key needs to be dynamically issued. WPA2-PSK (Wi-Fi Protected Access 2 – Pre-Shared Key): Suitable for home and SOHO environments, it also uses AES encryption and requires you to enter a password and a re-key interval time. Mixed WPA2 / WPA: During transitional times for upgrades in the enterprise environment, this mixed authentication method allows upgraded users and users not yet upgraded to access the network via the router. RADIUS (Remote Authentication Dial-In User Service) server information must be entered for WPA and a as well as a group re-key interval time. Both TKIP and AES are used. Mixed WPA2 / WPA-PSK: useful during transitional times for upgrades in the home or SOHO environment, a pre-shared key must be entered along with the group re-key interval time. Both TKIP and AES are also used. Select to enable or disable WEP (Wired Equivalent Privacy). Select the encryption strength to be 64 or 128-bit. Select the network key from 1 to 4 from drop-down list. Enter 4 sets of network key in each field. Enter the IP address of RADIUS server. Enter the port number for RADIUS server IP address. Enter the key for RADIUS server. The key you set must be the same one as configured in the RADIUS server. Enter the re-key interval for WPA. Select WPA encryption to be TKIP, AES or TKIP+AES. Select to enable or disable WEP encryption. Enter the PSK for WPA. Select to enable or disable WPA2 preauthentication. Specify the interval for network re-authentication. 44 ADSL2/2+ 11N WiFi Router User’s Manual 7.3 MAC Filter This function allows you to manage whether a wireless client is allowed to access the Freeway DSL or not based on the MAC address of device. Select the MAC Restrict Mode you want to use and then click Add to add the MAC address to the wireless MAC address filters. Field MAC Restrict Mode Description Select to disable, allow or deny the access of Freeway DSL based on the client’s MAC address. Enter the MAC address to the wireless MAC address filters. Then click Save/Apply. 45 ADSL2/2+ 11N WiFi Router User’s Manual 7.4 Wireless Bridge This page allows you to configure the Freeway DSL as a bridge. Wireless bridge feature provides a wireless link between WLAN segments to extend the coverage range. If configure the Freeway DSL to bridge mode, then Access Point features is disabled. In this next screen you can select the mode, either access point or wireless bridge that you want the router to be in. In the screen below, Bridge Restrict is enabled, therefore you see the Remote Bridges MAC Address fields. If Bridge Restrict is disabled, then there is nothing left to do afterwards. Click Save/Apply to continue. Field AP Mode Bridge Restrict Remote Bridges MAC Address Refresh Description Select to enable AP (Access Point) or disable AP (Wireless Bridge). If AP Mode is set to Bridge and this field set to Enabled, it allows you to specify the available bridges. If Bridge Restrict is disabled, any wireless bridge within range may connect. If you select Enabled(Scan), the AP will scan for available wireless bridges and display its MAC address it found. Enter (Bridge Restrict in Enabled mode) or select (Bridge Restrict in Enabled (Scan) mode) the remote bridge MAC address if Bridge Restrict is enabled. Click this button to update the remote bridges. Updating will take few seconds. 46 ADSL2/2+ 11N WiFi Router User’s Manual 7.5 Advanced This page allows you to configure setting for advanced wireless features. Field Band Channel Auto Channel Timer 802.11n/EWC Bandwidth Description The supported band is 2.4GHz. Select the channel you want to use. The wireless network is divided into several channels (region depends). Each channel broadcasts on a slightly different frequency; if you are experiencing interference with another device such as a baby monitor, security alarm, or cordless phone, then change the channel on your Freeway DSL. This value cannot be changed. Enhanced Wireless Consortium Select the bandwidth to be either 20MHz or 40MHz (dual channel), that the Freeway DSL will use if 802.11n/EWC is configured as Auto and the Channel is configured as Auto. If the Freeway DSL detects other adjacent wireless networks, it will use 20 MHz operation so as to not interfere with the networks. If no other adjacent networks are detected, the Freeway DSL will use 40MHz operation. In both 20 MHz and 40 MHz operation, when the 802.11n/EWC is configured to Auto, the Freeway DSL will use 47 ADSL2/2+ 11N WiFi Router User’s Manual Control Sideband 802.11n Rate 802.11n Protection Support 802.11n Client Only 54g™ Rate Multicast Rate Basic Rate Fragmentation Threshold RTS Threshold DTIM Interval Beacon Interval Global Max Clients Xpress™ Technology Transmit Power WMM (Wi-Fi Multimedia) WMM No Acknowledgement WMM APSD dynamic channel selection to determine the best channels to transmit in order for optimal operation. Select the extension channel to be in the Upper or Lower sideband. Set the 802.11n rate. These rates are only applicable when the 802.11n/EWC is configured as Auto. Select Auto if there is a possibility that 802.11b or 802.11g devices will use your wireless network. In Auto mode, the wireless devices use RTS/CTS to improve 802.11n performance in mixed 802.11g/802.11b networks. Select Off to maximise 802.11n throughput under most conditions. Select On to support 802.11n clients only This value cannot be changed. Use the default setting “Auto” unless there is a specific requirement for multicast. Use the default setting “Auto” unless there is a specific requirement for basic rate. Specify a value between 256 (min) and 2346 (max). This value determines whether packets will be fragmented and at what size. Specify a value to determine the packet size of a transmission through the use of the router to help control traffic flow. The default value of 2347 (maximum length) disables RTS (Request To Send) Threshold. Specify the wake-up interval for clients in power-saving mode. DTIM (Delivery Traffic Indication Message) is as known as Beacon Rate. Specify the mount of time between beacon transmissions. Specify the maximum clients that are allowed to connect to the Freeway DSL. Select to enable or disable Xpress™ Technology. Xpress™ Technology is a Broadcom innovation. It utilizes standards based on framebursting to achieve higher throughput. With Xpress™ Technology enabled, aggregate throughput (the sum of the individual throughput speeds of each client on the network) can improve by up to 25% in 802.11g only networks and up to 75% in mixed networks comprised of 802.11g and 802.11b equipment. Select power output to be 20%, 40%, 60%, 80% and 100%. Select the mode to “Auto” for automatically improves the experience for audio, video and voice applications over a Wi-Fi network. Select to enable or disable WMM ACK. Enable this feature only when you are at a good communication quality and low interference area. Select to enable or disable ASPD (Automatic Power Save Delivery). It is a more efficient power management method for low power consumption. 48 ADSL2/2+ 11N WiFi Router User’s Manual 7.6 Station Info This page shows the connected wireless stations and their status. 49 ADSL2/2+ 11N WiFi Router User’s Manual 8. Diagnostics This page shows the ADSL diagnostic information. Usually, you do not have to view this data, but you may find it useful when working with your ISP to diagnose network and Internet data transmission problems. 50 ADSL2/2+ 11N WiFi Router User’s Manual 9. Management This section allows you to maintain the system, including backing up the configurations, viewing system log, maintaining access control and updating software. 9.1 Settings 9.1.1 Backup This page allows you to backup (copy) current settings to a file on your PC. 9.1.2 Update This page allows you to restore the settings from a previously saved file. To restore a previously saved configuration file onto the Freeway DSL, click Browse to find the file on your PC and click Update Settings. The Freeway DSL restores settings and reboots to activate the restored settings. 9.1.3 Restore Default This page allows you to reset the configuration to default settings. It deletes all current settings and resets the Freeway DSL to factory default settings. Click Restore Default Settings and click OK when the pop-up window appears confirming that you want to restore factory default settings to your Freeway DSL. The Freeway DSL restores the default settings and reboots. IMPORTANT! DO NOT power off the Freeway DSL or press the reset button while this process is in progress. 51 ADSL2/2+ 11N WiFi Router User’s Manual 9.2 System Log This dialog allows you to view system log and configure system log options. To view the System Log, click View System Log. To configure System Log, click Configure System Log. 9.2.1 Configure System Log This page allows you to configure the system log level and display level. You must enable the System Log function so that the Freeway DSL can log the selected events. Field Log Level Display Level Mode Server IP Address Server UDP Port Description Select level of application events to log. Select level of application events to display. Select to record the events in the local memory, sent them to a remote system log server or both. Enter the IP Address of remote system log server. Enter the UDP port of the remote system log server. 52 ADSL2/2+ 11N WiFi Router User’s Manual 9.2.2 View System Log This page shows the events of Freeway DSL. If the system log feature is enabled, the system will log selected events. All events above or equal to the selected log level will be logged and displayed. 9.3 SNMP Agent The SNMP (Simple Network Management Protocol) allows the management application to retrieve statistics and status from the SNMP agent in this device. Field Read Community Set Community System Name System Location System Contact Trap Manager IP Description Enter the password (character string) to specify the read privilege between the SNMP agent and manager. Enter the password (character string) to specify the write privilege between the SNMP agent and manager. Enter the System name of the SNMP agent Enter the System location of the SNMP agent Enter the System contact of the SNMP agent. Enter the IP address of the Trap Manager. 53 ADSL2/2+ 11N WiFi Router User’s Manual 9.4 TR-069 Client The Freeway DSL includes a TR-069 client which is a WAN management protocol. All the values are already filled in. Field Inform Inform Interval ACS URL ACS User Name ACS Password WAN Interface Used by TR-069 Client Display SOAP messages on serial console Connection Request Authentication Connection Request User Name Connection Request Password Connection Request URL GetRPCMethods Description Enable or disable the Freeway DSL to connect to the ACS periodically. Enter the amount of time (in second) between a successful connection with an ACS server and a new attempt to connect to an ACS server. This field is enabled only when the Inform Enabled is selected. Enter the URL of the Auto Configuration Server (ACS) provided by the ISP. Enter the user name for the ACS to authenticate. Enter the password for the ACS to authenticate. Select the WAN interface from the drop-down for TR-069 client to use. Enable or disable whether display SOAP messages on serial console or not. Check to enable connection request authentication. Enter the username used to authenticate an ACS making a connection request to the Freeway DSL. Enter the password used to authenticate an ACS making a connection request to the Freeway DSL. This is the URL of connection request. Click this button to force the Freeway DSL to immediately establish a connection to the ACS. 54 ADSL2/2+ 11N WiFi Router User’s Manual 9.5 Internet Time This page allows you to manually configure the time and select Time Zone. Field Automatically synchronize with Internet time server First/ Second/ Third/ Fourth/ Fifth NTP time server Time Zone Offset Description Check to enable the Freeway DSL to synchronize with Internet time server to update the system clock. Select at least one Internet time server from dropdown list or specify its IP address manually. Select The time zone in which the Freeway DSL resides. 9.6 Access Control 9.6.1 Passwords This page allows you to change the password for all users account. Access to your Freeway DSL router is controlled through three user accounts: admin, support, and user. The user name "admin" has unrestricted access to change and view configuration of the Freeway DSL The user name "support" is used to allow an ISP technician to access your Freeway DSL for maintenance and to run diagnostics. The user name "user" can access the Freeway DSL, view configuration settings and statistics, as well as, update the router's software. Field Username Old Password New Password Confirmed Password Description Enter the pre-defined username from drop-down list. Enter the old password of this account. Enter the new password for this account. Enter the new password for this account again to confirm the password. 55 ADSL2/2+ 11N WiFi Router User’s Manual 9.6.2 Services This page allows you to enable or disable the services from being used for WAN. 9.7 Update Software The system software used by this Freeway DSL is called “firmware”. This page allows you to upgrade the firmware to a newer version. 56 ADSL2/2+ 11N WiFi Router User’s Manual This page allows you to update the software (firmware) of Freeway DSL to a newer version. If your ISP releases new software for Freeway DSL, follow these steps to perform an upgrade. 1. Obtain an updated software image file from your ISP. 2. Click Browse to locate the image file. 3. Click Update Software to upload the new image file. Note The update process takes about 2 minutes to complete, and your DSL Router will reboot. IMPORTANT! DO NOT power off the Freeway DSL or press the reset button while this process is in progress. 9.8 Reboot This page allows you to reboot the Freeway DSL. IMPORTANT! DO NOT power off the Freeway DSL or press the reset button while this process is in progress. 57 ADSL2/2+ 11N WiFi Router User’s Manual 10. Wall Mounting (Optional) This product can be mounted on wall. There are two holes in the lower case and you can use the screws to mount the device. 58 ADSL2/2+ 11N WiFi Router User’s Manual Appendix A. Troubleshooting Below is a list of commonly asked questions. Before calling technical support, please look through these issues to see if they help solve your problem. The Freeway DSL is not functional. 1. Check to see that the POWER LED is lit and than the network cables are installed 2. 3. 4. 5. correctly. Refer to the Quick Start Guide for more details. Check to see that the LAN, DSL and Internet LEDs are lit. Check the settings on your PC and Freeway DSL. Again, refer to the Quick Start Guide for more details. From your PC, can you PING the Freeway DSL? Assuming that the Freeway DSL has DHCP enabled and your PC is on the same subnet as the Freeway DSL, you should be able to PING the Freeway DSL. Can you PING the Internet? Your ISP should have provided the IP address of their server. If you can ping the Freeway DSL and your protocols are configured correctly, you should be able to ping the ISPs network. If you cannot PING the ISP’s network, make sure your using the correct protocols with the correct VPI/VCI values. I can’t connect to the Freeway DSL. 1. Check to see that the POWER LED is lit and that the network cables are installed 2. 3. 4. correctly. Make sure that the PC and Freeway DSL is on the same network segment. The Freeway DSL’s default IP address is 192.168.1.1. If you are running a Windows based PC, you can open a DOS window and type IPCONFIG; make sure that the network adapter that is connected to the Freeway DSL is within the same subnet. Also, your PC’s Subnet Mask should match the Freeway DSL’s subnet mask. The Freeway DSL has a default subnet mask of 255.255.255.0. If this still does not work, press the Reset button. This will place the Freeway DSL into its factory default state. Go through the above procedures again. The DSL LED continues to blink but does not go solid. 1. Make sure you have DSL service. You should get some kind of information from your 2. 3. ISP which states that DSL service is installed. You can usually tell if the service is installed by listening to the ADSL phone line; you will hear some high-pitched noise. If you do not hear high-pitched noise, contact your ISP. This means that the DSL line is trying to train but for some reason it cannot establish a valid connection. The main cause of this is that you are too far away from the central office. Contact your DSL service provider for further assistance. Verify that the DSL line is connected directly to the wall and to the line input on the Freeway DSL. The Internet LED is always off. 1. Make sure you have DSL service. You should get some kind of information from your 2. ISP which states that DSL service is installed. You can usually tell if the service is installed by listening to the phone line; you will hear some high-pitched noise. If you do not hear high-pitched noise, contact your ISP. Verify that the phone line is connected directly to the wall and to the line input on the Freeway DSL. If the Freeway DSL is connected to the wall line outlet via a splitter, make sure you connect the Freeway DSL to the port labeled MODEM. The Internet LED is always red. Make sure your account for the DSL service is correct. Re-type your username and password for the Internet account. The username and password are usually case sensitive. Make sure your Caps Lock key is not locked when entering the account. 59 ADSL2/2+ 11N WiFi Router User’s Manual I cannot ping the Freeway DSL from the attached LAN. 1. Verify that the IP addresses are properly configured. In most cases, you enable the 2. Freeway DSL’s DHCP function to dynamically assign IP addresses to hosts on the attached LAN. However, if you manually configure IP addresses on the LAN, verify that the same network address (network component of the IP address) and subnet mask are used for both the Freeway DSL and any attached LAN devices. Make sure the device you want to ping (or from which you are pinging) has been configured for TCP/IP correctly. I cannot connect using the web browser. 1. Make sure you have configured the Freeway DSL with a valid IP address, subnet mask 2. 3. and default gateway. Make sure you have a valid network connection to the Freeway DSL and the port you are using has not been disabled. Make sure the cable between the attached PC and the Freeway DSL is firmly installed. I forgot or lost the password. Press the Reset button on the rear panel (holding it down for at least 8 seconds) to restore the factory default settings. 60 ADSL2/2+ 11N WiFi Router User’s Manual Appendix B. Specifications Physical Interfaces ADSL Compliance ATM Protocols PPP Support NAT Bridging Routing Multicasting Management Firewall / Security Quality of Service (QoS) Environmental Specification Wireless Standards Frequency Band Modulation Data Rate Encryption Operating Range One ADSL port for WAN Four 10/100 Mbps Fast Ethernet ports for LAN One USB 2.0 host port for USB mass storage or printer Two antennas built-in for wireless wide coverage IEEE 802.11 b/g/n Wireless AP with WPS auto setup G.994 G.992.1 (G.dmt) - Annex A and B G.992.2 (G.lite) - Annex A ANSI T1.413 G.992.3 (ADSL2) - Annex A, B, L, and M G.992.5 (ADSL2+) - Annex A, B, and M Up to 16 PVCs OAM F4/F5 loop back Adaptation Layers AAL5, AAL2 and AAL0 are supported PPP over ATM PVC (RFC2364&RFC1577) PPP over Ethernet (RFC2516) Multiple PPPoE sessions on single PVC PPPoE pass through PAP, CHAP, MS-CHAP authentication supported Static Port Mappings NAT/NAPT IEEE 802.1d Bridge Static Route RIP v1 / v2 IGMP Proxy v1/v2/v3, IGMP snooping v1/v2 SNTP, DDNS, UPnP, HTTP, FTP, TFTP, Telnet, SSH, SNMP,TR-069, DHCP client/server SPI (Stateful Packet Inspection) Firewall Intrusion Alert Application layer gateway for H.323, SIP and IPSec/L2TP/PPTP Mac/IP/TCP/interface Filtering Denial of Service (DOS) Advanced DMZ IPSEC / PPTP Pass through ATM QoS: CBR, rt-VBR, nrt-VBR, UBR-with-PCR, UBR, IP/Bridge/802.1P QoS Power Input Device input power: 12V/1A Power Consumption: 15W Operating Temperature: 0 °C to 40 °C Operating Humidity: 95% (non-condensing) IEEE 802.11b/g/n for Wireless LAN 2.400 to 2.4835 GHz ISM band 802.11n: OFDM (64QAM,16QAM, QPSK,BPSK) 802.11g: OFDM (64QAM,16QAM, QPSK,BPSK) 802.11b: CCK (11Mbps, 5.5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps) 11 b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps 11n Draft 2.0 (20MHz): 13, 26, 39, 52, 78, 104, 117, 130 Mbps 11n Draft 2.0 (40MHz): 27, 54, 81, 108, 162, 216, 243, 270, 300 Mbps Hardware-based IEEE 802.11i encryption /decryption engine, Includes 64-bit/128-bit WEP, TKIP, 802.1x, WPA/WPA2 and AES Open space: 100m ~ 300m Indoor: 35m ~ 100m 61
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2009:07:22 19:11:18+08:00 Creator Tool : Acrobat PDFMaker 7.0 for Word Modify Date : 2009:09:08 14:25:51+08:00 Metadata Date : 2009:09:08 14:25:51+08:00 Format : application/pdf Title : Creator : Rosena Document ID : uuid:9ea13224-b30b-41c0-912e-bb5c983f2762 Instance ID : uuid:8ffb4a85-8c9f-46a1-b938-5d7dfd35ae65 Company : mototech Page Layout : OneColumn Page Count : 65 Author : RosenaEXIF Metadata provided by EXIF.tools