CastleNet Technology BTC08R800BLE Bluetooth 4.0 dual mode Embedded Module User Manual BTC08R800 QIG FCC v01

Download:
Mirror Download [FCC.gov]
Document ID	1788026
Application ID	FXxJUG4TXVTOyQEYLO4XFQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.67kB (158317 bits)
Date Submitted	2012-09-11 00:00:00
Date Available	2012-09-11 00:00:00
Creation Date	2012-09-11 09:42:34
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2012-09-11 10:04:47
Document Title	Microsoft Word - BTC08R800_QIG_FCC_v01
Document Creator	PScript5.dll Version 5.2.2
Document Author:	EMILY

CastleNet BTC08R800 User Guide
User Guide
Bluetooth 4.0 dual mode Embedded Module
CastleNet Technology Inc.
Copyright © 2011 All Rights Reserved.
1 of 6
CastleNet BTC08R800 User Guide
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
installation.
However, there is no guarantee that interference will not occur in a particular
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
‐
Reorient or relocate the receiving antenna.
‐
Increase the separation between the equipment and receiver.
‐
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
‐
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
CastleNet Technology Inc.
Copyright © 2011 All Rights Reserved.
2 of 6
CastleNet BTC08R800 User Guide
This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna and users, and
The transmitter module may not be co‐located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end‐product for any additional compliance requirements
required with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co‐location with another transmitter), then the FCC authorization is no longer considered
valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be
responsible for re‐evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20
cm may be maintained between the antenna and users. The final end product must be labeled in a visible
area with the following: “Contains FCC ID: RK9‐BTC08R800BLE”. The grantee's FCC ID can be used only when
all FCC compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
CastleNet Technology Inc.
Copyright © 2011 All Rights Reserved.
3 of 6
CastleNet BTC08R800 User Guide
1. INTRODUCTION
The BTC08R800 series is the new generation of Bluetooth 4.0 module. It is composited of
the latest CSR 8510 PC-ROM chip. The external antenna connection is via IPEX
connector. It is compatible with all BT software in the market, and Microsoft Win7 BT utility.
The bundled software will enrich more Bluetooth application in the Notebook / Tablet PC
etc.
The cable connection and PIN define of “Host I/F connector” from BT module
(BTC08R800 series) to PC system is specially customized by OEM Laptop PC.
2. PIN Define (Host I/F connector)
PIN#
Define
GND
USB D+
USB D‐
BT_STATUS
BT_ACT
WLAN and BT Co‐existence
BT_ON
Active High to enable BT Radio.. Low to disable BT Radio.
WLAN_ACT
+3.3V
LED
10
GND
CastleNet Technology Inc.
Description
Connected when 3‐wired BT‐WiFi coexistence.
WLAN and BT Co‐existence
Power supply for module
LED indicator for BT activity. / Reserved.
Copyright © 2011 All Rights Reserved.
4 of 6
CastleNet BTC08R800 User Guide
3. Block Diagram
4. INSTALLATION
4.1 Installed in Laptop PC
The Mainboard of the system should provide a Host connector and Cable connection for BT
module. Please follow the SOP to install & assemble it step by step.
4.2 Testing in Lab
The module is embedded inside Notebook. If for testing purpose, we provide the “USB Testing
Board” in order to let tester connect BTC08R800 via the special cable connection to PC externally.
The USB Testing Board provides +5V/3.3V conversion from PC Host. Please plug into any USB
port on your PC.
CastleNet Technology Inc.
Copyright © 2011 All Rights Reserved.
5 of 6
CastleNet BTC08R800 User Guide
After Hardware installation, when system find the new hardware, please install the driver /
software correctly.
CastleNet Technology Inc.
Copyright © 2011 All Rights Reserved.
6 of 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:09:11 10:04:47+08:00
Create Date                     : 2012:09:11 09:42:34+08:00
Metadata Date                   : 2012:09:11 10:04:47+08:00
Format                          : application/pdf
Title                           : Microsoft Word - BTC08R800_QIG_FCC_v01
Creator                         : EMILY
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:34af6c80-6ba8-4740-9dfb-eb532b26a250
Instance ID                     : uuid:1824278b-05f9-4ba3-8828-1f9b2f98a925
Page Count                      : 6
Author                          : EMILY

EXIF Metadata provided by EXIF.tools