Cellink 4710874200661 Bluetooth Global Positioning System User Manual Manual BTG 7000 050309

Cellink Co., Ltd. Bluetooth Global Positioning System Manual BTG 7000 050309

UserManual.wiki >

4710874200661 User Manual

User Manual

CELLINK CO., LTD. 11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C. TEL: +886-2-26962773 FAX: +886-2-26962774 CELLINK. CO., LTD Bluetooth GPS BTG-7000 User Manual Prepared and all rights reserved by CELLINK CO., LTD

CELLINK CO., LTD. 11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C. TEL: +886-2-26962773 FAX: +886-2-26962774 TABLE OF CONTENTS Sections Table of Contents Chapter 1 INTRODUCTION Introductions What is GPS? Bluetooth GPS receiver Package of contents Hardware Diagram Button Functions Chapter 2 INSTALLATIONS Step1: battery charging Step2: mapping software installation Step3: GPS connection Step4: Bluetooth connection Step5: GPS navigation Receiver Specifications Receiver Operations Chapter 3 Chapter 4 Technical Specification Table

CELLINK CO., LTD. 11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C. TEL: +886-2-26962773 FAX: +886-2-26962774 What is GPS? GPS stands for Global Positioning Systems. GPS is based upon a complex system of 24 satellites orbiting the earth 24 hours a day at an altitude of around 17,500 km, 5 control stations around the world and GPS receivers to pinpoint one’s precise location. Satellites systems are very well-designed that at least 4 of them could be viewed anytime, anywhere and in any weather condition. Therefore, time and distance are efficiently transmitted to the ground. This system is launched and has been maintained by the US department of Defense, and the use of the system is absolutely free for everyone. It provides infinite applications while equipped with microcomputer devices, such as PC, Laptop, PDA and smart phones, etc. This is the simplest approach to instantaneously give a precise position and time for civilian users. Bluetooth GPS receiver: If you are a frequent driver and tired about hassle with paper maps, Cellink Bluetooth GPS will bring you a whole new experience about navigation. Bluetooth GPS receiver provides wireless connection using a Bluetooth radio link – within 10 meters and above between GPS Receiver and its microelectronic platform. Now, you may enjoy the ultimate the convenience of GPS without the hassle of dangling wires. The build-in hardware tracking loop processor WAAS/EGNOS brings better position accuracy (any average of up to 5 times better). A WAAS/EGNOS-capable-receiver can give you a position accuracy of better than three meters 95 percent of the time. The receiver is intended to use in a broad range of applications. It simultaneously tracks up to sixteen satellites at once. Package of contents o Lather case for GPS receiver o Travel charger o Car charger o Demo CD o Users’ manual

CELLINK CO., LTD. 11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C. TEL: +886-2-26962773 FAX: +886-2-26962774 LED indicators: There are 6 LED indicators on the top of the receiver. LED Indicators Color Functions Functions Icons D1 Blue Bluetooth Connection D1 Flashes: get BT connection D2 Red Low Battery Indicator D2 Flashes: enter deep sleep mode D5 GreenD6 Red Charging Status both D5 and D6 are on: in charging statusD3 on: Fully-charged D3 Green Satellites Connection D3 Flashes: get Satellites connection D4 Green Main Power D4 Flashes slowly: Bluetooth standby Pairing Status: D1 and D4 Flash Alternatively Bluetooth on: D1 flashes GPS on: D3 flashes GPS working: D1 and D3 flashes

CELLINK CO., LTD. 11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C. TEL: +886-2-26962773 FAX: +886-2-26962774 Hardware Diagram D4: Power on/off (Green) D3: Satellite connection indicator (Green) D1: Bluetooth connection indicator (Blue)D2: Low battery indicator (Red) D5 and D6: charging status indicator (Green &Red) Jack Cap Pairing switch Power switch Charging DC Jack Power Jack External Antenna Port Inside of the Cap

CELLINK CO., LTD. 11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C. TEL: +886-2-26962773 FAX: +886-2-26962774 Specification Table: Model No. BTG-7000 Bluetooth Standard Bluetooth Spec. 1.1 / Class II Channels 16 channels all-in-view tracking Chipset / Module NEMERIX solutions Frequency L1, 1,575.42 Mhz C/A 1.023 MHz chip rate Antenna Type Built-in patch antenna Batteries Li-Polymer rechargeable 700mAh Position accuracy 7 meters RMS Velocity accuracy 0.1 m/sec without SA Time accuracy 1 microsecond synch. To GPS time Acquisition Rate : Hot/Warm/Cold start time 12/38/60 sec Data Update time 1 sec Data Protocol NMEA0183 V3.0 Sensitivity Tracking : -152dBm typ. Acquisition : -139dBm typ. Operating Time Up to 10 hrs (after full charge) Standby Time 300 hrs. Operating Temperature range -10°C to 60°C Storage Temperature range -20°C to 75°C Operating Distance 10 meters Dimension (L)80*(W)58*(H)18 Certification Approval CE, FCC

CELLINK CO., LTD. 11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C. TEL: +886-2-26962773 FAX: +886-2-26962774 Chapter 2 Installation and Usage Step1: battery charging Ensure your batteries are fully charged before you start to use your Bluetooth GPS receiver. Both AC travel charger and DC car charger are included in the package. The power jack is located in the jack cap. Open the cap and connect the charger into the power jack. To use AC travel charger, simply plug it into any electrical socket. To use DC car charger, simply plug it into cigarette lighter port of your car. While charging, both LED indicators D5 (green) and D6 (red) are on. While it’s done charging, D6 turns off and D5 remains on (green LED). Step2: mapping software installation Step3: GPS connection Step4: Bluetooth connection Step5: GPS navigation

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu