Cellink 4710874200661 Bluetooth Global Positioning System User Manual Manual BTG 7000 050309

Download:
Mirror Download [FCC.gov]
Document ID	562164
Application ID	lql9VmeXBO8/CoLuz5DiHA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.67kB (145860 bits)
Date Submitted	2005-07-15 00:00:00
Date Available	2005-07-15 00:00:00
Creation Date	2005-03-25 10:48:28
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-06-23 18:25:20
Document Title	Microsoft Word - Manual-BTG-7000-050309.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	jean

CELLINK CO., LTD.
11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C.
TEL: +886-2-26962773 FAX: +886-2-26962774
CELLINK. CO., LTD
Bluetooth GPS BTG-7000 User Manual
Prepared and all rights reserved by
CELLINK CO., LTD
CELLINK CO., LTD.
11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C.
TEL: +886-2-26962773 FAX: +886-2-26962774
TABLE OF CONTENTS
Sections
Table of Contents
Chapter 1 INTRODUCTION
Introductions
What is GPS?
Bluetooth GPS receiver
Package of contents
Hardware Diagram
Button Functions
Chapter 2 INSTALLATIONS
Step1: battery charging
Step2: mapping software installation
Step3: GPS connection
Step4: Bluetooth connection
Step5: GPS navigation
Receiver Specifications
Receiver Operations
Chapter 3
Chapter 4 Technical Specification Table
CELLINK CO., LTD.
11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C.
TEL: +886-2-26962773 FAX: +886-2-26962774
What is GPS?
GPS stands for Global Positioning Systems. GPS is based upon a complex
system of 24 satellites orbiting the earth 24 hours a day at an altitude of around
17,500 km, 5 control stations around the world and GPS receivers to pinpoint
one’s precise location. Satellites systems are very well-designed that at least 4 of
them could be viewed anytime, anywhere and in any weather condition.
Therefore, time and distance are efficiently transmitted to the ground. This
system is launched and has been maintained by the US department of Defense,
and the use of the system is absolutely free for everyone. It provides infinite
applications while equipped with microcomputer devices, such as PC, Laptop,
PDA and smart phones, etc. This is the simplest approach to instantaneously
give a precise position and time for civilian users.
Bluetooth GPS receiver:
If you are a frequent driver and tired about hassle with paper maps, Cellink
Bluetooth GPS will bring you a whole new experience about navigation.
Bluetooth GPS receiver provides wireless connection using a Bluetooth radio
link – within 10 meters and above between GPS Receiver and its microelectronic
platform. Now, you may enjoy the ultimate the convenience of GPS without the
hassle of dangling wires. The build-in hardware tracking loop processor
WAAS/EGNOS brings better position accuracy (any average of up to 5 times
better). A WAAS/EGNOS-capable-receiver can give you a position accuracy of
better than three meters 95 percent of the time. The receiver is intended to use in
a broad range of applications. It simultaneously tracks up to sixteen satellites at
once.
Package of contents
o Lather case for GPS receiver
o Travel charger
o Car charger
o Demo CD
o Users’ manual
CELLINK CO., LTD.
11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C.
TEL: +886-2-26962773 FAX: +886-2-26962774
LED indicators:
There are 6 LED indicators on the top of the receiver.
LED
Color
Functions
Functions
Indicators
Bluetooth
D1
Blue
D1 Flashes: get BT connection
Connection
Low Battery
D2
Red
D2 Flashes: enter deep sleep mode
Indicator
Charging
both D5 and D6 are on: in charging status
D5
Green
Status
D3 on: Fully-charged
D6
Red
D3
Green
Satellites
Connection
D3 Flashes: get Satellites connection
D4
Green
Main Power
D4 Flashes slowly: Bluetooth standby
Pairing Status:
Bluetooth on:
GPS on:
GPS working:
D1 and D4 Flash Alternatively
D1 flashes
D3 flashes
D1 and D3 flashes
Icons
CELLINK CO., LTD.
11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C.
TEL: +886-2-26962773 FAX: +886-2-26962774
Hardware Diagram
D1: Bluetooth connection indicator (Blue)
Jack Cap
D2: Low battery indicator (Red)
D5 and D6: charging status indicator (Green &Red)
D3: Satellite connection indicator (Green)
D4: Power on/off (Green)
Power switch
Pairing switch
Inside of the Cap
Power Jack
Charging DC Jack
External Antenna Port
CELLINK CO., LTD.
11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C.
TEL: +886-2-26962773 FAX: +886-2-26962774
Specification Table:
Model No.
Bluetooth Standard
Channels
Chipset / Module
Frequency
C/A
Antenna Type
Batteries
Position accuracy
Velocity accuracy
Time accuracy
Acquisition Rate :
Hot/Warm/Cold start time
Data Update time
Data Protocol
Sensitivity
Operating Time
Standby Time
Operating Temperature range
Storage Temperature range
Operating Distance
Dimension
Certification Approval
BTG-7000
Bluetooth Spec. 1.1 / Class II
16 channels all-in-view tracking
NEMERIX solutions
L1, 1,575.42 Mhz
1.023 MHz chip rate
Built-in patch antenna
Li-Polymer rechargeable 700mAh
7 meters RMS
0.1 m/sec without SA
1 microsecond synch. To GPS time
12/38/60 sec
1 sec
NMEA0183 V3.0
Tracking : -152dBm typ.
Acquisition : -139dBm typ.
Up to 10 hrs (after full charge)
300 hrs.
-10°C to 60°C
-20°C to 75°C
10 meters
(L)80*(W)58*(H)18
CE, FCC
CELLINK CO., LTD.
11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C.
TEL: +886-2-26962773 FAX: +886-2-26962774
Product Description:
Communicate with host platform via Bluetooth Serial Profile.
Sony high performance and low power consumption chipset.
16 channel parallel tracking.
Supported NMEA 0183 command: GGA, GSA, GSV, RMC, GLL, VTG.
5 LED indicators to show status of Bluetooth/GPS/battery/charging.
Non-slip on the bottom.
High performance Li-Polymer rechargeable 700 mAh.
CELLINK CO., LTD.
11F, No.102, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei, Taiwan, R.O.C.
TEL: +886-2-26962773 FAX: +886-2-26962774
Chapter 2 Installation and Usage
Step1: battery charging
Ensure your batteries are fully charged before you start to use your
Bluetooth GPS receiver. Both AC travel charger and DC car charger are
included in the package. The power jack is located in the jack cap. Open the cap
and connect the charger into the power jack.
To use AC travel charger, simply plug it into any electrical socket.
To use DC car charger, simply plug it into cigarette lighter port of your car.
While charging, both LED indicators D5 (green) and D6 (red) are on.
While it’s done charging, D6 turns off and D5 remains on (green LED).
Step2: mapping software installation
Step3: GPS connection
Step4: Bluetooth connection
Step5: GPS navigation
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 9
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e92200f2-2294-453f-89c6-82d894e6e757
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:06:23 18:25:20+08:00
Create Date                     : 2005:03:25 10:48:28+08:00
Metadata Date                   : 2005:06:23 18:25:20+08:00
Document ID                     : uuid:44a2e614-aafe-4fdd-b87d-db58179f3ec5
Format                          : application/pdf
Title                           : Microsoft Word - Manual-BTG-7000-050309.doc
Creator                         : jean
Author                          : jean

EXIF Metadata provided by EXIF.tools