Centrak ITD736 Ambient Cyro Temperature Sensor ITD- 736H/736LT/736TO User Manual PowerPoint Presentation

Centrak, Inc. Ambient Cyro Temperature Sensor ITD- 736H/736LT/736TO PowerPoint Presentation

User Manual

© CenTrak 2014. All Rights Reserved. Proprietary and Confidential. Draft version subject to revision. ITD-736TH Ambient Sensor •Wireless operation over available over Wi-Fi network, CCX or 900 MHz •-40 ⁰C to 100 ⁰C (+/- 0.5 ⁰C) •2% RH; Accuracy (10-90%) •Reliable and accurate temperature and humidity sensing •Replaceable temperature and humidity calibrated modules for cost efficient yearly replacement •Configurable reporting rates •Local audible alerting when temperatures or conditions are sensed outside of parameters •Patented Guaranteed Data Delivery (GDD) for up to 30 days if network is down •Long battery life with low-battery alert feature •Configurable reporting rates •BLE connectivity for local setup and monitoring The ITD‐736TH is a temperature and humidity sensor that has the ability to sense environmental changes reliably and accurately with customizable reporting rates. The ITD-736TH Ambient Sensor is part of CenTrak’s family of environmental sensors. The devices enable a cost effective mechanism to ensure correct temperature and humidity levels in rooms or refrigerators. The ITD-736TH can generate alerts when temperatures or humidity levels are sensed above or below set parameters, and the system can provide logs which eliminate human error and the cost of manual documentation. The sensors will continue to monitor temperature and humidity in the event of a power outage, and have the ability to store measurements off line which can be transmitted when the network is restored. These sensors can operate over CCX, regular Wi-Fi or 902-928 MHz ISM band. Maintenance and management is easy. CenTrak’s family of environmental sensors offer extreme battery life, are fully configurable in the field and allow for wireless upgrades. CenTrak, Inc. 826 Newtown-Yardley Road Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com CenTrak 2017. All Rights Reserved. Proprietary and Confidential. ITD-736TH Ambient Sensor
© CenTrak 2014. All Rights Reserved. Proprietary and Confidential. Draft version subject to revision. ITD-736TH Ambient Sensor Technical Specifications Environmental/Cleaning Storage Temperature (Tag) -20 oC to +75 oC (for best battery life store at room temperature or below) Sealing Splash resistant Sensor cleaning method Wipe Cleaning Method Only. See CenTrak Disinfection Guide for Instructions Power Battery Type Single Lithium AA (replaceable) Operation Wi-Fi or 900 MHz 2.4 GHz (operates using CCX or Wi-Fi on 802.11 b/g) or 902-928 MHz ISM band BLE (Bluetooth) 2.4 GHz (operates according to BLE protocol) Display Multi-line display LED indicator YES NIST traceable calibration YES Battery Replacement YES, single screw Temperature Range (accuracy) 0 oC to 70 oC +/- 0.5 oC, 2% RH Humidity Ranges (accuracy) 2% RH (10 - 90%) 4% RH (0% - 100%) Sensor Dimensions Case Length 2.7 in (68 mm) Case Height 4.5 in (114 mm) Case Width 0.8 to 0.9 in (21 to 24 mm) Case Weight (with battery) 4 oz. (114 g) Construction PC/ABS Mixture Durability Tough, impact resistant and temperature stable CenTrak, Inc. 826 Newtown-Yardley Road Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com CenTrak 2017. All Rights Reserved. Proprietary and Confidential. ITD-736TH Ambient Sensor This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Modifying or tampering with the transceiver’s or receiver’s internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425, 7,061,428, 7,378,964, 7,619,532. L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. *Available features may vary based upon the mode of operation
IC Statement per the requirements in RSS-Gen Section 8.4 and RSP-100 Section 4. English: This component complies with Industry Canada ’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Warning: For mobile or fixed location transmitters, the minimum separation distance between the antenna & radiating structures of the device and nearby persons is 20 cm, even if calculations indicate that the MPE distance would be less. 
© CenTrak 2015. All Rights Reserved. Proprietary and Confidential. Draft version subject to revision. ITD-736LT Cryo Sensor CenTrak, Inc. 826 Newtown-Yardley Road Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com •Wireless operation available over CCX, regular WiFi Wi-Fi or 900 MHz ISM band •-90 °C to -30 °C (+/- 0.5 °C) •Reliable and accurate temperature sensing •Patented Guaranteed Data Delivery (GDD*) after network outage via stored data •NIST traceable calibration •Instant button-initiated temperature measurement •Multiple cable lengths and types for a variety of applications •Multi-year battery life with low-battery alerting feature •Local audible and LED visual alerts when outside user-selected range •Configurable reporting rates •Door ajar sensing •BLE connectivity for local setup and monitoring All of CenTrak Environmental Sensors, like the ITD-736LT, are designed to eliminate manual measurements and meet regulatory requirements. The sensors use high quality probes to ensure accurate measurement and reliable performance. Data storage secures temperature readings during network outages and delivers the data to eliminate and data gaps. The ITD-736LT, is a probe‐based temperature sensor that has the ability to precisely monitor the temperatures required for cryogenic or extreme low temperature storage and handling. The sensor comes equipped with LCD screen, cryogenic probe and buffer agent. The device enables a cost effective mechanism to ensure critical items are stored at desired cold temperatures. The ITD-736LT, can generate alerts when temperatures are sensed above or below set parameters, and the system can provide temperature logs which eliminate human error and the cost of manual documentation. The sensors will continue to monitor temperature in the event of a power or network outage, and have the ability to store measurements off line which can be transmitted when the network is restored. These sensors can operate over any CCX or Wi-Fi network. Maintenance and management is easy. The CenTrak family of environmental sensors offer extreme battery life, are fully configurable in the field and allow for wireless upgrades. Reporting rates can be customized down to a few seconds for application requiring high time resolution. ITD-736LT Cryo Sensor *Patented GDD CenTrak 2017. All Rights Reserved. Proprietary and Confidential. Ribbon Cable Probe ITA-781F (right).
© CenTrak 2015. All Rights Reserved. Proprietary and Confidential. Draft version subject to revision. Technical Specifications Environmental/Cleaning Storage Temperature (Sensor) -20 °C to 75 °C (for best battery life, store at room temperature or below) Sealing Splash resistant Sensor cleaning method Wipe Cleaning Method Only. See CenTrak Tag Disinfection Guide for Instructions Power Battery Type Single Lithium AA (replaceable) Operation* Wi-Fi or 900 MHz 2.4 GHz (operates using CCX or Wi-Fi on 802.11 b/g) or 902-928 MHz ISM band Bluetooth 2.4 to 2.485 GHz Number of probe ports 1 LED indicator YES Local Audible Alert YES NIST traceable calibration YES Battery Replacement YES Temperature Ranges (accuracy) -90 °C to –30 °C (+/- 0.5 °C) Sensor Dimensions Case Length 2.7 in (68 mm) Case Height 4.5 in (114 mm) Case Width 0.8 to 0.9 in (21 to 24 mm) Case Weight (with battery) 4 oz. (114 g) Construction PC/ABS Mixture Durability Tough, impact resistant and temperature stable *Available features may vary based upon the mode of operation CenTrak, Inc. 826 Newtown-Yardley Road Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com Environmental Sensor Probes •ITA-781F •Available in 1’, 6’, 12’, and 25’ lengths with round probe cable. •Specify flat ribbon cable for door seal installs. CenTrak 2017. All Rights Reserved. Proprietary and Confidential. Other CenTrak Environmental Sensors •ITD-736TO Temperature Sensor •ITD-736TH Ambient Sensor ITD-736LT Cryo Sensor This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Modifying or tampering with the transceiver’s or receiver’s internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425, 7,061,428, 7,378,964, 7,619,532. L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
IC Statement per the requirements in RSS-Gen Section 8.4 and RSP-100 Section 4. English: This component complies with Industry Canada ’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Warning: For mobile or fixed location transmitters, the minimum separation distance between the antenna & radiating structures of the device and nearby persons is 20 cm, even if calculations i indicate that the MPE distance would be less. 
© CenTrak 2015. All Rights Reserved. Proprietary and Confidential. Draft version subject to revision. ITD-736TO Temperature Sensor CenTrak, Inc. 826 Newtown-Yardley Road Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com •Operates using CCX, regular WiFi or the 900 MHz ISM band •Reliable and accurate wireless temperature sensing •-40 °C to 100 °C (+/- 0.5 °C maximum) •Rotating display to support multi-direction sensor mounting •Long battery life with low-battery alert feature •Configurable reporting rates •Local audible alerting when temperatures or conditions are sensed outside of parameters •Onboard backup storage with Patented Guaranteed Data Delivery (GDD) for up to 30 days in case of network disruptions •Door ajar sensing •BLE connectivity for local setup and monitoring All of CenTrak’s Environmental Sensors, like the ITD-7386TO, are designed to eliminate the need to take continual manual measurements 24/7 to meet regulatory requirements. The sensors use high quality probes, rather than thermistors, to ensure accurate and reliable read performance, with back up storage to secure readings at all times. The ITD‐736TO is a probe‐based temperature sensor that has the ability to monitor a wide range of temperatures, from freezers to above room temperature reliably and accurately with customizable reporting rates. The sensor comes equipped with two ports for to support door ajar sensing and temperature sensing. The build-in display allows for immediate temperature viewing. The device enables a cost effective mechanism to ensure critical items are stored at desired temperatures. The ITD-736TO can generate alerts when temperatures are sensed above or below set parameters, and the system can provide temperature logs which eliminate human error and the cost of manual documentation. The sensors will continue to monitor temperature in the event of a power outage, and have the ability to store measurements off line which can be transmitted when the network is restored. These sensors can operate over any CCX or Wi-Fi network. Maintenance and management is easy. CenTrak’s family of environmental sensors offer extreme battery life, are fully configurable in the field and allow for wireless upgrades. ITD0736TO Temperature Sensor Buffer agent accessory (left). Available in small and large sizes. ITA-740, ITA-741 CenTrak 2017. All Rights Reserved. Proprietary and Confidential.
© CenTrak 2015. All Rights Reserved. Proprietary and Confidential. Draft version subject to revision. ITD-736TO Temperature Sensor Technical Specifications Environmental/Cleaning Storage Temperature (Sensor) -20° C to +75° C (for best battery life store at room temperature or below) Sealing Splash resistant Sensor cleaning method Wipe Cleaning Method Only. See CenTrak Tag Disinfection Guide for Instructions Power Battery Type Single Lithium AA (replaceable) Operation Wi-Fi or 900 MHz 2.4 GHz (operates using CCX or Wi-Fi on 802.11 b/g) or 902-928 MHz ISM band Bluetooth 2.4 to 2.485 GHz Number of probe ports 1 LED indicator YES Local Audible Alert YES NIST traceable calibration YES Battery Replacement YES Temperature Ranges -40°C to 100C (0.5°C accuracy) Sensor Dimensions Case Length 2.7 in (68 mm) Case Height 4.5 in (114 mm) Case Width 0.8 to 0.9 in (21 to 24 mm) Case Weight (with battery) 4 oz. (114 g) Construction PC/ABS Mixture Durability Tough, impact resistant and temperature stable CenTrak, Inc. 826 Newtown-Yardley Road Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Modifying or tampering with the transceiver’s or receiver’s internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425, 7,061,428, 7,378,964, 7,619,532. L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. CenTrak 2017. All Rights Reserved. Proprietary and Confidential. ITD0736TO Temperature Sensor *Available features may vary based upon the mode of operation
IC Statement per the requirements in RSS-Gen Section 8.4 and RSP-100 Section 4. English: This component complies with Industry Canada ’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Warning: For mobile or fixed location transmitters, the minimum separation distance between the antenna & radiating structures of the device and nearby persons is 20 cm, even if calculations indicate that the MPE distance would be less. 

Navigation menu