Central Aquatics 15720 Wireless Remote Controller User Manual Manual OptiBright

Download:
Mirror Download [FCC.gov]
Document ID	2670051
Application ID	sTqkOtIemXGOEJT15X7Jkg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	101.46kB (1268298 bits)
Date Submitted	2015-07-07 00:00:00
Date Available	2015-07-07 00:00:00
Creation Date	2015-07-01 09:24:35
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2015-07-01 09:24:35
Document Title	Microsoft Word - Manual_OptiBright+
Document Creator	PScript5.dll Version 5.2.2
Document Author:	lenovo

OptiBrightTM+ LED Light
Owner’s Manual
FIXTURE INSTALLATION INSTRUCTIONS
4. The light fixture will turn on to a standard setting and you can now program the fixture to your preferred settings
using the included remote. (Initial standard setting is set to white LED, Blue LED and Purple RGB)
REMOTE LAYOUT
REMOTE INSTRUCTIONS
Installing the Batteries
1. Remove the cover from the back of the remote.
2. Install 2 (AAA) batteries (included).
3. Close the cover – the remote is now be ready for use.
Setting the Time
1.
Press and hold
for 3 seconds until you see the hour blinking
2.
Use the
and
3.
Press
. The minutes will be blinking. Use the
4.
Press
. The time will be set.
buttons to set the hour – ‘AM/PM’ will be displayed on the screen.
and
buttons to set the minute.
Programming Desired Color Options
Set the fixture to the desired color combination by following the steps below:
1. Setting the White LEDs
a.
Press
to turn the White LEDs on – ‘W’ will be displayed on the screen.
b.
Use the
and
buttons to adjust the color intensity of the White LEDs only.
2.
3.
c. Press
to turn the White LEDs off.
Setting the Blue LEDs
a.
Press
to turn the Blue LEDs on – ‘B’ will be displayed on the screen.
b.
Use the
and
buttons to adjust the color intensity of the Blue LEDs only.
c. Press
to turn the Blue LEDs off.
Setting the RGB Color Option
a. Press one of the 8 preset color options to turn the RGBs on – ‘RGB’ will be displayed on the screen.
b.
Use the
c.
Press
and
buttons to adjust the color intensity of the RGBs only.
to turn the RGBs off.
Note: To program different color intensities for each of the White, Blue and RGB’s – each specific color must be on by itself.
If all three colors (or two) are on at the same time the intensity will be adjusted for all 3 colors to the same intensity. Ex: If
you see ‘W’ on the screen and you use the
and
buttons, the color intensity will be set for only the White LEDs. If
you see ‘W’ and ‘B’ on the screen at the same time and you use the
for the same amount for both the White AND Blue LEDs.
4.
and
buttons, the color intensity will be set
You are now ready to program the timer to your desired settings. Make sure your desired colors are in the ‘ON’ setting before you
start programming. ‘W’, ‘B’ and ‘RGB’ should be displayed on the screen.
Programming the Timer
1.
Press and hold
2.
Press
twice – you will see ‘W’ and ‘ON’ on the screen to set the White LEDs ON.
3.
Use the
and
4.
Press
. The minutes will be blinking. Use the
5.
Press
– you will see ‘W’ and ‘OFF’ on the screen to set the White LEDs OFF. Repeat steps 3-4.
6.
Press
– you will see ‘B’ and ‘ON’ on the screen to set the Blue LEDs ON. Repeat steps 3 & 4.
7.
Press
– you will see ‘B’ and ‘OFF’ on the screen to set the Blue LEDs OFF. Repeat steps 3 & 4.
8.
Press
– you will see ‘RGB’ and ‘ON’ on the screen to set the RGBs ON. Repeat steps 3 & 4.
9.
Press
– you will see ‘RGB’ and ‘OFF’ on the screen to set the RGBs OFF. Repeat steps 3 & 4.
10. Press

for 3 seconds until you see the hour blinking.
buttons to set the hour – ‘AM/PM’ will be displayed on the screen.
and
buttons to set the minute.
– your fixture is now programmed to your custom settings.
Note: If you don't want to set the LEDs to turn on/off you leave them both at 12:00AM.
RGB Scroll Mode
1.
Press
a.
b.
c.
d.
to scroll through the different color options at different speeds.
25 – Color will change every 5 seconds.
50 – Color will change every 4 seconds.
75 – Color will change every 3 seconds.
100 – Color will stop scrolling and be set to the color you selected.
FCC Certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : lenovo
Create Date                     : 2015:07:01 09:24:35+08:00
Modify Date                     : 2015:07:01 09:24:35+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - Manual_OptiBright+
Creator                         : lenovo
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:1e77a986-d705-4738-8975-afc7be841ec8
Instance ID                     : uuid:51db6a73-277b-4e19-8f50-c5051f91a259
Page Count                      : 6

EXIF Metadata provided by EXIF.tools