Centrica Hive SLP2C Smart Plug User Manual

Centrica Connected home Limited Smart Plug

Contents

User Manual

User guideGuía de usuarioMode d’emploiHive Active Plug™ Starter PackMDSmart Plug Trousse de démarrage
3ENGLISHENGLISH2Your Hive HubYour hub is the heart of your Hive system. It lets all of your Hive devices talk to each other and allows you to control them from your smartphone, tablet or laptop anytime, anywhere.Getting started: 1 Connect your hub • Connect your hub to your internet router usin the Ethernet cable in the box. • Connect your hub to an electrical outlet usin the power cable in the box. • For the hub to work at its best you should avoid placin it on the floor or in an enclosed area such as a cabinet. A table or shelf are better options, if possible.Welcome to HiveLet’s et started settin up your account. Just download the Hive app or visit hivehome.com/registration to enter in your details. Once your account has been confirmed, you can loin throuh the Hive app and start pairin your devices. If you already have an account with us, don’t worry about this step.
4 2 Activate your Hub • Lo-in usin the Hive app or the online dashboard, and enter the hub ID when prompted. This is the 6 character code which you’ll find on the bottom of the hub.Remember: For your Hive devices to work correctly your hub must be kept plued in and switched on. 3 That’s it! You can now pair your other Hive devices by tappin Install devices in the app or online dashboard.Your Hive Active Plug™Your Hive Active Plu™ will allow you to turn appliances on or off remotely and set schedules for when they are on. Getting started: 1 Add your Hive Active Plug™ You can do this usin your Hive app or the online dashboard. Using the Hive app: • Open the Hive app on your smartphone or tablet, you may be asked to lo-in. • Tap the Menu button and then Install devices, then follow the on- screen instructions.Using the online dashboard:• Lo into your Hive account at hivehome.com • Under Settings select Install devices, then follow the on-screen instructions.5ENGLISHENGLISHUsage Your Hive Hub is desined for indoor use only.Maintenance Disconnect your Hive Hub before cleanin and keep it away from water and other liquidsat all times. The hub does not contain any serviceable parts so do not attempt to open it.If for any reason you need to return your Hive Hub, simply return your box and its contents to the retailer. Any return is subject to the retailer’s refund policy so please don’t foret to check the retailer’s refund policy too.By usin the Hive Hub and other Hive products, you aree to our terms and conditions, which can be found at hivehome.com/termsandconditions.
2 Plug it in and switch the power socket on Once plued in the LED liht on the front of your plu will bein to flash amber while it searches to find your hub. Once your Hive Active Plu™ appears on the screen, you can name it and press Save to complete setup. 3 That’s it! The LED liht on your Hive Active Plu™ will stop flashin once connected. Now you can plu in the device you’d like to control remotely.If for any reason you need to return your Hive Active Plu™, simply return your box and its contents to the retailer. Any return is subject to the retailer’s refund policy so please don’t foret to check the retailer’s refund policy too.By usin the Hive Hub and other Hive products, you aree to our terms and conditions, which can be found at hivehome.com/termsandconditions.Remember: To use your Hive Active Plu™ leave the device and the power to the electrical outlet switched on, includin the extension cable if you’re usin one.6Can we help? You can view our handy how-to-use videos alon with hints and tips at hivehome.com/support.7ENGLISHENGLISHUsage Your Hive Active Plu™ is desined for indoor use only.For your safety Your Hive Active Plu™ is not a circuit breaker and does not contain a fuse, RCD or any other similar device. If you’re usin your Hive Active Plu™, whether at home or away, with appliances like kettles, heaters and hair straihteners, please remember to follow the safety advice for use of those appliances. For example, ensure electric heaters are not covered with clothin or other items. Earthing The earth connection from the wirin in your home is passed throuh to the earth connection of the front socket on the Hive Active Plu™. It is safe to connect equipment which relies on an earth connection for safety.Maintenance Disconnect your Hive Active Plu™ before cleanin and keep it away from water and other liquids at all times. The Hive Active Plu™ does not contain any serviceable parts so do not attempt to open it.Download the Hive app.
hivehome.comHA/DE/ALSPK/UG/0916Imported by Hive, the tradin name of Centrica Connected Home US Inc., 12 Greenway Plaza, Ste 250, Houston TX 77046. Imported by Hive, the trading name of Centrica Connected Home Canada Inc., Suite 1850, 10303 Jasper Avenue, Edmonton AB, T5J 3N6. Importé par Hive, le nom commercial de Centrica Connected Home Canada Inc., Suite 1850, 10303 Jasper Avenue, Edmonton AB, T5J 3N6.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.IC STATEMENTThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.The distance between user and device should be no less than 20cm.la distance entre l'utilisation et l'appareil ne doit pas être inférieure à 20 cm.FCC Statementwith the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu