Centrica Hive SLP2C Smart Plug User Manual

Centrica Connected home Limited Smart Plug

Contents

User Manual

Download: Centrica Hive SLP2C Smart Plug User Manual
Mirror Download [FCC.gov]Centrica Hive SLP2C Smart Plug User Manual
Document ID3432756
Application IDpg8Zil7itnxnz+3Rovd4OQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize25.74kB (321812 bits)
Date Submitted2017-06-21 00:00:00
Date Available2017-06-21 00:00:00
Creation Date2016-08-04 15:50:46
Producing SoftwareAdobe PDF Library 11.0
Document Lastmod2017-06-20 15:27:34
Document TitleUser Manual
Document CreatorAdobe InDesign CC 2014 (Macintosh)

Hive Active Plug™ Starter Pack
Smart Plug
Trousse de démarrage
MD
User guide
Guía de usuario
Mode d’emploi
Let’s get started setting up your account. Just download the Hive app
or visit hivehome.com/registration to enter in your details. Once your
account has been confirmed, you can login through the Hive app and
start pairing your devices.
ENGLISH
If you already have an account with us, don’t worry about this step.
Your Hive Hub
Your hub is the heart of your Hive system. It lets all of your Hive devices talk
to each other and allows you to control them from your smartphone, tablet
or laptop anytime, anywhere.
Getting started:
Connect your hub
•	
Connect your hub to your internet
router using the Ethernet cable in
the box.
•	
Connect your hub to an electrical outlet
using the power cable in the box.
•	
For the hub to work at its best you
should avoid placing it on the floor
or in an enclosed area such as a
cabinet. A table or shelf are
better options, if possible.
ENGLISH
Welcome to Hive
Activate your Hub
•	Log-in using the Hive app or the online dashboard, and enter the
hub ID when prompted. This is the 6 character code which you’ll
find on the bottom of the hub.
Remember: For your Hive devices to work correctly your hub must be kept
plugged in and switched on.
ENGLISH
That’s it!
You can now pair your other Hive devices by tapping Install devices
in the app or online dashboard.
Usage
Your Hive Hub is designed for indoor use only.
Maintenance
Disconnect your Hive Hub before cleaning and keep it away from water and other liquids
at all times. The hub does not contain any serviceable parts so do not attempt to open it.
Your Hive Active Plug™
Your Hive Active Plug™ will allow you to turn appliances on or off remotely
and set schedules for when they are on.
Getting started:
Add your Hive Active Plug™
You can do this using your Hive app or the online dashboard.
Using the Hive app:
•	
Open the Hive app on your
smartphone or tablet, you
may be asked to log-in.
•	
Tap the Menu button
and then Install devices,
then follow the onscreen instructions.
Using the online dashboard:
•	
Log into your Hive account at
hivehome.com
•	
Under Settings select Install
devices, then follow the onscreen instructions.
ENGLISH
If for any reason you need to return your Hive Hub, simply return your box and its contents
to the retailer. Any return is subject to the retailer’s refund policy so please don’t forget to
check the retailer’s refund policy too.
By using the Hive Hub and other Hive products, you agree to our terms and conditions,
which can be found at hivehome.com/termsandconditions.
Plug it in and switch the power socket on
Once plugged in the LED light on the front of
your plug will begin to flash amber while it
searches to find your hub.
Once your Hive Active Plug™ appears on the
screen, you can name it and
press Save to complete setup.
ENGLISH
That’s it!
The LED light on your Hive Active Plug™ will
stop flashing once connected. Now you can
plug in the device you’d like to control remotely.
Download the Hive app.
Usage
Your Hive Active Plug™ is designed for indoor use only.
For your safety
Your Hive Active Plug™ is not a circuit breaker and does not contain a fuse, RCD or any other
similar device.
If you’re using your Hive Active Plug™, whether at home or away, with appliances like kettles,
heaters and hair straighteners, please remember to follow the safety advice for use of those
appliances. For example, ensure electric heaters are not covered with clothing or other items.
Earthing
The earth connection from the wiring in your home is passed through to the earth
connection of the front socket on the Hive Active Plug™. It is safe to connect equipment
which relies on an earth connection for safety.
Maintenance
Disconnect your Hive Active Plug™ before cleaning and keep it away from water and other
liquids at all times. The Hive Active Plug™ does not contain any serviceable parts so do not
attempt to open it.
ENGLISH
If for any reason you need to return your Hive Active Plug™, simply return your box and
its contents to the retailer. Any return is subject to the retailer’s refund policy so please
don’t forget to check the retailer’s refund policy too.
By using the Hive Hub and other Hive products, you agree to our terms and conditions,
which can be found at hivehome.com/termsandconditions.
Can we help?
Remember: To use your Hive Active Plug™ leave the device and the power to the
electrical outlet switched on, including the extension cable if you’re using one.
You can view our handy how-to-use videos along with hints and tips at
hivehome.com/support.
hivehome.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
The distance between user and device should be no less than 20cm.
la distance entre l'utilisation et l'appareil ne doit pas être inférieure à 20 cm.
HA/DE/ALSPK/UG/0916
FCC Statement
Imported by Hive, the trading name of Centrica Connected Home US Inc., 12 Greenway Plaza,
Ste 250, Houston TX 77046.
by Hive, the trading name of Centrica Connected Home Canada Inc.,
wImported
Suite 1850, 10303 Jasper Avenue, Edmonton AB, T5J 3N6.
Importé par Hive, le nom commercial de Centrica Connected Home Canada Inc.,
Suite 1850, 10303 Jasper Avenue, Edmonton AB, T5J 3N6.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2016:08:04 15:50:46+01:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2017:06:20 15:27:34+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:06:20 15:27:34+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:8d4f1507-f122-45f4-a65c-19ef1fc42c9a
Original Document ID            : xmp.did:bda8a9cc-c1c7-4e88-8d0b-f283bcaf82d9
Document ID                     : xmp.id:0055451e-e0ae-45e9-97c7-23d97dd6dca3
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:e68c486d-9c8a-4560-bbcb-962bbdd0a8ab
Derived From Document ID        : xmp.did:b2c69f88-1328-4221-bddf-882aa09de827
Derived From Original Document ID: xmp.did:bda8a9cc-c1c7-4e88-8d0b-f283bcaf82d9
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2016:08:04 15:50:46+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 5
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WJHSLP2C

Navigation menu