Chamberlain Group The 1255433 Remote control transmitter User Manual Instructions

Chamberlain Group Inc, The Remote control transmitter Instructions

Instructions

The Security✚remote control (with blue push buttons)works only with rolling code door openers and lightcontrols (with an orange SRT button and yellow indicatorlight). The code between the remote control and thereceiver changes with each use, randomly accessing over100 billion new codes.Instructions are given below for programming youropener to match the remote control's code. Theadditional remote control buttons can also activate otherSecurity✚garage door openers and/or light controls.(Instructions for programming light products areincluded with those accessories.)®433MHz 3-Function Remote ControlTo comply with FCC rules, adjustment or modifications of this receiver and/ortransmitter are prohibited, except for changing the code setting or replacing thebattery. THERE ARE NO OTHER USER SERVICEABLE PARTS.SECURITY✚GARAGE DOOR OPENERSProgram the Opener to Acceptthe Remote Control CodeSelect a remote control push button to operate the receiver.The large button is recommended for use with the garagedoor opener.If you have a Premium Control Console:1.With the door closed, press and hold the selected remotepush button. See Figure 1.2. Press and hold the Light button on the door control, Figure2.3. Press and hold the door control push button.4. After the opener light flashes, release all buttons.If you do not have a Premium Control Console:1. Press and hold the selected remote push button. SeeFigure 1.2. Press and release the SRT (learn) button on the openerpanel. See Figure 3.The indicator light on the panel willbegin to blink and the opener light will flash once.3. Release the remote push button.Now the opener will operate when that remote control buttonis pressed. Test it by pressing the remote button to see thatthe door goes up and down.To Erase All Remote Control CodesPress and hold the SRT button on the opener panel until theindicator light turns off (about 6 seconds). All remote codesare now erased. Then follow the steps above to re-programeach remote control.To Control the Opener Light (Premium Consoles)With Security✚remote controls, a push button can beprogrammed to operate the opener light without opening thedoor.1.With the door closed, press and hold the remote buttonthat you want to control the light.2. Press and hold the Light button on the door control.3. Press and hold the Lock button on the door control.4. After the opener light flashes, release all buttons.Test by pressing the remote push button. The opener lightshould turn on or off but the door should not move.Orange SRT (learn)ButtonYellow IndicatorLight123OWNER’S MANUALChildren operating or playing with a garage dooropener can injure themselves or others. The garagedoor could close and cause serious injury or death.Do not allow children to operate the door pushbutton(s) or remote control(s).A moving garage door could injure or kill someoneunder it.Activate the opener only when you can seethe door clearly, it is free of obstructions, and isproperly adjusted.WARNINGFigure 3Figure 2Select a push button to operate openerFigure 1Code programminginstructions are alsolocated on the openerpanel.LOCKLIGHTLightDoor ControlPush buttonLockPREMIUMCONTROL CONSOLE3-FUNCTIONREMOTE CONTROLSECURITY✚GARAGE DOOR OPENERThe Remote Control BatteryThe lithium battery should producepower for up to 5 years. To replacethe battery, use the visor clip orscrewdriver blade to pry open the case, asshown. (“Open” location is stamped on back ofcase.) Insert battery positive side down. To replacecover, insert the 3 tabs at the opposite end and snap shut. Dispose of old battery properly.Replacement Parts:SECURITY✚ 3-Function remote control housingonly (no circuit board) – 41A5032; 3V 2032Lithium Battery – 10A20; Visor Clip – 29B134. When ordering parts, always provide the followinginformation:• Product Type • Part Number• Model Number • Part DescriptionFor the repair or replacement parts you needCall 7 am – 7 pm, 7 days a week:1-800-366-PART(1-800-366-7278)Keep batteries away from small children. Ifswallowed, promptly notify doctor.WARNINGOpen this endfirst to avoidcrackinghousingFOR 433MHz© 1998, Sears Roebuck & Company114A2334 All Rights Reserved Printed in Mexico

Navigation menu