Chamberlain Group The 2392 Remote Control Transmitter User Manual 114A3485 3c
Chamberlain Group Inc, The Remote Control Transmitter 114A3485 3c
Exhibit D Users Manual per 2 1033 b3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 861125 |
| Application ID | GVUyt4/CG45jDANSbpHcMA== |
| Document Description | Exhibit D Users Manual per 2 1033 b3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 109.32kB (1366514 bits) |
| Date Submitted | 2007-10-29 00:00:00 |
| Date Available | 2007-10-29 00:00:00 |
| Creation Date | 2007-07-19 09:14:55 |
| Producing Software | Acrobat Distiller 8.1.0 (Macintosh) |
| Document Lastmod | 2007-07-19 09:17:22 |
| Document Title | 114A3485(3c) |
| Document Creator | QuarkXPressâ„¢: AdobePS 8.5.1 |
| Document Author: | krista Hartzell |
CLICKER MODEL KLIK1U To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door: • ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote control transmitters. • Activate gate or door ONLY when it can be seen clearly, is properly adjusted and there are no obstructions to door travel. • ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door. Universal Garage Door Opener Remote Control Read instructions thoroughly BEFORE beginning. Start with garage door closed. Identify garage door opener type - Smart/Learn button or DIP Switch. Smart/Learn button or DIP Switches are located on motor unit or external receiver. Refer to owner’s manual if necessary. Proceed with instructions according to your type of garage door opener. DIP SWITCH SMART/LEARN BUTTON See Chart A to determine # of times to press button and write in blank on step 5. CHART A CHART B # of times to press button Brand Description Frequency # of times to press button Brand Type/Color of Smart/Learn Frequency 11 12 Chamberlain Chamberlain 390 MHz 13 14 15 16 17 18 Genie Linear Multicode Chamberlain Stanley/Multicode Genie Linear Moore-O-Matic Chamberlain 9 Position 9 Position Canada 12 Position 10 Position 8 Position 10 Position 9 Position Mega-Code Orange Purple Green 318 390 315 390 Intellicode 315 MHz 8 Position 7 Position 310 MHz 390 MHz Linear Chamberlain Chamberlain Chamberlain Genie Overhead Door Genie Overhead Door Stanley Wayne Dalton Intellicode Secure Code Rolling Code 390 MHz 310 MHz 372.5 MHz 19 315 390 300 390 310 390 MHz MHz MHz MHz MHz MHz DIP SWITCH SMART/LEARN BUTTON OR 10 11 12 MHz MHz MHz MHz See Chart B to determine # of times to press button and write in blank on step 5. Existing Remote Clicker Remote Press program button until LED lights. Match DIP switches. Turn extra switches OFF. Motor Unit KG Press program button until LED lights. Press and release the smart/learn button. Button 2 Button 1 Select a button to program. Press button times ensuring LED stops flashing after each press. Code is accepted when door activates. Button 2 Button 1 Select a button to program. Press button times ensuring LED stops flashing after each press. Code is accepted when one of the following occurs: REMOTE CONTROL BATTERY To prevent possible SERIOUS INJURY or DEATH: • NEVER allow small children near batteries. • If battery is swallowed, immediately notify doctor. KG OR OR The lithium battery should produce power for up to 5 years. Press program button. To reduce risk of fire, explosion or chemical burn: • Replace ONLY with 3V2032 coin batteries. • Do NOT recharge, disassemble, heat above 100°C (212°F) or incinerate. Press program button. Dispose of batteries properly. Replace battery with 3V2032 coin cell battery only. 10 11 12 Programming complete. Press selected button to test. NOTE: Products other than Chamberlain: If programming fails reverse dip switches (OFF to ON and ON to OFF). Chamberlain products: For Chamberlain remotes DO NOT use the “0” position, use “+” or “-”. If you already have a 3-button remote, DIP switch #1 must be set to “-” if the large button is to open the door. It may be necessary to reprogram original remote controls. 114A3485 NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Programming complete. Press selected button to test. www.clickerproducts.com • 1-800-442-1255 Chamberlain, LiftMaster and Moore-O-Matic are Trademarks of Chamberlain Group. Genie is a Trademark of Overhead Door Corporation. Linear is a Trademark of Linear Corporation. Stanley is a Trademark of The Stanley Works. © 2007, Clicker Corporation All Rights Reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Format : application/pdf Title : 114A3485(3c) Creator : krista Hartzell Create Date : 2007:07:19 09:14:55-07:00 Modify Date : 2007:07:19 09:17:22-07:00 Creator Tool : QuarkXPress™: AdobePS 8.5.1 Metadata Date : 2007:07:19 09:17:22-07:00 Producer : Acrobat Distiller 8.1.0 (Macintosh) Document ID : uuid:5f8de43a-315b-4f0d-8f7a-91150eca9466 Instance ID : uuid:c6ab2d58-0ab6-463d-835f-991f8e2d07c8 Part : 1 Conformance : B Page Count : 1 Author : krista HartzellEXIF Metadata provided by EXIF.tools