Chamberlain Group The 7779 Remote Control Transmitter User Manual eCopy Inc

Download:
Mirror Download [FCC.gov]
Document ID	1688071
Application ID	6Gu1ngj7GJ+ULamLZBwsXA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.14kB (251725 bits)
Date Submitted	2012-05-02 00:00:00
Date Available	2012-05-02 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	eCopy, Inc.
Document Lastmod	0000-00-00 00:00:00
Document Title	eCopy, Inc.
Document Creator	eCopy, Inc.

Lift Master.
INTROIIIIOTION
For use with Security-o- 2.0” garage door openers that have a yellow
“Learn" button. The wireless control panel can be used to as a secondary
device to open and close your garage door, and to turn on and 011 your
garage door opener lights,
FEATURES
PUSN BAR
Press the push bar to open and close the garage door. When the push
bar is pressed, the LED behind the push bar will blink when transmitting
a signal. To conserve battery power, the LED will turn oil when not in
use. lithe LED does not light when the push bar is pressed, the battery
power is low. Replace the battery.
LIGNT BUTTON
Press the Light button to turn the garage door opener lights on or oft.
When the lights are turned on they will stay on until the Light button is
pressed again. or until the garage door opener is activated. Once the
garage door opener is activated the lights will turn off atterthe specified
period 01 time (the lactory setting is 4-112 minutes). The Light button will
not control the lights when the door is in motion.
PROGRAMMING TNE WIREESS CONTROL PANEL
Choose an option below to program the wireless door control.
Option A
ll programming with a Garage Door Opener “Learn" Button
1. Press and release the “Learn" button on the garage door opener.
2. Within 30 seconds. press and hold the push bar on the wireless
control panel.
3. Release the button when the garage door opener light blinks. I1 light
bulbs are not Installed, two clicks will be heard. Proceed to Test.
Option I
ll programming wlth a Premium Motion Detection or MuIlI-Funcllon
control Panel
1. Press and release the “Learn" button. The command LED will bllnk.
2, Press and release the “Learn" button again, The command LED blinks
again,
3. Within 30 seconds. press and hold the push bar on the wireless
control panel.
4. Release the button alter the garage door opener lights bllnk or two
clicks are heard. Proceed to Test.
Optiln I:
It programming with a Smart Control Panolfit
Using the navigation button:
1. Press the navigation button below “MENU' and proceed to
“PROGRAM".
2. Select “REMOTE” then press nto continue.
3. Within 30 seconds, press and hold the push bar on the wireless
control panel.
4. Release the button alter the garage door opener lights blink or two
clicks are heard. Proceed to Test.
TEST TNE WIRELESS OOIITRG. PANH.
To test. press the push bar on the wireless control panel. The garage
door will open or close. Next, press the light button on the wireless
control panel. The garage door opener Ilghts should turn on or off. It not
repeat the programming steps.
NOTE: The wireless control panel will continue to activate the garage door
opener I! a wired control barrel has been placed into Lock mode.
SECURITY-l- 2.OWI WIRELESS CONTROL PANEL
MODEL OOSLM
A WARNING
To prevent possible SERIOUS INJURY or DEATH from a moving gate
or garage door:
0 Install door control within sight oi garage door, out 01 reach o1
children at a minimum height ol 5 leet (1.5 m), and away from ALL
moving pans ol door.
- NEVER pennil children to operate or play with door control push
buttons or remote control transmitters.
~ Activate door ONLV when it can be seen clearly. is propeny adjusted
and there are no obstructions to door travel.
- ALWAVS keep garage door in sight until completely closed. NEVER
permit anyone to cross path of closing garage door.
IARAEE DOOR OPENER
"Luau“ eumlt
Light Button
PREMIUM Motion OEchTIIIO
on uumruucrlnn
communist.
storm conmoi. rAurL®
‘ > ”‘o "7
I] 1290 [131.er
o ‘v’
Navigatmnfluttons
TO ERRSE ALL OODES FROM GARAGE DOOR OPENER MEMORY
(REMOTE CONTROLS, KEVLESS ENTRIES AIlID
WIRELESS CONTROL PANEL)
To deactivate the accessories, first erase all codes:
Press and hold the ‘Leam" button on the garage door
opener until the learn indicator light goes out
(approximately 6 seconds), All previous codes are now
erased. Reprogram each remote control. keyless entry or
wireless control panel you wish to use.
INSTALLATION
NOTE: lnstall the door control within sight of the garage door at a
minimum height of 5 feet {1.5 m) where small children cannot reach, and
away from the moving parts of the door.
1. Mark the location of the bottom mounting hole and drill a 5/32“
(4 mm) hole.
2. Install the bottom screw, allowing 1/8" (3 mm) to protrude hunt the
wall.
3. Position the bottom hole of the control panel overthe screw and slide
down into place.
4. Lift the push har up and mark the top hole.
5. Remove the wireless control panel trom the wall and drill a 5/32“
(4 mm) hole tor the top screw.
6. Position the bottom hole oi the door control over the screw and slide
down into place.
7. Attach the top screw and close the push bar.
WIRELESS CONTROL PANEL BATTERY
A WARNING
To prevent possible SERIOUS INJURV or DEATH:
- NEVER allow small children near batteries.
- It battery is swallowed. immediately notify doctor.
To reduce risk 01 lire. explosion or chemical burn:
- Replace ONLV with 3V2032 coin batteries.
~ DO NOT recharge, disassemble, heat above 212°F (100°C) or
incinerate.
The lithium battery should produce power lor up to
5 years. To replace the battery. remove the two screws
and the circuit board from the plastic housing. as shown.
Insert new battery positive side up (+).
Dispose of old battery property.
919
more i. mirvih rand/u IlIulry am on m mu." Mel-ltd ta nlm-‘nure mite-I. moms
In no snmmr runs toy no.“ n nuts-u Mull." lwml by it. only mum. hmuim mu ml in.
tllr‘itllhlivh um. n. m
le‘uml-nhhn ISJA-KufiturdltfidllLOp-llhrkfiflmnml-lbfirgmwifisfllmhmm
mtu-e hm nun-m. a! (mo his ImmqlowiM-m- rte-M int-t“ ind-mu nu mm mud
mm;
neo- lmlwmaws ill mu.- ham
Replacement Parts
3V2032 Lithium battery .................................. 10A20
WARRANTY
our ma urnnzo wnnmurv
The Chamberlain Group. Inc. warrants to the tirs1 consumer purchaser of
this product that it Is tree trom detect in materials and/or workmanship
tor a period on yeartrom the date of purchase.
1-300-523-9131
mJittmastencom
Lift Master.
IIITIIOIIUG‘I‘IIIII
A uriiiser avec Ies ouvre-pones de garage Security+ 2,0m gui compone nn bomon
a Learn » iaune, Le panneau de commande sans iil pent etre utilise oomme rm
dispositii secondaire pour ouvrir et fermer votre ports de garage on allumer el
eleindre Ies iémoins de votre ouvre»pone de garage.
CARABTERISTIEIUES
BIHHE-POUSSIHH
Appuyer sur la harre-poussoir pour ouvrir on ierrner Ia parts du garage. Lorsdue Ia
barre-poussoir est entonoee, Ie témoin DEL sltué derriere Ia oarre-poussoir se me\
a clignoler lors de la transmission d'un signal. Pour economisar la pile. Ie temoin
DEL s'éteinl Iorsgu'il n'est pas utilise. Si Ie temoin DEL rte s'allume pas Iarsdue Ia
barre-poussoir est enioncee, Ia pile est lalole. ii taut Ia remplacer.
eournu o-écumae:
Appuyer sur Ie houkon d‘eclairage pour allnmer ou etelndre I'eclalrage dc t'ouvre-
pone de garage, Quand Ies temains sont allumes, iIs resieront ainsi lusqu'a ce
qu'on appure a nouveau snr le oouton d‘éolalrage on gu'on metre louvre-pone de
garage sous tension. unand on met I'onvreAporie de garage sous tension. Ies
iémoins s'eteignent apres Ie oélal speciiié (le réglage d'usine est de 4 minutes et
demie). Ce bouton no permet pas de commander I'éclairage pendant que la pone
est en manvemeni.
PHWMMMATIOII Illl PAIIIIEAII llE GBMMMIIIE SAIIS FII.
selectlormer one option ci-dessous pour programmer la commando de pone sans
fll.
opuon A
Ell ca: lie progummatlon fl I'alde Ill! human « Learn » lie l'orrvre-lmm 1:
garage
1. Entoncer et relacher Ie houton « Learn » de I'ouvre—porte de garage.
2. Dans Ies 30 seconoes, appuyer sur la barre-poussoir du panneau de oommaride
sans oi et la garder enloncee.
3, Relacher le boulon Iorsgue Ie lemoin de Four/reports de garage clignote. SI Ies
ampoules ne sont pas posées, deux clics se leroni enlendre. Passer a la
rubriqne Miss a I ‘essal.
option I
Err on de pmgramnution d'nn plnnean de commando monlionetlon on a
ditecllnn do mnuvemem hall de gamma
I. Appuyer el relacirer Ie houlon d'apprentissage. Le temoin DEL de la commando
va clignoier.
2. Appuyer at relacher a nouveau Ie oouton d'apprentlssage. Le témoIn DEL de la
commande va a nouveau olignoter,
3. Dans Ies 30 secondes, appuyer sur la barre-poussolr du panneau de commands
sans til et la gamer enioncee.
4. Relacner Ie bauton une iois que lo temoin do I'anvre-porte do garage clignom do
one deux clics se lassenl enlendre. Passer a la rnhrique Miss a I ‘essali
Option 0
En us do prognmmallon d'un sman cummr Pm|®
Utilisation on booton de navigalio
1. Appuyer sur la houton de navigation situe sous u MENU », puls passer a
« PROGRAM k.
2, Sélectlonner « REMOTE ». puts appuyer sur u pour comlnuer.
3. Dans les 30 secondes, appuyer sur la barre-wussolr do panneau de commande
sans lil et la garder enioncee,
4. Relacher le bauton une iois one Ie temoin as I'ouvre-pgrte de garage clignote on
one deux ciics se lasseni entendre. Passer a la rnnrique Mise a I'essai.
MISE A l'ESSAI III PAHIIEAII IIE GDMMMIIIE SAKS FII.
Pour enectuer I'essai, appuyer sur la barre-poussoir du panneau de commands
sans lll. La gone on garage va s'ouvrir et se iermer. Ensuite, appuyer sur le nonlon
“chime (in panneau de commande sans lil.
Les temoins de l‘onvre-porte de garage doivent s'allumer on e'etelndre. Slnun,
répéter Ies etapes de pmgrammation.
nEllwaE : Le pan/mail dc commands sans fll cominuera a Iaire Vonctionner
Louvre-pone de garage si on a mis un pan/read do comma/m a” cattle all made de
vermuilLage
SEGURITY-I- 2.ll"" PAIIIIEAII DE COMMANDE'SMIS FII.
MIIIIEI.E 885LM
A AVERTISSEMENT
Pour prewenir d'eventuelles BLESSURES GRAVES on LA MDRT does a tilt
portail ou une pone de garage on mouvement :
~ Poser Ia commande de porte a portee do we de la pone de garage. hors de
la ponée des enlants a one hamsnr mlnlmum de 5 pieds (1,5 ml et a I'écan
de TOUTES Ies pieces mohlles de la pone.
- Me JAMAIS Iaisser des eniants talre tonnlionner Ies boulons-poussoirs de la
commando do gone on Ies émefleurs de la telecommande. ni iouer avec
oeux-ci.
- Actionner Ia pone UMIDUEMENT Iorsgu'on Ia voit clairemenl, qu'elle est oien
réglée ei one rien ne géne Ia oourse de la pone.
- TDUJOURS avoir I'mil sur la pone de garage rusgu'a sa iennelure complete.
Me JAMAIS Ialssev personne cruiser Ie chemin d‘une porte de garage gui se
lerme.
eourorr . LEAnn ,
n: L'nuvnE~Poan DE Boulnn « mam »
Game 51"?
pousson
Boutori
d'edalrage
mum! of commune
uuLnrommon on A
ntmmon n! Mowmsur
mun oE EAMME
Bunion do "av-gallon
nun EFFABEI'I mus LES CBDES DE [A MEMIIIIIE DU BUVIIE-PDIITE DE
WEE lTELfiODMMAHDE. ENTREE SAIIS CLE El PAIIIIEMI DE COMMAND!
SANS FIL)
Pour desaeliver mule accessnne non désirée, ellacer d'ahord
mus Ies codes:
Enlancer er lenlr le bornan « Learn » flu moleur iusqu’a ce que la 3
lemeln lumlneux learn s'éteiane (environ 6 secondesl. Tous les
codes précédenls sum mainlenanl eflacés. Reprogrammer
clraque telécnmmande, enlrée sans clé on panneau de
commands sans lil qll'on désrre utiliser.
INSTALLATION
nzmrmus: Paser Ie panneau de mmma/rde sans til pans rm end/oil air on
pvllrra vuirla none, a all moi/rs 5 pied: (1,5 m) m: sol, la or) Ies err/ants he
pour/om pas I ‘atieinflre a! loin He mules Ies pieces mew/es e! fixation: de la pone.
1. Marquer l'emplaoemenl du troll de lixalion inlerieur el percer un Iron de 5/32 pa
(4 mm).
2. Poser Ia vis inlérieure err Iaissanl1/8 po (3 mm) dépasser Ie mur.
3. Plater le trou inlérieur du panneau de commando snr Ia vls el lalre qlisser ce
dernier vars Ie has iusqu'a co qu'il son bien err place.
4. Suulwer la barre-puussoir at marquer le tron superieur,
5. Retirer le panneau de commande sans liI du rnur el percer un lmu de 5/32 pa
(4 mm) pour la vis superieure.
a. Placer le lrou inlérieur du panneau de commands sur la vls el lane glisser ce
dernier vers le has illsull'a ce qu‘il soil bier! err place.
7. Fixer Ia vis supérieure el lermer Ia barre-poussorr,
FILE III] PAIIIIEMI IIE BIIMMIIIIIIE SAIIS FII.
A AVERHSSEMENT
Pnur éviler des BLESSURES GRAVES, VDIRE MORTELLES :
~ Ne JAMAIS Iaisser des enianls s'approcllsr de la pile,
- Communiquer immedialemenl aver: un medecin err cas d‘ingesllen d‘une pile.
Pour reduire ls risque d'incendie, d'exploslon on de brirluve cnlmlque :
- La remplacer UNIOUEMENT par une prle noulon 3V2032.
- ME PAS la recharger, la demonler. Ia charmer a plus de 212 'F (100 'c) ou
l'Irrcirrérer.
La pile an Iilllillm devrail durer pendant lme période allanl
lusqu'a 5 ans. Pour remplacer la pile, relirer les deux vls et la
carle de clrcuil imprimé du hullier err plaslique, wmme rndiqué.
lnsérer Ia pile news on poinlanl le ems positil (a vers le haul.
Se déharrasser de la pile usée do maniere appropriee.
of’
AVIS:highs!-lnlfln/ulMfifird-flflmlmim-u-lmndfnl-ldmrhfll “mu
mmusrmwmrsnmmnmrlmrmrwmma- hmmilhi-lmmn‘ arm-i
uh mi man- i- r- lulu-M flow-u riwlldl‘lnmlnl'l u. I'uiimrd- r-‘n r-maml' rm»
murnfl-nrnmmmnmmm liluriuler-ldeh runhhm-xnmru-mm um-
mfluxmilk-mulls:l||“div-Iiir-urnrue-rhrhfimnmflhmlllmfifllhlflqu-h
M...- turn, 1 mlvkunIm-Mmc mailman m nmmm r-numfi,
(alumni-nim-fihrhlnwfinlhmmmuum.
FIRES I'll REMAIN]!
Pile au lithium 3V2032
SAMMIE
annular: errrrréE p'urr All
The Chamberlain Group, Inc. garanlil a l'achemur inilial de ce produil que ce
dernler est exempt do ueram de matériel au de labricalion pendant une periods
d'un an survanl la date d'acnal.
1-300-525-9131
rrrwrrrJIllmaslaLnnm
@ 2m 1. in: Chamberlain Emrrn. Inn.
All Rlvnls Reserved
mamas
Tolls drons itservés

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.266826, Mon Dec 18 2006 14:26:17
Format                          : application/pdf
Title                           : eCopy, Inc.
Subject                         : None
Creator Tool                    : eCopy, Inc.
Modify Date                     : 2012:04:30 09:03:06-05:00
Create Date                     : 2012:04:30 09:03:06-05:00
Metadata Date                   : 2012:04:30 09:03:06-05:00
Producer                        : eCopy, Inc.
Document ID                     : uuid:c68879c4-b942-46ce-aeaa-6054b42a76e6
Instance ID                     : uuid:ec6bf624-ed36-4b75-a11e-0bda9a62624e
Page Count                      : 4
Keywords                        : None
Creator                         : eCopy, Inc.

EXIF Metadata provided by EXIF.tools