Chamberlain Liftmaster 3265Cm Users Manual 114A3646

2015-01-25

• OWNER'S MANUAL
• TABLE OF CONTENTS
• INTRODUCTION
  • Safety Symboland Signal Word Review
  • Preparing your garage door
  • Tools needed
  • Planning
  • Carton Inventory
• ASSEMBLY
  • STEP 1 Attach the Rail to the Motor Unit
  • STEP 2 Attach the Chain to the Sprocket and Install the Sprocket Cover
  • STEP 3 Tighten the Chain
• INSTALLATION
  • STEP 1 Determine the Header Bracket Location
  • STEP 2 Install the Header Bracket
  • STEP 3 Attach the Rail to the Header Bracket
  • STEP 4 Position the Opener
  • STEP 5 Hang the Opener
  • STEP 6 Install the Door Control
  • STEP 7 Install the Light
  • STEP 8 Attach the Emergency Release Rope and Handle
  • STEP 9 Electrical Requirements
  • STEP 10 Install The Protector System®
    • IMPORTANT INFORMATION ABOUTTHE SAFETY REVERSING SENSOR
    • INSTALLING THE BRACKETS
    • MOUNTING AND WIRING THE SAFETY REVERSING SENSORS
    • ALIGNING THE SAFETY REVERSING SENSORS
    • TROUBLESHOOTING THE SAFETY REVERSINGSENSORS
  • STEP 11 Fasten the Door Bracket
  • STEP 12 Connect Door Arm to Trolley
• ADJUSTMENT
  • STEP 1 Adjust the UP and DOWN Travel Limits
  • STEP 2 Adjust the Force
  • STEP 3 Test the Safety Reversal System
  • STEP 4 Test The Protector System®
• OPERATION
  • Using Your Garage Door Opener
  • Using the Wall-MountedDoor Control
  • To Open the Door Manually
• CARE OF YOUR OPENER
  • MAINTENANCE SCHEDULE
  • THE REMOTE CONTROL BATTERY
• HAVING A PROBLEM?
  • Diagnostic Chart
• PROGRAMMING
  • To Add or Reprogram a Hand-held Remote Control
  • To Erase All Codes From Motor UnitMemory
  • *3-Button Remotes
  • To Add, Reprogram or Change a Keyless Entry PIN
• REPAIR PARTS
  • Rail Assembly Parts
  • Installation Parts
  • Motor Unit Assembly Parts
• ACCESSORIES
• LIFTMASTER SERVICE ISON CALL
• HOW TO ORDER REPAIR PARTS
• WARRANTY
• FRENCH