Chaney Instrument 276TX Weather Station User Manual 15

Download:
Mirror Download [FCC.gov]
Document ID	2714320
Application ID	qMOEMgwQETFnKyoXhDMKaA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.77kB (222170 bits)
Date Submitted	2015-08-13 00:00:00
Date Available	2015-08-14 00:00:00
Creation Date	2015-08-06 22:28:27
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-08-06 22:30:17
Document Title	15. User Manual.pdf
Document Creator	Adobe InDesign CC 2014 (Macintosh)
Document Author:	User

Instruction Manual
Room Monitor
00276RM
00276TX
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2

   ................. 3
Setup .................................... 4
Placement Guidelines ............. 5
Using the Room Monitor ......... 6
Add-on Wired Sensors ........... 7
Troubleshooting ..................... 8
  ......................... 8
FCC Information .................... 9
Customer Support .................10
Warranty..............................10
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.

  
FRONT
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
               
         
Package Contents
1. Room Monitor
2. Mounting hardware
3. Instruction manual
1. Wireless Signal Indicator
Flashes when data is being
wirelessly transmitted.
2. Low Battery Indicator
3. Current Indoor Humidity
Displayed when no wired sensor
is attached (see page 6).
4. Current Indoor Temperature
Displayed when no wired sensor
is attached (see page 6).
BACK
IMPORTANT
5. Sensor Input
Plug-in for additional sensors
(optional; sold separately).
6. Integrated Keyhole
For easy wall mounting.
!"#$ %#$ & &'*$&&
$" &&*+& /::;$< &+*&
7.
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
Alarm “ON/OFF” Switch
For water detector (optional;
sold separately).
8. Wired Sensor Retention Slot
Simplies cord management
when using add-on wired
sensors (sold separately).
www.AcuRite.com
Register a Product
12
11 8 10
9. Monitor ID
Alphanumeric ID used to
identify the Monitor during
system conguration.
10. “ºC/ºF” Button
Select between degrees
Celsius (°C) or Fahrenheit (°F)
temperature units.
11. Reset Button
Resets display and sensor
transmission.
12. Battery Compartment
14
13
13. Battery Compartment Cover
14. Mounting Hardware
Includes drywall anchor
and screw.
Item
Qty Diameter
Screw 1
#6
Anchor 1
#6
Length
3/4”
3/4”
SETUP
Room Monitor Setup
Placement for Maximum Accuracy
1 Install or Replace Batteries
2      
Batteries MUST be installed for
this product to operate. AcuRite
recommends high quality alkaline
batteries for the best product
performance. Heavy duty or
rechargeable batteries are not
recommended.
After batteries are installed,
a unique 6-digit alphanumeric
*    @
momentarily. It can also be found
printed on the back of the Room
%  $  D * @
be referenced for connectivity
functions.
1. Twist off the battery
compartment cover.
AcuRite products are sensitive to surrounding environmental conditions. Proper
placement of the Room Monitor is critical to the accuracy and performance of
the product.
Room Monitor Placement
The Monitor is designed for indoor use. Place the Monitor in
a dry area free of dirt and dust. Monitor stands upright for
tabletop use or is wall-mountable.
Important Placement Guidelines
• Monitor must be within 330 feet (100 meters) of a companion unit
(optional; sold separately).
*E
2. Insert 2 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
MAXIMIZE WIRELESS RANGE
Place units away from large metallic items, thick walls, metal surfaces, or other
objects that may limit wireless communication.
PREVENT WIRELESS INTERFERENCE
3. Replace the battery cover.
!      L  NOQ V X@     N$+Y
computer, microwave, radio, etc.).
LOCATE AWAY FROM HEAT SOURCES
To ensure accurate temperature measurement, place Monitor out of direct
sunlight and away from any heat sources.
LOCATE AWAY FROM HUMIDITY SOURCES
To ensure accurate humidity measurement, locate Monitor away from humidity
sources. Avoid installing the Monitor near indoor pools, spas, or other bodies
of water. Water sources may impact humidity accuracy.
    
J    *
Install Batteries
2 AA Batteries
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
                  !" #   
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
OPERATION
Using the Room Monitor
The Room Monitor features built-in temperature and humidity sensors, to view
current conditions in the location where the Monitor is placed.
Expand the System
The Room Monitor can be expanded to track additional conditions using
compatible wired sensors (optional; sold separately) that simply plug into the
Monitor. Wired sensors feature an extra-long cord, perfect for installing the
sensors in hard-to-reach places.
Compatible digital displays, wired sensors and companion units are
available at: www.AcuRite.com
Add-on Wired Sensors
Add-On Sensor
Room Monitor Display
with wired sensor
•   [ 
• Roof leaks
• \@  
• Sump pump failure
• Tracking high or low
water level
/    X   X  % Y  % Z   
humidity readings move to the top of the display. The display will automatically
 X  % Z    @ Y X  X
 Z         @ N XV
Water Detector
with audible alert
Model 06010RM
Automatically toggles between
% Z    @
• Indoor pool, spa,
pond or fountain
temperature
• Preventing frozen
pipes
• Seeding, potting and
gardening
Liquid & Soil
Temperature Sensor
/  Z
readings
18 32
Model 06011RM
/  Z
readings
18 32
Indicates sensor is
plugged into the
Monitor
Spot Check
Temperature &
Humidity Sensor
Icon indicates the type of
sensor that is plugged into
the Monitor
Perfect for:
Model 06012RM
• Monitoring conditions
in hard to reach
places (attic,
basement, etc.)
• Pet areas
• &  ]+:
coverage in your home
• Monitoring conditions
 @  Z
room
Troubleshooting
FCC Information
Problem
Inaccurate
temperature or
humidity
Possible Solution
•
•
•
Display screen
not working
Display screen shows
ERROR 1
•
•
•
Display screen shows
ERROR 2
+@  %    X@   @ 
sources or vents (see page 5).
+@  %     X@  
sources (see page 5).
Check that the batteries are installed correctly.
Batteries may need to be replaced.
 @ @    &&$  Y 
on the back of the Monitor.
Check the cord on the wired sensor (sold
separately) and the connection tip for excessive
heat, excessive cold or damage. Wired sensor may
need to be replaced.
     X   N @V
may be out of range. Check the location of the
%    X   +@     
being monitored are within the measurement range
for the wired sensor.
$   X  _`    "  {   X  X   E
_| $  @ ;"$     Y  
2- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
 D      Y       @       @       X  E
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
}       ~  $+    
;"$&E $         @   $+     @        D 
        @    D 
This device complies with Industry Canada’s licence-exempt RSSs.
"  {   X  X   E
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada .
Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interfĂŠrences ; et
( 2 ) Ce dispositif doit accepter toute interfĂŠrence , y compris les interfĂŠrences
qui peuvent causer un mauvais fonctionnement de l'appareil.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
Care & Maintenance
 X  Y          
  
TEMPERATURE RANGE
-4ÂşF to 158ÂşF; -20ÂşC to 70ÂşC
HUMIDITY RANGE
1% to 99% RH
WIRELESS RANGE
330ft / 100m depending on home construction materials
OPERATING FREQUENCY
433.92MHz
POWER
2 x AA alkaline batteries
Customer Support
AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this
         @   X  X@E
(877) 221-1252
info@chaney-inst.com
24/7 support at www.AcuRite.com
*  +
Instruction Manuals
Replacement Parts
Register your Product
Support User Forum
Submit Feedback & Ideas
IMPORTANT
!"#$ %#$ & &'*$&&
$" &&*+& /::;$< &+*&
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
Register a Product
Limited One Year Warranty
At AcuRite, we proudly uphold our commitment
to quality technology. Chaney Instrument Co.
warrants that all products it manufactures to
be of good material and workmanship, and to
be free of defects when properly installed and
operated for a period of one year from the date
of purchase.
and tear, been damaged (including by acts of nature), tampered,
abused, improperly installed, damaged in shipping, or repaired
or altered by others than authorized representatives of Chaney.
The above-described warranty is expressly in lieu of all other
warranties, express or implied, and all other warranties are
hereby expressly disclaimed, including without limitation the
implied warranty of merchantability and the implied warranty
        @ ~@ 
all liability for special, consequential or incidental damages,
whether arising in tort or by contract from any breach of this
warranty. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation
We recommend that you visit us at www.AcuRite. or exclusion may not apply to you. Chaney further disclaims all
com for the fastest way to register your product. liability from personal injury relating to its products to the extent
However, product registration does not eliminate  @ X @     @   @Z Y
the purchaser assumes all liability for the consequences arising
the need to retain your original proof of
     ;  Y    
     X @   
authorized to assume for Chaney any other liability in connection
Chaney Instrument Co. warrants that all products it manufactures X      Y   Y  
corporation is authorized to modify or waive the terms of this
to be of good material and workmanship, and to be free of
paragraph, and the preceding paragraph, unless done in writing
defects when properly installed and operated for a period of
and signed by a duly authorized agent of Chaney. This warranty
one year from the date of purchase. Remedy for breach of this
 @    Y   @ @   
warranty is limited to repair or replacement of the defective
rights which vary from state to state.
item(s). Any product which, under normal use and service, is
    X @     X ";&
  |X @ E Chaney Instrument Co.
<&:     XY  ~  @  @Y
OJ` / Y \ ' Y /* `L_‚ƒ
and at its sole option, be repaired or replaced by Chaney.
Transportation costs and charges for returned goods shall
be paid for by the purchaser. Chaney hereby disclaims all
responsibility for such transportation costs and charges. This
warranty will not be breached, and Chaney will give no credit
for products it manufactures which have received normal wear
10
11
Weather
Stations
Temperature
& Humidity
Weather
Alert Radio
Kitchen
Thermometers
& Timers
Clocks
It’s More than Accurate, it’s
AcuRite offers an extensive assortment of precision instruments,
designed to provide you with information you can depend on to
! @ @ X   ™.
www.AcuRite.com
Printed in China
00276 INST 052215
ŠChaney Instrument Co. All rights reserved. AcuRite is a registered trademark of
the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology.
Visit www.AcuRite.com/patents for details.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : User
Create Date                     : 2015:08:06 22:28:27+08:00
Modify Date                     : 2015:08:06 22:30:17+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2015:08:06 22:30:17+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:1ae7ec36-376e-4e64-ba5d-e77ed81fd7dd
Original Document ID            : xmp.did:2E7F6188252168118A6DE1A4B05A3BCA
Document ID                     : xmp.id:e5d7511e-907c-4386-adbe-f5960c424f7b
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:e757a348-c5be-49a0-b5a7-32f31fa8837b
Derived From Document ID        : xmp.did:ffbdd06b-7425-4a91-a24b-bd6a1f2cfb2a
Derived From Original Document ID: xmp.did:2E7F6188252168118A6DE1A4B05A3BCA
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:05:22 13:52:13-05:00
Format                          : application/pdf
Title                           : 15. User Manual.pdf
Creator                         : User
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Trapped                         : False
Page Count                      : 7

EXIF Metadata provided by EXIF.tools