Changzhou Smoothies Electronics T8SG MULTIPROTOCOL TX User Manual

Changzhou Smoothies Electronics Co., Ltd. MULTIPROTOCOL TX Users Manual

Users Manual

47-Channel Digital Proportional R/C System 2.4GHZ T8SG SYSTEM FEATURES The Jumper series models Multi-Protocol radio features a compact size anda host of protocol options all built in to one product. Various protocols can be quickly and easily selected from the model menu allowing you to bind the radio to just about any major protocol in today’s market. T8SG firmware only activate the CC2500 RF Chip module and also features sound andvibration alerts, back lit LCD display, smooth gimbals and assignable switches .SYSTEM SPECIFICATIONS Use range: Remote control model Brand Name: Jumper Item Number: T8SG MCU: STM32F103RCT6 Storage: 25VF016B (2MB) Display screen: 128*64, 1.7 inch LCD Channels: 47 (up to 12 depending software) Prompt mode: sound and vibration Power supply: 2S Lipo(DC7.4V) Dimension: 188*151*86mm Weight: 338g (not include battery)
FEATURES DESCRIPTIONS Antenna 2dBi omnidirectional antennaPPM Out 3.5mm audio socket Used to connect computer games AUX4 Knob to enter 4 AUX5 Knob to enter 5 SWA 3 Position Switch A input SWB 3 Position Switch B input SWC 3 Position Switch C input SWD 3 Position Switch D input Power LED Red power light RF LED Green light on RF output Power Switch Turn on, shut down Rudder/Throttle Stick Rudder/Throttle Analog input,L/R= Rudder,U/D= Throttle Elevator/Aileron Stick Elevator/Aileron Analog input,L/R= Elevator,U/D= Aileron Throttle Trim Lever Throttle Offset adjustment Rudder Trim Lever Rudder Offset adjustment Elevator Trim Lever Elevator Offset adjustment Aileron Trim Lever Aileron Offset adjustment ENTER KEY Menu confirmation button EXIT KEY Menu exit button UP KEY Menu up button DOWN KEY Menu DOWN button RIGHT KEY Menu RIGHT button LEFT KEY Menu LEFT button
MAIN SCREEN DESCRIPTION SAFETY SYSTEM DEVIATION HAS A SAFETY SYSTEM TO PREVENT STARTING UP IN A DANGEROUSSTATE (FOR INSTANCE SPINNING UP THE MAIN ROTOR OF A HELICOPTERACCIDENTALLY). THE SAFETY SYSTEM WORKS BY VERIFYING THAT SPECIFICCONDITIONS ARE MET BEFORE STARTING TO TRANSMIT TO THE MODEL. BY DEFAULTTHE OUTPUT CHANNEL ASSOCIATED WITH THE THROTTLE STICK MUST BE MINIMUM.THE DEVIATION FIRMWARE DOES NOT INCLUDE A MECHANISM TO DEFINE NEWSAFETY CONDITIONS, HOWEVER, THEY CAN BE ADDED BY DIRECTLY MODIFYING THEMODEL.INI FILE. WHILE THE SAFETY MESSAGE IS DISPLAYED, THE TRANSMITTERWILL NOT COMMUNICATE WITH THE MODEL. THIS MESSAGE MAY APPEAR EITHERWHEN INITIALLY TURNING ON THE TRANSMITTER, OR WHEN SWITCHING TO A
DIFFERENT MODEL. THE MESSAGE WILL DISAPPEAR AUTOMATICALLY ONCE ALLSAFETY CONDITIONS HAVE BEEN MET OR WHEN ‘OK’ IS PRESSED. IN EITHER CASE,DEVIATION WILL START COMMUNICATION WITH THE MODEL ONCE THE DIALOG ISDISMISSED. INPUT MONITOR THE INPUT MONITOR SCREEN SHOWS THE VALUES ASSOCIATED WITH THE CURRENTPOSITION OF THE CONTROL POINTS. THE VALUES SHOWN ARE A PERCENTAGE OFTHE TOTAL RANGE OF THE CONTROLS BASED ON A -100% TO +100% SCALE.
CHANNEL MONITOR THE CHANNEL MONITOR SCREEN ALLOWS THE USER TO SEE THE VALUES OF EACHCHANNEL AS OUTPUT BY THE TRANSMITTER.CHANNELS WITHOUT MIXERS WILL NOTBE DISPLAYED. CHANNEL OUTPUT DISPLAYED IS THE VALUE BASED ON MINIMUM/MAXIMUM VALUES AS WELL AS SCALING. WARNING Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu