Charm Winner Co RF-520GU27F RF GamePad User Manual
Charm Winner Co Ltd RF GamePad
User Manual
Cyber Yoyager Gamepad RF-520U - Introduction Thank you for choosing the USB Cyber Voyager (RF-520U). It is an advanced game control system designed with full ergonomics and equipped with well-positioned buttons to ensure your game play comfort. Moreover it is built with 27 or 433 MHz RF (Radio Frequency) module for the wireless control. This user's guide provides you the necessary information for easy installation and basic operation to this powerful gamepad. To make it fully fits your personal game preference, please refer to the manual and get more information to configure this one. Cyber Voyager (RF-520u) - Federal Communication Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. - System Requirement 1) IBM PC 586/PentiumII compatibles or higher 2) Available USB port or extension USB hub 3) Microsoft Windows 98/ME/2000 recommended - Hardware Overview Please take a moment to consult the diagram below to familiarize with the function of each button on your Cyber Voyager (RF-520u). 1) RF receiver with LED indicator* 2) D-pad and LED (indicator for transmitter)* 3) Quick-response Action Triggers * 4) Functioning Buttons * 5) Channel Selector * (not available for 433MHz) - Installation A. Hardware Installation CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. 1) Plug-in your Cyber Voyager (RF-520U) receiver USB connector to either one USB Port or USB Hub of your computer and make sure it is firmly connected. * You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 2) After the Cyber Voyager is connected, the monitor will shows "Find a new hardware" and the standard USB driver located for you to finish the easy installation and play games immediately. Now you may start to calibrate this gamepad, then customize your gamepad through the game controller to access directly into the game software for play. - Package Contents 1) Rockfire USB Cyber Voyager Transmitter x 1 * 2) Rockfire USB Cyber Voyager Receiver (USB interface) x 1 * 3) User's Guide x 1 * Note for 27MHz user: In playing duo, find the channel selector located at the back of the devices. Make sure that one player (receiver and gamepad) is set at Channel A, while the other player is set at Channel B.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:04:09 14:06:22+08:00 Create Date : 2004:04:01 16:21:54+09:00 Creator : Adobe Illustrator 10.0 Creator Version : 10 Container Version : 9 For : Bill, Charm Title : C:\Documents and Settings\BillTu\®à±\RF-520u(RF) manual-1.pdf Bounding Box : -1 -414 596 846 Page Count : 1 Creation Date : 2004:04:01 16:21:54+09:00 Mod Date : 2004:04:09 14:06:22+08:00 Producer : Adobe PDF library 5.00 Creator Tool : Adobe Illustrator 10.0 Metadata Date : 2004:04:09 14:06:22+08:00EXIF Metadata provided by EXIF.tools