Cheng Uei Precision Industry BM58YB3 GSM 850/1900 Terminal Device User Manual
Cheng Uei Precision Industry Co., Ltd. GSM 850/1900 Terminal Device
UserManual.wiki
>
Cheng Uei Precision Industry
>
BM58YB3 User Manual
>
User Manual
Contents
1.
User Manual
2.
user manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![9 Insert Battery • Slide the battery into the cradle and tap the battery down flat. • Place the back cover and slide it into place. [Warning]: 1. If the battery is totally empty, charging icon or LED is not on. There fore, you should charge the battery maximum up to 10-20 minutes. 2. If you turn off handset abnormally, please take out battery about 10 seconds then insert battery. Otherwise the battery will discharge and run out of power quickly. Charge Battery • Connect the USB cable the power jack on the right side of your phone. • Connect the charger to an AC wall socket. The charging icon is displayed briefly if the phone is switched on. If the battery is completely empty, it may take a few minutes before the charging indicator appears on the display or any calls can be made.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-10.png)
![19 ＊ Users only can see Call records information by press or from idle mode. ＊＊ If the call record is moved to the private, you can not see the detail information in the Call record---Missed calls / Dialed calls / Received calls folder, it will be find in the Organizer---Private Menu---Call record--- Dialed calls / Received calls / Missed calls folder. [Note: The default password is 0000] Within the Call record submenu, we also have many other functions: Delete call lists ♦ In this submenu, Tap "OK" will display SIM 1 or SIM 2 item for you to choose the following list: • Missed calls • Dialed calls • Received calls • Delete All ♦ Tap OK to delete it Call duration This function records the length of time or duration of all incoming and outgoing calls in hours, minutes, and seconds. Tap "OK" will display SIM 1 or SIM 2 item for you to choose the following list: ♦ Last call time: Display last one outgoing call in hours, minutes, and seconds. ♦ Total dialed: Display the time for all outgoing calls in hours, minutes, and seconds. ♦ Total received: Display the time for all incoming calls in hours, minutes, and seconds. ♦ Reset all time: Clear the time records. Call cost This network service allows you to check the cost of your last call or all calls. The call costs are shown separately for each SIM card. ♦ Last call cost: you can set the phone to show the cost of last call. You may need the PIN2 code to select the currency or unit. Contact your service provider for charging unit prices. ♦ Total cost: you can set the phone to show the remaining talk time in terms of charging units or units of currency by using this option. You may need the PIN2 code to select the currency or unit. Contact your service provider for charging unit prices. ♦ Reset cost: this option allows you to reset the call cost counter. You may need the PIN2 code to clear your setting. ♦ Max cost set: you can limit the costs of your calls to a certain amount of charging units or units of currency by using this option. You can make and receive charged calls as long as the specified cost limit is not exceeded. The number of remaining units is shown in the idle mode. You may need the PIN2 code to set the Max cost. ♦ Price per unit: this is the cost that the Service Provider charges for one unit of call time. At this point you will be asked to enter your PIN 2 code to set this function. SMS counter This function can show you how many SMS you already sent and received. Tap "OK" will display SIM 1 or SIM 2 item for you to choose and check contents. GPRS counter With the GPRS counter you can check the amount of data sent and received data in last session in total and to clear the counters. The counters unit is a byte. To reset counter, answer “Yes” when confirm window show up. Tap "OK" will display SIM 1 or SIM 2 item for you to choose and check contents.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-20.png)
![20 Content Café (Menu 2) You can access various mobile Internet services with your phone browser. Please remember always use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language or extensible hypertext markup language on their pages. Appearance may very due to screen size you may not be able to view all details of the Internet pages. For detail information, please see Services. ♦ Gallery: http://app.bug2mobile.com/menu_gallery.aspx ♦ Ringtone: http://app.bug2mobile.com/menu_music.aspx ♦ JAVA Game: http://app.bug2mobile.com/menu_game.aspx ♦ Cartoon: http://app.bug2mobile.com/menu_cartoon.aspx ♦ Horoscope: http://app.bug2mobile.com/menu_horo.aspx ♦ SMS Game: http://app.bug2mobile.com/menu_smsgame.aspx ♦ Lotto: http://app.bug2mobile.com/menu_ilotto.aspx ♦ News-Info: http://app.bug2mobile.com/menu_news.aspx ♦ Entertainment: http://app.bug2mobile.com/menu_movies.aspx ♦ i-Top Up: Application i-Top Up ♦ Sport: http://app.bug2mobile.com/menu_sport.aspx ♦ i-Club: http://app.bug2mobile.com/menu_iclub.aspx App Café (Menu 3) App cafe interface provides users to search and download more new applications. Phonebook (Menu 4) Search You can search contacts by name characters or number. ♦ Name and Number, allow you key in the first characters of the name or number for which you are searching in the editor line, the matched record will be shown. ♦ To search the name, users also can put up to 9 characters in the editor line; the matched record will be shown. ♦ To input or edit a searched item, tap Options to enter into the submenu. You can View, Edit, Delete, Copy, Move, Send SMS, Send MMS, Send contact, Add to blacklist, Move to Private and Mark an entry. ** If the contact is moved to the private, you can not see the detail information in the Phonebook; it will be find in the Organizer--Private menu--Phonebook. [Note: The default password is 0000] Smart Search You can search contacts by first number of number you key, user can put number search in the editor line, the matched record will be shown, then tap Name you send key. Add new ♦ It is possible to store phone numbers in three places: • Add to Phone memory • Add to SIM 1 card • Add to SIM 2 card • Add to private](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-21.png)
![21 ♦ To store a Number in the Phone memory: In main menu, enter to Phonebook menu and select Add new. You can store 500 entries in your phone. • Then select Add to phone memory, tap OK. • Enter the name and number, tap Done. • For each number or text item you can choose: Name / Number / Home number / Company name / Email address / Office number / Fax number / Birthday / Image / Video call / Tone / Caller group [Note]: Tone support MP3, Midi, AMR, and WAV files. [Note]: Image support JPEG, GIF format. The JPEG /GIF images size should be less than 200k. [Note]: Video support motion JPEG files * When users select Ring tone, Image, Video, you can go to File manager page to choose from every folder. When users use these functions, if there is an incoming call, the Video function will only be performed by Image, the ring tone will not work. The Video function can be on or off. When the Video sound is off, the Ring tone can be used. ♦ To store a number in the SIM1 or SIM2 card: In main menu, select Phonebook, and select Add new. You can store 500 entries (Maximum) in your SIM card for name, telephone number and image. • Then select Add to SIM card (SIM1 or SIM2), tap OK. • Enter the name, number, caller group and image, tap OK. [Note]: Image support JPEG, GIF format. The JPEG /GIF images size should be less than 200k. [Note]: The number of store entries in SIM card, it may be different depend on your SIM card service provider. ♦ To store a Number in the Private: In main menu, select Phonebook, and select Add new. You can store 500 entries (Maximum) in your Private for name, telephone number and image. • Then select Add to Private, tap OK. • Enter the name, number, caller group and image, tap OK. [Note]: Image support JPEG, GIF format. The JPEG /GIF images size should be less than 200k. [Note]: The number of store entries in SIM card, it may be different depend on your SIM card service provider. Move You can move names and phones number from the phone’s memory to SIM card’s memory or from SIM card’s memory to Phone’s memory. The copy options have: One by one, All from SIM1 to phone, All from SIM1 to SIM2, All from SIM2 to phone, All from SIM2 to SIM1, All from phone to SIM1, All from phone to SIM2. Move to private You can move the data from the phone or SIM card to private. The copy options have: One by one, All from SIM1, All from SIM2 or All from phone. Delete You can remove name and phone numbers from selected contacts all at once. ♦ In the Phonebook Menu, select Delete then tap OK. ♦ Choose All from phone, All from SIM1, All from SIM2 or One by one tap OK. User needs to enter phone code to confirmed delete then tap OK [Note]: The default phone code is 0000 Copy ♦ You can copy names and phones number from the phone’s memory to SIM card’s memory or from SIM card’s memory to Phone’s memory. The copy options have:](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-22.png)
![24 search the contacts by taping Quick Search (in this page, users can put up to 9 characters to sorting the desired names.) and tap OK to send the message. • If users select Send and save / Save, you can choose Save to normal and Save to private. Save to normal: the sent message is stored in the Messages---SMS---Outbox folder. Save to private: the sent message is stored in the Organizer---Private menu---SMS---Outbox. If the message is stored in Private, users need to enter the password to view the detail information of the message. [Note]: The default password is 0000. MMS Create and send a multimedia message. Use navigation key up/down to select message type then tap OK. If select “MMS”, the MMS editor screen appear. ♦ Use navigation key to select recipients from the contacts directory, or write the phone number or email address of the recipient in the To field if you are sending a MMS or email to the recipient. You also can edit the phone number or email address of the recipient in the CC and BCC fields if you are sending a MMS or email to the recipient. ♦ To edit the subject of the MMS or email, scroll to Subject field. ♦ Scroll to Edit content, tap Edit enter Edit slide text. Tap Options, you can select: Done, Input method, Add image, Add audio, Add video and Add attachment, Add slide before, Add slide after, Delete slide, Next slide, Preview, Slide timing. ♦ To insert a file in the message, scroll to Add attachment option then tap OK. Tap Open to link a specific folder in File manager and scroll to the desired file, then tap OK and Done. An attached file is indicated with the file name in the message. ♦ To send the message, tap Done and send option appear, choose send option: Send only, Send and save, Save to drafts, Send options, Exit and tap OK. • If users select Send and save / Save, you can choose Save to normal and Save to private. If users select Send only, you should enter the Phone number by yourself or search the Contacts by taping Quick Search (in this page, users can put up to 9 characters to sorting the desired names.) and tap OK to send the message. If users select Send and save /Save to drafts, the sent message is stored in the Messages---Drafts folder. Inbox To check an unread message later: ♦ From SMS menu selects Inbox tap OK. ♦ You can select SIM 1 Inbox or SIM 2 Inbox item. ♦ Move to desired message and tap OK to enter list. Tap Options and inbox option list appears, you can select View, Delete, Delete all, Move to private, Detail and Mark. The message is stored in the inbox folder after you have read it. The icon is indicate whether a SMS is read or unread and also show message stored position in front of the message in the list. The icon indicates whether a SMS is illegal message format or broken message, which cannot be displayed in the Message body screen. ♦ While reading the message, tap Options to select through the list of options and tap OK at the highlighted option to select it. ♦ The inbox message option list includes options have Reply, Delete, Edit, Forward, Chat, Advance, Use number, Extract URL and Move to private. Outbox ♦ In Idle mode enter Menu, Messages and Outbox than Tap OK.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-25.png)
![28 Organizer (Menu 7) Private menu You can move the Call records, SMS, Phonebook and File manager to the Private menu; if you do not want others see this detail information. [Note]: To enter the submenu of the Private Menu, users need to enter the password. The default password is 0000. ♦ Call record: • Missed calls: Tap OK to enter the Misseed calls list. Scroll to the desired item; tap OK to see the detail information. The Options of the item have: Delete, Save to Phonebook, Dial, Edit, Send SMS, Send MMS, Add to blacklist, Delete all and Move to normal. • Dialed calls: Tap OK to enter the Dialed calls list. Scroll to the desired item; tap OK to see the detail information. The Options of the item have: Delete, Save, Dial, Edit, Send SMS, Send MMS, Add to blacklist, Delete all and Move to normal. • Received calls: Tap OK to enter the Received calls list. Scroll to the desired item; tap OK to see the detail information. The Options of the item have: Delete, Save, Dial, Edit, Send SMS, Send MMS, Add to blacklist, Delete all and Move to normal. • Delete call list: Tap OK to enter the Delete call list. Within this submenu you can to delete Missed calls, Dialed calls, Received calls and Delete call lists. ♦ SMS: • Write new (SMS): For detail information about how to write text in the phone, see also “Writing Text” on page 18. • Inbox: Tap OK to enter the Inbox list will be shown Inbox options for you choose. Scroll to the desired message, tap Options. The Options of the message have: View, Delete, Delete all and Move to normal. After viewing the message, tap Options. The Options have: Reply, Delete, Dial, Forward, Detail, Advance, Use number, Extract URL, Save objects and Move to normal. • Outbox: Tap OK to enter the Outbox list will be shown Outbox options for you choose. Scroll to the desired message, tap Options. The Options of the message have: View, Delete, Delete all and Move to normal. After viewing the message, tap Options. The Options have: Send, Edit, Delete, Detail, Use number, Extract URL, Save objects and Move to normal. • Drafts: To finish or view a draft message. From Message submenu select Drafts move to desired message and tap Options, the options list appears you can select Detail, View, Delete, and Delete all. While reading the message, tap Options to select through the list of options and tap OK at the highlighted option to select it. The Drafts message option list includes options have Play, Send, Edit, Delete, Delete all, Detail, Save Object and Use number. ♦ Phonebook: • Tap OK to enter the phonebook list. Scroll to the desired item; tap OK to see the](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-29.png)
![30 around the day. If there is any tasks set for the day, the day is changed display icon. To view the appointments, tap OK to Edit and Delete. To do list ♦ In this function, you can View the task, Add task, Edit task, Delete task, and Delete all the list of tasks. You can also select and view a single task. ♦ The task view allows you to view the details of the select task. You can move through the task. ♦ When setting time is coming, the alarm notification is enable, the phone will remain user his activities. Memo ♦ In this function, you can Add the memo, View the memo, Edit memo, Send Note, Delete, and Mark the list of memo. You can also select and view a single memo. ♦ The memo view allows you to view the details of the select memo. You can remember through the memo. ♦ When view this memo, you can tap options to Edit, Send Note or Delete. World clock ♦ The screen shows the city name, current date and time. ♦ You can to choose the city and check the local time. The time zone setting of each city in world time menu may be affected by network condition. Calculator ♦ You can use your phone’s calculator to add, subtract, multiply and divide. ♦ Tap Menu, select Organizer/Calculator, and tap OK. ♦ With the screen showing a “0”, enter the first number in the calculation. ♦ Use Navigation key to select add, subtract, multiply, and divide then tap OK or center key to continue operation. ♦ Tap ＃ to enter a decimal point. ♦ Tap Clear to start the new calculation. Unit converter ♦ To convert measures such as Weight from one unit (Pound) to another (Kg), tap the Menu, and select Organizer then Unit converter. ♦ In the Unit converter submenu, tap Options to select converter options, option in Set weight converter is Reverse converter and Set converter. [Note]: the Converter option display is depending on user settings ♦ In the first amount field, and enter the value you want to convert, the other amount field automatically shows the converted value. For example, in weight converter, pound units extaped in kg units, enter 110 and 49.895164 automatically show in kg field. ♦ Press up/down key to reverse converter, or tap Options to select reverse converter option. ♦ If you want to select other converter types, tap Options and select Set converter to open a list of measures. Choose the measure you want to use and tap OK to enter converter unit list. ♦ Choose the converter unit from which you want to converter and tap Options\Activate. Heath Application program to offer a series of for health consultation, BMI, Menstrual, let you finish body and mind clever health care at the same time. Ebook reader Ebook reader is an application used to read E-books on your mobile phone. E-books are](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-31.png)
![31 nothing but electronic book, which can be read on your phone. These E-books are available in various formats. ♦ Formats supported for E-books: • Palm doc(prc and pbd) file format. • Txt format. • TCR format. • Ztxt format. Torch Torch is equivalent to normal flashlight. When the user opens this feature, the phone will open the flash function to facilitate lighting. You can set torch need to light up the length of time. Multimedia (Menu 8) Camera [Note]: Please obey all local laws governing the taking of picture. Your phone has a digital camera and digital video recorder. You can take pictures, record video clips, view them and send them in MMS. To do this, you must subscribe to these services. Please check with your network operator. The camera lens is on the back of the handset and the display of the handset works as viewfinder. The camera produces pictures in JPEG format and the video clips in motion JPEG format. Please pay attention; if handset is not enough memory to take a new photo, you need to free some by deleting old photos or other files in the File manager. To access this menu, tap Multimedia and select Camera. 1. Tap Back to go back previous level. 2. Tap the Options to choose camera options. 3. Tap the icon or press to snapshoot this screen. 4. Camera’s options menu. ♦ Taking a Photo • The live image appears on the display, and you can use the display as a viewfinder. • To take a photo press to capture. When taking a photo a shutter sound is heard. The phone saves the photo in the Photo album of the Multimedia menu. ♦ To setup camera option Tap Options enter options bar. User can select: • Self timer: Set a time delay before the camera takes a photo, the detail option see below table. 1 3 2 4](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-32.png)
![32 • Image size: Select an image size, for detail see table below. • Image quality: To define how much the photo file will be comtaped when saving the image, the detail option see below table. • Effect settings: Apply a special effect to the photo, the detail option see below table. • Shutter sound: Select the sound that you hear when you take photo. • EV: Select the value of EV to the photo, for detail see table below. • AE meter: This determines the exposure by metering and calculating the light levels in the center and other areas of the image separately. • Banding: Adjust screen backlight flicker, the detail option see below table. • White balance: Adjust the color balance of the photo, the detail option see below table. • Storage: Storage place in phone and memory card. • Restore default: Restore camera setting to default. • Help: Reveal the swift function of each button. • Capture mode: Take a photo in the following mode. Single: Take a photo in the normal mode. [Note]: When user set camera capture mode to “Single” and then all camera options available except “Mode setting” Sticker: Take a series of action stills. You can select the number of photos in the mode setting the camera will take. Burst shot: Take a series of photos. • Save mode: There are Manual Save and Auto Save that you can choose. • Mode setting: The option might change depend on Capture mode, for detail see table below. Camera options Capture mode Single / Sticker / Burst Mode setting 1. If capture mode set to Burst shot, the mode setting have options are: 4 shots / 6 shots 2. If capture mode set to Sticker shot, the mode setting have options are: Frame 1 / Frame 2 / Frame 3 3. If capture mode set to single shot, the mode setting will be disabling. Save Mode Take and save / Automatic save Scene mode Auto / Night Self timer Off / 5 sec / 10 sec / 15 sec Image size 160*120 / 240*320 / 320*240 / 640*480 Image quality Low / Normal / High Effect settings Normal / Gray scale / Sepia / Sepia green / Sepia blue / Color invert Shutter sound Off / Sound 1 / Sound 2 / Sound 3 EV EV+1 ~ EV+4 / EV0 / EV-1 ~ EV-4 AE meter Auto / Spot / Weight / Average Banding 50 Hz / 60 Hz White Balance Auto / Daylight / Tungsten / Fluorescent / Cloudy / Incandescence Restore default Restore camera setting to default Help Reveal the swift function of each button Torch light On/Off Photo album Photo album is a folder under Multimedia; it is a folder to save the photo images. You can view image in this folder. Tap Options and choice one of the following functions that may be available for the selected files: ♦ View: To view the photo.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-33.png)
![36 To record FM radio, tap to begin FM recorder. ♦ Using the radio When the radio is on, tap “Option” selection FM Radio function. Stations: To save the channel you have found, tap and select Edit. Key in the name of the channel and Frequency tap OK. You can save 10 radio channels in the handset. Set frequency: If you know the frequency of the radio channel you would like to listen to (between 87.5 MHz and 108.0 MHz), key it in and tap OK. Auto search: If you want to search radio channel, tap Yes when Preset list confirm message show up. The search stops when channels has been found and show channel in Stations. Settings: FM radio setting options: Background play: Turn On/Off Background plays function. • On: allow radio continuing playing when exit FM radio. • Off: when user exits FM radio, radio will stop. Record format: Select the record format, AMR/WAV. Loud speaker: To turn On / Off the speaker. Record Storage: Storage place in phone and memory card. Record: Beginning record FM radio. Append: To append new radio with the already existing file. File list: Show amount of record files. [Note]: Before use FM radio option, please turn on the radio first. [Note]: You can normally make a call or answer an incoming call while listening to the radio. The volume of the radio is muted. When you end the call, the radio volume will automatically be turned up again. Also, when an application using GPRS or HSCSD connection is sending or receiving data, it may interfere with the radio. FM radio recorder scheduler ♦ Tap Menu, select Multimedia/FM radio recorder scheduler, tap OK to enter submenu of FM radio recorder scheduler. ♦ To set the recorder scheduler, tap Edit and set on the radio, key in the date, and time to start and stop. ♦ You can repeat the recorder to Everyday, Once, or Days. ♦ The record settings can edit Record format (AMR / WAV), Audio Quality (High / Low) or Storage (phone and Card). Photo editor You can use “Photo artist” feature to edit, cut or Re-size the image file. You can also use the "Image tiles" feature to merge multiple images into a single image file. Melody composer The melody composer application is designed to melody files using the iMelody format prescribed. It allows user to enter key sequence to compile a melody that can be played and set as a ring tone as well. A melody file comprises of seven note types each played for a specified duration of time and can have different pitch and octave. These files are stored using prescribed format as identifiers corresponding to tap sequence entered by the user. The application displays the tap sequence in a graphical format to allow compilation in a user friendly manner.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-37.png)
![38 function to on, the phone sounds a warning tone when the battery is running out of power. ♦ Rename Yon can change the name of selected profiles. More detail information about writing text sees also “Writing Text”. Display settings ♦ Wallpaper You can set your phone to display a background picture, wallpaper, when the phone is in idle mode. You can also download wallpaper from WAP and MMS and then save them in My folder under File manager. Your phone supports JPEG, GIF formats. [NOTE]: The wallpaper and screen saver should be less than 1280x1024(for JPG) and 320x240(for GIF). In addition, the file size can’t be over 300kb. [NOTE]: If image size is over size, the image displays speed might get slow and please wait for more time to show up. To select a wallpaper picture. • Tap Menu, and select Settings, Display Settings and Wallpaper. • Select Default and image list will be shown. Use navigation key Left ◄ and Right ►direction to select the image and tap OK to choose the desired picture then tap OK • To set own picture for wallpaper. To select the My folder and tap the OK. Users can select wallpaper from Images, Photos and Card folders. Scroll to desired folder and tap Open. Use and to select the image or photo and tap OK. ♦ Screen saver The screen saver is activated when the phone is in idle mode and none of the phone’s function been used for a certain time. Press any key to deactivate the screen saver. Turn Settings on to activate the screen saver. With Select, you can choose an image or animation as screen saver from the Default list. Select in timeout after which time the screen saver will be activated. To set own picture for Screen Saver, with Select, choose From Gallery. Users can select screen saver from Images, Photos, Video, Phone and Card folders. Scroll to desired folder and tap Open. Use and direction to select the image and tap OK to select. ♦ Themes You can change the appearance of the display, for example, the colors and background picture, by use Themes. Your phone comes with some pre-set color schemes. You cannot delete these color schemes and choose one of them from the list. There are three themes canned been choosing. For activate each one themes, tap Options to Activate. ♦ Standby mode settings Date and time You can turn this function on or off to show or hide Date and Time. Network name You can turn the function on or off to display or hide your service provider name in idle screen. ♦ Light LCD backlight You can set the LCD backlight level (10 level) and waiting time (5 ~ 45 sec). Keypad backlight You can turn this function on or off ♦ Font setting Font size](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-39.png)
![39 This function allows you to change the size of the font displayed in SMS, Phonebook, Time or Date. The options are: Small font / Normal font / Large font [Note: Font size setting only for SMS and Phonebook.] Font color This function allows you to change the color of the font displayed in Menu, SMS, Phonebook, Time and Dtae. The options are: Theme color/ Red/ Cyan/ Teal/ Yellow/ Green/ Navy/ Blue/ Purple/ Black/ Silver/ Gray/ White/ Maroon/ Fuchsia/ Lime/ Olive Dial number color This function allows you to change the color of the font displayed in Dial number. The options are: Theme color/ Red/ Cyan/ Teal/ Yellow/ Green/ Navy/ Blue/ Purple/ Black/ Silver/ Gray/ White/ Maroon/ Fuchsia/ Lime/ Olive Date and time ♦ Set the time This function allows you to set the time. The format is <HH:MM>. ♦ Time format This function allows you select the format of the time display, 12 or 24. Use navigation key to change it and tap OK. [Note]: The time and date format display is depending on user settings. ♦ Set the date This function allows you to set the date. ♦ Date format This function allows you select format of the date display, use navigation key to change it tap OK. ♦ Auto-update of date / time Within Settings menu, select Auto-update of date / time (network service) to set the phone to automatically update the time and date according to the current time zone, select On. Automatic update of date and time does not change the time you have set for the alarm clock, calendar or the alarm notes. They are in local time. Updating may cause some alarms you have set to expire. Phone settings ♦ Language This allows you to switch between different languages and to select a language for the display texts. ♦ Welcome note You can turn the function on or off to display or not display the “Welcome note”, when you switch on the phone. You can edit text from the Note item. ♦ Preferred input method Choose preferred input method of the editor. ♦ Shortcuts The Shortcuts screen displays 10 favorites items set by the user. You can edit some specific functions to the default list for your personal favorites list and activate them. Within Favorites menu, tick the box from the function list. The phone offers you an extensive range of functions, which are grouped in menus and submenus. From idle mode, tap shortcut key can access the shortcuts menus. Call settings ♦ Select SIM You can select SIM 1 or SIM 2 card for the present setting. ♦ Caller ID In the call setup menu, the Caller ID allows you to check the status of whether a caller’s identification is sent](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-40.png)
![41 ♦ Call time reminder Turn function On/Off to remind duration of a call. When this option is set to On, there will be a short beep when duration of a call exceeds the reminder time. ♦ Call time display Turn the function On/Off to show the calling time. ♦ Auto redial Select On and your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt. Connection setting ♦ Bluetooth You can utilize wireless technology of Bluetooth to connect other inclusive devices. The inclusive device may include the mobile phone, the computer and earphone, etc. You can utilize Bluetooth technology transfer image, the film, music and sound file. [NOTE]: After opening the Bluetooth function, will increase the power consumption of the battery. Power Turn on or off the Bluetooth function. After turn on the Bluetooth function, will reveal in top screen Inquiry audio device Search the new Bluetooth device in the range and pair it. Before pairing, please set up the password, and reach an agreement to use the same password with another device user. My device Pair the old Bluetooth device. Active device To Active the Bluetooth device that has. Settings • Visibility: Whether setting up your mobile phone should let the other Bluetooth device be found. • Change device name: Change your mobile telephone name (the display among other Bluetooth apparatuses). • Authentication: Turn on / off the Authentication function. • Audio path: Whether choose from mobile phone answering a call directly or forward to BT headset. • Storage location: Select storage place in phone or memory card. • FTP settings: File transfer protocol setting. About Your Bluetooth mobile phone device explains. ♦ Network settings The function allows you to set SIM1 or SIM2 network related settings. Network selection • The phone automatically selects one of the cellular networks available in you area, when auto mode is selected. • In manual mode the phone will show a list of available networks that you can choose from. Only networks that have a roaming agreement with your home network operator are allowed to be selected. Prefer networks The network list is used when the mode is set to automatic. The order of the prefer network list indicates the search priority. Tap Options key to edit prefer networks: “Add from list”, “Create new”, “Change priority” and “Delete”. Band selection The wireless phone described in this guide is approved for use on 850MHz, 1900MHz, 850/1900MHz and Auto networks. You can choose the band from the list.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-42.png)
![42 Security settings The function allows you to set SIM1 or SIM2 security settings. ♦ Pin lock This function allows you to lock the phone with a specific SIM card. The feature is designed to prevent the use of your phone by means of another person’s SIM cards if your phone becomes lost. You can switch on or off to activate the PIN lock function. If you switch PIN Lock on, every time you turn phone on, you need to enter the PIN number to set the request on. ♦ Fixed dialing You can switch mode on and off. This function dials only the numbers in the fixed dialing number (FDN). To save and edit numbers on the list, you need the PIN2 code. ♦ Barred dialing You can switch mode on and off. ♦ Change PIN code Change PIN cod This allows you to change the PIN number. Change PIN2 code This allows you to change the PIN2 number. ♦ Phone lock You can switch When switch on / Off the Phone lock function to protect your phone. If you select When switch on, you need enter the password to set the request on. [Note]: the default password is 0000. ♦ Auto keypad lock This allows you to lock the phone’s keypad and touch panel to prevent accidental key press. In submenu, select the time that after the last key press/tap will be disabled, then tap OK. Mobile Tracker You can switch mode to Activate or Deactivate. After mobile tracker function active, the mobile will remember the IMSI of the SIM. If mobile phone lost and insert the new SIM, then it will send new SIM card's IMSI automatically for the number set up. [Note]: The default password is 0000. ♦ Change security code This allows you to change the password. Restore factory ♦ Within this menu you can reset the menu settings to their original values. The security code is needed for this function. [Note]: The default password is 0000. ♦ After you select restore factory, setting values are returned default value. Those value including Profile, Ring tone, Call log, Caller group, Time format, Wallpaper, Screen saver, Themes, WAP setting etc. Music player (Menu 10) Your phone includes a Music player for listening to music tracks. MP3 files stored in the Audio folder (Default setting) will automatically be detected and added to the default play list. You can listen to the sound files via a compatible headset, or the phone’s loudspeaker. You can make or answer a call while using the music player. During a call, the playback is paused. [Note]: Because of the small dimension of the speaker, in some cases the audio could be distorted, especially at maximum volume and when there are lots of bass sounds.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-43.png)
![43 Therefore, we recommend you to use the stereo headset in order to appreciate the high quality of your music. The Music Player supports: AAC, AAC+, MP3, AMR, WAV, MIDI, iMelody formats. ♦ Playing the audio User can listen to music on the loudspeaker or with headphone. MP3 headphones jack: Only for playing MP3 file. It provides the other user can also listen to the music or sound from MP3 file by his headphones. Use the functions of the four ways Navigation key as describe in the bellow table: X Play / Pause music Increase the volume. Reduce the volume. Short tap to skip previous tracks. Long tap to jump previous segment. Short tap to skip next tracks. Long tap to jump next segment. ♦ In the Music player menu, taping List allows access to the following settings. List You can view all the tracks available on the track list and play the desired track. If you tap Options in the Play list, you can: • Play: To play selected music. • Add: To add music, which not store in the MP3 folder. • Delete: To delete the selecting music. • Rename: To modify the name of the selecting music. • Add to ring tone: To add selected music for ring tone. • Detail: To show music information. • Delete all: To delete all the music in the play list. Settings Music player’s setting options • Storage: Storage place in phone and memory card. • List auto generate: Turn On/Off for List auto generate. When List auto generate function turns on, user can refresh the track list (for example after adding new tracks to the list) and change the track list that is shown. When List auto generate functions turns off, user can add tracks from the different folder in File manager. • Skin: To change the skin. The function include: Skin 1 ~ Skin 3. • Repeat: To play the current track or the enter track list repeatedly. • Shuffle: Turn On/Off Shuffle function. • Background play: Turn On/Off Background plays function. On: Allow music continuing playing when left music player. Off: When user left music player, music will stop. • Equalizer: To change the equalizer. The function include: Normal, Bass, Dance, Classical, and Treble, Party, Pop, and Rock. [Note]: All music tracks must be storage in My Music (Default setting, user may not be change path.) Add / Delete Music to play list • Please turn off the handset before Add/Delete music. • Plug in cable (USB) to handset and PC, screen show three options: Mass storage mode: For add / remove music or image. In the Mass Storage mode, user can add / remove music to handset via PC. COM port: as USB charger.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-44.png)
![44 [Note]: When you plug in USB cable, can select Mass storage, the handset will remain power on status. The handset will automatically connect to memory card only. If you want connect to the phone, please power off the handset. TV (Memu 11) Watch full screen analog TV on this device and be the first to get the news! Please plug in the antenna before watching TV in this device. You can adjust the antenna lines for better signals. When launching TV for the first time, the device will require you to set the country and automatically start searching for available channels and will set the first channel detected as default channel. ♦ Use the functions as describe in the bellow table: Rotate screen To skip previous channel To skip next channel Volume control Capture the photo Edit SMS and send ♦ TV Volume Control Method: You may use volume control key on the side to adjust volume. When watching TV, the volume adjustment bar will appear on the bottom of the screen after you press volume control key. ♦ When the TV is on, tap Options and then select. Set Country: Choose the country of the position of mobile phone. Auto search: When select “Auto search”, the device will automatically start searching for available channels and will set the first channel detected as default channel. Change channel: • Channel list: To save the channel you have found, tap and select Edit channel. Key in the channel number and tap OK. You can save 35 channels in the handset. • Favorite list: To input the favorite channel. You can save the 35 channels in the handset. Brightness: You can choose 4 kinds of level (Level 1 ~ Level 4). Reminder: You can set reminder to open the TV. Auto off: Select the auto off time, the option include None, 15 min, 30 min and 60 min. Capture mode: You can set the capture mode to Single shot or Nine shot. Add to favorite: Add the channel you are currently watching to favorite list. Restore setting: After you select restore factory, TV setting values are returned default value. Exit: To exit TV function. Send SMS: You can send message under the TV function, press send key quick into SMS function also can tap option selection SMS.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-45.png)
![47 between the phone and the gateway server is encrypted. However, the security indicator does not indicate that the data transmission between the gateway and the content server (the location where the requested resource is stored) is secure. It is up to the service provider to secure the data transmission between the gateway and the content server. Data account Connect way while choosing the mobile phone to browse through the WAP. Detailed materials setting up value, please arrange with a network supplier. To Use Mass storage (USB cable) [NOTE]: System default requirement: PC hardware and software for Windows 2000/XP and above. For more information, please see below “Install USB Software for Window 2000” [NOTE]: Please use USB according to the standard steps as below; otherwise the data may lose or cause damage. If you want to add/remove music and images to the Handset, connect it to a PC with USB cable. ♦ Plug in cable (USB) to handset and PC, screen show three options: Mass storage mode: for add / remove music or image files. Webcam: for connecting with PC as webcam. COM port: as USB charger. ♦ Connecting the handset to PC After connected the handset and PC, choice “Mass Storage” handsets will automatic turn off. The OS will automatically generate two “Removable Disk” in My Computer, one for handset, one for memory card. You can enter the disk to access the data in the handset. You can access to the handset from the Window Explorer (Windows 2000/XP) / File Manager or My Computer and add / erase audio, image or other files to the handset. If you want to remove the USB cable from the handset after adding or erasing files. • Double click the Remove Hardware icon in the taskbar tray. • Select “USB Mass Storage”, then clicks Stop when the message “You can remove hardware now” appears on the screen, and removes the handset.](https://usermanual.wiki/Cheng-Uei-Precision-Industry/BM58YB3.User-Manual/User-Guide-1379713-Page-48.png)
