Cheng Uei Precision Industry H3 Bluetooth Headset User Manual Part I

Cheng Uei Precision Industry Co., Ltd. Bluetooth Headset Part I

Contents

User Manual Part I

1 - CHARGE YOUR HEADSET2 - PUT HEADSET IN PAIR MODE3 - PAIR PHONE WITH HEADSET4 - TEST AND USE Get Connected in4 Quick StepsH3Bluetooth®Handsfree HeadsetBEFORE YOU BEGIN1Charge your headset's battery for 2 hours:Plug the Motorola charger into the end of the headset.The blue indicator light turns on when the battery is charging. It may take up to 1 minute for the light to turn on. When the headset's battery is fully charged (about 2 hours), the blue indicator light turns off.Unplug the charger from the headset.12Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.CHARGE YOUR HEADSETEarhookYour phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:TEST AND USEPlace the headset over your ear. See "Wearing the Headset" on the reverse side of this guide.On your phone, dial the number you want to call and press the Send key.If your phone and headset are successfully paired, you will hear ringing on the headset.412USING YOUR H3TROUBLESHOOTINGMy phone does not find my headset.Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 2).My headset worked before but now it'snot working.Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 3). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 3). If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again (see step 3).Support.If you need more help, contact us at1-877-MOTOBLU or visit us atwww.hellomoto.com/bluetooth and click Support.MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005.Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 6809498A97-O3Take a moment before you get started to familiarize yourself with your newH3 Handsfree Headset.Volume ButtonsBlueIndicator LightCall ButtonMicrophoneSee Features and Functions Guideon the reverse side of this guidefor information onusing your H3.After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.When your headset and phone are successfully paired, the blue light on your headset will change from steadily lit to flashing.Note: This procedure is for most Motorola phones. For other phones, see your phone's user's guide or visit www.hellomoto.com/bluetoothsupport and click Set Up My New Product.PUT YOUR HEADSET IN PAIRING MODE2Call ButtonWith the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remainssteadily lit.Before you can use your headset, you must pair (link) it with your phone.Blue Indicator LightNote: The blue light will flash as you press and hold the Call button. Continue holding down the Call button until the blue light is steadily lit.Note: If you let go of the Call button before the blue light is on and steady, ensure that your headset is off before trying again.Note: To turn off headset, see "Turning Headset On/Off" on the reverse side of this guide.Note: Headset is not functional while charging.TURN ON BLUETOOTH ON YOUR PHONE AND PAIR WITH HEADSET3Select (Menu) > Settings > Connection > Bluetooth Link > Setup.Scroll to Power.Press Change.Select On.Select Back.Select Handsfree.1234M(Your phone's Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone.To turn on Bluetooth:Start Here > > >Select [Look for Devices].Note: Do not select STOP--you will automatically be taken to the next screen.Select Motorola H3.Select Yes to bond.Enter the passkey 0000 and select OK.TURN ON BLUETOOTH ON YOUR PHONE AND PAIR WITH HEADSETContinued5678910DRAFTDRAFT

Navigation menu