Cheng Uei Precision Industry H3 Bluetooth Headset User Manual Part I

Download:
Mirror Download [FCC.gov]
Document ID	608328
Application ID	ix6xXVd6qlRj6sLz3sSAhg==
Document Description	User Manual Part I
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	231.9kB (2898713 bits)
Date Submitted	2005-12-05 00:00:00
Date Available	2005-12-05 00:00:00
Creation Date	2005-12-05 18:04:52
Producing Software	Adobe PDF library 5.00
Document Lastmod	2005-12-05 18:05:17
Document Title	User Manual Part I
Document Creator	Adobe Illustrator 10.0

BEFORE YOU
BEGIN
CHARGE YOUR
HEADSET
PUT YOUR HEADSET
IN PAIRING MODE
TROUBLESHOOTING
My phone does not find my headset.
Make sure the blue light on your headset is
steadily lit when your phone is searching for
devices (see step 2).
Start Here > > >
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
H3
BluetoothÂŽ
Handsfree Headset
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
Earhook
Call
Button
Volume
Buttons
Microphone
Blue
Indicator
Light
TURN ON BLUETOOTH
ON YOUR PHONE AND
PAIR WITH HEADSET
Your phone's Bluetooth feature is off by
default. To use your headset, turn on the
Bluetooth feature in your phone.
Guide Number: 6809498A97-O
(Menu ) > Settings > Connection >
1 Select M(
To turn on Bluetooth:
Bluetooth Link > Setup.
Š Motorola, Inc. 2005.
Blue Indicator Light
1 Plug the Motorola charger into the end of
the headset.
The blue indicator light turns on when the
battery is charging. It may take up to 1
minute for the light to turn on. When the
headset's battery is fully charged (about 2
hours), the blue indicator light turns off.
2 Unplug the charger from the headset.
Note: Headset is not functional while charging.
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and
their accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
Call Button
Take a moment before you get started to
familiarize yourself with your new
H3 Handsfree Headset.
Get Connected in
4 Quick Steps
1 - CHARGE YOUR
HEADSET
2 - PUT HEADSET
IN PAIR MODE
3 - PAIR PHONE
WITH HEADSET
4 - TEST AND USE
Charge your headset's battery for 2 hours:
Before you can use your headset, you must
pair (link) it with your phone.
TURN ON BLUETOOTH
ON YOUR PHONE AND
PAIR WITH HEADSET
Continued
7 Select [Look for Devices].
Note: Do not select STOP--you will automatically be
taken to the next screen.
8 Select Motorola H3.
2 Scroll to Power.
9 Select Yes to bond.
3 Press Change.
10 Enter the passkey 0000 and select OK.
4 Select On.
When your headset and phone are successfully
paired, the blue light on your headset will
change from steadily lit to flashing.
5 Select Back.
6 Select Handsfree.
Note: This procedure is for most Motorola phones. For other
phones, see your phone's user's guide or visit
www.hellomoto.com/bluetoothsupport and click Set Up My
New Product.
With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit.
Note: The blue light will flash as you press and hold the Call
button. Continue holding down the Call button until the blue
light is steadily lit.
Note: If you let go of the Call button before the blue light is
on and steady, ensure that your headset is off before trying
again.
Note: To turn off headset, see "Turning Headset On/Off" on
the reverse side of this guide.
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:
1 Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
2 On your phone, dial the number you want
to call and press the Send key.
3 If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.
My headset worked before but now it's
not working.
Make sure your phone is on and the
Bluetooth feature is turned on in your phone
(see step 3). If the Bluetooth feature has
been turned off or was turned on only
temporarily, you may need to restart the
Bluetooth feature (see step 3). If you have
confirmed the Bluetooth feature is on in your
phone, pair your phone and headset again
(see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support.
USING YOUR H3
See Features and Functions Guide
on the reverse side
of this guide
for information on
using your H3.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1
Creator Version                 : 10
Container Version               : 9
Creator                         : Adobe Illustrator(R) 10.0
For                             : Rick Lazier, Harbor Light Communications, Inc.
Title                           : C:\Harbor Light Communications\Projects\MOT\Work Files\H3\9498a97o\Latest\Production\9498a97o\graphics\9498a97o_Front.eps
Create Date                     : 11/7/2005 4:54 PM
Bounding Box                    : -79 -649 1103 54
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:0a8a3371-bb0e-433f-b9a2-6f71315384c4
Modify Date                     : 2005:12:05 18:05:17+08:00
Metadata Date                   : 2005:12:05 18:05:17+08:00
Document ID                     : uuid:76809570-7e00-4c26-b306-9756169c36b1
Format                          : application/pdf
Producer                        : Adobe PDF library 5.00

EXIF Metadata provided by EXIF.tools