Cheng Uei Precision Industry HS5CN Bluetooth Headset User Manual
Cheng Uei Precision Industry Co., Ltd. Bluetooth Headset
Users Manual
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2006.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809504A24-O
motorola
Bluetooth®
Handsfree Headset
Get connected in 4 quick steps.
H550
Volume
Buttons
Call Button/
Slide Switch Multi-Color
Indicator Light
Microphone
Speaker
(on reverse
side)
Charging
Port
TROUBLESHOOTING
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H550 Headset.
BEFORE YOU BEGIN
1
CHARGE
Your Headset's Battery
Plug the Motorola charger into the end of
the headset.
The indicator light turns red when the
battery is charging. It may take up to 1
minute for the indicator light to turn on.
When the headset's battery is fully charged
(about 2 hours), the indicator light turns off.
Disconnect the charger.
1
2
Note: Headset is not functional while charging.
2
START BLUETOOTH
FEATURE
Your Phone
Press (
Menu) > Settings > Connection >
Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
1
2
3
4
5
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
3
PAIR
Your Headset
Before you can use your headset, you must pair
(link) it with your phone.
Step A - PUT THE HEADSET IN PAIRING
MODE
The headset indicator light will be steadily lit in
blue when in pairing mode. To place the
headset in pairing mode, simply slide the
switch toward the microphone (ON position).
After a few moments, the indicator light
becomes steadily lit in blue.
Note: If the headset has previously been paired with other
devices, you need to turn those devices off before sliding the
switch to the ON position. If you already slid the switch to the
ON position, toggle the switch OFF and ON (after ensuring
devices are turned off) to enter pairing mode.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
3
PAIR CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
3
4
5
1
2
For most Motorola phones:
On your Motorola phone, press (Menu) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H550.
Select OK or Ye s to pair your headset with
your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs with
your phone, the indicator light changes from
steadily lit to flashing blue.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
Place the headset over your ear.
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, turn OFF the
headset when you don't use it for an
extended time by sliding the switch
towards the charging plug.
1
2
3
USING YOUR H550
See
Features and
Functions Guide
on the reverse side
for information on
using your H550
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is flashing in blue, turn off the other device
and wait for 10 seconds. The indicator light
becomes steadily lit in blue indicating the
headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
FT
T
DRAF
BLESH
help.
2
nu
)
>
Connection > Bluetooth Li
Handsfree > Look for Devices.
Th
e phone lists Bluetooth devices it f
Select
M
Select
OK
r your heads
y
our phone
Enter the passkey:
0000
Select
OK
and
ake and re
To make a call:
Place the headset over y
the phone, dial the number you want to
call and press
SEND
key on your phone.
If your phone and headset are successfu
paired, you will hear ringing o
A
fte
1
2
3
UR H550
and
uide
on the reverse side
for information on
using your H550
AA
My headset will not enter p
Make sure that any devices p
re turned o
ue tur
D
DRAFT
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
onnected in 4 quick steps.onnected in 4 quick steps.
R
R
DR
DR
R
R
R
R
R
R
phone
R
R
Port
the Motorola charger int
headset.
e indicator light turns red when the
attery is charging. It may take up to 1
minute for the indicator light to turn on.
When th
(about 2
T
hone
Press (
Menu
nection >
Blueto
1
2
3
s Bluetooth feature is off by de
To use your headset, you must turn on the
Bluetooth feature
Motorola phones (at the main menu
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H550.
Features and
Functions Guide
H550
Bluetooth®
Handsfree Headset
TURNING HEADSET
ON AND OFF
To turn your headset on, slide the switch
toward the microphone. The indicator light
flashes blue (if paired with another device),
or is steadily blue (if ready to be paired).
To turn your headset off, slide the switch
toward the charging plug. The indicator light
will turn off.
EARHOOKS AND YOUR
HEADSET
Your H550 headset is supplied with three earhooks.
The earhook is attached onto a hinge pin, and is
placed onto your ear when using your headset. To
install an earhook on your headset:
040059o
2 Pull Earhook Up
Hinge Pin
1 Open Earhook
CHANGING VOLUME
BUTTON ORIENTATION
You can also change the orientation of the
volume buttons on your headset.
Turn the headset power off.
Press the Volume button you want to
assign as the "volume up" button and
slide the switch toward the microphone.
The indicator light is either steadily lit or
flashing in blue.
1
2
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
European Union Directives
Conformance Statement
0168
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Hereby, Motorola declares that this
product is in compliance with:
MAKING CALLS
Note: Your H550 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Function Action
Make a voice dial call Tap the Call button
and speak the
name after the tone
End a call Tap the Call button
Receive a call Tap the Call button
Reject a call Tap a Volume button
Redial last call Press and hold the
Call button until you
hear a beep
Answer a second Tap the Call button
incoming call
Reject a second Tap a Volume button
incoming call
MAKING CALLS CONTINUED
Function Action
End an active call and Tap a Volume button
resume a call on hold
Mute or unmute a call Tap both Volume
buttons
Disable the First slide the switch
indicator light toward charging plug
(to turn headset off),
then press and hold
both Volume
buttons AND slide
the switch towards
the microphone (to
turn headset on)
Note: Some features are phone/network dependent.
INDICATOR LIGHTS
With the Charger Plugged In
Headset Indicator Headset Status
Steady blue Charging
Off Charging complete
With No Charger Plugged In
Headset Indicator Headset Status
Off Power off
Steady blue Pairing mode
10 rapid blue/purple Pairing successful
flashes
Slow blue pulse Connected
(on a call)
Slow blue flash Standby
(not on call)
Blue flash Idle (not connected)
Quick blue flash Incoming/outgoing call
Slow purple pulse Connected
(on a muted call)
Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
AUDIO TONES
Audio Tone Headset Status
Single high tone when Volume at minimum
pressing volume button or maximum
Two tones Low battery
repeated every 30 sec.
No audio indications; Out of range
deteriorating quality
Ring tone Incoming call
Single high tone Pairing confirmation
Low to high tone Voice activation
Single high tone End call
Low to high tone Phone network
not available
Two ascending tones Mute enabled
Two descending tones Mute disabled
Slide Switch
Indicator Light
Slide
Switch
Volume
Buttons
Open the attached
earhook 90 degrees from
the headset.
Gently lift and pull the
top of the earhook up
and off the upper hinge
pin. Then, pull it away to
remove it.
Position the headset for
right or left ear use (right
ear use is displayed).
Hook the bottom of the
earhook onto the lower
hinge pin, then lift and pull
the top of the earhook
over the upper hinge pin.
1
2
3
4
WEARING THE
HEADSET
Once you have attached your desired
earhook, follow these steps to wear your
headset on your ear:
1
2
3
Open the attached
earhook 45 degrees from
the headset.
Loop the earhook over
your ear.
Press earhook to your ear.
When worn, your headset
will look like this on your
head:
1
2
3
FCC Caution
1. The device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2. This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
3. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the
equipment.
FCC statement in User's Manual (for class B)
"Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.