Cheng Uei Precision Industry HS5CN Bluetooth Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	694570
Application ID	3g9rbNV1cISHBwEw6HSjyw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.65kB (595575 bits)
Date Submitted	2006-08-16 00:00:00
Date Available	2006-08-16 00:00:00
Creation Date	2006-08-11 14:13:39
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-08-11 14:17:45
Document Title	untitled

motorola
Bluetooth
Handsfree Headset
BEFORE YOU BEGIN
®
CHARGE
Your Headset's Battery
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
PAIR
Your Headset
Your phone'ss Bluetooth feature is off by de
default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
Before you can use your headset, you must pair
(link) it with your phone.
Call Button/
Slide Switch
Multi-Color
Indicator Light
Volume
Buttons
Microphone
phone
Speaker
(on reverse
side)
Get connected
onnected in 4 quick steps.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809504A24-O
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2006.
START BLUETOOTH
FEATURE
Your Phone
hone
Take a moment before you get started to
familiarize yourself with your new
H550 Headset.
H550
PAIR CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
nu ) >
1 On your Motorola phone, press  (Menu
For most Motorola phones (at the main menu):
menu
nection >
1 Press  (Menu ) > Settings > Connection
Charging
Port
int the end of
1 Plug the Motorola charger into
the headset.
2 Scroll to Power.
The
e indicator light turns red when the
battery
attery is charging. It may take up to 1
minute for the indicator light to turn on.
When the
th headset's battery is fully charged
(about 2 hours), the indicator light turns off.
3 Select Change.
2 Disconnect the charger.
Note: Headset is not functional while charging.
TEST AND USE
Your phone and headset are now paired and
ready to make
receive calls.
ake and re
To make a call:
1 Place the headset over yyour ear.
Settings > Connection > Bluetooth Link
Li >
Handsfree > Look for Devices.
2 On the phone, dial the number you want to
The phone lists Bluetooth devices it ffinds.
successfully
3 If your phone and headset are successfu
Motorola H550.
2 Select M
headset with
3 Select OK or Yes to pairr your heads
phone.
your phone
4 Enter the passkey: 0000
OK.
5 Select OK
When your headset successfully pairs with
your phone, the indicator light changes from
steadily lit to flashing blue.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
Blueto Link > Setup.
Bluetooth
call and press SEND key on your phone.
on the headset.
paired, you will hear ringing o
4 Scroll to On.
5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Step A - PUT THE HEADSET IN PAIRING
MODE
The headset indicator light will be steadily lit in
blue when in pairing mode. To place the
headset in pairing mode, simply slide the
switch toward the microphone (ON position).
After a few moments, the indicator light
becomes steadily lit in blue.
Note: If the headset has previously been paired with other
devices, you need to turn those devices off before sliding the
switch to the ON position. If you already slid the switch to the
ON position, toggle the switch OFF and ON (after ensuring
devices are turned off) to enter pairing mode.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
USING YOUR
UR H550
TROUBLESHOOTING
BLESH
See
Features and
Functions Guide
uide
on the reverse side
for information on
using your H550
My headset will not enter p
pairing mode.
previously paired
Make sure that any devices p
with the headset are
off. If the indicator
re turned o
light is flashing in blue,
turn off the other device
ue tur
and wait for 10 seconds. The indicator light
becomes steadily lit in blue indicating the
headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
After you have successfully paired your
Afte
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
To save battery power, turn OFF the
headset when you don't use it for an
extended time by sliding the switch
towards the charging plug.
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
Features and
Functions Guide
H550
Bluetooth®
Handsfree Headset
TURNING HEADSET
ON AND OFF
EARHOOKS AND YOUR
HEADSET
To turn your headset on, slide the switch
toward the microphone. The indicator light
flashes blue (if paired with another device),
or is steadily blue (if ready to be paired).
Your H550 headset is supplied with three earhooks.
The earhook is attached onto a hinge pin, and is
placed onto your ear when using your headset. To
install an earhook on your headset:
To turn your headset off, slide the switch
toward the charging plug. The indicator light
will turn off.
1 Open the attached
Slide Switch
IMPORTANT:
Be sure to first follow the
040059o
earhook 90 degrees from
the headset.
2 Gently lift and pull the
1 Open Earhook
top of the earhook up
and off the upper hinge
pin. Then, pull it away to
remove it.
European Union Directives
Conformance Statement
2 Pull Earhook Up
4 Hook the bottom of the
MAKING CALLS
MAKING CALLS CONTINUED
Function
Action
Make a voice dial call
End an active call and
resume a call on hold
Tap a Volume button
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
Tap the Call button
and speak the
name after the tone
Mute or unmute a call
End a call
Tap the Call button
Tap both Volume
buttons
• All other relevant EU Directives.
Receive a call
Tap the Call button
Reject a call
Tap a Volume button
Redial last call
Press and hold the
Call button until you
hear a beep
Answer a second
incoming call
Tap the Call button
Reject a second
incoming call
Tap a Volume button
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
1 Turn the headset power off.
earhook 45 degrees from
the headset.
2 Press the Volume button you want to
assign as the "volume up" button and
slide the switch toward the microphone.
The indicator light is either steadily lit or
flashing in blue.
your ear.
When worn, your headset
will look like this on your
head:
Volume
Buttons
Slide
Switch
Hinge Pin
Action
0168
You can also change the orientation of the
volume buttons on your headset.
earhook onto the lower
hinge pin, then lift and pull
the top of the earhook
over the upper hinge pin.
Function
Hereby, Motorola declares that this
product is in compliance with:
1 Open the attached
3 Press earhook to your ear.
right or left ear use (right
ear use is displayed).
Indicator Light
Once you have attached your desired
earhook, follow these steps to wear your
headset on your ear:
2 Loop the earhook over
3 Position the headset for
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H550.
CHANGING VOLUME
BUTTON ORIENTATION
WEARING THE
HEADSET
Note: Your H550 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Disable the
indicator light
First slide the switch
toward charging plug
(to turn headset off),
then press and hold
both Volume
buttons AND slide
the switch towards
the microphone (to
turn headset on)
INDICATOR LIGHTS
With the Charger Plugged In
Headset Indicator
Headset Status
Steady blue
Charging
Off
Charging complete
With No Charger Plugged In
Headset Indicator
Off
Steady blue
10 rapid blue/purple
flashes
Slow blue pulse
Slow blue flash
Note: Some features are phone/network dependent.
Blue flash
Quick blue flash
Slow purple pulse
Headset Status
Power off
Pairing mode
Pairing successful
Connected
(on a call)
Standby
(not on call)
Idle (not connected)
Incoming/outgoing call
Connected
(on a muted call)
Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
AUDIO TONES
Audio Tone
Single high tone when
pressing volume button
Two tones
repeated every 30 sec.
No audio indications;
deteriorating quality
Ring tone
Single high tone
Low to high tone
Single high tone
Low to high tone
Two ascending tones
Two descending tones
Headset Status
Volume at minimum
or maximum
Low battery
Out of range
Incoming call
Pairing confirmation
Voice activation
End call
Phone network
not available
Mute enabled
Mute disabled
2.
1.
This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
The device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution
3.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the
equipment.
FCC statement in User's Manual (for class B)
"Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 4
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:d8cf93f3-b9e2-48ee-a8e9-76e99dfeec0b
Producer                        : Acrobat Distiller 6.0 (Windows)
Modify Date                     : 2006:08:11 14:17:45+08:00
Create Date                     : 2006:08:11 14:13:39+08:00
Metadata Date                   : 2006:08:11 14:17:45+08:00
Document ID                     : uuid:362b77c0-9b92-49ae-aca7-59d231b66892
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools