Cheng Uei Precision Industry VFBTHSFLK001 Vodafone Bluetooth Headset User Manual MNX 22O1 V1 0 20090316 User G

Cheng Uei Precision Industry Co., Ltd. Vodafone Bluetooth Headset MNX 22O1 V1 0 20090316 User G

User manual

(LED1 and LED2)Flashing Pattern COMMENTFlash 3 timesON (250ms)OFF (250ms)Only applied when user powerson the system.Flash 3 timesON (250ms)OFF (250ms)Only applied when user shutsdown the system.If any mobile devices pairedexists, headset will do autoconnection first. After autoconnection, then pairingfunction will be workableON(300ms)OFF(300ms)ON(100ms)OFF(4900ms) N/AON(100ms)OFF(2900ms) N/AON(100ms)OFF(1900ms) N/AN/AONOFF N/ALED Flashing RequirementsEventPower onPower offPairingStandby - NoConnectedStandby - ACLconnectedSCOConnectedChargingChargingComplete45#123678Sound Indicator SpecificationAction#Sound playedRing tone Ring_valkyriesPower ON 4 Note Rising Scale (150ms GS4DS5 GS5 C6)Power OFF 4 Note Failing Scale (150ms C6GS5 DS5 Gs4)Transfer Audio V Long High (800ms G6)Low Battery Long High (500ms G6)Pair Fail Long Low (500ms G5)SLC(ACL) Connected Short Middle (100ms Gs7)SLC(ACL) Disconnected Short High (100ms G6)Toggle Mute 2 Note Rising Scale (200ms E6 A6)End Of Call 2 Note Falling Scale (300ms A6 E6)Voice Dial Long Middle (500ms Gs7)Last Number Redial Long Middle (500ms Gs7)Answer 2 Note Rising Scale (200ms E6 A6)2 Note Falling Scale (300ms A6 E6)RejectCancel/End 2 Note Falling Scale (300ms A6 E6)123456789101112131415Error Long Low (500ms G5)16360mm60mm110mmMNX-22O1_User GuideVodafone Bluetooth HeadsetVF-BTHS-FLK-001Quick GuideFCC StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) These devices may not cause harmful interference, and (2) these devices must accept any interference received, including interference that may cause undesired operation.European Union NoticeThis device is compliance with the R&TTE Directive (99/5/EC) and conformity to the following European Norms:EN 300 328EN 301 489-01EN 301 489-17The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste.OverviewFrontBackSpeakerMicrophoneLEDCharging connectorEar hookMFB (Main Function Button)ChargingFirst time use: Charge the headset for approximately 2 hours, or until the LED light is offStep 1.Connect the mini connector of charging cable to the charging connector on the headsetStep 2.Connect the USB connector of chargeing cable to the powered USB port on the desktop or laptop.Step 3.LED will flash twice when connected and lights on during charging. After charging complete, LED will turn off.Note: Headset is not functional while charging.How to usePower on / off:Press and hold the MFB for longer than 5 seconds to switchPairing:Before you can use your headset, you must pair it with your phoneStep 1.Power on the headsetStep 2. Turn on the Bluetooth function on the mobile phone and set the phone to search for Bluetooth devices.Step 3.Select the headset (VF-BTHS-FLK-001)Step 4.Enter the passcode 0000 to pair and connect the headset to your phone.Answering / Ending a call:Short press the MFBRejecting an incoming call:Redialing last number:Turning the microphone on/off during a call:Press and hold for longer than 2 secondsPress and hold for longer than 3 secondsPress and hold for longer than 2 secondsSafety Precautions Do not place in heat sources such as radiators, heat registers, stoves, or other products that produce heatDo not use the product in a wet location. If your device does get wet, allow it to dry completely.Do not attempt to open the device.Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.Do not use the incorrect external power source to charge.All of the above precautions apply equally to your device, battery, charging cable.．．．．．．Button Headset status Action Function Ringing Short Press Answer an incoming call Talking Short Press Hang up an active call Idle Short Press Voice Recognition Talking Press and hold for longer than 2 seconds MIC mute/un-mute Ringing Press and hold for longer than 2 seconds To reject the incoming call Idle Press and hold for longer than 3 seconds To redial last number Talking Press and hold for longer than 3 seconds Audio Transfer from the phone to the headset during a call Power off Press and hold for longer than 5 seconds Put Headset into pairing mode when the headset’s state is not connected MFB Power on Press and hold for longer than 5 seconds Power off the headset Button functionTROUBLESHOOTINGIf you phone cannot connect to the headset, do as follows:• Ensure that the headset is charged, powered on, and paired with and connected to your phone.• Ensure that the Bluetooth feature is activated on your phone.• Check that the headset is within 10 meters (30 feet) without obstructions.If your headset is automatically powered off, do as follows:•The battery is too low. Please charge the headset.

Navigation menu