Cheng Uei Precision Industry VFBTHSFLK001 Vodafone Bluetooth Headset User Manual MNX 22O1 V1 0 20090316 User G

Cheng Uei Precision Industry Co., Ltd. Vodafone Bluetooth Headset MNX 22O1 V1 0 20090316 User G

User manual

(LED1 and LED2)
Flashing Pattern COMMENT
Flash 3 times
ON (250ms)
OFF (250ms)
Only applied when user powers
on the system.
Flash 3 times
ON (250ms)
OFF (250ms)
Only applied when user shuts
down the system.
If any mobile devices paired
exists, headset will do auto
connection first. After auto
connection, then pairing
function will be workable
ON(300ms)
OFF(300ms)
ON(100ms)
OFF(4900ms) N/A
ON(100ms)
OFF(2900ms) N/A
ON(100ms)
OFF(1900ms) N/A
N/A
ON
OFF N/A
LED Flashing Requirements
Event
Power on
Power off
Pairing
Standby - No
Connected
Standby - ACL
connected
SCO
Connected
Charging
Charging
Complete
4
5
#
1
2
3
6
7
8
Sound Indicator Specification
Action
#Sound played
Ring tone Ring_valkyries
Power ON 4 Note Rising Scale (150ms GS4
DS5 GS5 C6)
Power OFF 4 Note Failing Scale (150ms C6
GS5 DS5 Gs4)
Transfer Audio V Long High (800ms G6)
Low Battery Long High (500ms G6)
Pair Fail Long Low (500ms G5)
SLC(ACL) Connected Short Middle (100ms Gs7)
SLC(ACL) Disconnected Short High (100ms G6)
Toggle Mute 2 Note Rising Scale (200ms E6 A6)
End Of Call 2 Note Falling Scale (300ms A6 E6)
Voice Dial Long Middle (500ms Gs7)
Last Number Redial Long Middle (500ms Gs7)
Answer 2 Note Rising Scale (200ms E6 A6)
2 Note Falling Scale (300ms A6 E6)
Reject
Cancel/End 2 Note Falling Scale (300ms A6 E6)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Error Long Low (500ms G5)
16
360mm
60mm
110mm
MNX-22O1_User Guide
Vodafone Bluetooth Headset
VF-BTHS-FLK-001
Quick Guide
FCC Statement
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) These devices may not
cause harmful interference, and (2) these
devices must accept any interference
received, including interference that may
cause undesired operation.
European Union Notice
This device is compliance with the R&TTE
Directive (99/5/EC) and conformity to the
following European Norms:
EN 300 328
EN 301 489-01
EN 301 489-17
The crossed-out wheeled bin
means that within the European
Union the product must be taken to
separate collection at the product
end-of-life. Do not dispose of these
products as unsorted municipal
waste.
Overview
Front
Back
Speaker
Microphone
LED
Charging connector
Ear hook
MFB (Main Function Button)
Charging
First time use: Charge the headset for
approximately 2 hours, or until the LED
light is off
Step 1.
Connect the mini
connector of
charging cable to
the charging
connector on the
headset
Step 2.
Connect the USB
connector of
chargeing cable
to the powered
USB port on the
desktop or laptop.
Step 3.LED will flash twice when connected and lights
on during charging. After charging complete, LED will
turn off.
Note: Headset is not functional while charging.
How to use
Power on / off:
Press and hold the MFB for longer than 5 seconds to switch
Pairing:
Before you can use your headset, you must pair it with your
phone
Step 1.Power on the headset
Step 2. Turn on the Bluetooth function on the mobile phone
and set the phone to search for Bluetooth devices.
Step 3.Select the headset (VF-BTHS-FLK-001)
Step 4.Enter the passcode 0000 to pair and connect the
headset to your phone.
Answering / Ending a call:
Short press the MFB
Rejecting an incoming call:
Redialing last number:
Turning the microphone on/off
during a call:
Press and hold for longer than 2 seconds
Press and hold for longer than 3 seconds
Press and hold for longer than 2 seconds
Safety Precautions
Do not place in heat sources such as radiators, heat registers,
stoves, or other products that produce heat
Do not use the product in a wet location. If your device does get
wet, allow it to dry completely.
Do not attempt to open the device.
Do not drop, knock, or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
Do not use the incorrect external power source to charge.
All of the above precautions apply equally to
your device, battery, charging cable.
．
．
．
．
．
．
Button
Headset
status
Action
Function
Ringing
Short Press
Answer an incoming call
Talking
Short Press
Hang up an active call
Idle
Short Press
Voice Recognition
Talking
Press and hold
for longer than 2
seconds
MIC mute/un-mute
Ringing
Press and hold
for longer than 2
seconds
To reject the incoming call
Idle
Press and hold
for longer than 3
seconds
To redial last number
Talking
Press and hold
for longer than 3
seconds
Audio Transfer from the phone
to the headset during a call
Power off
Press and hold
for longer than 5
seconds
Put Headset into pairing mode when
the headset’s state is not connected
MFB
Power on
Press and hold
for longer than 5
seconds
Power off the headset
Button function
TROUBLESHOOTING
If you phone cannot connect to the headset, do as
follows:
• Ensure that the headset is charged, powered on, and
paired with and connected to your phone.
• Ensure that the Bluetooth feature is activated on your
phone.
• Check that the headset is within 10 meters (30 feet)
without obstructions.
If your headset is automatically powered off, do
as follows:
•The battery is too low. Please charge the headset.

Navigation menu