Chengdu Ledong Information Technology SWO1801 Runtopia S1 Smart GPS Sport Watch (BT LE) User Manual
Chengdu Ledong Information Technology Co., Ltd Runtopia S1 Smart GPS Sport Watch (BT LE)
user manual
Runtopia S1 Smart GPS Sport Watch User Manual
Wear the watch at a finger width distance from
the wrist and adjust the strap to a comfortable
tightness.
*Tip: Adjusting the strap too loose may affect the accuracy
of the collected data of the heart rate sensor.
Wearing the watch
01
Attach the metal contact of the charging wire to the
metal piece on the back of the watch, and connect.
Charge the watch with the charging head (5V 1A) or
computer's USB port.
Back of watch Charging contact
Charging the watch
02
3.1 Download and install the Runtopia app
Search for “Runtopia" on Google Play or the App
Store, or Scan the QR code below to download.
Connecting the watch
03
*Tip: When using the touch screen, slide your finger
horizontally from the edge of the screen to the center
of the screen or slide up and down.
Watch buttons and use
04
Upper right button:
Keep pressed to begin a workout
Press to cancel or return to
the previous page
Keep pressed to turn on/off
Press to enter page/
Touch screen use:
Supports clicking/
holding down / sliding
Lower right button:
3.2 Binding connection
After installing Runtopia app, after registering and
logging in, enter "Me" page, click "Devices &
Gadgets", choose "Runtopia S1", and then follow
the prompts to complete the binding.
*Tip: For Android 4.4 and above, or iOS 9.0 and above.
Please connect to the Runtopia App and see more
usage tips on the watch device details page.
More use introduction
05
GPS Watch x1 Charging Cable x1
Runtopia S1 Smart GPS Sport Watch Product Info
Manufacturer: Chengdu Ledong Information &
When using the watch for the first time, please connect the
Runtopia app to the watch as soon as possible and the watch
will be updated automatically.
Precautions
Product Specifications
The watch has IP68 dustproof and waterproof rating, but
cannot be worn when showering in hot water, or when
swimming or diving in the ocean.
If not using the watch for long periods of time, keep charging
the watch once a month.
Product name: Runtopia S1 Smart GPS Sport Watch
Model name: SWO1801
Battery capacity: 300mAh
Type of battery: Lithium ion polymer battery
Operating temperature: -10°C to 50°C (14°F to 122°F)
Wireless connection: Bluetooth 5.0 BLE
Compatibility: Android 4.4 and above or iOS 9.0 and above
Power supply: 5V 1A
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
� Reorient or relocate the receiving antenna.
� Increase the separation between the equipment and receiver.
� Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
� Consult the dealer or an experienced radio/TV technician for
help.
15.2 1:
FCC Caution: Any changes or modifi cations not expres sly
approved by the p artyresponsible for compliance could void
the user's authority to operate this equipment.
The device has been evaluated to meet general RF exposure
requirement, The device can be used in portable exposure
condition without restriction Federal Communication Commis-
sion (FCC) Radiation Exposure Statement Power is so low
that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications or
changes to this equipment. Such modifications or changes
could void the user’s authority to operate the equipment.
Federal Communication Commission
(FCC) Radiation Exposure Statement
Made in China
Gaoxin District, Chengdu, China
Address：13F，D-7, Tianfu Software Park,
Technology Co., Ltd.
FCC ID: 2ANPU-SWO1801