Chengdu XGIMI Technology XE10F LED Projector User Manual 6

Chengdu XGimi Technology Co.,Ltd. LED Projector 6

Contents

User Manual pt 1

User Manual
move power switch
Audio in
HDMI
USB3.0
USB2.0
power in
Remote control
Powe on/off Mute
Focus Shortcut button Focus
Direction & Entrance
Back Menu Home
Vo l u m e - Vo l u m e +
1,xgimi super screenless TV
Connect power
Slide lens cap, turn on xgimi super screenless TV
Focusing upon wheel, make the picture clear
2, Remote control matching
Place remote control in 10cm of xgimi super screenless TV
Press the “home”button and “Back” button at the same time, loosen it as the remote control back
indicator light quickly flash and go out, it show that the match is ok
Wait a few seconds, the remote control is ok to use
3, Move power function
Charge for mobile devices
Connect the super TV with mobile phone by USB cable,long press 2 seconds, move power turn off
and on the charge function; the red led on means charging, and off means close or no power
Power check:
Press the switch of move power, Green light means power≥50%; Red light means power ≤
50%,no light on means no power
Notes: xgimi super screenless TV support the xgimi power adapter charge, don’t support USB
charge
Xgimi Assistant
Mobile control xgimi super screenless TV, scan the QR code,download xgimi assistant
Mobile phone resources:easy to push the mobile phone resource to the screenless TV with one
button, browse pictures and videos freely
Frequency control: Xgimi super screenless TV one-key synchronize to the mobile phone. Support
resco bubbles games operate
Mobile remote control: Mobile phone control the super TV easily
Warranty List:
All the following items under the condition of non-artificial damage
7 days full-refund or change to the same type and model product , since the date of got the
projector.
30 days freely change to the same type and model product,since the date of got the projector.
1 years repair,since the date of got the projector.
Warranty Exemption Clause:
Exceed the warranty
Unauthorized repair, misuse, collision, neglect, abuse, changes into a liquid, accidents, and
incorrect installation caused goods quality problem, or tear, altered labeling, machine serial
number, anti-counterfeiting tags
Force majeure such as fire ,flooding ,lightning damage
Due to failures human operate
Use other non-xgimi accessories,or fault operate,lead to product failure or accident
Operate and maintenance do not obey the user’s manual
Contact us
Chengdu Xgimi Technology Co.Ltd
Add:A705,Tianfu Software Park, Hi-tech Zone,Chengdu
China hotline: 400-0028-960
Website: www.xgimi.com
Declaration
This is A-class products, in the living environment, the product may cause radio interference, in
this case, may require users take concrete and effective measures to avoid the interference
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

Navigation menu