Chengdu XGIMI Technology XE10F LED Projector User Manual 6
Chengdu XGimi Technology Co.,Ltd. LED Projector 6
Contents
- 1. User Manual pt 1
- 2. User Manual pt 2
User Manual pt 1
User Manual move power switch Audio in HDMI USB3.0 USB2.0 power in Remote control Powe on/off Focus Mute Shortcut button Focus Direction & Entrance Back Menu Volume1,xgimi super screenless TV Connect power Slide lens cap, turn on xgimi super screenless TV Focusing upon wheel, make the picture clear Home Volume+ 2, Remote control matching Place remote control in 10cm of xgimi super screenless TV Press the “home”button and “Back” button at the same time, loosen it as the remote control back indicator light quickly flash and go out, it show that the match is ok Wait a few seconds, the remote control is ok to use 3, Move power function Charge for mobile devices Connect the super TV with mobile phone by USB cable,long press 2 seconds, move power turn off and on the charge function; the red led on means charging, and off means close or no power Power check: Press the switch of move power, Green light means power≥50%; Red light means power ≤ 50%,no light on means no power Notes: xgimi super screenless TV support the xgimi power adapter charge, don’t support USB charge Xgimi Assistant Mobile control xgimi super screenless TV, scan the QR code,download xgimi assistant Mobile phone resources:easy to push the mobile phone resource to the screenless TV with one button, browse pictures and videos freely Frequency control: Xgimi super screenless TV one-key synchronize to the mobile phone. Support resco bubbles games operate Mobile remote control: Mobile phone control the super TV easily Warranty List: All the following items under the condition of non-artificial damage 7 days full-refund or change to the same type and model product , since the date of got the projector. 30 days freely change to the same type and model product,since the date of got the projector. 1 years repair,since the date of got the projector. Warranty Exemption Clause: Exceed the warranty Unauthorized repair, misuse, collision, neglect, abuse, changes into a liquid, accidents, and incorrect installation caused goods quality problem, or tear, altered labeling, machine serial number, anti-counterfeiting tags Force majeure such as fire ,flooding ,lightning damage Due to failures human operate Use other non-xgimi accessories,or fault operate,lead to product failure or accident Operate and maintenance do not obey the user’s manual Contact us Chengdu Xgimi Technology Co.Ltd Add:A705,Tianfu Software Park, Hi-tech Zone,Chengdu China hotline: 400-0028-960 Website: www.xgimi.com Declaration This is A-class products, in the living environment, the product may cause radio interference, in this case, may require users take concrete and effective measures to avoid the interference This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Fred.Zhu Create Date : 2015:10:29 22:42:42+08:00 Modify Date : 2015:10:29 22:42:42+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : Microsoft Word - 6.user Manual.doc Creator : Fred.Zhu Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:23658f45-fb29-4e9d-b000-7a6612d8043d Instance ID : uuid:16313c49-2200-430b-9ae9-e87fdd097d44 Page Count : 4EXIF Metadata provided by EXIF.tools