Chenyu Technology CY007 AR-Gun User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3620307
Application ID	owz8zouGS27B90aTatqoLg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	59.86kB (748290 bits)
Date Submitted	2017-10-27 00:00:00
Date Available	2017-10-27 00:00:00
Creation Date	2017-10-24 03:47:31
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2017-10-24 03:47:31
Document Title	User manual
Document Creator	Microsoft® Office Word 2007
Document Author:	John Nystrom

User Manual
Let's get blasting
Product Name: AR-Gun
Model: CY007, AR King,CY008,CY009,
CY010,AR007,AR008,AR009
Bit AR Club
Manufacture: Chenyu
Technology(Shenzhen)Co.,Ltd.
ATTENTION
c o mp a t i b l e w i t h
g a me s f r o m B i t
AR Club only
What's what?
Safety & Care
Safety Precautions: Following these precautions reduces the risk
of and damage to the product.
PROTECT THIS DEVICE: Keep device dry and out of sunlight for extended periods
of time.
SWITCH OFF IN RESTRICTED AREAS: Do not use where mobile devices are not
authorized or when it may cause interference or danger. Do not operate while
driving.
Phone Holder
MEDICAL IMPLANTS: This device emits Radio Frequency energy and may
interfere with medical devices. Consult a doctor or the manufacturer of the medical
equipment to see if the equipment is adequately protected from Radio Frequency
energy.
AUTHORIZED PERSONNEL: Only qualified personnel are authorized to repair
this product. Do not open this product other than to change the batteries. There are
no user-serviceable parts inside.
Battery
Door
Lock
Screw
ACCESSORIES: Only use Alkaline batteries. Do not use rechargeable batteries as
they may cause harm to the product. Incompatible batteries may explode.
LED Flashing
Lights
DISPOSAL OF YOUR DEVICE: This product should not be disposed of with other
household waste. To prevent possible harm to the environment or human health,
recycle it responsibly.
Trigger
Some Games may be too graphic for small
children.
Recommended for ages 14 and up.
Also Included
Compliance with FCC Regulations
ATTENTION: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Warranty
Philips
Screwdriver
AA Alkaline Batteries
-1-
This device comes with a one year warranty. Please visit our website for details;
www.beantech.net go to AR Products > ARG1 > Support > Warranty. Not for use
with third party games or software. All games available through
Bit AR
Club App.
assembled
in China
SD7
-6-
Need help?
Get the Required App
Cannot SYNC - Make sure batteries are ok and in correct polarity
position. Make sure phone bluetooth is ON. Make sure AR Blaster isn't
already synced to another phone, then retry SYNC outlined in this guide.
Cannot Re-SYNC - - Make sure batteries are ok and in correct polarity
position. Make sure phone bluetooth is ON. Fully exit Bit AR Club on
your phone, then follow SYNC procedure. NOTE: In some cases you
may need to reset AR Blaster by removing batteries and re-inserting.
Cannot obtain Bit AR App - We recommend obtaining a QR code
scanning app from your phone's app store. There are several Free
choices. If still cannot scan, go to our website to obtain:
www.beantech.net, then go to AR Blaster > Support. Click on Bit AR
Club App. Note: with Android phone, insure security settings are set to
allow installation of apps from unknown sources.
AR Blaster won't work on my phone - All games acquired through Bit
VR App are certified to work on iOS 7.0 and higher and Android 5.0 and
higher phones. You also need to insure your phone's bluetooth version is
4.0 or higher. If your phone is lower than the required operating system
version, please update and retry. If you still cannot sync, contact your
phone manufacturer to determine bluetooth version. If it is an earlier
version to 4.0 you will be unable to sync with that phone. Note: its highly
unlikely your bluetooth is version lower than 4.2
IMPORTANT:
1. You must obtain Bit AR Club App in order to Sync with
your phone and to obtain games. Please scan QR code
below to obtain Bit AR Club App.
2. Use only games found in Bit AR Club for insured
compatibility with AR Blaster.
Bit AR Club is your home for games
and apps that are compatible with
AR BLASTER
Compatible with:
■ iPhone - iOS 7.0 or higher
■ Android - 5.0 or higher
■ Bluetooth 4.2or higher required
scan here
After scanning, select from iOS or Android version of the App,
then load it to your phone.
Call us for Assistance
Toll Free / 9AM - 7PM est daily except holidays
888-308-BEAN
E-mail us for Assistance
support@beantech.net
-5-
Insert Batteries
Use the Philips head screwdriver supplied to open battery compartment door
located in the grip of the AR Blaster, and insert two AA batteries (included).
IMPORTANT: Use only Alkaline batteries. Do Not use rechargeable
batteries.
-2-
SYNC to Phone
Start Blasting
1. Turn OFF bluetooth on all phones in the reception area
except the phone you will sync to. Turn it's bluetooth ON.
2. Connect phone to Wi-Fi and open Bit AR App.
3. Squeeze AR BLASTER's Trigger for 30 seconds.
AR Blaster should now be synced with your phone. If sync
doesn't occur, close Bit AR App and repeat above steps.
Game Interface will appear on phone when synced.
NOTES:
1.
AR BLASTER can only sync with one phone at a time.
2.
When not using AR BLASTER for 10 minutes or more, it will enter
SLEEP mode. To re-start, make sure phone Bluetooth is ON - then
hold trigger for 3 seconds. If AR Blaster does not re-SYNC, fully
exit the Bit AR Club app on your phone. Re-open it and start the resync again. NOTE: If you are unable to fully exit the app, an
alternative method is to remove the batteries for AR Blaster and reinsert, then re-sync.
3.
If using Android phone, make sure Security Settings are set to allow
for installation of apps from unknown sources.
4.
To change phones, remove and
batteries in AR BLASTER,
- 3 re-insert
then follow sync procedure for new phone sync.
1. Attach phone holder by screwing it into the top of AR
BLASTER, then insert your phone into holder. Select
from vertical or horizontal viewing by using the
corresponding screw port on the holder.
2. Select and enter desired game on the phone, then use
Trigger on AR Blaster to interact.
AR Blaster comes with several FREE games. Additional games
are available for purchase. All games are available through Bit
VR Club. Check often as games will be added and updated
regularly.
-4-
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions,may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : John Nystrom
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2017:10:24 03:47:31+08:00
Modify Date                     : 2017:10:24 03:47:31+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools