Cherry Europe AFIM5002 energy autarkic switch module User Manual UserManual

ZF Friedrichshafen AG energy autarkic switch module UserManual

UserManual

Product supplementary sheet to Energy harvesting wireless switch module AFIM-5002 Safety instructions 1. Application field Batteryless and wireless RF switch module. 2. Product description The energy harvesting wireless switch module includes a generator which converts the mechanical energy of the actuation into electrical energy. The energy is used for the RF electronics and the data is transmitted without batteries and wires via 915 MHz to a receiver. The energy harvesting wireless switch module is network-compatible. A flexible ‟Pairing” allows the operation of several receivers with one switch module (and vice versa). Each wireless RF switch module has a ‟Unique ID” which excludes a mutual interference between different RF-switch modules. 3. Technical Data Temperature range -40 to +85 °C Lifetime generator up to 1,000,000 operations Frequency bands 915 MHz Modulation 2FSK Protocol ZF Proprietary RF distance (open area) up to 300 m RF distance (in buildings) up to 30 m Operating force max. 15 N Operating speed 0.03 – 0.25 m/s Energy generated min. 0.33 mWs 4. Dimensions
5. Declaration of Conformity This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. 6. Disposal Dispose of the used components of the evaluation kit at an official collection point for electronic waste or at your local dealer. 7. Contact ZF Friedrichshafen AG Cherrystraße 91275 Auerbach Model: AFIM-5002 FCC ID: GDDAFIM5002 IC ID:11057A-AFIM5002 CAN RSS_Gen/CNR_Gen This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu