Chi Mei Communication Systems 0907SEU GSM DUAL-BAND MOBILE PHONE User Manual SEG QSG EN

Chi Mei Communication Systems, Inc. GSM DUAL-BAND MOBILE PHONE SEG QSG EN

Users Manual

Table of ContentsTable of ContentsYour Phone ...................................................................1SIM Card and Battery Installation..................................2Solar Charging...............................................................3Get the best from your solar charging phone ................4Screen Display and Icons..............................................6Making a Call.................................................................7Answering or Rejecting a Call .......................................8Contacts ........................................................................8Messaging .....................................................................9Phone Settings ............................................................11Safety & Compliance Certificate..................................... i
1Quick Start Guide1Your Phonea/AEarpieceDisplayscreenLeft soft keyBack keyNavigation keyCancel/Power keyConfirmation keyRight soft keyKeypadWrist strap holderUSB connectorSpeakerTurning the Phone On/OffTo turn the phone on/off, press and hold the Cancel/Power key for 3 seconds.Solar panelQuick Start Guide2SIM Card and Battery Installation1. Place your finger in the finger slot and remove the cover.2. Insert the SIM card in the card slot. Make sure the gold contacts are facing down and the cut-off corner facing downwards from the top of the device.3. Insert the battery. Make sure the contacts of the battery are aligned with the connectors on the battery compartment.4. Align the tabs with the holes on the phone and push to close the back cover.
2Quick Start Guide1Your Phonea/AEarpieceDisplayscreenLeft soft keyBack keyNavigation keyCancel/Power keyConfirmation keyRight soft keyKeypadWrist strap holderUSB connectorSpeakerTurning the Phone On/OffTo turn the phone on/off, press and hold the Cancel/Power key for 3 seconds.Solar panelQuick Start Guide2SIM Card and Battery Installation1. Place your finger in the finger slot and remove the cover.2. Insert the SIM card in the card slot. Make sure the gold contacts are facing down and the cut-off corner facing downwards from the top of the device.3. Insert the battery. Make sure the contacts of the battery are aligned with the connectors on the battery compartment.4. Align the tabs with the holes on the phone and push to close the back cover.
3Quick Start Guide3Removing the batteryInsert your finger in the finger slot, then gently lift the battery to remove it.Charging the battery1. With the battery inside the compartment, connect the USB adapter to the phone.2. Plug the USB adapter into a wall outlet to start charging.3. A “Charging” message will appear on the screen.To fully charge the battery, charge it for 2 hours. Battery life may vary depending on the application.Solar ChargingThe phone can also be charged using sunlight.• To charge via sunlight, face the Solar panel of the device in the direction of sunlight.• Under maximum direct sunlight, 1 hour of charge will give 12 hours of standby time or 12 minutes of talktime.• Solar charging turns off at 60°C to protect your phone.• indicates charging under weak sunlight.• indicates charging under strong sunlight.Quick Start Guide4Get the best from your solar charging phone• Position the phone so the panel is directly facing the sun. From time to time you may need to reposition the phone. Tilting the phone towards the sun will help.• The best time of day to charge is between 10am and 2pm when the sun is at its brightest.• Glass blocks solar energy, especially when it is tinted, such as the glass used in a car or office building. Avoid anything which reduces the amount of light (such as clouds, shadows etc).• To avoid damaging your phone or decreasing its effectiveness, do not place it inside a car for 1 Hour Maximum SunTalk TimeStandby12 minutes12 hours
4Quick Start Guide3Removing the batteryInsert your finger in the finger slot, then gently lift the battery to remove it.Charging the battery1. With the battery inside the compartment, connect the USB adapter to the phone.2. Plug the USB adapter into a wall outlet to start charging.3. A “Charging” message will appear on the screen.To fully charge the battery, charge it for 2 hours. Battery life may vary depending on the application.Solar ChargingThe phone can also be charged using sunlight.• To charge via sunlight, face the Solar panel of the device in the direction of sunlight.• Under maximum direct sunlight, 1 hour of charge will give 12 hours of standby time or 12 minutes of talktime.• Solar charging turns off at 60°C to protect your phone.• indicates charging under weak sunlight.• indicates charging under strong sunlight.Quick Start Guide4Get the best from your solar charging phone• Position the phone so the panel is directly facing the sun. From time to time you may need to reposition the phone. Tilting the phone towards the sun will help.• The best time of day to charge is between 10am and 2pm when the sun is at its brightest.• Glass blocks solar energy, especially when it is tinted, such as the glass used in a car or office building. Avoid anything which reduces the amount of light (such as clouds, shadows etc).• To avoid damaging your phone or decreasing its effectiveness, do not place it inside a car for 1 Hour Maximum SunTalk TimeStandby12 minutes12 hours
5Quick Start Guide5long periods of time. This envi-ronment can get extremely hot• The phone will give a warning beep every 150 seconds if it gets too hot. Please place the phone somewhere cooler if this happens.Quick Start Guide6Screen Display and IconsIcon Description Icon DescriptionIndicates network signal strength. Indicates the phone line in use.Indicates a message has been received. Indicates missed call.Indicates the phone is in Silent mode. Indicates the battery charge, level 3 - 0.Note: A moving battery bar indicates that the battery is charging.Indicates the phone is in Meeting mode.Indicates the phone is in Outdoor mode.Indicates the phone is in Car mode. Indicates the alarm is set.Indicates the phone is in Home mode. Indicates the phone is in Office mode.Indicates charging under weak sunlight.Indicates charging under strong sun-light.MenuMobileCalls01-Jan-0000:02Text and graphics areaSoft key indications• To select Calls, press the left soft key.• To select Menu, press the right soft key.Soft key indications may vary.Icons areaWhen the phone is turned on, the main screen is displayed as shown on the right.
6Quick Start Guide5long periods of time. This envi-ronment can get extremely hot• The phone will give a warning beep every 150 seconds if it gets too hot. Please place the phone somewhere cooler if this happens.Quick Start Guide6Screen Display and IconsIcon Description Icon DescriptionIndicates network signal strength. Indicates the phone line in use.Indicates a message has been received. Indicates missed call.Indicates the phone is in Silent mode. Indicates the battery charge, level 3 - 0.Note: A moving battery bar indicates that the battery is charging.Indicates the phone is in Meeting mode.Indicates the phone is in Outdoor mode.Indicates the phone is in Car mode. Indicates the alarm is set.Indicates the phone is in Home mode. Indicates the phone is in Office mode.Indicates charging under weak sunlight.Indicates charging under strong sun-light.MenuMobileCalls01-Jan-0000:02Text and graphics areaSoft key indications• To select Calls, press the left soft key.• To select Menu, press the right soft key.Soft key indications may vary.Icons areaWhen the phone is turned on, the main screen is displayed as shown on the right.
7Quick Start Guide7Making a Call1. Enter the phone number on the keypad. 2. Select the Call option using left soft key.΅Π͑ΔΒΝΝ͑ΒΟ͑ΚΟΥΖΣΟΒΥΚΠΟΒΝ͑ΟΦΞΓΖΣ͑͝ΡΣΖΤΤ͑ΒΟΕ͑ΙΠΝΕ͑͑͡ΥΠ͑ΕΚΤΡΝΒΪ͑ΥΙΖ͑ΚΟΥΖΣΟΒΥΚΠΟΒΝ͑ΒΔΔΖΤΤ͑ΔΙΒΣΒΔΥΖΣ͑“+”ΥΙΖΟ͑ΖΟΥΖΣ͑ΥΙΖ͑ΡΙΠΟΖ͑ΟΦΞΓΖΣ͟To make a call from Contacts1. Press the Down key to view Contacts list.2. Enter the first letters of the Contact you wish to call. The phone filters the list based on the characters you enter.3. Use the Up and Down key to select the Contact, then Select the Call option using left soft key.To make a call from the Dialed list1. Select the Call option using left soft key to view Dialed list.2. Use the Up and Down key to select the call.3. Select the Call option using left soft key.Quick Start Guide8Answering or Rejecting a CallTo answer an incoming call, press the Call key.To reject a call, press the Right Soft key to select Busy.ContactsTo add a Contact1. Enter the phone number.2. Select Options >Savenumber.3. Select New contact > Add.4. Enter the name of the contact.5. Select Save to save the Contact.To copy SIM Contacts1. Select Menu to activate the main menu.2. Select Contacts > Options >Settings > Copy from SIM > Copy all.3. Select Yes to confirm.΅Π͑ΔΠΡΪ͑ΚΟΕΚΧΚΕΦΒΝ͑ʹΠΟΥΒΔΥΤ͑ΗΣΠΞ͑΄ͺ;͑͝ΤΖΝΖΔΥ͑ʹΠΡΪ͑Β͑ΟΦΞΓΖΣ͑ΥΙΖΟ͑ΤΖΝΖΔΥ͑ΖΒΔΙ͑ΔΠΟΥΒΔΥ͑ΥΠ͑ΔΠΡΪ͟
8Quick Start Guide7Making a Call1. Enter the phone number on the keypad. 2. Select the Call option using left soft key.΅Π͑ΔΒΝΝ͑ΒΟ͑ΚΟΥΖΣΟΒΥΚΠΟΒΝ͑ΟΦΞΓΖΣ͑͝ΡΣΖΤΤ͑ΒΟΕ͑ΙΠΝΕ͑͑͡ΥΠ͑ΕΚΤΡΝΒΪ͑ΥΙΖ͑ΚΟΥΖΣΟΒΥΚΠΟΒΝ͑ΒΔΔΖΤΤ͑ΔΙΒΣΒΔΥΖΣ͑“+”ΥΙΖΟ͑ΖΟΥΖΣ͑ΥΙΖ͑ΡΙΠΟΖ͑ΟΦΞΓΖΣ͟To make a call from Contacts1. Press the Down key to view Contacts list.2. Enter the first letters of the Contact you wish to call. The phone filters the list based on the characters you enter.3. Use the Up and Down key to select the Contact, then Select the Call option using left soft key.To make a call from the Dialed list1. Select the Call option using left soft key to view Dialed list.2. Use the Up and Down key to select the call.3. Select the Call option using left soft key.Quick Start Guide8Answering or Rejecting a CallTo answer an incoming call, press the Call key.To reject a call, press the Right Soft key to select Busy.ContactsTo add a Contact1. Enter the phone number.2. Select Options >Savenumber.3. Select New contact > Add.4. Enter the name of the contact.5. Select Save to save the Contact.To copy SIM Contacts1. Select Menu to activate the main menu.2. Select Contacts > Options >Settings > Copy from SIM > Copy all.3. Select Yes to confirm.΅Π͑ΔΠΡΪ͑ΚΟΕΚΧΚΕΦΒΝ͑ʹΠΟΥΒΔΥΤ͑ΗΣΠΞ͑΄ͺ;͑͝ΤΖΝΖΔΥ͑ʹΠΡΪ͑Β͑ΟΦΞΓΖΣ͑ΥΙΖΟ͑ΤΖΝΖΔΥ͑ΖΒΔΙ͑ΔΠΟΥΒΔΥ͑ΥΠ͑ΔΠΡΪ͟
9Quick Start Guide9To create Groups1. Select Menu > Contacts >Options >Settings >Groups.2. Select New group > Add.3. Enter the Group name and select Continue.4. Use the Up,Down and select Select to select the Contacts to add to the Group.5. Select Done to save.MessagingSending a text message1. Select Menu > Messages > Create message > Enter phone no.2. Enter the phone number to send message to.3. Type your message.4. Select Send to send the message.΅Π͑ΤΖΟΕ͑ΞΖΤΤΒΘΖ͑ΥΠ͑Β͑ʹΠΟΥΒΔΥ͑͝ΤΖΝΖΔΥ͑;ΖΟΦ͑ͯ͑;ΖΤΤΒΘΖΤ͑ͯ͑ʹΣΖΒΥΖ͑ΞΖΤΤΒΘΖ͑ͯ͑ʹΠΟΥΒΔΥΤ͑ΝΠΠΜ͞ΦΡ͑Entering Text• Press repeatedly to toggle between Abc, ABC, and abc.• Select Options > Add symbol to insert symbols.*Quick Start Guide10Predictive text inputYour phone comes with the predictive text input feature that allows you to enter text by pressing only one key per letter. To disable the predictive text input, select Options > Dictionary > OFF.As you enter a word, the phone will automatically compare all of the possible letter combinations against a built-in dictionary of words, and determine which word you intended to type. If it guesses incorrectly, you can scroll through other possible words by pressing the Up and Down keys without re-entering the word.
10Quick Start Guide9To create Groups1. Select Menu > Contacts >Options >Settings >Groups.2. Select New group > Add.3. Enter the Group name and select Continue.4. Use the Up,Down and select Select to select the Contacts to add to the Group.5. Select Done to save.MessagingSending a text message1. Select Menu > Messages > Create message > Enter phone no.2. Enter the phone number to send message to.3. Type your message.4. Select Send to send the message.΅Π͑ΤΖΟΕ͑ΞΖΤΤΒΘΖ͑ΥΠ͑Β͑ʹΠΟΥΒΔΥ͑͝ΤΖΝΖΔΥ͑;ΖΟΦ͑ͯ͑;ΖΤΤΒΘΖΤ͑ͯ͑ʹΣΖΒΥΖ͑ΞΖΤΤΒΘΖ͑ͯ͑ʹΠΟΥΒΔΥΤ͑ΝΠΠΜ͞ΦΡ͑Entering Text• Press repeatedly to toggle between Abc, ABC, and abc.• Select Options > Add symbol to insert symbols.*Quick Start Guide10Predictive text inputYour phone comes with the predictive text input feature that allows you to enter text by pressing only one key per letter. To disable the predictive text input, select Options > Dictionary > OFF.As you enter a word, the phone will automatically compare all of the possible letter combinations against a built-in dictionary of words, and determine which word you intended to type. If it guesses incorrectly, you can scroll through other possible words by pressing the Up and Down keys without re-entering the word.
11Quick Start Guide11Phone SettingsTo adjust volumeDuring a phone conversation, press the navigation key to increase or decrease the volume.To set the ringtone1. Select Menu > Settings > Sounds & alerts >Ringtone.2. Select Line 1 calls or Line 2 calls.3. Select the ringtone from the list.4. Press the Confirmation key.To adjust other settings, the following submenu items are available:• Ring volume• Silent mode• Increasing ring• Vibrating alert• Message alert• Key sound΁ΣΖΤΤ͑ΒΟΕ͑ΙΠΝΕ͑ΥΙΖ͔͑͑ΜΖΪ͑ΥΠ͑΢ΦΚΔΜΝΪ͑ΤΨΚΥΔΙ͑ΥΙΖ͑ΡΙΠΟΖ͑ΥΠ͑΄ΚΝΖΟΥ͑ΞΠΕΖ͟To set the alarm1. From the main screen, select Menu>Applications>Alarm>Alarm.To set recurrent alarm, select Menu > Applications>Alarm > Recurrent alarm.2. Enter the time to sound the alarm.3. Press the Confirmation key to save settings.Quick Start Guide12To change the date and time1. From the main screen, select Menu > Settings > Initial Setup > Time & date.2. Select the submenu to change.3. Enter the desired value.4. Press the Confirmation key to save settings.To change profile1. Select Menu > Settings > Profiles.2. Select profile from the list.3. Press the Confirmation key.To lock / unlock keypad• Press the key, then select Lock / Unlock.To reset all settingsYou can easily reset the phone to its default settings.1. Select Menu > Settings > Initial Setup > Reset settings.2. Select Continue >Continueto start the reset.To reset all settings and erase all user data select Menu > Settings > Initial Setup > Master Reset.a/A΅ΙΖ͑ΕΖΗΒΦΝΥ͑ΤΖΔΦΣΚΥΪ͑ΔΠΕΖ͑ΚΤ͑͟͡͡͡͡͡͡͡͡
12Quick Start Guide11Phone SettingsTo adjust volumeDuring a phone conversation, press the navigation key to increase or decrease the volume.To set the ringtone1. Select Menu > Settings > Sounds & alerts >Ringtone.2. Select Line 1 calls or Line 2 calls.3. Select the ringtone from the list.4. Press the Confirmation key.To adjust other settings, the following submenu items are available:• Ring volume• Silent mode• Increasing ring• Vibrating alert• Message alert• Key sound΁ΣΖΤΤ͑ΒΟΕ͑ΙΠΝΕ͑ΥΙΖ͔͑͑ΜΖΪ͑ΥΠ͑΢ΦΚΔΜΝΪ͑ΤΨΚΥΔΙ͑ΥΙΖ͑ΡΙΠΟΖ͑ΥΠ͑΄ΚΝΖΟΥ͑ΞΠΕΖ͟To set the alarm1. From the main screen, select Menu>Applications>Alarm>Alarm.To set recurrent alarm, select Menu > Applications>Alarm > Recurrent alarm.2. Enter the time to sound the alarm.3. Press the Confirmation key to save settings.Quick Start Guide12To change the date and time1. From the main screen, select Menu > Settings > Initial Setup > Time & date.2. Select the submenu to change.3. Enter the desired value.4. Press the Confirmation key to save settings.To change profile1. Select Menu > Settings > Profiles.2. Select profile from the list.3. Press the Confirmation key.To lock / unlock keypad• Press the key, then select Lock / Unlock.To reset all settingsYou can easily reset the phone to its default settings.1. Select Menu > Settings > Initial Setup > Reset settings.2. Select Continue >Continueto start the reset.To reset all settings and erase all user data select Menu > Settings > Initial Setup > Master Reset.a/A΅ΙΖ͑ΕΖΗΒΦΝΥ͑ΤΖΔΦΣΚΥΪ͑ΔΠΕΖ͑ΚΤ͑͟͡͡͡͡͡͡͡͡
iQuick Start GuideiSafety & Compliance CertificateSAFETY INFORMATION• Use only the batteries and power adapter provided by the manufacturer. The use of unauthorized accessories may void your warranty.• Do not remove the battery while the phone is charging.• Avoid using the phone near electromagnetic souces such as TVs, radios, and microwave ovens.• Unplug the power adapter from the wall outlet during lightning storms to avoid electric shock or fire.• Do not store your phone in temperatures higher than 60ºC or 140ºF.• Do not use harsh chemicals or detergents to clean your phone. • Do not handle the phone with wet hands while it is being charged. This may cause an electric shock or serious damage to the phone.SAFETY PRECAUTIONS FOR BATTERY USE• Use only an approved battery.• Keep the battery dry and away from any liquid since this may cause a short circuit.• Keep the battery away from metal objects since this may cause a short circuit.• Do not use damaged or deformed batteries.• If the battery emits a foul odor, discontinue use.• Keep the battery away from babies and small children.• If the battery leaks:• Do not allow the leaking fluid to come in contact with your skin, eyes or clothing. If already in contact, rinse with clean water immediately and seek medical advice.• Keep the battery away from fire since this may cause the battery to explode.• Do not attempt to open or service the battery yourself.• Do not dispose battery in fire or water.• Recycle or dispose used batteries according to the local regulations.ROAD AND ENVIRONMENTAL SAFETY• Turn off the phone in areas with a potentially explosive atmosphere or where flammable objects exist such as gas stations, fuel depots, and chemical plants among others. Sparks from these areas could cause explosion or fire and result in injury or even death.• Do not use hand-held phones while driving a vehicle. Use hands-free devices as an alternative.Quick Start GuideiiSAFETY IN AIRCRAFT• Do not use the phone on board an aircraft. The phone’s network signals may cause interference to the navigation system. As a safety measurement, it is against the law in most countries to use the phone on board an aircraft.DECLARATION OF CONFORMITYHereby, we declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/.Copyright © 2008. All Rights Reserved.FCC NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.WEEE NoticeThe WEEE logo on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserve natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local city center, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.RoHS ComplianceThis product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.0682
iiQuick Start GuideiSafety & Compliance CertificateSAFETY INFORMATION• Use only the batteries and power adapter provided by the manufacturer. The use of unauthorized accessories may void your warranty.• Do not remove the battery while the phone is charging.• Avoid using the phone near electromagnetic souces such as TVs, radios, and microwave ovens.• Unplug the power adapter from the wall outlet during lightning storms to avoid electric shock or fire.• Do not store your phone in temperatures higher than 60ºC or 140ºF.• Do not use harsh chemicals or detergents to clean your phone. • Do not handle the phone with wet hands while it is being charged. This may cause an electric shock or serious damage to the phone.SAFETY PRECAUTIONS FOR BATTERY USE• Use only an approved battery.• Keep the battery dry and away from any liquid since this may cause a short circuit.• Keep the battery away from metal objects since this may cause a short circuit.• Do not use damaged or deformed batteries.• If the battery emits a foul odor, discontinue use.• Keep the battery away from babies and small children.• If the battery leaks:• Do not allow the leaking fluid to come in contact with your skin, eyes or clothing. If already in contact, rinse with clean water immediately and seek medical advice.• Keep the battery away from fire since this may cause the battery to explode.• Do not attempt to open or service the battery yourself.• Do not dispose battery in fire or water.• Recycle or dispose used batteries according to the local regulations.ROAD AND ENVIRONMENTAL SAFETY• Turn off the phone in areas with a potentially explosive atmosphere or where flammable objects exist such as gas stations, fuel depots, and chemical plants among others. Sparks from these areas could cause explosion or fire and result in injury or even death.• Do not use hand-held phones while driving a vehicle. Use hands-free devices as an alternative.Quick Start GuideiiSAFETY IN AIRCRAFT• Do not use the phone on board an aircraft. The phone’s network signals may cause interference to the navigation system. As a safety measurement, it is against the law in most countries to use the phone on board an aircraft.DECLARATION OF CONFORMITYHereby, we declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/.Copyright © 2008. All Rights Reserved.FCC NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.WEEE NoticeThe WEEE logo on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserve natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local city center, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.RoHS ComplianceThis product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.0682
iiiQuick Start GuideiiiEuropean Union Regulatory ConformanceThe equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0–300 GHz). This equipment meets the following conformance standards: EN301489-1, -7, EN 301 511, EN62209-1, EN60950.Changes or modifications to this product not authorized by the manufacturer could void the EMC compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. We, hereby, declare that this cellular radio is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.SAR InformationTHIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 W/kg averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.937 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information can be found on the Cellullar Telecommunications Industry Association (CTIA) website at www.wow-com.com.Quick Start GuideivFCC Regulations:• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.• This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.• The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This model phone meets the government’s requirements for exposure to radio waves.This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest
ivQuick Start GuideiiiEuropean Union Regulatory ConformanceThe equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0–300 GHz). This equipment meets the following conformance standards: EN301489-1, -7, EN 301 511, EN62209-1, EN60950.Changes or modifications to this product not authorized by the manufacturer could void the EMC compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. We, hereby, declare that this cellular radio is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.SAR InformationTHIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 W/kg averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.937 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information can be found on the Cellullar Telecommunications Industry Association (CTIA) website at www.wow-com.com.Quick Start GuideivFCC Regulations:• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.• This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.• The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This model phone meets the government’s requirements for exposure to radio waves.This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest
vQuick Start Guidevcertified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 1.47 W/kg for GSM850 / 0.998 W/kg for PCS1900 and when worn on the body, as described in this user guide, is 0.81 W/kg for GSM850 / 0.252 W/kg for PCS1900.While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: QDJ-0907SEUThis device is compliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.5 cm from your body when the phone is switched on.Quick Start GuideviWarnings and SafetyFollow the below safety instructions to use the phone. - It is safe to point the Solar panel to the sun.- Do not use the unit: - In places which are dusty, damp. In a high humidity area (over 80% rel. humidity). - Temperatures above 60°C to prevent battery damage. -In areas containing inflammable materials (liquids/solvents, gas). - Do not immerse in water.- Use only in closed and dry areas.- Should the unit fail to operate, or show signs of not operating properly unplug immediately and make sure that the unit is not put into further operation. Do not use the unit when visible signs of damage - due to transport or inadequate storage are noticeable.- To prevent the risk of explosion by overcharging, install the battery in a well ventilated place.
viQuick Start Guidevcertified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 1.47 W/kg for GSM850 / 0.998 W/kg for PCS1900 and when worn on the body, as described in this user guide, is 0.81 W/kg for GSM850 / 0.252 W/kg for PCS1900.While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: QDJ-0907SEUThis device is compliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.5 cm from your body when the phone is switched on.Quick Start GuideviWarnings and SafetyFollow the below safety instructions to use the phone. - It is safe to point the Solar panel to the sun.- Do not use the unit: - In places which are dusty, damp. In a high humidity area (over 80% rel. humidity). - Temperatures above 60°C to prevent battery damage. -In areas containing inflammable materials (liquids/solvents, gas). - Do not immerse in water.- Use only in closed and dry areas.- Should the unit fail to operate, or show signs of not operating properly unplug immediately and make sure that the unit is not put into further operation. Do not use the unit when visible signs of damage - due to transport or inadequate storage are noticeable.- To prevent the risk of explosion by overcharging, install the battery in a well ventilated place.

Navigation menu